Khem Raj [Mon, 14 Nov 2016 05:35:46 +0000 (21:35 -0800)]
cmake.bbclass: Set CXXFLAGS and CFLAGS
We strip the TOOLCHAIN_OPTIONS and HOST_CC_ARCH from CC/CXX in cmake.bbclass
whereas CFLAFS and CXXFLAGS assume that TOOLCHAIN_OPTIONS are
part of CC/CXX variables, this causes compile failures when cmake
is running compiler tests during configure on some architectures
especially armhf, because hf ABI information -mfloat-abi is part
of TOOLCHAIN_OPTIONS, so what happens is that testcase gets compiled
without hard-float, howver, during linking the float ABI option
is passed via LDFLAGS, now linker rejects this and fails like
/mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: error: cmTC_27947 uses VFP register arguments, CMakeFiles/cmTC_27947.dir/src.cxx.o does not
mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: failed to merge target specific data of file CMakeFiles/cmTC_27947.dir/src.cxx.o
collect2: error: ld returned 1 exit status
This means that CMake now fails the configure time test too
which is not right, e.g. it might disable features which actually do exist
and should be enabled e.g. in case above it is resulting as below
Performing C++ SOURCE FILE Test HAS_BUILTIN_SYNC_SUB_AND_FETCH failed with the following output:
Its actually a bug in CMake see
https://gitlab.kitware.com/cmake/cmake/issues/16421
CMake is ignoring CMAKE_CXX_FLAGS when using CHECK_CXX_SOURCE_COMPILES
function.
Until it is fixed upstream, we add HOST_CC_ARCH and TOOLCHAIN_OPTIONS
to CFLAGS and CXXFLAGS, so that we can ensure that compiler invocation
remains consistent.
Zhixiong Chi [Mon, 14 Nov 2016 09:46:52 +0000 (17:46 +0800)]
tiff: Security fix CVE-2016-3658
The TIFFWriteDirectoryTagLongLong8Array function in tif_dirwrite.c in the tiffset tool
allows remote attackers to cause a denial of service (out-of-bounds read) via vectors
involving the ma variable.
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Linus Wallgren [Fri, 28 Oct 2016 14:36:27 +0000 (16:36 +0200)]
systemd: Reload configuration on package install
When a systemd service file has changed it is required to reload
systemd's configuration. Otherwise changes to a service file will not be
picked up during package upgrade.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
André Draszik [Wed, 9 Nov 2016 14:48:53 +0000 (14:48 +0000)]
openssl: fix bashism in c_rehash shell script
This script claims to be a /bin/sh script, but it uses
a bashism:
from checkbashisms:
possible bashism in meta/recipes-connectivity/openssl/openssl/openssl-c_rehash.sh line 151 (should be 'b = a'):
if [ "x/" == "x$( echo ${FILE} | cut -c1 -)" ]
This causes build issues on systems that don't have
/bin/sh symlinked to bash:
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Linus Wallgren [Mon, 14 Nov 2016 16:20:13 +0000 (17:20 +0100)]
lib/oe/package_manager: .deb pre/postinst args
The debian policy manual and MaintainerScripts wiki page states that the
postinst script is supposed to be called with the `configure` argument
at first install, likewise the preinst script is supposed to be called
with the `install` argument on first install.
Kai Kang [Sun, 9 Oct 2016 08:34:32 +0000 (16:34 +0800)]
bitbake: COW.py: fix sample codes
The call of methods iteritems() and itervalues() in sample codes were
replaced by items() and values() to convert to Python 3 by Bitbake rev d0f904d407f57998419bd9c305ce53e5eaa36b24. But the methods iteritems()
and itervalues() belong to class COWDictMeta not class dict or set. The
modifications should not be made in purpose that it fails to run sample
codes, so revert them.
Michael Wood [Thu, 10 Nov 2016 03:52:34 +0000 (19:52 -0800)]
bitbake: toaster: layerindex updater Take into account layers being predefined
As we can now provide layer definitions through fixtures we need to be
more clever how we update the metadata in the database to avoid
duplicate metadata being created. To do this we make more effort to
match existing data in the database and update only the fields which
will be better provided by the layer index.
This removes the need for us to special case layers which are provided
as part of poky such as openembedded-core or meta-poky which exist on
the layerindex but with different git urls.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Thu, 10 Nov 2016 03:52:33 +0000 (19:52 -0800)]
bitbake: toaster: orm/fixtures Add the master release and correct morty release
Add the master release option to base your project on and correct the
morty release so that for poky based setups we use the poky provided
version of the layer rather than checking out the layer from its own git
repository.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Mon, 14 Nov 2016 09:39:14 +0000 (10:39 +0100)]
bitbake: taskdata.py: improve handling of depends/rdepends
Error handling only caught the cause where a dependency did not have
any colon, but ignored the case where more than one was given. Now
"pn:task:garbage" will raise an error instead of ignoring ":garbage".
The error message had a misplaced line break (?) with the full stop
on the next line. Indenting the explanation with a space might have
been intended and is kept.
split() was called three times instead of just once.
Instead of improving the two instances of the code (one for 'depends',
one for 'rdepends'), the common code is now in a helper function.
Patrick Ohly [Mon, 14 Nov 2016 09:39:00 +0000 (10:39 +0100)]
bitbake: data_smart.py: don't reorder internal bitbake variables when calculating hash
Commit 260ced745 added __BBTASKS, __BBANONFUNCS, __BBHANDLERS to the
data that gets hashed, but only after reordering these lists. The
intention probably was to make the hash deterministic, but that's
unnecessary (the content of the variables should already be
deterministic) and hides potential reasons that might require
re-parsing.
Richard Purdie [Wed, 16 Nov 2016 11:20:42 +0000 (11:20 +0000)]
bitbake: data_smart: Default to expansion for getVar/getVarFlags
We've been building to this for a while, default to return expanded
values for getVar/getVarFlags.
We can then go through and remove the "True" option to many of the
calls to this function, all function calls should have a default by now
though since the parameter has been required for a while.
Richard Purdie [Wed, 16 Nov 2016 11:20:06 +0000 (11:20 +0000)]
bitbake: data: Drop deprecated old style bitbake API
The old style bb.data.getVar/setVar API has long since been deprecated in
favour of d.getVar/setVar and friends.
Now we're about to change the default expansion parameter, drop the old APIs
to simplify the transition and ensure everyone is using the new style functions.
Conversion is trivial if there are remaining stragglers.
I've left bb.data.expand() for now since its more widely used but would make a good
follow up patch series.
Richard Purdie [Wed, 16 Nov 2016 11:19:01 +0000 (11:19 +0000)]
bitbake: lib/bb: Don't use deprecated bb.data.getVar/setVar API
The old style bb.data.getVar/setVar API is obsolete. Most of bitbake
doesn't use it but there were some pieces that escaped conversion. This
patch fixes the remaining users mostly in the fetchers.
If ud.ignore_checksums is set (which we currently use to suppress the
warnings for missing SRC_URI checksums when fetching files from
scripts), then if we're fetching an npm package we should similarly
suppress the warnings when NPM_LOCKDOWN and NPM_SHRINKWRAP aren't set.
At the same time, make any errors reading either of these files actual
errors since if the file is specified and could not be found, that
should be an error - not the exact same warning.
brian avery [Fri, 4 Nov 2016 12:27:06 +0000 (12:27 +0000)]
bitbake: toaster: settings set ALLOWED_HOSTS to * in debug mode
As of Django 1.8.16, Django is rejecting any HTTP_HOST header that is
not on the ALLOWED_HOST list. We often need to reference the
toaster server via a fqdn, if we start it via webport=0.0.0.0:8000 for
instance, and are hitting the server from a laptop. This change does
reduce the protection from a DNS rebinding attack, however, if you are
running the toaster server outside a protected network, you should be
using the production instance.
Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Tue, 15 Nov 2016 17:40:34 +0000 (09:40 -0800)]
documentation: Added new appendix for customizing standard SDK
Fixes [YOCTO #8584]
This fix essentially had to document how to add the API
documentation to the standard SDK. The fix required adding a
new appendix to the SDK manual on how to customize that
standard SDK. I could not put just one topic in a new appendix
so I also added a sub-section on how to add indidual packages
to the standard SDK.
Other changes here were the introduction of a new file for the new
appendix, updated the mega-manual.xml file so that it would include
the new chapter when the MM was built. Finally, I added some
cross-referencing to the new appendix from the TOOLCHAIN_HOST_TASK
and TOOLCHAIN_TARGET_TASK variables. And a cross reference from the
distro features section on the api-documentation bullet.
Scott Rifenbark [Thu, 3 Nov 2016 21:10:18 +0000 (14:10 -0700)]
dev-manual: Updated "Exporting Tests" section
Fixed [YOCTO #10588]
This section was confusing due to the fact that it used an actual
set of IP addresses and image name where they should be clearly
called out as examples. Fixed it.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Mon, 7 Nov 2016 22:48:46 +0000 (22:48 +0000)]
poky: update SANITY_TEST_DISTROS for new format
The distribution identifier determined by oe.lsb.distro_identifier()
is now returned as a lowercase string. Update the values for tested
distros to match.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maciej Borzecki [Thu, 10 Nov 2016 12:18:37 +0000 (13:18 +0100)]
oe-selftest: fix handling of test cases without ID in --list-tests-by
Running `oe-selftest --list-tests-by module wic` will produce the
following backtrace:
Traceback (most recent call last):
File "<snip>/poky/scripts/oe-selftest", line 668, in <module>
ret = main()
File "<snip>/poky/scripts/oe-selftest", line 486, in main
list_testsuite_by(criteria, keyword)
File "<snip>/poky/scripts/oe-selftest", line 340, in list_testsuite_by
ts = sorted([ (tc.tcid, tc.tctag, tc.tcname, tc.tcclass, tc.tcmodule) for tc in get_testsuite_by(criteria, keyword) ])
TypeError: unorderable types: int() < NoneType()
The root cause is that a test case does not necessarily have an ID
assigned, hence its value is None. Since Python 3 does not allow
comparison of heterogeneous types, TypeError is raised.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maciej Borzecki [Thu, 10 Nov 2016 12:18:34 +0000 (13:18 +0100)]
wic: check that filesystem is specified for a rootfs partition
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maciej Borzecki [Thu, 10 Nov 2016 12:18:33 +0000 (13:18 +0100)]
wic: use partition size when creating empty partition files
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit c8669749e37fe865c197c98d5671d9de176ff4dd, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Lock [Tue, 8 Nov 2016 14:49:56 +0000 (14:49 +0000)]
lib/oe/lsb: attempt to ensure consistent distro id regardless of source
The LSB Distributor ID and os-release NAME differ for most of the
distributions tested by the Yocto Project (CentOS, Debian, Fedora,
openSUSE and Ubuntu) however for all but openSUSE the os-release ID
matches the LSB Distributor ID when both are lowered before
comparison.
Therefore, in order to improve the consistency of identification of
a distribution, switch to using the os-release ID and converting
the ID value to lowercase.
Table showing comparison of LSB Distributor ID to os-release fields NAME
and ID for current Yocto Project supported host distributions:
Joshua Lock [Tue, 8 Nov 2016 14:49:55 +0000 (14:49 +0000)]
lib/oe/lsb: prefer /etc/os-release for distribution data
os-release(5) is an increasingly standard source of operating system
identification and more likely to be present on modern OS deployments, i.e.
many container variants of common distros include os-release and not the
lsb_release tool.
Therefore we should favour parsing /etc/os-release in distro_identifier(),
try lsb_release when that fails and finally fall back on various distro
specific sources of OS identification.
Joshua Lock [Tue, 8 Nov 2016 14:49:54 +0000 (14:49 +0000)]
lib/oe/lsb: make the release dict keys consistent regardless of source
Rather than have the distro_identifier method look for different keys in
the dict depending on the source ensure that each function for retrieving
release data uses the same key names in the returned dict.
webkitgtk: drop patch 0001-WebKitMacros-Append-to-I-and-not-to-isystem.patch
* This patch is not longer needed. Upstream has fixed this issue in:
https://trac.webkit.org/changeset/205672 which is already included
in WebKitGTK+ >= 2.14.0
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 8 Nov 2016 23:07:41 +0000 (23:07 +0000)]
systemtap: remove explicit msgfmt check
Passing --disable-nls should be enough to disable the requirement for a full
gettext to be present, but the upstream configure explicitly checks for msgfmt
even if it isn't going to be used. To avoid having to depend on gettext-native,
patch this check out.
Khem Raj [Tue, 8 Nov 2016 15:19:32 +0000 (07:19 -0800)]
x264: Update to latest on stable branch
- unexport AS variable
- Switch URI to use github mirror for reliabality
- Disable openCL code, its not used
- TEXTRELs are fixed, therefore dont skip QA check
Fabio Berton [Tue, 8 Nov 2016 11:52:48 +0000 (09:52 -0200)]
libpcap: Update to version 1.8.1
- Option --enable-canusb was removed on commit:
https://github.com/the-tcpdump-group/libpcap/commit/93ca5ff7030aaf1219e1de05ec89a68384bfc50b
- Autotools class was improved and we can now stop aclocal from running at all.
- File configure.in was renamed to configure.ac, rework libpcap-pkgconfig-support
patch and do_configure_prepend task to use configure.ac file.
Ed Bartosh [Mon, 24 Oct 2016 13:54:41 +0000 (16:54 +0300)]
systemd-bootdisk.wks: use PARTUUID
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Mon, 7 Nov 2016 07:25:26 +0000 (23:25 -0800)]
libbsd: Fix build with musl
a.out.h support is not across all architectures only
x86/x86_64 support is in linux/a.out.h, this patch
abstracts the minimum needed constructs into itself
Li Zhou [Mon, 7 Nov 2016 03:02:16 +0000 (11:02 +0800)]
db: disable the ARM assembler mutex code
The swpb in macro MUTEX_SET will cause "undefined instruction" error
on the new arm arches which don't support this assembly instruction
any more. If use ldrex/strex to replace swpb, the old arm arches don't
support them. So to avoid this issue, just disable the ARM assembler
mutex code, and use the default pthreads mutex.
Signed-off-by: Li Zhou <li.zhou@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fabio Berton [Fri, 4 Nov 2016 11:08:38 +0000 (09:08 -0200)]
gawk: Update to version 4.1.4
Add patch to remove hashbang line in file test/arrayind1.awk. This
patch fixes:
/
|WARNING: gawk-4.1.4-r0 do_package_qa: QA Issue:
|/usr/lib/gawk/ptest/test/arrayind1.awk contained in package gawk-ptest
|requires /usr/local/bin/awk, but no providers found in RDEPENDS_gawk-ptest?
|[file-rdeps]
\
André Draszik [Fri, 4 Nov 2016 11:06:31 +0000 (11:06 +0000)]
cve-check.bbclass: CVE-2014-2524 / readline v5.2
Contrary to the CVE report, the vulnerable trace functions
don't exist in readline v5.2 (which we keep for GPLv2+
purposes), they were added in readline v6.0 only - let's
whitelist that CVE in order to avoid false positives.
See also the discussion in
https://patchwork.openembedded.org/patch/81765/
Joe Konno [Thu, 3 Nov 2016 23:46:10 +0000 (16:46 -0700)]
initrdscripts: add support for NVME target install
Add awareness of /dev/nvme* block devices to install scripts. As presently
written, installer knows only of /dev/sd* and /dev/mmcblk* block devices.
Building upon scaffolding put in place by Awais in...
80ec9f627915 ("initrdscripts: handle mmc device as installer medium")
Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fabio Berton [Thu, 3 Nov 2016 20:41:58 +0000 (18:41 -0200)]
curl: Update to version 7.51.0
CVE fixed in 7.51.0:
CVE-2016-8615: cookie injection for other servers
CVE-2016-8616: case insensitive password comparison
CVE-2016-8617: OOB write via unchecked multiplication
CVE-2016-8618: double-free in curl_maprintf
CVE-2016-8619: double-free in krb5 code
CVE-2016-8620: glob parser write/read out of bounds
CVE-2016-8621: curl_getdate read out of bounds
CVE-2016-8622: URL unescape heap overflow via integer truncation
CVE-2016-8623: Use-after-free via shared cookies
CVE-2016-8624: invalid URL parsing with '#'
CVE-2016-8625: IDNA 2003 makes curl use wrong host
To see complete log access link bellow:
https://curl.haxx.se/changes.html#7_51_0
Ross Burton [Mon, 7 Nov 2016 14:11:01 +0000 (14:11 +0000)]
lib/oe/qa: handle binaries with segments outside the first 4kb
The ELF parser was assuming that the segment tables are in the first 4kb of the
binary. Whilst this generally appears to be the case, there have been instances
where the segment table is elsewhere (offset 2MB, in this sample I have). Solve
this problem by mmap()ing the file instead.
Also clean up the code a little whilst chasing the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu: Split out the base name of QB_DEFAULT_KERNEL
The function write_qemuboot_conf() in qemuboot.bbclass always inserts
the full path into QB_DEFAULT_KERNEL. Remove this path before using the
variable.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster [Fri, 4 Nov 2016 05:53:28 +0000 (22:53 -0700)]
tzdata: update to 2016i
Briefly: Cyprus split into two time zones on 2016-10-30, and Tonga
reintroduces DST on 2016-11-06.
Changes to future time stamps
Pacific/Tongatapu begins DST on 2016-11-06 at 02:00, ending on
2017-01-15 at 03:00. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. (Thanks to Pulu ʻAnau.) Switch to numeric
time zone abbreviations for this zone.
Changes to past and future time stamps
Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta. (Thanks to Even Scharning and Matt Johnson.)
Antarctica/Casey switched from +08 to +11 on 2016-10-22.
(Thanks to Steffen Thorsen.)
Changes to past time stamps
Several corrections were made for pre-1975 time stamps in Italy.
These affect Europe/Malta, Europe/Rome, Europe/San_Marino, and
Europe/Vatican.
First, the 1893-11-01 00:00 transition in Italy used the new UT
offset (+01), not the old (+00:49:56). (Thanks to Michael
Deckers.)
Second, rules for daylight saving in Italy were changed to agree
with Italy's National Institute of Metrological Research (INRiM)
except for 1944, as follows (thanks to Pierpaolo Bernardi, Brian
Inglis, and Michael Deckers):
The 1916-06-03 transition was at 24:00, not 00:00.
The 1916-10-01, 1919-10-05, and 1920-09-19 transitions were at
00:00, not 01:00.
The 1917-09-30 and 1918-10-06 transitions were at 24:00, not
01:00.
The 1944-09-17 transition was at 03:00, not 01:00. This
particular change is taken from Italian law as INRiM's table,
(which says 02:00) appears to have a typo here. Also, keep the
1944-04-03 transition for Europe/Rome, as Rome was controlled by
Germany then.
The 1967-1970 and 1972-1974 fallback transitions were at 01:00,
not 00:00.
André Draszik [Fri, 4 Nov 2016 10:53:33 +0000 (10:53 +0000)]
image-buildinfo: treat staged changes as modified branch, too
When staging changes in a layer using git add, image-buildinfo
doesn't detect this as a modification, because of the way it
uses git diff.
Surely, merely staging, but not committing changes to git
should not result in image-buildhistory assuming that the
git repository hasn't been modified compared to the branch
HEAD, this state should be treated similarly to modifications
being unstaged.
We have to use both, git diff and git diff --cached to get the
desired result.
Ross Burton [Wed, 2 Nov 2016 23:04:46 +0000 (23:04 +0000)]
Revert "oeqa/selftest/kernel.py: Add new file destined for kernel related tests"
breaking on selftest
NOTE: recipe core-image-minimal-1.0-r0: task do_rootfs: Started
ERROR: core-image-minimal-1.0-r0 do_rootfs: Error executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:license_create_manifest(d)
0003:
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/classes/license.bbclass', lineno: 48, function: license_create_manifest
0044: pkg_dic = {}
0045: for pkg in sorted(image_list_installed_packages(d)):
0046: pkg_info = os.path.join(d.getVar('PKGDATA_DIR', True),
0047: 'runtime-reverse', pkg)
*** 0048: pkg_name = os.path.basename(os.readlink(pkg_info))
0049:
0050: pkg_dic[pkg_name] = oe.packagedata.read_pkgdatafile(pkg_info)
0051: if not "LICENSE" in pkg_dic[pkg_name].keys():
0052: pkg_lic_name = "LICENSE_" + pkg_name
Exception: FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/sysroots/qemux86-64/pkgdata/runtime-reverse/kernel-4.8.3-yocto-standard'
Paul Eggleton [Mon, 31 Oct 2016 03:59:49 +0000 (16:59 +1300)]
devtool: add "rename" subcommand
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 31 Oct 2016 03:59:48 +0000 (16:59 +1300)]
oe-selftest: devtool: fix error message in _test_recipe_contents()
If a variable is being set in the recipe when we've explicitly passed
None as the value to _test_recipe_contents() indicating that it
shouldn't be set at all, then we should be printing out the variable
name in the assertion message but it seems like I forgot to do a
substitution. Also include the value for informational purposes.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 31 Oct 2016 03:59:47 +0000 (16:59 +1300)]
recipetool: create: separate LICENSE items with & by default
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 31 Oct 2016 03:59:46 +0000 (16:59 +1300)]
devtool: finish: warn if moving recipe to unconfigured destination layer
If you run devtool finish to move a recipe created in the workspace by
devtool add or devtool upgrade to a layer, and that layer is not
currently included in bblayers.conf (perhaps unintentionally), then the
recipe will no longer be visible to bitbake. In this scenario, show a
warning so that the user isn't surprised by the recipe "going missing".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 31 Oct 2016 03:59:45 +0000 (16:59 +1300)]
devtool: finish: fix error if destination layer is not in bblayers.conf
If devtool finish is run on a recipe where the recipe file itself is in
the workspace (e.g. where devtool add / devtool upgrade has been used)
and the specified destination layer is not in bblayers.conf, then we
need to avoid running bitbake -c clean at the end because the recipe has
been moved, but the bbappend is still present in the workspace layer at
that point and so if we do it will fail due to the dangling bbappend.
It's difficult to do the clean at the point we'd want to because tinfoil
is holding bitbake.lock for most of the time, but in any case cleaning
the recipe is less important than it used to be since we started
managing the sysroot contents more strictly, so just disable cleaning
under these circumstances to avoid the problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 31 Oct 2016 03:59:44 +0000 (16:59 +1300)]
devtool: add: show recipetool create output
When running devtool add, instead of hiding the recipetool create
output, change it so that it's appropriate to show in the devtool
context and show it in real-time. This means that you get status output
such as when a URL is being fetched (though currently no progress
information.) recipetool create now has a hidden --devtool option to
enable this display mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Wed, 2 Nov 2016 22:57:03 +0000 (15:57 -0700)]
gdb: update 7.11+git1a982b689c -> 7.11.1
41d8236 Set GDB version number to 7.11.1. 136613e Fix PR gdb/19828: gdb -p <process from a container>: internal error a0de87e Make gdb/linux-nat.c consider a waitstatus pending on the infrun side cf2cd51 Add mi-threads-interrupt.exp test (PR 20039) f0a8d0d Fix double prompt output after run control MI commands with mi-async on (PR 20045) b5f0db4 Fix -exec-run not running asynchronously with mi-async on (PR gdb/18077) 7f8e34d Use target_terminal_ours_for_output in MI
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
