Tom Tromey [Sun, 2 Oct 2016 16:50:20 +0000 (10:50 -0600)]
Convert observers to C++
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
Andreas Arnez [Mon, 19 Mar 2018 12:13:09 +0000 (13:13 +0100)]
Testsuite: Fix ambiguous "break" due to libinproctrace
Some of GDB's trace test cases define a function end() and place a
breakpoint there with "break end". However, when libinproctrace is linked
to the binary, there are multiple methods named "end", such as
std::string::end() from the C++ library or format_pieces::end() from
common/format.h. GDB then creates multiple breakpoints instead of just a
single one, and some FAILs result, such as these:
FAIL: gdb.trace/trace-mt.exp: ftrace on: break end
FAIL: gdb.trace/trace-mt.exp: ftrace off: break end
Fix this by adding the "-qualified" option to the break commands. For
consistency, change all occurrences of "break end" (and similar) in all
trace test cases, even if the current behavior does not cause problems.
Also, consequently use the gdb_breakpoint convenience proc.
Tom Tromey [Fri, 16 Mar 2018 23:02:11 +0000 (17:02 -0600)]
Change auto_load_objfile_script_1 to use std::string
This replaces some manual string manipulation in
auto_load_objfile_script_1 with std::string, simplifying the code and
allowing the removal of some cleanups.
Tested by the buildbot.
2018-03-17 Tom Tromey <tom@tromey.com>
* auto-load.c (auto_load_objfile_script_1): Use std::string.
Tom Tromey [Fri, 23 Feb 2018 21:42:26 +0000 (14:42 -0700)]
Remove target_fileio_close_cleanup
This removes target_fileio_close_cleanup in favor of a new RAII class.
The new class is similar to scoped_fd but calls
target_fileio_close_cleanup rather than close.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-17 Tom Tromey <tom@tromey.com>
* target.c (class scoped_target_fd): New.
(target_fileio_close_cleanup): Remove.
(target_fileio_read_alloc_1): Use scoped_target_fd.
Simon Marchi [Fri, 16 Mar 2018 20:06:23 +0000 (16:06 -0400)]
Add silent Makefile rules
Many projects (e.g. the Linux kernel) and build systems use "silent"
rules, which means that they'll only print a summary of what's being
done instead of printing all the detailed command lines. While chatting
on the #gdb IRC channel, I realized a few people (including me) thought
it would be nice to have it in GDB too.
The idea is that too much text is not useful, the important information
gets lost. If there's only the essential information, it's more likely
to be useful. Most of the time, when I look at the build output, it's
to see how it's progressing. By just printing a brief summary of each
operation, I can easily spot what's currently being compiled and
therefore how the build progresses (with time you know the order in
which files are compiled almost by heart).
As with other projects (Linux, automake-based things, probably others),
it's possible to print the complete command lines by passing V=1 to make
(or any other non-zero value).
I had one hesitation about this: when people report build failures, we
are more likely to miss the full compile command line. We'll probably
sometimes need to ask people to include the build log with "make V=1".
I don't think it's a big downside, if other projects the size of the
Linux kernel can live with it, I'm sure we can too.
Max Filippov [Thu, 15 Mar 2018 17:35:59 +0000 (10:35 -0700)]
xtensa: bfd: fix assertion in xlate_offset_with_removed_text
Linking objects containing jumps targeting the end of a section triggers
assertion in the xlate_offset_with_removed_text. Such jumps may be
generated by a compiler as a dead code and not removed at -O0. Allow
such jumps.
While at it make bsearch argument match comparison function expectations
and use bfd_vma for address fields in the struct xlate_map_entry.
bfd/
2018-03-15 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (xlate_map_entry): Change types of address
fields from 'unsigned' to 'bfd_vma'.
(xlate_offset_with_removed_text): Use struct xlate_map_entry as
the key argument to bsearch. Allow offsets past the end of a
section, use the last map entry for translation of such offsets.
Jim Wilson [Wed, 14 Mar 2018 23:04:03 +0000 (16:04 -0700)]
RISC-V: Add .insn support.
gas/ChangeLog
2018-03-07 Kito Cheng <kito.cheng@gmail.com>
* config/tc-riscv.c (opcode_name_list): New.
(opcode_names_hash): Likewise.
(init_opcode_names_hash): Likewise.
(opcode_name_lookup): Likewise.
(validate_riscv_insn): New argument length, and add new format
which used in .insn directive.
(md_begin): Refine hash table initialization logic into
init_opcode_hash.
(init_opcode_hash): New.
(my_getOpcodeExpression): Parse opcode name for .insn.
(riscv_ip): New argument hash, able to handle .insn directive.
(s_riscv_insn): Handler for .insn directive.
(riscv_pseudo_table): New entry for .insn.
* doc/c-riscv.texi: Add documentation for .insn directive.
* testsuite/gas/riscv/insn.d: Add testcase for .insn directive.
* testsuite/gas/riscv/insn.s: Likewise.
Tom Tromey [Thu, 15 Feb 2018 03:11:16 +0000 (20:11 -0700)]
Special case NULL when using printf's %s format
This changes the printf command's %s and %ls formats to special-case
NULL, and print "(null)" for these. This is PR cli/14977. This
behavior seems a bit friendlier; I was undecided on whether other
invalid pointers should be handled specially somehow, so for the time
being I've left those out.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* printcmd.c (printf_c_string, printf_wide_c_string): Special case
for NULL.
gdb/gdbserver/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* ax.c (ax_printf): Special case for NULL.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* gdb.base/printcmds.exp (test_printf): Add printf test of %s with
a null pointer.
* gdb.base/wchar.exp: Likewise.
Tom Tromey [Wed, 14 Feb 2018 18:12:17 +0000 (11:12 -0700)]
Allow - in %p for printf
PR cli/19918 points out that a printf format like "%-5p" will cause a
gdb crash. The bug is problem is that printf_pointer doesn't take the
"-" flag into account.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* printcmd.c (printf_pointer): Allow "-" in format.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* gdb.base/printcmds.exp (test_printf): Add printf test using '-'
flag.
to adjust from the original out-of-line save/restore function address
in sfpr to a copy at the end of stub_sec goes wrong when stub_sec is
padded, because the copy is no longer at the end of stub_sec. The
solution is to pad before copying sfpr, so the copy is always at the
end of stub_sec.
* elf64-ppc.c (sfpr_define): Adjust for stub_sec size having
sfpr size added before defining alias symbols.
(ppc64_elf_build_stubs): Add stub section padding before
copying sfpr contents and defining save/restore alias symbols.
Nick Clifton [Tue, 13 Mar 2018 16:10:45 +0000 (16:10 +0000)]
Add range changing to STABS parsing functions, in order to prevent buffer overruns.
PR 22955
* stabs.c (parse_number): Add p_end parameter and use it to check
the validity of the pp parameter. Add checks to prevent walking
off the end of the string buffer.
(parse_stab_string): Likewise.
(parse_stab_type): Likewise.
(parse_stab_type_number): Likewise.
(parse_stab_range_type): Likewise.
(parse_stab_sun_builtin_type): Likewise.
(parse_stab_sun_floating_type): Likewise.
(parse_stab_enum_type): Likewise.
(parse_stab_struct_type): Likewise.
(parse_stab_baseclasses): Likewise.
(parse_stab_struct_fields): Likewise.
(parse_stab_cpp_abbrev): Likewise.
(parse_stab_one_struct_field): Likewise.
(parse_stab_members): Likewise.
(parse_stab_tilde_field): Likewise.
(parse_stab_array_type): Likewise.
* parse_stab: Compute the end of the string and then pass it on to
individual parser functions.
bfd * pei-x86_64.c (pex64_get_unwind_info): Change to a boolean
function. Add an end address parameter. Check access of the data
pointer to make sure that they do not extend beyond the end
address. Return FALSE if any check fails. Add the end address
pointer to the ui structure.
(pex64_xdata_print_uwd_codes): Check accesses of the raw unwind
codes to make sure that they do not extend beyond the end address
pointer. Print an error message and return immediately if any
check fails.
* riscv-tdep.c (riscv_sw_breakpoint_from_kind): Add localization
to error message string.
(riscv_register_name): Use xsnprintf instead of sprintf.
(riscv_insn::fetch_instruction): Use gdb_assert instead of
internal_error.
(riscv_print_arg_location): Use gdb_assert_not_reached instead of
error.
(riscv_push_dummy_call): Likewise.
Yao Qi [Mon, 12 Mar 2018 09:15:39 +0000 (09:15 +0000)]
Fix ia64 GDB build
Commit 849d0ba8 breaks GDB build for ia64 with --with-libunwind-ia64=yes.
This patch fixes it.
gdb:
2018-03-12 Yao Qi <yao.qi@linaro.org>
* ia64-libunwind-tdep.c (libunwind_get_reg_special): Change
parameter type to readable_regcache.
* ia64-libunwind-tdep.h (libunwind_get_reg_special): Update
the declaration.
Tom Tromey [Sun, 11 Mar 2018 03:47:06 +0000 (20:47 -0700)]
Use std::vector for field lists in dwarf2read.c
This changes dwarf2read.c to use std::vector rather than a linked list
when managing the fields and base classes to be added to a type. This
removes some bookkeeping types and also allows the removal of some
cleanups.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
Nick Clifton [Fri, 9 Mar 2018 14:37:36 +0000 (14:37 +0000)]
Fix Sparc, s390 and AArch64 targets so that they can handle relocs against ifunc symbols found in note sections.
Following on from PR 22929, I have found the same problem exists with
other ifunc supporting targets too. Plus see this link for the bug
being reported against the s390x binutils for Fedora rawhide:
So I am going to check in the patch below which applies the same
change that H.J. made for the x86_64 target to the other affected
targets. (Specifically: S390, AArch64 and Sparc). Plus it adds a new
test to the linker testsuite to make sure that this problem stays
fixed.
bfd * elf64-s390.c (elf_s390_relocate_section): Move check for
relocations against non-allocated sections to before the code that
handles ifunc relocations.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Treat
relocs against IFUNC symbols in non-allocated sections as relocs
against FUNC symbols.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.
ld * testsuite/ld-ifunc/ifuncmod5.s: New test. Checks that targets
that support IFUNC symbols can handle relocations against those
symbols in NOTE sections.
* testsuite/ld-ifunc/ifuncmod5.d: New file: Driver for the new
test.
* testsuite/ld-ifunc/ifunc.exp: Run the new test.
Tom Tromey [Wed, 7 Mar 2018 22:55:01 +0000 (15:55 -0700)]
Change enable_thread_stack_temporaries to an RAII class
This started as a patch to change enable_thread_stack_temporaries to
be an RAII class, but then I noticed that this code used a VEC, so I
went ahead and did a bit more C++-ification, changing
stack_temporaries_enabled to a bool and changing stack_temporaries to
a std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* infcall.c (struct call_return_meta_info)
<stack_temporaries_enabled>: Remove.
(get_call_return_value, call_function_by_hand_dummy): Update.
* thread.c (disable_thread_stack_temporaries): Remove.
(enable_thread_stack_temporaries): Remove.
(thread_stack_temporaries_enabled_p): Return bool.
(push_thread_stack_temporary, value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Update.
* eval.c (evaluate_subexp): Update.
* gdbthread.h (class enable_thread_stack_temporaries): Now a
class, not a function.
(value_ptr, value_vec): Remove typedefs.
(class thread_info) <stack_temporaries_enabled>: Now bool.
<stack_temporaries>: Now a std::vector.
(thread_stack_temporaries_enabled_p)
(value_in_thread_stack_temporaries): Return bool.
Simon Marchi [Fri, 9 Mar 2018 00:00:03 +0000 (19:00 -0500)]
Fix misreporting of omitted bytes for large remote packets
In remote.c, when the output of "set debug remote" is truncated, the
number of characters reported is incorrect. What is reported is the
number of characters added by the quoting, not the number of characters
that were truncated.
Simon Marchi [Thu, 8 Mar 2018 23:57:53 +0000 (18:57 -0500)]
Use std::string to simplify build_id_to_debug_bfd
Using std::string here makes the string building simpler thank playing
with char*. A stack allocation is replaced with heap allocation, but
I don't think this is really performance-critical code.
gdb/ChangeLog:
* build-id.c (build_id_to_debug_bfd): Use std::string.
Simon Marchi [Thu, 8 Mar 2018 23:04:46 +0000 (18:04 -0500)]
Add xml_escape_text_append and use it
[This patch should go on top of "linux_qxfer_libraries_svr4: Use
std::string", I should have sent them together as a series.]
I noticed that linux_qxfer_libraries_svr4 used xml_escape_text, which
returns an std::string. That string is then copied into a larger
buffer. It would be more efficient if we had a version of
xml_escape_text which appended to an existing string instead of
returning a new one. This is what this patch does.
I manually verified that the output of linux_qxfer_libraries_svr4 didn't
change before/after the patch.
gdb/ChangeLog:
* common/xml-utils.c (xml_escape_text): Move code to...
(xml_escape_text_append): ... this new function.
* common/xml-utils.h (xml_escape_text_append): New declaration.
* unittests/xml-utils-selftests.c (test_xml_escape_text_append):
New function.
(_initialize_xml_utils): register test_xml_escape_text_append as
a selftest.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Use
xml_escape_text_append.
there seems to be situations where the remote-stdio-gdbserver board
fails to delete the uploaded binary file. Passing "target" fixes the
issue for Christian who reported the bug.
I did not experience this problem, but passing "target" to remote_exec
still works for me, so I'm fine with changing it.
Any objection?
gdb/testsuite/ChangeLog:
PR gdb/22841
* boards/remote-stdio-gdbserver.exp (${board}_file): Pass
"target" to remote_exec.
the local gdbserver boards (except native-extended-gdbserver...) were
considered as remote by DejaGNU. To avoid DejaGNU trying to use ssh/scp
to download the files to the target (which is actually local), the
gdbserver-base.exp file defined some _download, _upload and _file board
operations to override the default behavior, and instead just use local
operations.
The same patch also changed remote-stdio-gdbserver.exp to make it
inherit from gdbserver-base.exp. Since then, this board (which is
actually remote) uses the overrides with local file operations. As a
result, files are never actually copied to the target.
I think we can simply remove the overrides from gdbserver-base.exp.
Because all boards should be properly considered local or remote by
DejaGNU, it should by default use the right method for transferring
files.
H.J. Lu [Thu, 8 Mar 2018 14:36:40 +0000 (06:36 -0800)]
x86: Treat relocation against IFUNC symbol as FUNC
When resolving a relocation against IFUNC symbol in a SHT_NOTE section
without SHF_ALLOC, we treat it as relocation against FUNC symbol since
it needs the address of IFUNC symbol, not the address returned by IFUNC
function.
bfd/
PR ld/22929
* elf32-i386.c (elf_i386_relocate_section): Treat relocation
against IFUNC symbol in SHT_NOTE section without SHF_ALLOC as
relocation against FUNC symbol.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
Jan Beulich [Thu, 8 Mar 2018 07:58:55 +0000 (08:58 +0100)]
x86: fold several AVX512VL templates
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold
these as far as possible, and also fold register-only forms. Further
folding is possible, but needs other prereq work done first.
A note regarding EVEXDYN: This is intended to be used only when no other
properties of the template would make is_evex_encoding() return true. In
all "normal" cases I think it is preferable to omit this indicator, to
keep the table half way readable.
Jan Beulich [Thu, 8 Mar 2018 07:58:05 +0000 (08:58 +0100)]
x86: fold certain AVX512 rotate and shift templates
Their memory forms were bogusly using VexLWP instead of VexNDD. Adjust
VexNDD handling to cope with these, allowing their register and memory
forms to be folded.
Jan Beulich [Thu, 8 Mar 2018 07:56:47 +0000 (08:56 +0100)]
x86: fold a few AVX512F templates
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold them
as far as possible. Further folding is possible, but needs other prereq
work done first.
Jan Beulich [Thu, 8 Mar 2018 07:52:27 +0000 (08:52 +0100)]
x86: drop {X,Y,Z}MMWORD_MNEM_SUFFIX
They aren't really useful (anymore?): The conflicting operand size check
isn't applicable to any insn validly using respective memory operand
sizes (and if they're used wrongly, another error would result), and the
logic in process_suffix() can be easily changed to work without them.
While re-structuring conditionals in process_suffix() also drop the
CMPXCHG8B special case in favor of a NoRex64 attribute in the opcode
table.
Jan Beulich [Thu, 8 Mar 2018 07:51:18 +0000 (08:51 +0100)]
x86: correct operand size match checks for BMI/BMI2 insns
Some BMI/BMI2 insns allow their middle operands to be a memory one. In
such a case, matching register types between operands 0 and 1 as well as
1 and 2 won't help - operands 0 and 2 also need to be checked.
Jan Beulich [Thu, 8 Mar 2018 07:48:10 +0000 (08:48 +0100)]
x86: simplify result processing of cpu_flags_match()
Make more obvious what the success and failure paths are, and in
particular that what used to be at the "skip" label can't be reached
by what used to be straight line code.
Jan Beulich [Thu, 8 Mar 2018 07:47:32 +0000 (08:47 +0100)]
x86: add GFNI, VAES, and VPCLMUL checking to cpu_flags_match()
Just like for the AVX/AES and AVX/PCLMUL combinations, AVX/GFN,
AVX512F/GFNI, AVX512F/VAES, and AVX512F/PCLMUL need special handling to
deal with the pair of required checks specified in the templates.
Jan Beulich [Thu, 8 Mar 2018 07:35:48 +0000 (08:35 +0100)]
x86: avoid SSE check for LDMXCSR/STMXCSR
Neither touches any XMM register, so the check is pointless. It is imo
even questionable whether in SSE2AVX mode the two should be converted to
their AVX counterparts.
Jan Beulich [Thu, 8 Mar 2018 07:33:06 +0000 (08:33 +0100)]
x86/Intel: correct disassembly of fsub*/fdiv*
fsub/fsubr/fsubp/fsubrp as well as fdiv/fdivr/fdivp/fdivrp disassembly
should match (a) the Intel SDM and (b) respective input fed to gas (both
of course with the exception of when we intentionally convert bogus
insns, accompanied by a warning).
Jan Beulich [Thu, 8 Mar 2018 07:27:28 +0000 (08:27 +0100)]
x86: adjust 4-XMM-register-group related warning
Drop "second": For one there's no other source register (the other
source operand is in memory), and in Intel syntax such numbering would
also be wrong.
Take the opportunity and also
- properly place declarations ahead of statements
- use %u format for unsigned int arguments
- fix indentation
Jan Beulich [Thu, 8 Mar 2018 07:25:31 +0000 (08:25 +0100)]
x86: fold AVX vcvtpd2ps memory forms
This requires a change to ModR/M handling: Recording of displacement
types must not discard operand size information. Change the respective
code to alter only .disp<N>.
Alan Modra [Wed, 7 Mar 2018 23:47:41 +0000 (10:17 +1030)]
Remove unnecessary power9 group terminating nop
Power9 doesn't have a group terminating nop, so we may as well emit a
normal nop for power9. Not that it matters a great deal, I believe
ori 2,2,0 will be treated exactly as ori 0,0,0 by the hardware.
* config/tc-ppc.c (ppc_handle_align): Don't emit a group
terminating nop for power9.
Tom Tromey [Thu, 23 Nov 2017 06:37:38 +0000 (23:37 -0700)]
Return gdb::optional<std::string> from target_fileio_readlink
This changes to_fileio_readlink and target_fileio_readlink to return a
gdb::optional<std::sring>, and then fixes up the callers and
implementations. This allows the removal of some cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-07 Tom Tromey <tom@tromey.com>
Sriraman Tallam [Wed, 7 Mar 2018 20:15:49 +0000 (12:15 -0800)]
New option -z,keep-text-section prefix.
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
Andreas Arnez [Wed, 7 Mar 2018 13:29:19 +0000 (14:29 +0100)]
Fix watching structs in C++
Some of the watchpoint logic depends on the fact that the head of the
value chain represents the user-specified value to watch. Thus no
additional values should be added to the value chain after that. However,
if a watchpoint is defined for a C++ structure/class object, then run-time
type information (RTTI) may be present. Thus, while constructing the
value chain for the watchpoint, the dynamic type is fetched by
gnuv3_rrti_type, which invokes value_addr, which then adds a new value to
the head of the value chain. This new value represents the pointer to the
structure instead of the structure itself.
With such a "polluted" value chain the watchpoint logic does not recognize
when the user intended to watch a struct, and can_use_hardware_watchpoint
returns zero. Instead of a hardware watchpoint, a software watchpoint
will then be set for no apparent reason.
This is fixed by adding an early exit to gnuv3_rtti_type when the input
value is not a dynamic class object.
gdb/testsuite/ChangeLog:
* gdb.cp/watch-cp.cc: New test.
* gdb.cp/watch-cp.exp: New file.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_rtti_type): Add early exit if the given
value is not a dynamic class object.
H.J. Lu [Wed, 7 Mar 2018 12:18:45 +0000 (04:18 -0800)]
x86: Rewrite NOP generation for fill and alignment
Rewrite NOP generation for fill and code alignment by:
1. Add a 11-byte NOP with another 0x66 prefix.
2. Remove the multi-byte NOP entries which consist of 2 instructions.
3. Select proper NOPs based on ISA and processor tuning.
4. Generate multiple NOPs with the longer NOPs first followed by the
shorter NOP.
5. Use jump for larger NOP padding:
a. > 8 bytes (2 NOPs) in 16-bit mode.
b. > 14 bytes (2 NOPs) for older processors.
c. > 77 bytes (7 NOPs) for newer processors.
6. Update MAX_MEM_FOR_RS_ALIGN_CODE to 4095.
Alan Modra [Wed, 7 Mar 2018 00:36:15 +0000 (11:06 +1030)]
XCOFF disassembler
xcoff (32-bit) objdump accepted but ignored -M options unless
-mpowerpc was also given. This patch fixes that, leaving the default
as -Mpwr for xcoff. I've also enabled more tests for xcoff targets.
binutils/
* configure.ac: Add objdump_private_desc_xcoff for rs6000.
* configure: Regenerate.
gas/
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
opcodes/
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.