Andreas Tobler [Fri, 1 Feb 2013 20:54:18 +0000 (20:54 +0000)]
2013-02-01 Andreas Tobler <andreast@fgznet.ch>
* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.
Jan Kratochvil [Fri, 1 Feb 2013 19:39:04 +0000 (19:39 +0000)]
gdb/
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.
gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.
Tom Tromey [Thu, 31 Jan 2013 19:55:15 +0000 (19:55 +0000)]
* jit.c (jit_program_space_data): Rename from jit_inferior_data;
change type.
(struct jit_program_space_data): Rename from jit_inferior_data.
Update comments.
(get_jit_program_space_data): Rename from get_jit_inferior_data.
Change return type. Attach data to program space.
(jit_program_space_data_cleanup): Rename from
jit_inferior_data_cleanup; change argument type.
(jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
change type.
(jit_register_code): Update.
(jit_update_inferior_cache): Remove.
(jit_breakpoint_deleted): Get jit data from the location's program
space.
(jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
'ps_data', change type.
(jit_inferior_init, jit_breakpoint_re_set_internal)
(jit_event_handler): Update.
(free_objfile_data): Get data from objfile's program space.
(_initialize_jit): Update.
Tom Tromey [Thu, 31 Jan 2013 19:52:03 +0000 (19:52 +0000)]
PR gdb/13987:
* jit.c (struct jit_inferior_data) <cached_code_address,
jit_breakpoint>: New fields.
(jit_breakpoint_re_set_internal): Fix logging. Only create
breakpoint if cached address has changed.
(jit_update_inferior_cache, jit_breakpoint_deleted): New
functions.
(_initialize_jit): Register breakpoint deleted observer.
gdb/testsuite
* gdb.base/jit.exp (compile_jit_test): New proc.
Add PIE tests.
Nick Clifton [Mon, 28 Jan 2013 15:28:40 +0000 (15:28 +0000)]
PR gas/15069
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
Alan Modra [Mon, 28 Jan 2013 12:30:17 +0000 (12:30 +0000)]
* elf64-ppc.c: Use %T to print symbols names and remove redundant
"relocation" in error messages throughout file.
(ppc64_elf_relocate_section): Remove sibling call error message,
replace with "call lacks nop". Specially report errors for
branches to function entry points via OPD lookup and branches
to stubs. Remove NULL symbol handling now done by %T.
Nick Clifton [Mon, 28 Jan 2013 10:06:51 +0000 (10:06 +0000)]
* simops.c (v850_rotl): New function.
(v850_bins): New function.
* simops.h: Add prototypes fir v850_rotl and v850_bins.
* v850-dc: Add entries for V850e3v5.
* v850.igen: Add support for v850e3v5.
(ld.dw, st.dw, rotl, bins): New patterns.
* valops.c (find_overload_match): Remove unused argument 'lax'.
* value.h: Remove unused argument 'lax' from the declaration of
find_overload_match.
* eval.c (value_subexp_standard): Do not pass a 'lax' argument
to find_overload_match.
* valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
argument to find_overload_match.
Cary Coutant [Fri, 25 Jan 2013 21:15:54 +0000 (21:15 +0000)]
binutils/
* dwarf.c (display_loc_list): Update offset for each line
printed.
(print_addr_index): New function.
(display_loc_list_dwo): Update offset for each line printed.
Fix problems displaying loclists in .dwo files. Add support
for type 4 entries.
(display_debug_loc): Remove custom header for .dwo files.
(display_debug_addr): Adjust formatting.
GDB sends packet "qC" in [1] and adds the thread/inferior if the remote
stubs understands "qC". In [2], GDB looks for the inferior to build a
regcache, and notices a new inferior in [3]. As we can see, GDB assumes
that the inferior can be found in [2]. Once the remote stub doesn't
support "qC", GDB can't look for the inferior in [2], and emits an
internal error.
Right after the initial connection, we query the target for its state,
with the ? packet. We store the resulting wait status / stop reply
aside, and query the target for the current thread, using qC, which
fails, so we fake a ptid for the target's thread. We then later,
after the initial setup, end up consuming that set-aside wait status,
parsing the T stop reply, which contains a "thread" "register" (which
was the thread the target would have replied to qC). We get into
trouble because the ptid in that stop reply doesn't match our faked up
ptid in the initial setup, although the target threads are the same...
So we had the T stop reply handy all along. We might as well extract
the thread's ptid from it, and avoid all the resulting issues.
qC is also used after vRun, in order to discover the new process'es
main thread. But, vRun's reply is also a wait status, just like
'?''s, which is quite convenient.
This means that if we have a "Txx thread: ptid" reply, then we don't
really need qC. The patch makes GDB look in the T reply first, and if
not found, try with qC. The packet handling seems to have been added
in gdb-4.18 (1999), and I see that in that same release, "Txx thread:
ptid" didn't exist yet, which probably explains why nobody though of
doing this before.
Regression tested against a gdbserver with qC disabled (and then
enabled), on x86_64 Fedora 17.
2013-01-25 Pedro Alves <palves@redhat.com>
* remote.c (stop_reply_extract_thread): New.
(add_current_inferior_and_thread): New parameter 'wait_status'.
Handle it.
(remote_start_remote): Pass wait status to
add_current_inferior_and_thread.
(extended_remote_run): Update comment.
(extended_remote_create_inferior_1): Pass wait status to
add_current_inferior_and_thread.
gdb/ChangeLog
* valarith.c (value_vector_widen): New function for replicating a
scalar into a vector.
(value_binop): Use value_vector_widen to widen scalar to vector
rather than casting, this better matches gcc C behaviour.
* valops.c (value_casst): Update logic for casting between vector
types, and for casting from scalar to vector, try to match gcc C
behaviour.
* value.h (value_vector_widen): Declare.
* opencl-lang.c (opencl_value_cast): New opencl specific casting
function, handle special case for casting scalar to vector.
(opencl_relop): Use opencl_value_cast.
(evaluate_subexp_opencl): Use opencl_value_cast instead of
value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
in order to use opencl_value_cast.
gdb/testsuite/ChangeLog
* gdb.base/gnu_vector.c: New variable for use in tests.
* gdb.base/gnu_vector.exp: Update and extend tests to reflect
changes in scalar to vector casting and widening.
* gdb.python/py-type.c: New variables for use in tests.
* gdb.python/py-type.exp: Update vector related tests to reflect
changes in scalar to vector casting and widening.
Kai Tietz [Fri, 25 Jan 2013 11:39:42 +0000 (11:39 +0000)]
* deffilep.y (def_image_name): Adjust type of base-address
argument.
(%union): Add new type bfd_vma as vma.
(VMA): New rule.
(opt_base): Use VMA instead of NUMBER rule to evaluate value.
(def_file_print): Use bfd's fprintf_vma to output base-address.
Sriraman Tallam [Thu, 24 Jan 2013 18:49:55 +0000 (18:49 +0000)]
Default text reordering fix with a flag to turn it off.
2013-01-24 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::layout): Check for option text_reorder.
(Layout::make_output_section): Ditto.
* options.h (text_reorder): New option.
* output.cc (Input_section_sort_compare): Remove special ordering
of section names.
(Output_section::
Input_section_sort_section_name_special_ordering_compare::
operator()): New function.
(Output_section::sort_attached_input_sections): Use new sort function
for .text.
* output.h (Input_section_sort_section_name_special_ordering_compare):
New struct.
* testsuite/Makefile.am (text_section_grouping): Test option
--no-text-reorder
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.sh: Check order of functions without
default text reordering.
projects / thirdparty / binutils-gdb.git / log
