Junio C Hamano [Sat, 17 Jul 2021 00:42:46 +0000 (17:42 -0700)]
Merge branch 'tb/midx-use-checksum'
When rebuilding the multi-pack index file reusing an existing one,
we used to blindly trust the existing file and ended up carrying
corrupted data into the updated file, which has been corrected.
* tb/midx-use-checksum:
midx: report checksum mismatches during 'verify'
midx: don't reuse corrupt MIDXs when writing
commit-graph: rewrite to use checksum_valid()
csum-file: introduce checksum_valid()
The merge code had funny interactions between content based rename
detection and directory rename detection.
* en/merge-dir-rename-corner-case-fix:
merge-recursive: handle rename-to-self case
merge-ort: ensure we consult df_conflict and path_conflicts
t6423: test directory renames causing rename-to-self
Junio C Hamano [Sat, 17 Jul 2021 00:42:45 +0000 (17:42 -0700)]
Merge branch 'en/ort-perf-batch-13'
Performance tweaks of "git merge -sort" around lazy fetching of objects.
* en/ort-perf-batch-13:
merge-ort: add prefetching for content merges
diffcore-rename: use a different prefetch for basename comparisons
diffcore-rename: allow different missing_object_cb functions
t6421: add tests checking for excessive object downloads during merge
promisor-remote: output trace2 statistics for number of objects fetched
Junio C Hamano [Sat, 17 Jul 2021 00:42:45 +0000 (17:42 -0700)]
Merge branch 'en/ort-perf-batch-12'
More fix-ups and optimization to "merge -sort".
* en/ort-perf-batch-12:
merge-ort: miscellaneous touch-ups
Fix various issues found in comments
diffcore-rename: avoid unnecessary strdup'ing in break_idx
merge-ort: replace string_list_df_name_compare with faster alternative
Junio C Hamano [Tue, 13 Jul 2021 23:52:50 +0000 (16:52 -0700)]
Merge branch 'ab/pickaxe-pcre2'
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
Junio C Hamano [Tue, 13 Jul 2021 23:52:50 +0000 (16:52 -0700)]
Merge branch 'hn/prep-tests-for-reftable'
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
Junio C Hamano [Tue, 13 Jul 2021 23:52:50 +0000 (16:52 -0700)]
Merge branch 'fc/push-simple-updates-cleanup'
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
Junio C Hamano [Thu, 8 Jul 2021 20:15:06 +0000 (13:15 -0700)]
Merge branch 'js/stop-exporting-bogus-columns'
When we cannot figure out how wide the terminal is, we use a
fallback value of 80 ourselves (which cannot be avoided), but when
we run the pager, we export it in COLUMNS, which forces the pager
to use the hardcoded value, even when the pager is perfectly
capable to figure it out itself. Stop exporting COLUMNS when we
fall back on the hardcoded default value for our own use.
* js/stop-exporting-bogus-columns:
pager: avoid setting COLUMNS when we're guessing its value
Junio C Hamano [Thu, 8 Jul 2021 20:15:02 +0000 (13:15 -0700)]
Merge branch 'ab/fix-columns-to-80-during-tests'
Output from some of our tests were affected by the width of the
terminal that they were run in, which has been corrected by
exporting a fixed value in the COLUMNS environment.
* ab/fix-columns-to-80-during-tests:
test-lib.sh: set COLUMNS=80 for --verbose repeatability
Junio C Hamano [Thu, 8 Jul 2021 20:15:01 +0000 (13:15 -0700)]
Merge branch 'jx/sideband-cleanup'
The side-band demultiplexer that is used to display progress output
from the remote end did not clear the line properly when the end of
line hits at a packet boundary, which has been corrected. Also
comes with test clean-ups.
* jx/sideband-cleanup:
test: refactor to use "get_abbrev_oid" to get abbrev oid
test: refactor to use "test_commit" to create commits
test: compare raw output, not mangle tabs and spaces
sideband: don't lose clear-to-eol at packet boundary
Junio C Hamano [Thu, 8 Jul 2021 20:14:58 +0000 (13:14 -0700)]
Merge branch 'ah/uninitialized-reads-fix'
Make the codebase MSAN clean.
* ah/uninitialized-reads-fix:
builtin/checkout--worker: zero-initialise struct to avoid MSAN complaints
split-index: use oideq instead of memcmp to compare object_id's
bulk-checkin: make buffer reuse more obvious and safer
Junio C Hamano [Thu, 8 Jul 2021 20:14:58 +0000 (13:14 -0700)]
Merge branch 'dd/svn-test-wo-locale-a'
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
Jeff King [Wed, 16 Jun 2021 10:23:07 +0000 (06:23 -0400)]
test-lib: avoid accidental globbing in match_pattern_list()
We have a custom match_pattern_list() function which we use for matching
test names (like "t1234") against glob-like patterns (like "t1???") for
$GIT_SKIP_TESTS, --verbose-only, etc.
Those patterns may have multiple whitespace-separated elements (e.g.,
"t0* t1234 t5?78"). The callers of match_pattern_list thus pass the
strings unquoted, so that the shell does the usual field-splitting into
separate arguments.
But this also means the shell will do the usual globbing for each
argument, which can result in us seeing an expansion based on what's in
the filesystem, rather than the real pattern. For example, if I have the
path "t5000" in the filesystem, and you feed the pattern "t?000", that
_should_ match the string "t0000", but it won't after the shell has
expanded it to "t5000".
This has been a bug ever since that function was introduced. But it
didn't usually trigger since we typically use the function inside the
trash directory, which has a very limited set of files that are unlikely
to match. It became a lot easier to trigger after edc23840b0 (test-lib:
bring $remove_trash out of retirement, 2021-05-10), because now we match
$GIT_SKIP_TESTS before even entering the trash directory. So the t5000
example above can be seen with:
GIT_SKIP_TESTS=t?000 ./t0000-basic.sh
which should skip all tests but doesn't.
We can fix this by using "set -f" to ask the shell not to glob (which is
in POSIX, so should hopefully be portable enough). We only want to do
this in a subshell (to avoid polluting the rest of the script), which
means we need to get the whole string intact into the match_pattern_list
function by quoting it. Arguably this is a good idea anyway, since it
makes it much more obvious that we intend to split, and it's not simply
sloppy scripting.
Diagnosed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 30 Jun 2021 17:30:00 +0000 (17:30 +0000)]
merge-recursive: handle rename-to-self case
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us
A/file -> C/file
However, when C/ == A/, note that this gives us
A/file -> A/file.
merge-recursive assumed that any rename D -> E would have D != E. While
that is almost always true, the above is a special case where it is not.
So we cannot do things like delete the rename source, we cannot assume
that a file existing at path E implies a rename/add conflict and we have
to be careful about what stages end up in the output.
This change feels a bit hackish. It took me surprisingly many hours to
find, and given merge-recursive's design causing it to attempt to
enumerate all combinations of edge and corner cases with special code
for each combination, I'm worried there are other similar fixes needed
elsewhere if we can just come up with the right special testcase.
Perhaps an audit would rule it out, but I have not the energy.
merge-recursive deserves to die, and since it is on its way out anyway,
fixing this particular bug narrowly will have to be good enough.
Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 30 Jun 2021 17:29:59 +0000 (17:29 +0000)]
merge-ort: ensure we consult df_conflict and path_conflicts
Path conflicts (typically rename path conflicts, e.g.
rename/rename(1to2) or rename/add/delete), and directory/file conflicts
should obviously result in files not being marked as clean in the merge.
We had a codepath where we missed consulting the path_conflict and
df_conflict flags, based on match_mask. Granted, it requires an unusual
setup to trigger this codepath (directory rename causing rename-to-self
is the only case I can think of), but we still need to handle it. To
make it clear that we have audited the other codepaths that do not
explicitly mention these flags, add some assertions that the flags are
not set.
Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 30 Jun 2021 17:29:58 +0000 (17:29 +0000)]
t6423: test directory renames causing rename-to-self
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us C/file.
Since the default for merge.directoryRenames is conflict, this results
in an error message saying it is unclear whether the file should be
placed at B/file or C/file.
What if C/ is A/, though? In such a case, the transitive rename would
give us A/file, the original name we started with. Logically, having
an error message with B/file vs. A/file should be fine, as should
leaving the file where it started. But the logic in both
merge-recursive and merge-ort did not handle a case of a filename being
renamed to itself correctly; merge-recursive had two bugs, and merge-ort
had one. Add some testcases covering such a scenario.
Based-on-testcase-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 30 Jun 2021 16:12:43 +0000 (18:12 +0200)]
grep: report missing left operand of --and
Git grep allows combining two patterns with --and. It checks and
reports if the second pattern is missing when compiling the expression.
A missing first pattern, however, is only reported later at match time.
Thus no error is returned if no matching is done, e.g. because no file
matches the also given pathspec.
When that happens we get an expression tree with an GREP_NODE_AND node
and a NULL pointer to the missing left child. free_pattern_expr()
tries to dereference it during the cleanup at the end, which results
in a segmentation fault.
Fix this by verifying the presence of the left operand at expression
compilation time.
Reported-by: Matthew Hughes <matthewhughes934@gmail.com> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib.sh: set COLUMNS=80 for --verbose repeatability
Some tests will fail under --verbose because while we've unset COLUMNS
since b1d645b58ac (tests: unset COLUMNS inherited from environment,
2012-03-27), we also look for the columns with an ioctl(..,
TIOCGWINSZ, ...) on some platforms. By setting COLUMNS again we
preempt the TIOCGWINSZ lookup in pager.c's term_columns(), it'll take
COLUMNS over TIOCGWINSZ,
This fixes t0500-progress-display.sh., which broke because of a
combination of the this issue and the progress output reacting to the
column width since 545dc345ebd (progress: break too long progress bar
lines, 2019-04-12). The t5324-split-commit-graph.sh fails in a similar
manner due to progress output, see [1] for details.
The issue is not specific to progress.c, the diff code also checks
COLUMNS and some of its tests can be made to fail in a similar
manner[2], anything that invokes a pager is potentially affected.
See ea77e675e56 (Make "git help" react to window size correctly,
2005-12-18) and ad6c3739a33 (pager: find out the terminal width before
spawning the pager, 2012-02-12) for how the TIOCGWINSZ code ended up
in pager.c
Taylor Blau [Wed, 23 Jun 2021 18:39:15 +0000 (14:39 -0400)]
midx: report checksum mismatches during 'verify'
'git multi-pack-index verify' inspects the data in an existing MIDX for
correctness by checking that the recorded object offsets are correct,
and so on.
But it does not check that the file's trailing checksum matches the data
that it records. So, if an on-disk corruption happened to occur in the
final few bytes (and all other data was recorded correctly), we would:
- get a clean result from 'git multi-pack-index verify', but
- be unable to reuse the existing MIDX when writing a new one (since
we now check for checksum mismatches before reusing a MIDX)
Teach the 'verify' sub-command to recognize corruption in the checksum
by calling midx_checksum_valid().
Suggested-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 23 Jun 2021 18:39:12 +0000 (14:39 -0400)]
midx: don't reuse corrupt MIDXs when writing
When writing a new multi-pack index, Git tries to reuse as much of the
data from an existing MIDX as possible, like object offsets. This is
done to avoid re-opening a bunch of *.idx files unnecessarily, but can
lead to problems if the data we are reusing is corrupt.
That's because we'll blindly reuse data from an existing MIDX without
checking its trailing checksum for validity. So if there is memory
corruption while writing a MIDX, or disk corruption in the intervening
period between writing and reuse, we'll blindly propagate those bad
values forward.
Suppose we experience a memory corruption while writing a MIDX such that
we write an incorrect object offset (or alternatively, the disk corrupts
the data after being written, but before being reused). Then when we go
to write a new MIDX, we'll reuse the bad object offset without checking
its validity. This means that the MIDX we just wrote is broken, but its
trailing checksum is in-tact, since we never bothered to look at the
values before writing.
In the above, a "git multi-pack-index verify" would have caught the
problem before writing, but writing a new MIDX wouldn't have noticed
anything wrong, blindly carrying forward the corrupt offset.
Individual pack indexes check their validity by verifying the crc32
attached to each entry when carrying data forward during a repack.
We could solve this problem for MIDXs in the same way, but individual
crc32's don't make much sense, since their entries are so small.
Likewise, checking the whole file on every read may be prohibitively
expensive if a repository has a lot of objects, packs, or both.
But we can check the trailing checksum when reusing an existing MIDX
when writing a new one. And a corrupt MIDX need not stop us from writing
a new one, since we can just avoid reusing the existing one at all and
pretend as if we are writing a new MIDX from scratch.
Suggested-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 23 Jun 2021 18:39:09 +0000 (14:39 -0400)]
commit-graph: rewrite to use checksum_valid()
Rewrite an existing caller in `git commit-graph verify` to take
advantage of checksum_valid().
Note that the replacement isn't a verbatim cut-and-paste, since the new
function avoids using hashfile at all and instead talks to the_hash_algo
directly, but it is functionally equivalent.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 23 Jun 2021 18:39:07 +0000 (14:39 -0400)]
csum-file: introduce checksum_valid()
Introduce a new function which checks the validity of a file's trailing
checksum. This is similar to hashfd_check(), but different since it is
intended to be used by callers who aren't writing the same data (like
`git index-pack --verify`), but who instead want to validate the
integrity of data that they are reading.
Rewrite the first of two callers which could benefit from this new
function in pack-check.c. Subsequent callers will be added in the
following patches.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pager: avoid setting COLUMNS when we're guessing its value
We query `TIOCGWINSZ` in Git to determine the correct value for
`COLUMNS`, and then set that environment variable.
If `TIOCGWINSZ` is not available, we fall back to the hard-coded value
80 _and still_ set the environment variable.
On Windows this is a problem. The reason is that Git for
Windows uses a version of `less` that relies on the MSYS2 runtime to
interact with the pseudo terminal (typically inside a MinTTY window,
which is also aware of the MSYS2 runtime). Both MinTTY and `less.exe`
interact with that pseudo terminal via `ioctl()` calls (which the MSYS2
runtime emulates even if there is no such thing on Windows).
Since https://github.com/gwsw/less/commit/bb0ee4e76c2, `less` prefers
the `COLUMNS` variable over asking ncurses itself.
But `git.exe` itself is _not_ aware of the MSYS2 runtime, or for that
matter of that pseudo terminal, and has no way to call `ioctl()` or
`TIOCGWINSZ`.
Therefore, `git.exe` will fall back to hard-coding 80 columns, no matter
what the actual terminal size is.
But `less.exe` is totally able to interact with the MSYS2 runtime and
would not actually require Git's help (which actually makes things
worse here). So let's not override `COLUMNS` on Windows.
Let's just not set `COLUMNS` unless we managed to query the actual value
from the terminal.
This fixes https://github.com/git-for-windows/git/issues/3235
Co-authored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Fri, 25 Jun 2021 19:38:50 +0000 (21:38 +0200)]
t: fix typos in test messages
Both in t4258 and in t9001, the code of the tests following shows the
proper name for the configuration variables. So use the correct names
in the test messages as well.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
dorgon.chang [Mon, 21 Jun 2021 05:16:13 +0000 (05:16 +0000)]
git-p4: fix failed submit by skip non-text data files
If the submit contain binary files, it will throw exception and stop submit when try to append diff line description.
This commit will skip non-text data files when exception UnicodeDecodeError thrown.
The skip will not affect actual submit files in the resulting cl,
the diff line description will only appear in submit template,
so you can review what changed before actully submit to p4.
I don't know if add any message here will be helpful for users,
so I choose to just skip binary content, since it already append filename previously.
Signed-off-by: dorgon.chang <dorgonman@hotmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Jun 2021 08:04:41 +0000 (08:04 +0000)]
merge-ort: add prefetching for content merges
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-05)
introduced batching of fetching missing blobs, so that the diff
machinery would have one fetch subprocess grab N blobs instead of N
processes each grabbing 1.
However, the diff machinery is not the only thing in a merge that needs
to work on blobs. The 3-way content merges need them as well. Rather
than download all the blobs 1 at a time, prefetch all the blobs needed
for regular content merges.
This does not cover all possible paths in merge-ort that might need to
download blobs. Others include:
- The blob_unchanged() calls to avoid modify/delete conflicts (when
blob renormalization results in an "unchanged" file)
- Preliminary content merges needed for rename/add and
rename/rename(2to1) style conflicts. (Both of these types of
conflicts can result in nested conflict markers from the need to do
two levels of content merging; the first happens before our new
prefetch_for_content_merges() function.)
The first of these wouldn't be an extreme amount of work to support, and
even the second could be theoretically supported in batching, but all of
these cases seem unusual to me, and this is a minor performance
optimization anyway; in the worst case we only get some of the fetches
batched and have a few additional one-off fetches. So for now, just
handle the regular 3-way content merges in our prefetching.
For the testcase from the previous commit, the number of downloaded
objects remains at 63, but this drops the number of fetches needed from
32 down to 20, a sizeable reduction.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Jun 2021 08:04:40 +0000 (08:04 +0000)]
diffcore-rename: use a different prefetch for basename comparisons
merge-ort was designed to minimize the amount of data needed and used,
and several changes were made to diffcore-rename to take advantage of
extra metadata to enable this data minimization (particularly the
relevant_sources variable for skipping "irrelevant" renames). This
effort obviously succeeded in drastically reducing computation times,
but should also theoretically allow partial clones to download much less
information. Previously, though, the "prefetch" command used in
diffcore-rename had never been modified and downloaded many blobs that
were unnecessary for merge-ort. This commit corrects that.
When doing basename comparisons, we want to fetch only the objects that
will be used for basename comparisons. If after basename fetching this
leaves us with no more relevant sources (or no more destinations), then
we won't need to do the full inexact rename detection and can skip
downloading additional source and destination files. Even if we have to
do that later full inexact rename detection, irrelevant sources are
culled after basename matching and before the full inexact rename
detection, so we can still avoid downloading the blobs for irrelevant
sources. Rename prefetch() to inexact_prefetch(), and introduce a
new basename_prefetch() to take advantage of this.
If we modify the testcase from commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2021-01-23)
to pass
--sparse --filter=blob:none
to the clone command, and use the new trace2 "fetch_count" output from
a few commits ago to track both the number of fetch subcommands invoked
and the number of objects fetched across all those fetches, then for
the mega-renames testcase we observe the following:
BEFORE this commit, rebasing 35 patches:
strategy # of fetches total # of objects fetched
--------- ------------ --------------------------
recursive 62 11423
ort 30 11391
AFTER this commit, rebasing the same 35 patches:
ort 32 63
This means that the new code only needs to download less than 2 blobs
per patch being rebased. That is especially interesting given that the
repository at the start only had approximately half a dozen TOTAL blobs
downloaded to start with (because the default sparse-checkout of just
the toplevel directory was in use).
So, for this particular linux kernel testcase that involved ~26,000
renames on the upstream side (drivers/ -> pilots/) across which 35
patches were being rebased, this change reduces the number of blobs that
need to be downloaded by a factor of ~180.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 22 Jun 2021 08:04:39 +0000 (08:04 +0000)]
diffcore-rename: allow different missing_object_cb functions
estimate_similarity() was setting up a diff_populate_filespec_options
every time it was called, requiring the caller of estimate_similarity()
to pass in some data needed to set up this option. Currently the needed
data consisted of a single variable (skip_unmodified), but we want to
also have the different estimate_similarity() callsites start using
different missing_object_cb functions as well. Rather than also passing
that data in, just have the caller pass in the whole
diff_populate_filespec_options, and reduce the number of times we need to
set it up.
As a side note, this also drops the number of calls to
has_promisor_remote() dramatically. If L is the number of basename
paths to compare, M is the number of inexact sources, and N is the
number of inexact destinations, then the number of calls to
has_promisor_remote() drops from L+M*N down to at most 2 -- one for each
of the sites that calls estimate_similarity(). has_promisor_remote() is
a very fast function so this almost certainly has no measurable
performance impact, but it seems cleaner to avoid calling that function
so many times.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Thu, 17 Jun 2021 16:17:08 +0000 (11:17 -0500)]
pull: cleanup autostash check
Currently "git pull --rebase" takes a shortcut in the case a
fast-forward merge is possible; run_merge() is called with --ff-only.
However, "git merge" didn't have an --autostash option, so, when "git
pull --rebase --autostash" was called *and* the fast-forward merge
shortcut was taken, then the pull failed.
This was fixed in commit f15e7cf5cc (pull: ff --rebase --autostash
works in dirty repo, 2017-06-01) by simply skipping the fast-forward
merge shortcut.
Later on "git merge" learned the --autostash option [a03b55530a
(merge: teach --autostash option, 2020-04-07)], and so did "git pull"
[d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)].
Therefore it's not necessary to skip the fast-forward merge shortcut
anymore when called with --rebase --autostash.
Let's always take the fast-forward merge shortcut by essentially
reverting f15e7cf5cc.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: bash: fix late declaration of __git_cmd_idx
A recent update to contrib/completion/git-completion.bash causes bash to fail
auto complete custom commands that are wrapped with __git_func_wrap. Declaring
__git_cmd_idx=0 inside __git_func_wrap resolves the issue.
Signed-off-by: Fabian Wermelinger <fabianw@mavt.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 18 Jun 2021 16:32:22 +0000 (12:32 -0400)]
t: use portable wrapper for readlink(1)
Not all systems have a readlink program available for use by the shell.
This causes t3210 to fail on at least AIX. Let's provide a perl
one-liner to do the same thing, and use it there.
I also updated calls in t9802. Nobody reported failure there, but it's
the same issue. Presumably nobody actually tests with p4 on AIX in the
first place (if it is even available there).
I left the use of readlink in the "--valgrind" setup in test-lib.sh, as
valgrind isn't available on exotic platforms anyway (and I didn't want
to increase dependencies between test-lib.sh and test-lib-functions.sh).
There's one other curious case. Commit d2addc3b96 (t7800: readlink may
not be available, 2016-05-31) fixed a similar case. We can't use our
wrapper function there, though, as it's inside a sub-script triggered by
Git. It uses a slightly different technique ("ls" piped to "sed"). I
chose not to use that here as it gives confusing "ls -l" output if the
file is unexpectedly not a symlink (which is OK for its limited use, but
potentially confusing for general use within the test suite). The perl
version emits the empty string.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 17 Jun 2021 03:17:27 +0000 (11:17 +0800)]
test: refactor to use "get_abbrev_oid" to get abbrev oid
Add new function "get_abbrev_oid" to get abbrev object ID. This
function has a default value which helps to prepare a nonempty replace
pattern for sed command. An empty replace pattern may cause sed fail
to allocate memory.
Refactor function "make_user_friendly_and_stable_output" to use
"get_abbrev_oid" to get abbrev object ID.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 17 Jun 2021 03:17:25 +0000 (11:17 +0800)]
test: compare raw output, not mangle tabs and spaces
Before comparing with the expect file, we used to call function
"make_user_friendly_and_stable_output" to filter out trailing spaces in
output. Ævar recommends using pattern "s/Z$//" to prepare expect file,
and then compare it with raw output.
Since we have fixed the issue of occasionally missing the clear-to-eol
suffix when displaying sideband #2 messages, it is safe and stable to
test against raw output.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 17 Jun 2021 03:17:24 +0000 (11:17 +0800)]
sideband: don't lose clear-to-eol at packet boundary
When "demultiplex_sideband()" sees a nonempty message ending with CR or
LF on the sideband #2, it adds "suffix" string to clear to the end of
the current line, which helps when relaying a progress display whose
records are terminated with CRs. But if it sees a single LF, no
clear-to-end suffix should be appended, because this single LF is used
to end the progress display by moving to the next line, and the final
progress display above should be preserved.
However, the code forgot that depending on the length of the payload
line, such a CR may fall exactly at the packet boundary and the
number of bytes before the CR from the beginning of the packet could
be zero. In such a case, the message that was terminated by the CR
were leftover in the "scratch" buffer in the previous call to the
function and we still need to clear to the end of the current line.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 17 Jun 2021 03:14:11 +0000 (11:14 +0800)]
t6020: fix incompatible parameter expansion
Ævar reported that the function `make_user_friendly_and_stable_output()`
failed on a i386 box (gcc45) in the gcc farm boxes with error:
sed: couldn't re-allocate memory
It turns out that older versions of bash (4.3) or dash (0.5.7) cannot
evaluate expression like `${A%${A#???????}}` used to get the leading 7
characters of variable A.
Replace the incompatible parameter expansion so that t6020 works on
older version of bash or dash.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
public record Person(string FirstName, string LastName);
For more information, see:
* https://docs.microsoft.com/en-us/dotnet/csharp/whats-new/csharp-9
Signed-off-by: Julian Verdurmen <julian.verdurmen@outlook.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pre-commit hook tests: don't leave "actual" nonexisting on failure
Start by creating an "actual" file in a core.hooksPath test that has
the hook echoing to the "actual" file.
We later test_cmp that file to see what hooks were run. If we fail to
run our hook(s) we'll have an empty list of hooks for the test_cmp
instead of a nonexisting file. For the logic of this test that makes more sense.
See 867ad08a261 (hooks: allow customizing where the hook directory is,
2016-05-04) for the commit that added these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrzej Hunt [Mon, 14 Jun 2021 15:51:16 +0000 (15:51 +0000)]
builtin/checkout--worker: zero-initialise struct to avoid MSAN complaints
report_result() sends a struct to the parent process, but that struct
would contain uninitialised padding bytes. Running this code under MSAN
rightly triggers a warning - but we don't particularly care about this
warning because we control the receiving code, and we therefore know
that those padding bytes won't be read on the receiving end.
We could simply suppress this warning under MSAN with the approporiate
ifdef'd attributes, but a less intrusive solution is to 0-initialise the
struct, which guarantees that the padding will also be initialised.
Interestingly, in the error-case branch, we only try to copy the first
two members of pc_item_result, by copying only PC_ITEM_RESULT_BASE_SIZE
bytes. However PC_ITEM_RESULT_BASE_SIZE is defined as
'offsetof(the_last_member)', which means that we're copying padding bytes
after the end of the second last member. We could avoid doing this by
redefining PC_ITEM_RESULT_BASE_SIZE as
'offsetof(second_last_member) + sizeof(second_last_member)', but there's
no huge benefit to doing so (and this patch silences the MSAN warning in
this scenario either way).
MSAN output from t2080 (partially interleaved due to the
parallel work :) ):
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7fff37d83408, 160)
==23279==WARNING: MemorySanitizer: use-of-uninitialized-value
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7ffdb8a07ec8, 160)
==23280==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c:100:3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f8778114349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Exiting
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c:100:3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f2749a0e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrzej Hunt [Mon, 14 Jun 2021 15:51:15 +0000 (15:51 +0000)]
split-index: use oideq instead of memcmp to compare object_id's
cache_entry contains an object_id, and compare_ce_content() would
include that field when calling memcmp on a subset of the cache_entry.
Depending on which hashing algorithm is being used, only part of
object_id.hash is actually being used, therefore including it in a
memcmp() is incorrect. Instead we choose to exclude the object_id when
calling memcmp(), and call oideq() separately.
This issue was found when running t1700-split-index with MSAN, see MSAN
output below (on my machine, offset 76 corresponds to 4 bytes after the
start of object_id.hash).
Uninitialized bytes in MemcmpInterceptorCommon at offset 76 inside [0x7f60e7c00118, 92)
==27914==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x4524ee in memcmp /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10
#1 0xc867ae in compare_ce_content /home/ahunt/git/git/split-index.c:208:8
#2 0xc859fb in prepare_to_write_split_index /home/ahunt/git/git/split-index.c:336:9
#3 0xb4bbca in write_split_index /home/ahunt/git/git/read-cache.c:3107:2
#4 0xb42b4d in write_locked_index /home/ahunt/git/git/read-cache.c:3295:8
#5 0x638058 in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:758:7
#6 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0xb4d1e6 in dup_cache_entry /home/ahunt/git/git/read-cache.c:3457:2
#2 0xd214fa in add_entry /home/ahunt/git/git/unpack-trees.c:215:18
#3 0xd1fae0 in keep_entry /home/ahunt/git/git/unpack-trees.c:2276:2
#4 0xd1ff9e in twoway_merge /home/ahunt/git/git/unpack-trees.c:2504:11
#5 0xd27028 in call_unpack_fn /home/ahunt/git/git/unpack-trees.c:593:12
#6 0xd2443d in unpack_nondirectories /home/ahunt/git/git/unpack-trees.c:1106:12
#7 0xd19435 in unpack_callback /home/ahunt/git/git/unpack-trees.c:1306:6
#8 0xd0d7ff in traverse_trees /home/ahunt/git/git/tree-walk.c:532:17
#9 0xd1773a in unpack_trees /home/ahunt/git/git/unpack-trees.c:1683:9
#10 0xdc6370 in checkout /home/ahunt/git/git/merge-ort.c:3590:8
#11 0xdc51c3 in merge_switch_to_result /home/ahunt/git/git/merge-ort.c:3728:7
#12 0xa195a9 in merge_ort_recursive /home/ahunt/git/git/merge-ort-wrappers.c:58:2
#13 0x637fff in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:751:12
#14 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#15 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#16 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#17 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#18 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#19 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
Uninitialized value was created by a heap allocation
#0 0x44e73d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:901:3
#1 0xd592f6 in do_xmalloc /home/ahunt/git/git/wrapper.c:41:8
#2 0xd59248 in xmalloc /home/ahunt/git/git/wrapper.c:62:9
#3 0xa17088 in mem_pool_alloc_block /home/ahunt/git/git/mem-pool.c:22:6
#4 0xa16f78 in mem_pool_init /home/ahunt/git/git/mem-pool.c:44:3
#5 0xb481b8 in load_all_cache_entries /home/ahunt/git/git/read-cache.c
#6 0xb44d40 in do_read_index /home/ahunt/git/git/read-cache.c:2298:17
#7 0xb48a1b in read_index_from /home/ahunt/git/git/read-cache.c:2389:8
#8 0xbd5a0b in repo_read_index /home/ahunt/git/git/repository.c:276:8
#9 0xb4bcaf in repo_read_index_unmerged /home/ahunt/git/git/read-cache.c:3326:2
#10 0x62ed26 in cmd_merge /home/ahunt/git/git/builtin/merge.c:1362:6
#11 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#12 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#13 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#14 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#15 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#16 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10 in memcmp
Exiting
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
subtree: fix assumption about the directory separator
On Windows, both forward and backslash are valid separators. In 22d550749361 (subtree: don't fuss with PATH, 2021-04-27), however, we
added code that assumes that it can only be the forward slash.
Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
subtree: fix the GIT_EXEC_PATH sanity check to work on Windows
In 22d550749361 (subtree: don't fuss with PATH, 2021-04-27), `git
subtree` was broken thoroughly on Windows.
The reason is that it assumes Unix semantics, where `PATH` is
colon-separated, and it assumes that `$GIT_EXEC_PATH:` is a verbatim
prefix of `$PATH`. Neither are true, the latter in particular because
`GIT_EXEC_PATH` is a Windows-style path, while `PATH` is a Unix-style
path list.
Let's make extra certain that `$GIT_EXEC_PATH` and the first component
of `$PATH` refer to different entities before erroring out.
We do that by using the `test <path1> -ef <path2>` command that verifies
that the inode of `<path1>` and of `<path2>` is the same.
Sadly, this construct is non-portable, according to
https://pubs.opengroup.org/onlinepubs/009695399/utilities/test.html.
However, it does not matter in practice because we still first look
whether `$GIT_EXEC_PREFIX` is string-identical to the first component of
`$PATH`. This will give us the expected result everywhere but in Git for
Windows, and Git for Windows' own Bash _does_ handle the `-ef` operator.
Just in case that we _do_ need to show the error message _and_ are
running in a shell that lacks support for `-ef`, we simply suppress the
error output for that part.
This fixes https://github.com/git-for-windows/git/issues/3260
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 14 Jun 2021 12:05:44 +0000 (08:05 -0400)]
bitmaps: don't recurse into trees already in the bitmap
If an object is already mentioned in a reachability bitmap we are
building, then by definition so are all of the objects it can reach. We
have an optimization to stop traversing commits when we see they are
already in the bitmap, but we don't do the same for trees.
It's generally unavoidable to recurse into trees for commits not yet
covered by bitmaps (since most commits generally do have unique
top-level trees). But they usually have subtrees that are shared with
other commits (i.e., all of the subtrees the commit _didn't_ touch). And
some of those commits (and their trees) may be covered by the bitmap.
Usually this isn't _too_ big a deal, because we'll visit those subtrees
only once in total for the whole walk. But if you have a large number of
unbitmapped commits, and if your tree is big, then you may end up
opening a lot of sub-trees for no good reason.
We can use the same optimization we do for commits here: when we are
about to open a tree, see if it's in the bitmap (either the one we are
building, or the "seen" bitmap which covers the UNINTERESTING side of
the bitmap when doing a set-difference).
This works especially well because we'll visit all commits before
hitting any trees. So even in a history like:
A -- B
if "A" has a bitmap on disk but "B" doesn't, we'll already have OR-ed in
the results from A before looking at B's tree (so we really will only
look at trees touched by B).
For most repositories, the timings produced by p5310 are unspectacular.
Here's linux.git:
Any improvement there is within the noise (the +3.1% on test 7 has to be
noise, since we are not recursing into trees, and thus the new code
isn't even run). The results for git.git are likewise uninteresting.
But here are numbers from some other real-world repositories (that are
not public). This one's tree is comparable in size to linux.git, but has
~16k refs (and so less complete bitmap coverage):
This patch provides substantial improvements in these larger cases, and
have any drawbacks for smaller ones (the cost of the bitmap check is
quite small compared to an actual tree traversal).
Note that we have to add a version of revision.c's include_check
callback which handles non-commits. We could possibly consolidate this
into a single callback for all objects types, as there's only one user
of the feature which would need converted (pack-bitmap.c:should_include).
That would in theory let us avoid duplicating any logic. But when I
tried it, the code ended up much worse to read, with lots of repeated
"if it's a commit do this, otherwise do that". Having two separate
callbacks splits that naturally, and matches the existing split of
show_commit/show_object callbacks.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 14 Jun 2021 04:33:29 +0000 (13:33 +0900)]
Merge branch 'ab/test-lib-updates'
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
Junio C Hamano [Mon, 14 Jun 2021 04:33:27 +0000 (13:33 +0900)]
Merge branch 'so/log-m-implies-p'
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Junio C Hamano [Mon, 14 Jun 2021 04:33:26 +0000 (13:33 +0900)]
Merge branch 'en/ort-perf-batch-11'
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
projects / thirdparty / git.git / log
