Samuel Thibault [Sat, 6 May 2023 14:46:56 +0000 (16:46 +0200)]
Add hurd-x86_64 support
This also upgrades flags similarly to the Linux configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20896)
Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21587)
ihciah [Thu, 11 May 2023 09:30:14 +0000 (09:30 +0000)]
bio: pass flags on BIO_ctrl to make flush retriable
Co-authored-by: suikammd <suikalala@gmail.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21298)
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21590)
Rohan McLure [Wed, 31 May 2023 04:32:26 +0000 (14:32 +1000)]
ec: powerpc64le: Add asm implementation of felem_{square,mul}
Add an assembly implementation of felem_{square,mul}, which will be
implemented whenever Altivec support is present and the core implements
ISA 3.0 (Power 9) or greater.
Signed-off-by: Rohan McLure <rohanmclure@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21471)
Adopt a 56-bit redundant-limb Solinas' reduction approach for efficient
modular multiplication in P384. This has the affect of accelerating
digital signing by 446% and verification by 106%. The implementation
strategy and names of methods are the same as that provided in
ecp_nistp224 and ecp_nistp521.
As in Commit 1036749883cc ("ec: Add run time code selection for p521
field operations"), allow for run time selection of implementation for
felem_{square,mul}, where an assembly implementation is proclaimed to
be present when ECP_NISTP384_ASM is present.
Signed-off-by: Rohan McLure <rohanmclure@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21471)
Rohan McLure [Fri, 23 Jun 2023 06:41:48 +0000 (16:41 +1000)]
ec: Use static linkage on nistp521 felem_{square,mul} wrappers
Runtime selection of implementations for felem_{square,mul} depends on
felem_{square,mul}_wrapper functions, which overwrite function points in
a similar design to that of .plt.got sections used by program loaders
during dynamic linking.
There's no reason why these functions need to have external linkage.
Mark static.
Signed-off-by: Rohan McLure <rohanmclure@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21471)
Tomas Mraz [Fri, 21 Jul 2023 15:45:32 +0000 (17:45 +0200)]
endecode_test.c: Add tests for decoding with 0 selection
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21519)
Tomas Mraz [Fri, 21 Jul 2023 15:40:31 +0000 (17:40 +0200)]
When exporting/importing decoded keys do not use 0 as selection
When decoding 0 as the selection means to decode anything
you get.
However when exporting and then importing the key data 0 as
selection is not meaningful.
So we set it to OSSL_KEYMGMT_SELECT_ALL to make the export/import
function export/import everything that we have decoded.
Fixes #21493
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21519)
Tomas Mraz [Fri, 21 Jul 2023 14:26:12 +0000 (16:26 +0200)]
Avoid exporting bogus (empty) data if empty selection is used
This is already correct in the rsa_kmgmt.c but other
implementations are wrong.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21519)
Resolves some magic values that has a hello_retry_request enum type.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21636)
crypto/cmp: fix clash of OSSL_CMP_CERTREQID_NONE with error result of ossl_cmp_asn1_get_int()
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21579)
Wo'O Ideafarm [Tue, 1 Aug 2023 17:47:16 +0000 (10:47 -0700)]
formatting: shift one space to right
per request.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21595)
Code that includes applink.c can now define APPLINK_NO_INCLUDES to suppress the include preprocessor lines in that file. This might be needed if, for example, applink.c is being included into a source file that will be compiled to reference a C library built using different calling conventions. (Example: Open Watcom.)
This pull request is intended to replace an identical pull request that I screwed up.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21595)
Tianjia Zhang [Tue, 1 Aug 2023 06:21:02 +0000 (14:21 +0800)]
Fix typo in function name
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21608)
Matt Caswell [Fri, 28 Jul 2023 14:32:57 +0000 (15:32 +0100)]
Extend the test_quic_write_read() test to include resumption
We add an additional loop around test_quic_write_read() to repeat the
test but using a session obtained from the initial iteration to confirm
that we can successfully resume the session.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
Matt Caswell [Fri, 28 Jul 2023 15:04:14 +0000 (16:04 +0100)]
Ensure the QUIC TLS SSL object is marked as shutdown
If we shutdown the QUIC connection then we should mark the underlying
TLS SSL object as shutdown as well. Otherwise any sessions are considered
unusable for resumption.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
Matt Caswell [Thu, 27 Jul 2023 12:48:02 +0000 (13:48 +0100)]
Keep doing ossl_quic_tls_tick() even after handshake completion
There may be post-handshake messages to process so make sure we keep
ticking things even if the handshake has finished. We do this simply by
calling SSL_read(). There should never be app data to read but we will
process any handshake records we encounter.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
Matt Caswell [Thu, 27 Jul 2023 14:30:17 +0000 (15:30 +0100)]
Ensure SSL_has_pending() always works even before a connection
s_client calls SSL_has_pending() even before the connection has been
established. We expect it to return 0 in this case and not put any errors
on the stack.
We change things so that SSL_has_pending() always returns 0 if there is
no stream available.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21578)
Matt Caswell [Mon, 31 Jul 2023 11:32:16 +0000 (12:32 +0100)]
The PEM_read_bio_Parameters() function should not ask for a password
The PEM_read_bio_Parameters[_ex] function does not have the capability
of specifying a password callback. We should not use the fallback password
callback in this case because it will attempt to send a prompt for the
password which might not be the correct thing to do. We should just not
use a password in that case.
Fixes #21588
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21603)
Matt Caswell [Mon, 31 Jul 2023 11:30:34 +0000 (12:30 +0100)]
Always add a suitable error if we fail to decode
We're always supposed to add the fallback "unsupported" error if we don't
have anything better. However in some cases this wasn't happening because
we were incorrectly setting "flag_construct_called" - even though the
construct function had failed.
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21603)
In the definition of the latest revised LoongArch64 vector instruction manual,
it is clearly pointed out that the undefined upper three bits of each byte in
the control register of the vshuf.b instruction should not be used, otherwise
uncertain results may be obtained. Therefore, it is necessary to correct the
use of the vshuf.b instruction in the existing vpaes-loongarch64.pl code to
avoid erroneous calculation results in future LoongArch64 processors.
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21530)
speed: Unify output messages regarding number of ops per time
Always report "<algo> ops in <time>", instead of "<algo>'s in <time>" or
similar. Avoid the use of apostrophes and/or plural with algorithm names.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21383)
Ingo Franzki [Tue, 20 Jun 2023 11:40:41 +0000 (13:40 +0200)]
speed: Also measure RSA encrypt/decrypt, not only RSA sign/verify
While RSA encrypt/decrypt and sign/verify are basically the same mod-expo
operations, the speed of the operation may still differ, due to different
padding, as well as the use of implicit rejection for RSA decrypt.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21383)
Matt Caswell [Thu, 27 Jul 2023 11:09:47 +0000 (12:09 +0100)]
Fix a regression in X509_VERIFY_PARAM_add0_policy()
Also fixes a similar regression in X509_VERIFY_PARAM_add0_table().
Commit 38ebfc3 introduced a regression in 3.0.6 that changed the return
value of the two functions above from 1 on success to the number of entries
in the stack. If there are more than one entry then this is a change in
behaviour which should not have been introduced into a stable release.
This reverts the behaviour back to what it was prior to the change. The code
is slightly different to the original code in that we also handle a possible
-1 return value from the stack push function. This should never happen in
reality because we never pass a NULL stack as a parameter - but for the sake
of robustness we handle it anyway.
Note that the changed behaviour exists in all versions of 3.1 (it never had
the original version). But 3.1 should be fully backwards compatible with 3.0
so we should change it there too.
Fixes #21570
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21576)
Removes unused parameter 'sending' from derive_secret_key_and_iv()
Fixes #21569
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21569)
Xi Ruoyao [Fri, 21 Jul 2023 02:07:04 +0000 (02:07 +0000)]
vpaes: LoongArch: Use getauxval(AT_HWCAP) for LSX detection
Running LSX instructions requires both the hardware support and the
kernel support. The `cpucfg` instruction only tests the hardware
support, causing a SIGILL if the hardware supports LSX but the kernel
does not.
Use `getauxval(AT_HWCAP)` as the ["Software Development and Build
Convention for LoongArch Architectures"][1] manual suggests.
The LOONGARCH_HWCAP_LSX and LOONGARCH_HWCAP_LASX bits are copied from
the manual too. In Glibc 2.38 they'll be provided by <sys/auxv.h> as
well, but they are unavailable in earlier Glibc versions so we cannot
rely on it.
The getauxval syscall and Glibc wrapper are available since day one
(Linux-5.19 and Glibc-2.36) for LoongArch.
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21509)
John Kohl [Wed, 26 Jul 2023 12:41:31 +0000 (08:41 -0400)]
fix compile error (SIZE_MAX not found) on HP-UX
Fixes #21554
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21562)
x509/by_file.c: fix unreachable and redundant code
Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21545)
Reviewed-by: Hugo Landau <hlandau@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21535)
John Kohl [Wed, 26 Jul 2023 12:16:54 +0000 (08:16 -0400)]
Include <openssl/err.h> in include/refcount.h
Fixes #21555
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21561)
Tomas Mraz [Tue, 25 Jul 2023 13:35:34 +0000 (15:35 +0200)]
Add CHANGES.md and NEWS.md entries for CVE-2023-3817
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21550)
Tomas Mraz [Tue, 25 Jul 2023 13:23:43 +0000 (15:23 +0200)]
dhtest.c: Add test of DH_check() with q = p + 1
This must fail with DH_CHECK_INVALID_Q_VALUE and
with DH_CHECK_Q_NOT_PRIME unset.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21550)
Tomas Mraz [Tue, 25 Jul 2023 13:22:48 +0000 (15:22 +0200)]
DH_check(): Do not try checking q properties if it is obviously invalid
If |q| >= |p| then the q value is obviously wrong as q
is supposed to be a prime divisor of p-1.
We check if p is overly large so this added test implies that
q is not large either when performing subsequent tests using that
q value.
Otherwise if it is too large these additional checks of the q value
such as the primality test can then trigger DoS by doing overly long
computations.
Fixes CVE-2023-3817
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21550)
Make DH_check set some error bits in recently added error
The pre-existing error cases where DH_check returned zero
are not related to the dh params in any way, but are only
triggered by out-of-memory errors, therefore having *ret
set to zero feels right, but since the new error case is
triggered by too large p values that is something different.
On the other hand some callers of this function might not
be prepared to handle the return value correctly but only
rely on *ret. Therefore we set some error bits in *ret as
additional safety measure.
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21524)
get_cert_by_subject_ex(): Check result of X509_STORE_lock()
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21515)
MrRurikov [Thu, 29 Jun 2023 14:06:08 +0000 (17:06 +0300)]
bio_print.c: Delete unreachable code at lines 710 and 711
CLA: trivial
The purpose of adding the conditional operator on line 710 is to check
if the value of the variable 'fplace' exceeds the size of the array
'fconvert', and to reduce the value of 'fplace' by 1, so that later on
we can set the value to zero of the array element with the index 'fplace'
and not make any calls beyond the array edges.
However, the condition on line 710 will always be false, because
the size of 'fconvert' is strictly specified at the beginning of
the 'fmtfp()' function (line 571), so it is reasonable to remove
this conditional operator, as well as the unreachable decrementation
code of the variable 'fplace'.
Reviewed-by: Paul Dale <pauli@openssl.org> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21325)
Adds separate configuration targets for intel i386/x86_64 and arm64 ios simulators
Fixes #21287
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21309)
When an early error happens in the test_pipelining
function and idx == 5 the error handling would try
to call OPENSSL_free(msg), but msg is at that time
just a string constant in read-only memory, so a
crash would be the result. Fixed that by using
fragsize as an indication when to free msg.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com> Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21512)
projects / thirdparty / openssl.git / log
