builtin/config: move display options into local variables
The display options are tracked via a set of global variables. Move
them into a self-contained structure so that we can easily parse all
relevant options and hand them over to the various functions that
require them.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: move location options into local variables
The location options are tracked via a set of global variables. Move
them into a self-contained structure so that we can easily parse all
relevant options and hand them over to the various functions that
require them.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: check for writeability after source is set up
The `check_write()` function verifies that we do not try to write to a
config source that cannot be written to, like for example stdin. But
while the new subcommands do call this function, they do so before
calling `handle_config_location()`. Consequently, we only end up
checking the default config location for writeability, not the location
that was actually specified by the caller of git-config(1).
Fix this by calling `check_write()` after `handle_config_location()`. We
will further clarify the relationship between those two functions in a
subsequent commit where we remove the global state that both implicitly
rely on.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: move actions into `cmd_config_actions()`
We only use actions in the legacy mode. Convert them to an enum and move
them into `cmd_config_actions()` to clearly demonstrate that they are
not used anywhere else.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: move legacy mode into its own function
In `cmd_config()` we first try to parse the provided arguments as
subcommands and, if this is successful, call the respective functions
of that subcommand. Otherwise we continue with the "legacy" mode that
uses implicit actions and/or flags.
Disentangle this by moving the legacy mode into its own function. This
allows us to move the options into the respective functions and clearly
separates concerns.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: stop printing full usage on misuse
When invoking git-config(1) with a wrong set of arguments we end up
calling `usage_builtin_config()` after printing an error message that
says what was wrong. As that function ends up printing the full list of
options, which is quite long, the actual error message will be buried by
a wall of text. This makes it really hard to figure out what exactly
caused the error.
Furthermore, now that we have recently introduced subcommands, the usage
information may actually be misleading as we unconditionally print
options of the subcommand-less mode.
Fix both of these issues by just not printing the options at all
anymore. Instead, we call `usage()` that makes us report in a single
line what has gone wrong. This should be way more discoverable for our
users and addresses the inconsistency.
Furthermore, this change allow us to inline the options into the
respective functions that use them to parse the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 May 2024 17:18:47 +0000 (10:18 -0700)]
Merge branch 'bb/rgb-12-bit-colors'
The color parsing code learned to handle 12-bit RGB colors, spelled
as "#RGB" (in addition to "#RRGGBB" that is already supported).
* bb/rgb-12-bit-colors:
color: add support for 12-bit RGB colors
t/t4026-color: add test coverage for invalid RGB colors
t/t4026-color: remove an extra double quote character
Junio C Hamano [Wed, 8 May 2024 17:18:46 +0000 (10:18 -0700)]
Merge branch 'bc/zsh-compatibility'
zsh can pretend to be a normal shell pretty well except for some
glitches that we tickle in some of our scripts. Work them around
so that "vimdiff" and our test suite works well enough with it.
* bc/zsh-compatibility:
vimdiff: make script and tests work with zsh
t4046: avoid continue in &&-chain for zsh
Junio C Hamano [Wed, 8 May 2024 17:18:45 +0000 (10:18 -0700)]
Merge branch 'rj/add-p-typo-reaction'
When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* rj/add-p-typo-reaction:
add-patch: response to unknown command
add-patch: do not show UI messages on stderr
Junio C Hamano [Wed, 8 May 2024 17:18:45 +0000 (10:18 -0700)]
Merge branch 'rh/complete-symbolic-ref'
Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* rh/complete-symbolic-ref:
completion: add docs on how to add subcommand completions
completion: improve docs for using __git_complete
completion: add 'symbolic-ref'
Junio C Hamano [Wed, 8 May 2024 17:18:44 +0000 (10:18 -0700)]
Merge branch 'ps/the-index-is-no-more'
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
Junio C Hamano [Wed, 8 May 2024 17:18:44 +0000 (10:18 -0700)]
Merge branch 'bc/credential-scheme-enhancement'
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Junio C Hamano [Wed, 8 May 2024 17:18:44 +0000 (10:18 -0700)]
Merge branch 'ps/ci-test-with-jgit'
Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* ps/ci-test-with-jgit:
t0612: add tests to exercise Git/JGit reftable compatibility
t0610: fix non-portable variable assignment
t06xx: always execute backend-specific tests
ci: install JGit dependency
ci: make Perforce binaries executable for all users
ci: merge scripts which install dependencies
ci: fix setup of custom path for GitLab CI
ci: merge custom PATH directories
ci: convert "install-dependencies.sh" to use "/bin/sh"
ci: drop duplicate package installation for "linux-gcc-default"
ci: skip sudo when we are already root
ci: expose distro name in dockerized GitHub jobs
ci: rename "runs_on_pool" to "distro"
Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: pull out function to handle config location
There's quite a bunch of options to git-config(1) that allow the user to
specify which config location to use when reading or writing config
options. The logic to handle this is thus by necessity also quite
involved.
Pull it out into a separate function so that we can reuse it in
subsequent commits which introduce proper subcommands.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: use `OPT_CMDMODE()` to specify modes
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: move "fixed-value" option to correct group
The `--fixed-value` option can be used to alter how the value-pattern
parameter is interpreted for the various actions of git-config(1). But
while it is an option, it is currently listed as part of the actions
group, which is wrong.
Move the option to the "Other" group, which hosts the various options
known to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: clarify memory ownership when preparing comment strings
The ownership of memory returned when preparing a comment string is
quite intricate: when the returned value is different than the passed
value, then the caller is responsible to free the memory. This is quite
subtle, and it's even easier to miss because the returned value is in
fact a `const char *`.
Adapt the function to always return either `NULL` or a newly allocated
string. The function is called at most once per git-config(1), so it's
not like this micro-optimization really matters. Thus, callers are now
always responsible for freeing the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Beat Bolli [Thu, 2 May 2024 11:03:31 +0000 (13:03 +0200)]
color: add support for 12-bit RGB colors
RGB color parsing currently supports 24-bit values in the form #RRGGBB.
As in Cascading Style Sheets (CSS [1]), also allow to specify an RGB color
using only three digits with #RGB.
In this shortened form, each of the digits is – again, as in CSS –
duplicated to convert the color to 24 bits, e.g. #f1b specifies the same
color as #ff11bb.
In color.h, remove the '0x' prefix in the example to match the actual
syntax.
René Scharfe [Wed, 1 May 2024 10:26:16 +0000 (12:26 +0200)]
diff-lib: stop calling diff_setup_done() in do_diff_cache()
d44e5267ea (diff-lib: plug minor memory leaks in do_diff_cache(),
2020-11-14) added the call to diff_setup_done() to release the memory
of the parseopt member of struct diff_options that repo_init_revisions()
had allocated via repo_diff_setup() and prep_parse_options().
189e97bc4b (diff: remove parseopts member from struct diff_options,
2022-12-01) did away with that allocation; diff_setup_done() doesn't
release any memory anymore. So stop calling this function on the blank
diffopt member before it is overwritten, as this is no longer necessary.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
D. Ben Knoble [Tue, 30 Apr 2024 21:53:15 +0000 (21:53 +0000)]
completion: zsh: stop leaking local cache variable
Completing commands like "git rebase" in one repository will leak the
local __git_repo_path into the shell's environment so that completing
commands after changing to a different repository will give the old
repository's references (or none at all).
The bug report on the mailing list [1] suggests one simple way to observe
this yourself:
Enter the following commands from some directory:
mkdir a b b/c
for d (a b); git -C $d init && git -C $d commit --allow-empty -m init
cd a
git branch foo
pushd ../b/c
git branch bar
Now type these:
git rebase <TAB>… # completion for bar available; C-c to abort
declare -p __git_repo_path # outputs /path/to/b/.git
popd
git branch # outputs foo, main
git rebase <TAB>… # completion candidates are bar, main!
Ideally, the last typed <TAB> should be yielding foo, main.
Commit beb6ee7163 (completion: extract repository discovery from
__gitdir(), 2017-02-03) anticipated this problem by marking
__git_repo_path as local in __git_main and __gitk_main for Bash
completion but did not give the same mark to _git for Zsh completion.
Thus make __git_repo_path local for Zsh completion, too.
Junio C Hamano [Tue, 30 Apr 2024 21:49:45 +0000 (14:49 -0700)]
Merge branch 'js/for-each-repo-keep-going'
A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* js/for-each-repo-keep-going:
maintenance: running maintenance should not stop on errors
for-each-repo: optionally keep going on an error
Junio C Hamano [Tue, 30 Apr 2024 21:49:44 +0000 (14:49 -0700)]
Merge branch 'js/build-fuzz-more-often'
In addition to building the objects needed, try to link the objects
that are used in fuzzer tests, to make sure at least they build
without bitrot, in Linux CI runs.
* js/build-fuzz-more-often:
fuzz: link fuzz programs with `make all` on Linux
Junio C Hamano [Tue, 30 Apr 2024 21:49:42 +0000 (14:49 -0700)]
Merge branch 'jc/format-patch-rfc-more'
The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* jc/format-patch-rfc-more:
format-patch: "--rfc=-(WIP)" appends to produce [PATCH (WIP)]
format-patch: allow --rfc to optionally take a value, like --rfc=WIP
Junio C Hamano [Tue, 30 Apr 2024 21:49:42 +0000 (14:49 -0700)]
Merge branch 'ds/format-patch-rfc-and-k'
The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* ds/format-patch-rfc-and-k:
format-patch: ensure that --rfc and -k are mutually exclusive
Junio C Hamano [Tue, 30 Apr 2024 21:49:41 +0000 (14:49 -0700)]
Merge branch 'pw/rebase-m-signoff-fix'
"git rebase --signoff" used to forget that it needs to add a
sign-off to the resulting commit when told to continue after a
conflict stops its operation.
* pw/rebase-m-signoff-fix:
rebase -m: fix --signoff with conflicts
sequencer: store commit message in private context
sequencer: move current fixups to private context
sequencer: start removing private fields from public API
sequencer: always free "struct replay_opts"
When the user gives an unknown command to the "add -p" prompt, the list
of accepted commands with their explanation is given. This is the same
output they get when they say '?'.
However, the unknown command may be due to a user input error rather
than the user not knowing the valid command.
To reduce the likelihood of user confusion and error repetition, instead
of displaying the list of accepted commands, display a short error
message with the unknown command received, as feedback to the user.
Include a reminder about the current command '?' in the new message, to
guide the user if they want help.
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to show some UI messages on stderr, and yet doing so
may produce some undesirable results, such as messages appearing in an
unexpected order.
Let's use stdout for all UI messages, and adjusts the tests accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Fri, 26 Apr 2024 22:11:54 +0000 (22:11 +0000)]
vimdiff: make script and tests work with zsh
When we process the $LAYOUT variable through sed, the result will end
with the character "#". We then split it at the shell using IFS so that
we can process it a character at a time.
POSIX specifies that only "IFS white space shall be ignored at the
beginning and end of the input". The hash mark is not a white space
character, so it is not ignored at the beginning and end of the input.
POSIX then specifies that "[e]ach occurrence in the input of an IFS
character that is not IFS white space, along with any adjacent IFS white
space, shall delimit a field, as described previously." Thus, the final
hash mark delimits a field, and the final field is the empty string.
zsh implements this behavior strictly in compliance with POSIX (and
differently from most other shells), such that we end up with a trailing
empty field. We don't want this empty field and processing it in the
normal way causes us to fail to parse properly and fail the tests with
"ERROR" entries, so let's just ignore it instead. This is the behavior
of bash and dash anyway and what was clearly intended, so this is a
reasonable thing to do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Fri, 26 Apr 2024 22:11:53 +0000 (22:11 +0000)]
t4046: avoid continue in &&-chain for zsh
zsh has a bug in which the keyword "continue" within an &&-chain is not
effective and the code following it is executed nonetheless.
Fortunately, this bug has been fixed upstream in 12e5db145 ("51608:
Don't execute commands after "continue &&"", 2023-03-29). However, zsh
releases very infrequently, so it is not present in a stable release
yet.
That, combined with the fact that almost all zsh users get their shell
from their OS vendor, means that it will likely be a long time before
this problem is fixed for most users. We have other workarounds in
place for FreeBSD ash and dash, so it shouldn't be too difficult to add
one here, either.
Replace the existing code with a test and if-block, which comes only at
the cost of an additional indentation, and leaves the code a little more
idiomatic anyway.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: clarify practices for submitting updated patch versions
The `SubmittingPatches` documentation briefly mentions that related
patches should be grouped together in their own e-mail thread. Expand on
this to explicitly state that updated versions of a patch series should
also follow this. Also provide add a link to existing documentation from
`MyFirstContribution` that provides detailed instructions on how to do
this via `git-send-email(1)`.
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 25 Apr 2024 17:34:24 +0000 (10:34 -0700)]
Merge branch 'rj/add-i-leak-fix'
Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
Roland Hieber [Thu, 25 Apr 2024 10:18:43 +0000 (12:18 +0200)]
completion: improve docs for using __git_complete
It took me more than a few tries and a good lecture of __git_main to
understand that the two paragraphs really only refer to adding
completion functions for executables that are not called through git's
subcommand magic. Improve the docs and be more specific.
Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Roland Hieber [Thu, 25 Apr 2024 10:18:42 +0000 (12:18 +0200)]
completion: add 'symbolic-ref'
Even 'symbolic-ref' is only completed when
GIT_COMPLETION_SHOW_ALL_COMMANDS=1 is set, it currently defaults to
completing file names, which is not very helpful. Add a simple
completion function which completes options and refs.
Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e47215080 (fuzz: add basic fuzz testing target., 2018-10-12), we
have compiled object files for the fuzz tests as part of the default
'make all' target. This helps prevent bit-rot in lesser-used parts of
the codebase, by making sure that incompatible changes are caught at
build time.
However, since we never linked the fuzzer executables, this did not
protect us from link-time errors. As of 8b9a42bf48 (fuzz: fix fuzz test
build rules, 2024-01-19), it's now possible to link the fuzzer
executables without using a fuzzing engine and a variety of
compiler-specific (and compiler-version-specific) flags, at least on
Linux. So let's add a platform-specific option in config.mak.uname to
link the executables as part of the default `make all` target.
Since linking the fuzzer executables without a fuzzing engine does not
require a C++ compiler, we can change the FUZZ_PROGRAMS build rule to
use $(CC) by default. This avoids compiler mis-match issues when
overriding $(CC) but not $(CXX). When we *do* want to actually link with
a fuzzing engine, we can set $(FUZZ_CXX). The build instructions in the
CI fuzz-smoke-test job and in the Makefile comment have been updated
accordingly.
While we're at it, we can consolidate some of the fuzzer build
instructions into one location in the Makefile.
Suggested-by: Junio C Hamano <gitster@pobox.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
maintenance: running maintenance should not stop on errors
In https://github.com/microsoft/git/issues/623, it was reported that
maintenance stops on a missing repository, omitting the remaining
repositories that were scheduled for maintenance.
This is undesirable, as it should be a best effort type of operation.
It should still fail due to the missing repository, of course, but not
leave the non-missing repositories in unmaintained shapes.
Let's use `for-each-repo`'s shiny new `--keep-going` option that we just
introduced for that very purpose.
This change will be picked up when running `git maintenance start`,
which is run implicitly by `scalar reconfigure`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/microsoft/git/issues/623, it was reported that
the regularly scheduled maintenance stops if one repo in the middle of
the list was found to be missing.
This is undesirable, and points out a gap in the design of `git
for-each-repo`: We need a mode where that command does not stop on an
error, but continues to try running the specified command with the other
repositories.
Imitating the `--keep-going` option of GNU make, this commit teaches
`for-each-repo` the same trick: to continue with the operation on all
the remaining repositories in case there was a problem with one
repository, still setting the exit code to indicate an error occurred.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "receive-pack" program (which responds to "git push") was not
converted to run "git maintenance --auto" when other codepaths that
used to run "git gc --auto" were updated, which has been corrected.
* ps/run-auto-maintenance-in-receive-pack:
builtin/receive-pack: convert to use git-maintenance(1)
run-command: introduce function to prepare auto-maintenance process
Junio C Hamano [Tue, 23 Apr 2024 22:05:56 +0000 (15:05 -0700)]
Merge branch 'pk/bisect-use-show'
When "git bisect" reports the commit it determined to be the
culprit, we used to show it in a format that does not honor common
UI tweaks, like log.date and log.decorate. The code has been
taught to use "git show" to follow more customizations.
* pk/bisect-use-show:
bisect: report the found commit with "show"
Junio C Hamano [Tue, 23 Apr 2024 18:52:41 +0000 (11:52 -0700)]
Merge branch 'mr/rerere-crash-fix'
When .git/rr-cache/ rerere database gets corrupted or rerere is fed to
work on a file with conflicted hunks resolved incompletely, the rerere
machinery got confused and segfaulted, which has been corrected.
* mr/rerere-crash-fix:
rerere: fix crashes due to unmatched opening conflict markers
Junio C Hamano [Tue, 23 Apr 2024 18:52:40 +0000 (11:52 -0700)]
Merge branch 'ps/missing-btmp-fix'
GIt 2.44 introduced a regression that makes the updated code to
barf in repositories with multi-pack index written by older
versions of Git, which has been corrected.
Junio C Hamano [Tue, 23 Apr 2024 18:52:39 +0000 (11:52 -0700)]
Merge branch 'dd/t9604-use-posix-timezones'
The cvsimport tests required that the platform understands
traditional timezone notations like CST6CDT, which has been
updated to work on those systems as long as they understand
POSIX notation with explicit tz transition dates.
* dd/t9604-use-posix-timezones:
t9604: Fix test for musl libc and new Debian
Junio C Hamano [Tue, 23 Apr 2024 18:52:39 +0000 (11:52 -0700)]
Merge branch 'rj/launch-editor-error-message'
Git writes a "waiting for your editor" message on an incomplete
line after launching an editor, and then append another error
message on the same line if the editor errors out. It now clears
the "waiting for..." line before giving the error message.
* rj/launch-editor-error-message:
launch_editor: waiting message on error
projects / thirdparty / git.git / log
