Ming Lei [Thu, 9 Feb 2023 12:55:27 +0000 (20:55 +0800)]
block: sync mixed merged request's failfast with 1st bio's
We support mixed merge for requests/bios with different fastfail
settings. When request fails, each time we only handle the portion
with same failfast setting, then bios with failfast can be failed
immediately, and bios without failfast can be retried.
The idea is pretty good, but the current implementation has several
defects:
1) initially RA bio doesn't set failfast, however bio merge code
doesn't consider this point, and just check its failfast setting for
deciding if mixed merge is required. Fix this issue by adding helper
of bio_failfast().
2) when merging bio to request front, if this request is mixed
merged, we have to sync request's faifast setting with 1st bio's
failfast. Fix it by calling blk_update_mixed_merge().
3) when merging bio to request back, if this request is mixed
merged, we have to mark the bio as failfast, because blk_update_request
simply updates request failfast with 1st bio's failfast. Fix
it by calling blk_update_mixed_merge().
Fixes one normal EXT4 READ IO failure issue, because it is observed
that the normal READ IO is merged with RA IO, and the mixed merged
request has different failfast setting with 1st bio's, so finally
the normal READ IO doesn't get retried.
Cc: Tejun Heo <tj@kernel.org> Fixes: 80a761fd33cf ("block: implement mixed merge of different failfast requests") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230209125527.667004-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Fri, 10 Feb 2023 18:03:46 +0000 (10:03 -0800)]
nvme-pci: fix freeing single sgl
There may only be a single DMA mapped entry from multiple physical
segments, which means we don't allocate a separte SGL list. Check the
number of allocations prior to know if we need to free something.
Freeing a single list allocation is the same for both PRP and SGL
usages, so we don't need to check the use_sgl flag anymore.
Liu Xiaodong [Fri, 10 Feb 2023 14:13:56 +0000 (09:13 -0500)]
block: ublk: check IO buffer based on flag need_get_data
Currently, uring_cmd with UBLK_IO_FETCH_REQ or
UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether
userspace server has provided IO buffer even flag
UBLK_F_NEED_GET_DATA is configured.
This is a excessive check. If UBLK_F_NEED_GET_DATA is
configured, FETCH_RQ doesn't need to provide IO buffer;
COMMIT_AND_FETCH_REQ also doesn't need to do that if
the IO type is not READ.
Check ub_cmd->addr together with ublk_need_get_data()
and IO type in ublk_ch_uring_cmd().
With this fix, userspace server doesn't need to preserve
buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA
is configured, in order to save memory.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com> Fixes: c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qiheng Lin [Fri, 10 Feb 2023 00:02:53 +0000 (01:02 +0100)]
s390/dasd: Fix potential memleak in dasd_eckd_init()
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
Xiao Ni [Thu, 9 Feb 2023 03:19:30 +0000 (11:19 +0800)]
block: Merge bio before checking ->cached_rq
It checks if plug->cached_rq is empty before merging bio. But the merge action
doesn't have relationship with plug->cached_rq, it trys to merge bio with
requests within plug->mq_list. Now it checks if ->cached_rq is empty before
merging bio. If it's empty, it will miss the merge chances. So move the merge
function before checking ->cached_rq.
blk-cgroup: delay calling blkcg_exit_disk until disk_release
While del_gendisk ensures there is no outstanding I/O on the queue,
it can't prevent block layer users from building new I/O.
This leads to a NULL ->root_blkg reference in bio_associate_blkg when
allocating a new bio on a shut down file system. Delay freeing the
blk-cgroup subsystems from del_gendisk until disk_release to make
sure the blkg and throttle information is still avaіlable for bio
submitters, even if those bios will immediately fail.
This now can cause a case where disk_release is called on a disk
that hasn't been added. That's mostly harmless, except for a case
in blk_throttl_exit that now needs to check for a NULL ->td pointer.
Fixes: 178fa7d49815 ("blk-cgroup: delay blk-cgroup initialization until add_disk") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230208063514.171485-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiao Ni [Fri, 3 Feb 2023 05:13:44 +0000 (13:13 +0800)]
md: account io_acct_set usage with active_io
io_acct_set was enabled for raid0/raid5 io accounting. bios that contain
md_io_acct are allocated in the i/o path. There isn't a good method to
monitor if these bios are all finished and freed. In the takeover process,
io_acct_set (which is used for bios with md_io_acct) need to be freed.
However, if some bios finish after io_acct_set is freed, it may trigger
the following panic:
Fix this by increasing and decreasing active_io for each bio with
md_io_acct so that mddev_suspend() will wait until all bios from
io_acct_set finish before freeing io_acct_set.
Reported-by: Fine Fan <ffan@redhat.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org>
Ming Lei [Tue, 7 Feb 2023 15:07:00 +0000 (23:07 +0800)]
block: ublk: improve handling device deletion
Inside ublk_ctrl_del_dev(), when the device is removed, we wait
until the device number is freed with holding global lock of
ublk_ctl_mutex, this way isn't friendly from user viewpoint:
1) if device is in-use, the current delete command hangs in
ublk_ctrl_del_dev(), and user can't break from the handling
because wait_event() is used
2) global lock is held, so any new device can't be added and
other old devices can't be removed.
Improve the deleting handling by the following way, suggested by
Nadav:
1) wait without holding the global lock
2) replace wait_event() with wait_event_interruptible()
Yu Kuai [Thu, 2 Feb 2023 13:49:13 +0000 (21:49 +0800)]
block, bfq: cleanup 'bfqg->online'
After commit dfd6200a0954 ("blk-cgroup: support to track if policy is
online"), there is no need to do this again in bfq.
However, 'pd->online' is not protected by 'bfqd->lock', in order to make
sure bfq won't see that 'pd->online' is still set after bfq_pd_offline(),
clear it before bfq_pd_offline() is called. This is fine because other
polices doesn't use 'pd->online' and bfq_pd_offline() will move active
bfqq to root cgroup anyway.
Jens Axboe [Tue, 7 Feb 2023 14:22:58 +0000 (07:22 -0700)]
Merge tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme into for-6.3/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.3
- small improvements to the logging functionality (Amit Engel)
- authentication cleanups (Hannes Reinecke)
- cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- work around the command effects for Format NVM (Keith Busch)
- misc cleanups (Keith Busch, Christoph Hellwig)"
* tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme:
nvme: mask CSE effects for security receive
nvme: always initialize known command effects
nvmet: for nvme admin set_features cmd, call nvmet_check_data_len_lte()
nvme-tcp: add additional info for nvme_tcp_timeout log
nvme: add nvme_opcode_str function for all nvme cmd types
nvme: remove nvme_execute_passthru_rq
nvme-pci: place descriptor addresses in iod
nvme-pci: use mapped entries for sgl decision
nvme-pci: remove SGL segment descriptors
nvme-auth: don't use NVMe status codes
nvme-fabrics: clarify AUTHREQ result handling
Ziyang Zhang [Tue, 7 Feb 2023 07:08:39 +0000 (15:08 +0800)]
ublk: pass NULL to blk_mq_alloc_disk() as queuedata
queuedata is not referenced in ublk_drv and we can use driver_data
instead. Pass NULL to blk_mq_alloc_disk() as queuedata while allocating
ublk's gendisk.
trace/blktrace: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Kemeng Shi [Wed, 18 Jan 2023 09:37:26 +0000 (17:37 +0800)]
blk-mq: correct stale comment of .get_budget
Commit 88022d7201e96 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes: 88022d7201e9 ("blk-mq: don't handle failure in .get_budget") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:24 +0000 (17:37 +0800)]
blk-mq: remove set of bd->last when get driver tag for next request fails
Commit 113285b473824 ("blk-mq: ensure that bd->last is always set
correctly") will set last if we failed to get driver tag for next
request to avoid flush miss as we break the list walk and will not
send the last request in the list which will be sent with last set
normally.
This code seems stale now becase the flush introduced is always
redundant as:
For case tag is really out, we will send a extra flush if we find
list is not empty after list walk.
For case some tag is freed before retry in blk_mq_prep_dispatch_rq for
next, then we can get a tag for next request in retry and flush notified
already is not necessary.
Just remove these stale codes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:23 +0000 (17:37 +0800)]
blk-mq: remove unnecessary error count and check in blk_mq_dispatch_rq_list
blk_mq_dispatch_rq_list will notify if hctx is busy in return bool. It will
return true if we are not busy and can handle more and return false on the
opposite. Inside blk_mq_dispatch_rq_list, errors is only used if list is
empty and we will return true if list is empty and (errors + queued) != 0.
There are three types of status returned from request:
-busy error BLK_STS*_RESOURCE: the failed request will be added back
to list and list will not be empty.
-BLK_STS_OK: We count queued for BLK_STS_OK
-rest error: We count errors for rest error
If list is empty, there is no request gets busy error then (errors +
queued) will be total requests in the list which is checked not empty at
beginning of blk_mq_dispatch_rq_list. So (errors + queued) != 0 is always
met if list is empty. Then the (errors + queued) != 0 check and errors
number count is not needed.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:22 +0000 (17:37 +0800)]
blk-mq: simplify flush check in blk_mq_dispatch_rq_list
1. Remove check of needs_resource and ret == BLK_STS_DEV_RESOURCE.
For busy error BLK_STS*_RESOURCE, request will always be added
back to list, so need_resource will not be true and ret will
not be == BLK_STS_DEV_RESOURCE if list is empty. We could remove
these dead check.
2. Check ret of last request instead of errors
If list is empty, we only need to explicitly commit_rqs
if error happens at last request which is stored in ret. So check
ret of last request instead of errors to remove unnecessary
commit_rqs triggered by errors returned from previous request.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:21 +0000 (17:37 +0800)]
blk-mq: use blk_mq_commit_rqs helper in blk_mq_try_issue_list_directly
Call blk_mq_commit_rqs instead of access ->commit_rqs directly. As you
can see in comment of blk_mq_commit_rqs, we only need explicitly call
this in two cases:
-did not queue everything initially scheduled to queue
-the last attempt to queue a request failed
Both cases can be checked with ret of last request which breaks list
walk. Then we can remove unnecessary error count and unnecessary
commit triggered by error besides cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:20 +0000 (17:37 +0800)]
blk-mq: remove unncessary error count and commit in blk_mq_plug_issue_direct
We need only to explicitly commit in two error cases:
-did not queue everything initially scheduled to queue
-the last attempt to queue a request failed
(see comment of blk_mq_commit_rqs for more details).
Both cases can be checked with ret of last request which breaks list walk.
Remove unnecessary error count and unnecessary commit triggered by error
which is not covered by cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:19 +0000 (17:37 +0800)]
blk-mq: make blk_mq_commit_rqs a general function for all commits
1. move blk_mq_commit_rqs forward before functions need commits.
2. add queued check and only commits request if any request was queued
in blk_mq_commit_rqs to keep commit behavior consistent and remove
unnecessary commit.
3. split the queued clearing from blk_mq_plug_commit_rqs as it is
not wanted general.
4. sync current caller of blk_mq_commit_rqs with new general
blk_mq_commit_rqs.
5. document rule for unusual cases which need explicit commit_rqs.
Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:18 +0000 (17:37 +0800)]
blk-mq: remove unncessary from_schedule parameter in blk_mq_plug_issue_direct
Function blk_mq_plug_issue_direct tries to issue batch requests in plug
list to driver directly. We will only issue plug request to driver if we
are not from scheduler, so from_scheduler parameter of
blk_mq_plug_issue_direct is always false.
Remove unncessary from_scheduler of blk_mq_plug_issue_direct.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:17 +0000 (17:37 +0800)]
blk-mq: remove unnecessary list_empty check in blk_mq_try_issue_list_directly
We only break the list walk if we get 'BLK_STS_*RESOURCE'. We also
count errors for 'BLK_STS_*RESOURCE' error. If list is not empty,
errors will always be non-zero. So we can remove unnecessary list_empty
check. This will remove redundant list_empty check for case that
error happened at sending last request in list.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:16 +0000 (17:37 +0800)]
blk-mq: Fix potential io hung for shared sbitmap per tagset
Commit f906a6a0f4268 ("blk-mq: improve tag waiting setup for non-shared
tags") mark restart for unshared tags for improvement. At that time,
tags is only shared betweens queues and we can check if tags is shared
by test BLK_MQ_F_TAG_SHARED.
Afterwards, commit 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per
tagset") enabled tags share betweens hctxs inside a queue. We only
mark restart for shared hctxs inside a queue and may cause io hung if
there is no tag currently allocated by hctxs going to be marked restart.
Wait on sbitmap_queue instead of mark restart for shared hctxs case to
fix this.
Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:15 +0000 (17:37 +0800)]
blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
For shared queues case, we will only wait on bitmap_tags if we fail to get
driver tag. However, rq could be from breserved_tags, then two problems
will occur:
1. io hung if no tag is currently allocated from bitmap_tags.
2. unnecessary wakeup when tag is freed to bitmap_tags while no tag is
freed to breserved_tags.
Wait on the bitmap which rq from to fix this.
Fixes: f906a6a0f426 ("blk-mq: improve tag waiting setup for non-shared tags") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:14 +0000 (17:37 +0800)]
blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
Commit 97889f9ac24f8 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kemeng Shi [Wed, 18 Jan 2023 09:37:13 +0000 (17:37 +0800)]
blk-mq: avoid sleep in blk_mq_alloc_request_hctx
Commit 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0cea784 ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes: 600c3b0cea78 ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: stub out and deprecated the capability attribute on the gendisk
The capability attribute was added in 2017 to expose the kernel internal
GENHD_FL_MEDIA_CHANGE_NOTIFY to userspace without ever adding a value to
an UAPI header, and without ever setting it in any driver until it was
finally removed in Linux 5.7.
Deprecate the file and always return 0 instead of exposing the other
internal and frequently renumbered other gendisk flags.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230203150209.3199115-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
virtio_blk: use bvec_set_virt to initialize special_vec
Use the bvec_set_virt helper to initialize the special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230203150634.3199647-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
A smaller wrapper around bvec_set_page that takes a folio instead.
There are only two potential users for this in the tree, but the number
will grow in the future.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230203150634.3199647-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-cgroup: move the cgroup information to struct gendisk
cgroup information only makes sense on a live gendisk that allows
file system I/O (which includes the raw block device). So move over
the cgroup related members.
blk-wbt: open code wbt_queue_depth_changed in wbt_init
wbt_queue_depth_changed just updates a field and calls another function.
Open code it in wbt_init, so that the local queue variable can be used
instead of the one stored in the rq_qos. This will allow delaying that
rq_qos->queue assignment in a subsequent patch.
Currently each blkcg_gq holds a request_queue reference, which is what
is used in the policies. But a lot of these interfaces will move over to
use a gendisk, so store a disk in struct blkcg_gq and hold a reference to
it.
Unwind only the previous initialization steps that happened in blkg_alloc
using goto based unwinding. This avoids the need for the !queue special
case in blkg_free and thus ensures that any blkg seens outside of
blkg_alloc is always fully constructed.
blk-cgroup: delay blk-cgroup initialization until add_disk
There is no need to initialize the cgroup code before the disk is marked
live. Moving the cgroup initialization earlier will help to have a
fully initialized struct device in the gendisk for the cgroup code to
use in the future. Similarly tear the cgroup information down in
del_gendisk to be symmetric and because none of the cgroup tracking is
needed once non-passthrough I/O stops.
block: don't call blk_throtl_stat_add for non-READ/WRITE commands
blk_throtl_stat_add is called from blk_stat_add explicitly, unlike the
other stats that go through q->stats->callbacks. To prepare for cgroup
data moving to the gendisk, ensure blk_throtl_stat_add is only called
for the plain READ and WRITE commands that it actually handles internally,
as blk_stat_add can also be called for passthrough commands on queues that
do not have a gendisk associated with them.
Jens Axboe [Thu, 2 Feb 2023 23:04:54 +0000 (16:04 -0700)]
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.3/block
Pull MD updates from Song:
"Non-urgent fixes:
md: don't update recovery_cp when curr_resync is ACTIVE
md: Free writes_pending in md_stop
Performance optimization:
md: Change active_io to percpu"
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: use MD_RESYNC_* whenever possible
md: Free writes_pending in md_stop
md: Change active_io to percpu
md: Factor out is_md_suspended helper
md: don't update recovery_cp when curr_resync is ACTIVE
Xiao Ni [Tue, 31 Jan 2023 05:17:10 +0000 (13:17 +0800)]
md: Change active_io to percpu
Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.
After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.
Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org>
Hou Tao [Tue, 31 Jan 2023 07:07:19 +0000 (15:07 +0800)]
md: don't update recovery_cp when curr_resync is ACTIVE
Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:
// e.g., set array as idle
set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
// resync loop
// check INTR before calling sync_request
!test_bit(MD_RECOVERY_INTR, &mddev->recovery
// resync interrupted
// update recovery_cp from 0 to 3
// the resync of three 3 sectors will be skipped
mddev->recovery_cp = 3
Fixes: eac58d08d493 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync") Cc: stable@vger.kernel.org # 6.0+ Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
Bart Van Assche [Mon, 30 Jan 2023 21:13:47 +0000 (13:13 -0800)]
loop: Improve the hw_queue_depth kernel module parameter implementation
Make the following minor changes which were reported by colleagues
while reviewing this code:
- Remove the parentheses from around the LOOP_DEFAULT_HW_Q_DEPTH
definition since these are superfluous.
- Accept other number formats than decimal, e.g. hexadecimal.
- Do not set hw_queue_depth to an out-of-range value, even if that value
won't be used.
- Use the LOOP_DEFAULT_HW_Q_DEPTH macro in the kernel module parameter
description to prevent that the description gets out of sync.
This patch has been tested as follows:
# modprobe -r loop
# modprobe loop hw_queue_depth=-1
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=0
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=1; cat /sys/module/loop/parameters/hw_queue_depth
1
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=0x10
16
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=128
128
# modprobe -r loop; modprobe loop hw_queue_depth=129; cat /sys/module/loop/parameters/hw_queue_depth
129
# modprobe -r loop; modprobe loop hw_queue_depth=$((1<<32))
modprobe: ERROR: could not insert 'loop': Numerical result out of range
See also commit ef44c50837ab ("loop: allow user to set the queue
depth").
Keith Busch [Fri, 27 Jan 2023 16:56:20 +0000 (08:56 -0800)]
nvme: mask CSE effects for security receive
The nvme driver will freeze the IO queues in response to an admin
command with CSE bits set. These bits notify the host that the command
that's about to be executed needs to be done exclusively, hence the
freeze.
The Security Receive command is often reported by multiple vendors with
CSE bits set. The reason for this is that the result depends on the
previous Security Send. This has nothing to do with IO queues, though,
so the driver is taking an overly cautious response to seeing this
passthrough command, while unable to fufill the intended admin queue
action.
Rather than freeze IO during this harmless command, mask off the
effects. This freezing is observed to cause IO latency spikes when host
software periodically validates the security state of the drives.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Thu, 5 Jan 2023 20:28:32 +0000 (12:28 -0800)]
nvme-pci: place descriptor addresses in iod
The 'struct nvme_iod' space is appended at the end of the preallocated
'struct request', and padded to the cache line size. This leaves some
free memory (in most kernel configs) up for grabs.
Instead of appending the nvme data descriptor addresses after the
scatterlist, inline these for free within struct nvme_iod. There is now
enough space in the mempool for 128 possibe segments.
And without increasing the size of the preallocated requests, we can
hold up to 5 PRP descriptor elements, allowing the driver to increase
its max transfer size to 8MB.
Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Thu, 5 Jan 2023 20:28:31 +0000 (12:28 -0800)]
nvme-pci: use mapped entries for sgl decision
The driver uses the dma entries for setting up its command's SGL/PRP
lists. The dma mapping might have fewer entries than the physical
segments, so check the dma mapped count to determine which nvme data
layout method is more optimal.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Thu, 5 Jan 2023 20:28:30 +0000 (12:28 -0800)]
nvme-pci: remove SGL segment descriptors
The max segments this driver can see is 127, well below the 256
threshold needed to add an nvme sgl segment descriptor. Remove all the
useless checks and dead code.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
projects / thirdparty / linux.git / log
