Sriram R [Tue, 15 Oct 2024 17:14:16 +0000 (20:14 +0300)]
wifi: ath12k: modify link arvif creation and removal for MLO
Currently ath12k_mac_op_assign_vif_chanctx() uses ahvif->deflink to create and
start vdev based on incoming channel context. With MLO multiple links could be
associated to the ahvif. Use link id from link_conf passed by mac80211 and do
vdev create start for intended link of ahvif.
Add ath12k_mac_assign_link_vif() helper to allocate and initialize link arvif
object based on input link_id. The first link arvif that is being created in
an ahvif will use preallocated ahvif->deflink object and the rest gets
allocated.
Currently link arvif can be removed in two call backs namely
ath12k_mac_op_remove_interface() and ath12k_mac_op_unassign_vif_chanctx():
* ath12k_mac_op_unassign_vif_chanctx() carries link_info so
obtain link_id from link_info and handle removal for that
link
* ath12k_mac_op_remove_interface() is done at interface/MLD
level hence loop through the active link arvifs and remove
all of them
Add ath12k_mac_unassign_link_vif() helper to reset/destroy the link arvifs
allocated for an ahvif.
For scan request from mac80211, check if the any of the link arvifs of the
ahvif is already created on the radio in which scan is requested and use it. If
not use deflink(link 0) for creating scan arvif.
Also ath12k creates vdev during assign_vif_chanctx() mac80211 op callback as it
knows channel associated with given link only in this callback. Whereas
mac80211 updates addition/deletion of links to an ML vif via
.change_vif_links() callback and this is done before channel assignment. Hence
register an dummy ath12k_mac_op_change_vif_links() function to
change_vif_links() and acknowledge mac80211s link updates.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-12-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Sriram R [Tue, 15 Oct 2024 17:14:15 +0000 (20:14 +0300)]
wifi: ath12k: update ath12k_mac_op_update_vif_offload() for MLO
Currently ath12k_mac_op_update_vif_offload() updates for vif encapsulation and
decapsulation offload configurations for intended vif's deflink.
But for an ML vif encapapsulation and decapsulation offloads are an MLD level
configuration so apply the same configuration for all affiliated links of the
ML vif.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-11-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-10-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
wifi: ath12k: modify ath12k_mac_op_set_key() for MLO
Currently ath12k_mac_op_set_key() uses ahvif's deflink to set/cache keys
depending upon the availability of corresponding vdev. But with MLO the
incoming vif could have multiple links affiliated to it, hence use the link id
provided in the key info argument and apply/cache the key to the corresponding
link arvif. When the set key is a pairwise key intended for an ML station then
set the same key on all the affiliated link stations.
Also there could be multiple keys associates to a single link: group keys,
mgmt/beacon protection keys and so on. Current key caching design lacks support
for caching multiple keys for a given link cache. Add support to store a list
of all link keys in the ahvifs link cache as well as update, flush and free the
same whenever required.
Sriram R [Tue, 15 Oct 2024 17:14:12 +0000 (20:14 +0300)]
wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO
Currently bss_info_changed callback (which is registered with
ath12k_mac_op_bss_info_changed()) is used to inform vif (struct ieee80211_vif) and bss
(struct ieee80211_bss_conf) level configuration changes to driver.
With MLO, vif level config as well each link config changes inside vif needs to
be updated and mac80211 uses vif_cfg_changed() and link_info_changed() callback
ops for the same, this is also backward compatible where mac80211 will update
default link conf changes in case VIF is non-MLO.
Rename ath12k_mac_op_bss_info_changed() to ath12k_mac_op_link_info_changed()
and register the same to link_info_changed callback. Register
ath12k_mac_op_vif_cfg_changed() to vif_cfg_changed() callback and handle all
vif level configuration changes there.
Also, currently ath12k_mac_op_bss_info_changed() uses deflink to apply the
config or to cache the config based on the availability of corresponding vdev.
With MLO multiple links can be affiliated to a vif/BSS, so use the link id
provided by mac80211 to fetch the corresponding link to which the bss change
was intended.
For non-MLO link id 0 will be provided by mac80211 and deflink (which is mapped
to ahvif->links[0]) will be used.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
wifi: ath12k: modify ath12k_get_arvif_iter() for MLO
Currently ath12k_get_arvif_iter() takes input ahvif's deflink to check if it
matches with given radio (ar) but in case MLO there could be multiple links
affiliated with ahvif, hence iterate through the links of the ahvif and find
the right arvif that belongs to the given radio.
wifi: ath12k: modify ath12k_mac_vif_chan() for MLO
With MLO, multiple links can be affiliated to a vif (struct ieee80211_vif) and
hence ath12k_mac_vif_chan() needs to know the link id to fetch the channel
context among the links. Rename ath12k_mac_vif_chan() to
ath12k_mac_vif_link_chan() and introduce link id argument to fetch the channel
context from the link bss corresponding to the link id.
For non-MLO vif, link 0's (i.e. deflink) channel context will be returned.
Currently vif configuration cache pointers are placed in arvif and caching is
done whenever a link vif configuration is received before driver created vdev
for it (i.e. before channel is assigned), this is possible because current code
only uses default link (ahvif->deflink) which is preallocated.
With MLO changes the ieee80211_vif drv priv is now ahvif and its arvifs (struct
ath12k_link_vif) other than deflink can be allocated dynamically during channel
assignment. Hence maintain link level cache in ahvif and whenever channel is
assigned for link vif and vdev is created, flush the corresponding link vif
cache from ahvif.
Current code uses cache of ATH12K_DEFAULT_LINK_ID (0) which is the cache of
ahvif->deflink.
Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-5-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Sriram R [Tue, 15 Oct 2024 17:14:08 +0000 (20:14 +0300)]
wifi: ath12k: prepare sta data structure for MLO handling
To prepare the driver for MLO support, split the driver sta data structure to
scale for multiple links. This requires changing the use of arsta to per link
and not per hw which can now comprise of multiple links. Also since most
configurations from mac80211 are done per link, do refactoring of the driver
functions to apply these configurations at link level.
Split struct ath12k_sta, which is the driver private of struct ieee80211_sta,
to store link specific information as struct ath12k_link_sta. For default use
cases struct ath12k_sta will have a preallocated link sta called deflink which
will be used by non ML STAs and the first link sta of ML STA.
With MLO support to be added, remaining link stas will allocated during state
change where new STA is added. These link stas will be freed when STA is
deleted.
Current ath12k_sta(arsta) structure:
+-----------------+ +----------------+
| | | |
| ieee80211_sta | | ieee80211_sta |
| private data | | private data |
| | | |
| ath12k_sta | | ath12k_sta |
| (arsta) | | (arsta) |
|+---------------+| | +-------------+|
|| *arvif (link || | |*arvif (link ||
|| vif of an ar || | | vif of an ar||
|| say 5GHz) || | | say 6GHz) ||
|+---------------+| | +-------------+|
+-----------------+ +----------------+
New struct ath12k_sta (ahsta) containing ath12k_link_sta(s) (arsta) (deflink is
preallocated member which is always the first link if ieee80211_sta is ML STA
and is the only link sta otherwise):
2. struct ath12k_sta, now called by variable name arsta, stores multiple
arstas (struct ah12k_link_sta) and also has a back pointer to struct
ath12k_sta.
3. Pass struct ath12k_link_sta to mac functions that passed struct
ieee80211_sta argument and fetch struct ath12k_sta (ahsta) and struct
ieee80211_sta(sta) internally. This is done to avoid passing link id in all
the functions and performing validation across these functions. Rather the
validation and sta to arsta conversion can be done only at the mac80211 ops.
4. In this patchset, only ahsta->deflink is used to be on par with the
existing code. When MLO support is added the link id will be used to fetch the
arsta.
5. Change ath12k_sta_to_arsta() to ath12k_vif_to_ahsta() to fetch the
ML level sta. The link sta can be fetched from ahsta->link[], or the
deflink can be accessed via ahsta->deflink. API to access link
sta (arsta) by passing link_id can be introduced with MLO Support.
6. The ieee80211_sta can be accessed from ahsta using ath12k_ahsta_to_sta()
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Sriram R [Tue, 15 Oct 2024 17:14:07 +0000 (20:14 +0300)]
wifi: ath12k: pass ath12k_link_vif instead of vif/ahvif
Currently ieee80211_vif/ahvif is passed as argument for all vif related control
path functions that are being called from mac80211 ops. With MLO support being
added multiple link vifs can be part of an ieee80211_vif/ahvif and all these
functions will need link id along with ieee80211_vif/ahvif to be passed to
fetch the corresponding link vif (arvif) to which the control/config applies.
Also all these functions need to validate the locking dependency before
dereferencing and start using the link vifs.
To avoid these redundant link dereferences and validations, limit
ieee80211_vif/ahvif argument to mac80211 ops unless otherwise really required.
Do link vif dereference only in mac80211 ops. Replace vif arg with
ath12k_link_vif and internally fetch ath12k_vif (ahvif) and vif (ieee80211_vif)
if required on other functions.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Sriram R [Tue, 15 Oct 2024 17:14:06 +0000 (20:14 +0300)]
wifi: ath12k: prepare vif data structure for MLO handling
To prepare the driver for MLO support, split the driver vif data structure to
scale for multiple links. This requires changing the use of arvif to per link
and not per hw which can now comprise of multiple links. Also since most
configurations from mac80211 are done per link, do refactoring of the driver
functions to apply these configurations at link level.
Split ath12k_vif which is the driver private of ieee80211_vif to store link
specific information as ath12k_link_vif. For default use cases the ath12k vif
will have a preallocated link vif called deflink which will be used by non ML
and the first link vif of ML vif.
With MLO support to be added, remaining link vifs will be allocated during
channel assignment where vdev create/start happens. These link vifs will be
freed during interface down.
The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is
preallocated member which is always the first link if ieee80211_vif is MLD and
is the only link otherwise):
To refactor existing ath12k_vif to make use of link vifs, following
changes are made:
1. ath12k_vif now called by variable name ahvif storing multiple
arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif.
2. In this patch set, only deflink is used to be on par with the
existing code. When MLO support is added the link id will be used to fetch
the arvif.
3. For mac80211 ops which doesn't use specific link_id, the config or info
is common for the vif, hence apply the config to all link vifs.
The links_map in the ahvif, will be used to identify all the link vifs that
are setup.
4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the
hw level vif. The link vif can be fetched from ahvif->link[], or the
deflink can be accessed via ahvif->deflink. API to access link
vif (arvif) by passing link_id can be introduced with MLO Support.
5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif().
The locking continues to use wiphy_lock() for protecting access to most data in
struct ath12k&co, there are no changes in that regard. Though struct
ath12k_vif::link[] is protected with RCU.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Add support to request BE OFDMA pdev rate stats from firmware
through HTT stats type 51. These stats give information such
as number of spatial streams, bandwidth, MCS, etc.
Note: WCN7850 firmware version -
WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
does not support HTT stats type 51.
Sidhanta Sahu [Mon, 14 Oct 2024 07:06:09 +0000 (12:36 +0530)]
wifi: ath12k: Support Pdev Scheduled Algorithm Stats
Add support to request scheduled algorithm stats from firmware
through HTT stats type 49. These stats give information such
as count of DLOFDMA enabled, disabled, probed and monitored
based on rate and latency, consecutive number of MPDUs tried
and succeeded, etc.
Note: WCN7850 firmware version -
WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
does not support HTT stats type 49.
Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241014070610.3982173-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Rajat Soni [Mon, 14 Oct 2024 06:52:59 +0000 (12:22 +0530)]
wifi: ath12k: Support DMAC Reset Stats
Add support to request DMAC reset stats from firmware through HTT stats
type 45. These stats give debug SoC error stats such as reset count, reset
time, engage time and count, disengage time and count and destination
ring mask.
wifi: ath12k: Add firmware coredump collection support
In case of firmware assert snapshot of firmware memory is essential for
debugging. Add firmware coredump collection support for PCI bus.
Collect RDDM and firmware paging dumps from MHI and pack them in TLV
format and also pack various memory shared during QMI phase in separate
TLVs. Add necessary header and share the dumps to user space using dev
coredump framework. Coredump collection is disabled by default and can
be enabled using menuconfig. Dump collected for a radio is 55 MB
approximately.
Kalle Valo [Fri, 11 Oct 2024 17:33:23 +0000 (20:33 +0300)]
wifi: ath12k: add missing lockdep_assert_wiphy() for ath12k_mac_op_ functions
Use lockdep_assert_wiphy() to document the ath12k_mac_op_ functions which are
called under wiphy_lock(). And make sure that the functions which already have
that is in the beginning of the function.
Kang Yang [Tue, 8 Oct 2024 02:22:46 +0000 (10:22 +0800)]
wifi: ath10k: avoid NULL pointer error during sdio remove
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in ath10k_core_destroy(). This function will free
struct cfg80211_registered_device *rdev and all its members, including
wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio
workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON.
After device release, destroy_workqueue() will use NULL pointer then the
kernel panic happen.
Need to call destroy_workqueue() before ath10k_core_destroy(), free
the work queue buffer first and then free pointer of work queue by
ath10k_core_destroy(). This order matches the error path order in
ath10k_sdio_probe().
No work will be queued on sdio workqueue between it is destroyed and
ath10k_core_destroy() is called. Based on the call_stack above, the
reason is:
Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and
ath10k_sdio_irq_disable() will queue work on sdio workqueue.
Sleep timer will be deleted before ath10k_core_destroy() in
ath10k_hif_power_down().
ath10k_sdio_irq_disable() only be called in ath10k_hif_stop().
ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif
bus, so ath10k_sdio_hif_tx_sg() won't be called anymore.
Kalle Valo [Mon, 7 Oct 2024 16:59:32 +0000 (19:59 +0300)]
wifi: ath12k: ath12k_mac_op_sta_state(): clean up update_wk cancellation
Now that we have switched to using wiphy_lock() there's no need to have
update_wk cancel call separately, for consistency move it to the rest of code
handling IEEE80211_STA_NONE state.
In ath12k_mac_set_key() removing the exit label was a bit more complex so do
it in a separate patch. Remove the else branch and remove now the unnecessary
ret initialisation.
Kalle Valo [Mon, 7 Oct 2024 16:59:29 +0000 (19:59 +0300)]
wifi: ath12k: switch to using wiphy_lock() and remove ar->conf_mutex
Switch from using driver specific ar->conf_mutex to wiphy->mtx. The benefits are:
* one lock less and simplified locking
* possibility to use wiphy_work_queue() without other locks
Most of the mac80211 ops are called within wiphy_lock(), most notable exception
being tx op. This can be checked with lockdep_assert_wiphy() from
net/mac80211/driver-ops.[ch] and I veried that by manually going through all
the ops in ath12k_ops which had lockdep_assert_wiphy().
The conversion was simple:
* All conf_mutex lock() and unlock() calls which
already were called under wiphy_lock() I replaced with
lockdep_assert_wiphy().
* The rest of conf_mutex calls I replaced with wiphy_lock() and wiphy_unlock().
* All lockdep_asset_held(conf_mutex) calls I replaced with
lockdep_assert_wiphy().
One exception was in ath12k_core_post_reconfigure_recovery() where the wiphy
lock needs to be taken before hw_mutex to avoid a lockdep warning.
Kalle Valo [Mon, 7 Oct 2024 16:59:28 +0000 (19:59 +0300)]
wifi: ath12k: convert struct ath12k_sta::update_wk to use struct wiphy_work
For preparation to switch ath12k to use wiphy_lock() we can convert
ath12k_sta_rc_update_wk() to use wiphy_work_queue() for consistency. To avoid
any deadlocks do the struct ath12k_sta::update_wk conversion before switching
to using wiphy_lock() throughout the driver.
Kalle Valo [Mon, 7 Oct 2024 16:59:27 +0000 (19:59 +0300)]
wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()
When I try to manually set bitrates:
iw wlan0 set bitrates legacy-2.4 1
I get sleeping from invalid context error, see below. Fix that by switching to
use recently introduced ieee80211_iterate_stations_mtx().
Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware
even supports bitrate WMI commands and should we consider disabling
ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch.
Add support to request pdev OBSS stats from firmware through stats
type 23. These stats give information about PPDUs transmitted or
tried to be transmitted in Spatial Reuse Groups(SRG), Parameterized
Spatial Reuse(PSR) and non-PSR groups.
Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005104206.3327143-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Add support to request CCA stats for physical devices from firmware
through HTT stats type 19. These stats give information about
channel number, number of records, counters' bitmap, collection
interval and different CCA counters.
Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
wifi: ath12k: Support pdev Transmit Multi-user stats
Add support to request multi-user stats from firmware for transmitter
through HTT stats type 17. These stats give information about multi-
user MIMO, OFDMA and MPDU for different Wi-Fi standards.
Note: MCC firmware version -
WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not
print stats because MCC firmware reports an event, but there are no
tags or data. The length of the received TLV is 0.
Add support to request ring and SFM stats from firmware through HTT stats
type 15 and 16 respectively. These stats give information such as ring
size, ring address, valid number of words in ring, etc., for stats type 15
and SFM buffer information, number of users, words used by users, etc.,
for stat type 16.
Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
wifi: ath12k: Support Self-Generated Transmit stats
Add support to request transmit selfgen stats from firmware through HTT stats
type 12. These stats give information about single user NDP packets, multi-
user MIMO NDP packets, OFDMA triggers, etc.
wifi: ath11k: Fix CE offset address calculation for WCN6750 in SSR
Currently, mem_ce and mem iomem addresses are used to calculate the
CE offset address. mem_ce is initialized with mem address, and for
targets where ce_remap is needed, mem_ce is remapped to a new address
space during AHB probe.
For targets such as WCN6750 in which CE address space is same as WCSS
address space (i.e. "ce_remap" hw_param is set to false), mem_ce and
mem iomem addresses are same. In the initial SRNG setup for such targets,
the CE offset address and hence CE register base addresses are
calculated correctly in ath11k_hal_srng_init() as both mem and mem_ce
are initialized with same iomem address.
Later, after the firmware download, mem is initialized with BAR address
received in qmi_wlanfw_device_info_resp_msg_v01 QMI message, while mem_ce
is not updated.
After initial setup success, during Subsystem Restart (SSR), as part
of reinitialization, ath11k_hal_srng_init() will be called again,
and CE offset address will be calculated incorrectly this time as mem_ce
address was not updated. Due to the incorrect CE offset address,
APPS accesses an invalid CE register address which leads to improper
behavior in firmware after SSR is triggered.
To fix the above issue, update mem_ce to mem iomem address in
ath11k_qmi_request_device_info() for targets which do not support
ce_remap feature.
Arnd Bergmann [Fri, 4 Oct 2024 09:54:13 +0000 (09:54 +0000)]
wifi: ath12k: fix one more memcpy size error
A previous patch addressed a fortified-memcpy warning on older compilers,
but there is still a warning on gcc-14 in some configurations:
In file included from include/linux/string.h:390,
from drivers/net/wireless/ath/ath12k/wow.c:7:
drivers/net/wireless/ath/ath12k/wow.c: In function 'ath12k_wow_convert_8023_to_80211.isra':
include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551610 or more bytes at offsets 0 and 0 overlaps 9223372036854775797 bytes at offset -9223372036854775803 [-Werror=restrict]
include/linux/fortify-string.h:679:26: note: in expansion of macro '__fortify_memcpy_chk'
679 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath12k/wow.c:199:25: note: in expansion of macro 'memcpy'
199 | memcpy(pat + a3_ofs - pkt_ofs,
| ^~~~~~
Address this the same way as the other two, using size_add().
Fixes: b49991d83bba ("wifi: ath12k: fix build vs old compiler") Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004095420.637091-1-arnd@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
wifi: ath12k: Modify print_array_to_buf() to support arrays with 1-based semantics
The API print_array_to_buf() currently supports printing
arrays with 0 indexing. In some cases, a few arrays need
to be printed with 1-based indexing, i.e., array should be
printed, starting with 1.
Add a new version of print_array_to_buf(), named
print_array_to_buf_index(), which implements the functionality
of print_array_to_index(), but with an extra variable, pointing
to the index starting with which the array should be printed.
Modify print_array_to_buf() to call
print_array_to_buf_index() with 0 as the starting index.
wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup()
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery
scenarios") added the change to decrement the pending packets count
in case of recovery which make sense as ah->hw as well all
ar's in it are intact during recovery, but during core deinit there
is no use in decrementing packets count or waking up the empty waitq
as the module is going to be removed also ar's from pending skb's
can't be used and the packets should just be released back.
To fix this, avoid accessing ar from skb->cb when driver is being
unregistered.
Fixes: 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241001092652.3134334-1-quic_ramess@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240905042851.2282306-1-quic_rgnanase@quicinc.com
Nicolas Escande [Fri, 30 Aug 2024 08:19:42 +0000 (10:19 +0200)]
wifi: ath12k: move txbaddr/rxbaddr into struct ath12k_dp
Those two fields are used to store the per SPT page of tx/rx descriptors send to
the firmware for cookie conversion. Right now they are in struct ath12k_spt_info
which means they are duplicated PPT page times while we only need one instance
of them. This works for now as we always use the first spt_info as a global
storage for all PPT pages.
Let's move them into struct ath12k_dp where they belong, alongside of the
spt_info array they are tied to, to avoid waisting a good bit of memory.
On SC7280 platforms which are running with TrustZone, it is not
necessary to manually map the memory regions used by the wifi hardware.
However, ath11k will currently fail to load unless both memory regions
are specified.
This breaks wifi on the rb3gen2 which only specifies the firmware memory
region and does not use the CE region.
Adjust the order of operations in ath11k_ahb_fw_resources_init() to
check for the wifi-firmware subnode before attempting to parse the
memory regions.
Miaoqing Pan [Thu, 29 Aug 2024 07:52:53 +0000 (15:52 +0800)]
wifi: ath11k: fix the stack frame size warning in ath11k_vif_wow_set_wakeups
Fix the following W=1 kernel build warning:
drivers/net/wireless/ath/ath11k/wow.c: In function ‘ath11k_vif_wow_set_wakeups’:
drivers/net/wireless/ath/ath11k/wow.c:461:1: warning: the frame size of 1352 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Remove the nonessential variable 'struct cfg80211_pkt_pattern
old_pattern' by relocating bitmask to bytemask conversion into
ath11k_wow_convert_8023_to_80211().
wifi: ath11k: enable fw_wmi_diag_event hw param for WCN6750
WCN6750 firmware sends the log messages via WMI_DIAG_EVENTID only
when the host driver enables the same via QMI_WLANFW_WLAN_INI_REQ_V01
QMI message. This is further controlled via fw_wmi_diag_event.
Hence set this flag to true for the firmware to send the logs.
These logs are further collected in the user space through
the trace infrastructure.
wifi: ath11k: Fix double free issue during SRNG deinit
Currently struct ath11k_hal::srng_config pointer is not assigned
to NULL after freeing the memory in ath11k_hal_srng_deinit().
This could lead to double free issue in a scenario where
ath11k_hal_srng_deinit() is invoked back to back.
In the current code, although the chances are very low, the above
said scenario could happen when hardware recovery has failed and
then there is another FW assert where ath11k_hal_srng_deinit() is
invoked once again as part of recovery.
Fix this by assigning the struct ath11k_hal::srng_config pointer
to NULL after freeing the memory.
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240826053326.8878-1-quic_bpothuno@quicinc.com
Miaoqing Pan [Fri, 30 Aug 2024 01:56:49 +0000 (09:56 +0800)]
wifi: ath10k: fix the stack frame size warning in ath10k_hw_scan
Fix the following W=1 kernel build warning:
drivers/net/wireless/ath/ath10k/mac.c: In function ‘ath10k_hw_scan’:
drivers/net/wireless/ath/ath10k/mac.c:6468:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Miaoqing Pan [Fri, 30 Aug 2024 01:53:49 +0000 (09:53 +0800)]
wifi: ath10k: fix the stack frame size warning in ath10k_remain_on_channel
Fix the following W=1 kernel build warning:
drivers/net/wireless/ath/ath10k/mac.c: In function ‘ath10k_remain_on_channel’:
drivers/net/wireless/ath/ath10k/mac.c:7980:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]
wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss2
In supported_vht_mcs_rate_nss2, the rate for MCS9 & VHT20 is defined as
{1560, 1733}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 1730 100kbps nss 2 mcs 9
and:
invalid vht params rate 1920 100kbps nss 2 mcs 9
Change it to {1730, 1920} to align with firmware to fix the issue.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss1
In supported_vht_mcs_rate_nss1, the rate for MCS9 & VHT20 is defined as
{780, 867}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 960 100kbps nss 1 mcs 9
Change it to {865, 960} to align with firmware, so this issue could be
fixed.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240711020344.98040-2-quic_bqiang@quicinc.com
Andrew Kreimer [Wed, 18 Sep 2024 17:10:03 +0000 (20:10 +0300)]
wifi: ath6kl: fix typos in struct wmi_rssi_threshold_params_cmd and wmi_snr_threshold_params_cmd comments
Fix typos in comments.
Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240913094818.14456-1-algonell@gmail.com
Andrew Kreimer [Wed, 18 Sep 2024 17:10:03 +0000 (20:10 +0300)]
wifi: wcn36xx: fix a typo in struct wcn36xx_sta documentation
Fix a typo in comments.
Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240913094319.13718-1-algonell@gmail.com
Completely unused here in favor of Device Tree based setup. The DT code
in here should currently match what is available with platform files.
Any such lapse can always be added.
There are no more board files defining platform data for this driver and
eeprom support through NVMEM has already been implemented. No need to
keep this old functionality around.
Jeongjun Park [Sat, 14 Sep 2024 09:06:03 +0000 (12:06 +0300)]
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240909103855.68006-1-aha310510@gmail.com
net: ethtool: phy: Don't set the context dev pointer for unfiltered DUMP
The context info allows continuing DUMP requests, shall they fill the
netlink buffer.
In the case of filtered DUMP requests, a reference on the netdev is
grabbed in the .start() callback and release in .done().
Unfiltered DUMP request don't need the dev pointer to be set in the context
info, doing so will trigger an unwanted netdev_put() in .done().
Reported-by: syzbot+e9ed4e4368d450c8f9db@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d3bf150621d361a7@google.com/ Fixes: 17194be4c8e1 ("net: ethtool: Introduce a command to list PHYs on an interface") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20240913100515.167341-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Gaosheng Cui [Thu, 12 Sep 2024 01:19:49 +0000 (09:19 +0800)]
MIPS: Remove the obsoleted code for include/linux/mv643xx.h
Most of the drivers which used this header have been deleted, most
of these code is obsoleted, move the only defines that are actually
used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the
file completely.
Jakub Kicinski [Sat, 14 Sep 2024 04:17:14 +0000 (21:17 -0700)]
Merge branch 'enic-report-per-queue-stats'
Nelson Escobar says:
====================
enic: Report per queue stats
Patch #1: Use a macro instead of static const variables for array sizes. I
didn't want to add more static const variables in the next patch
so clean up the existing ones first.
Patch #2: Collect per queue statistics
Patch #3: Report per queue stats in netdev qstats
Patch #4: Report some per queue stats in ethtool
# NETIF="eno6" tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..5
ok 1 stats.check_pause # XFAIL pause not supported by the device
ok 2 stats.check_fec # XFAIL FEC not supported by the device
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
====================
net: fib_rules: Add DSCP selector support
Currently, the kernel rejects IPv4 FIB rules that try to match on the
upper three DSCP bits:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
The reason for that is that historically users of the FIB lookup API
only populated the lower three DSCP bits in the TOS field of the IPv4
flow key ('flowi4_tos'), which fits the TOS definition from the initial
IPv4 specification (RFC 791).
This is not very useful nowadays and instead some users want to be able
to match on the six bits DSCP field, which replaced the TOS and IP
precedence fields over 25 years ago (RFC 2474). In addition, the current
behavior differs between IPv4 and IPv6 which does allow users to match
on the entire DSCP field using the TOS selector.
Recent patchsets made sure that callers of the FIB lookup API now
populate the entire DSCP field in the IPv4 flow key. Therefore, it is
now possible to extend FIB rules to match on DSCP.
This is done by adding a new DSCP attribute which is implemented for
both IPv4 and IPv6 to provide user space programs a consistent behavior
between both address families.
The behavior of the old TOS selector is unchanged and IPv4 FIB rules
using it will only match on the lower three DSCP bits. The kernel will
reject rules that try to use both selectors.
Patch #1 adds the new DSCP attribute but rejects its usage.
Patches #2-#3 implement IPv4 and IPv6 support.
Patch #4 allows user space to use the new attribute.
Test that locally generated traffic from a socket that specifies a DS
Field using the IP_TOS / IPV6_TCLASS socket options is correctly
redirected using a FIB rule that matches on DSCP. Add negative tests to
verify that the rule is not it when it should not. Test with both IPv4
and IPv6 and with both TCP and UDP sockets.
Now that both IPv4 and IPv6 support the new DSCP selector, enable user
space to configure FIB rules that make use of it by changing the policy
of the new DSCP attribute so that it accepts values in the range of [0,
63].
Use NLA_U8 rather than NLA_UINT as the field is of fixed size.
Implement support for the new DSCP selector that allows IPv6 FIB rules
to match on the entire DSCP field. This is done despite the fact that
the above can be achieved using the existing TOS selector, so that user
space program will be able to work with IPv4 and IPv6 rules in the same
way.
Differentiate between both selectors by adding a new bit in the IPv6 FIB
rule structure that is only set when the 'FRA_DSCP' attribute is
specified by user space. Reject rules that use both selectors.
Implement support for the new DSCP selector that allows IPv4 FIB rules
to match on the entire DSCP field, unlike the existing TOS selector that
only matches on the three lower DSCP bits.
Differentiate between both selectors by adding a new bit in the IPv4 FIB
rule structure (in an existing one byte hole) that is only set when the
'FRA_DSCP' attribute is specified by user space. Reject rules that use
both selectors.
The FIB rule TOS selector is implemented differently between IPv4 and
IPv6. In IPv4 it is used to match on the three "Type of Services" bits
specified in RFC 791, while in IPv6 is it is used to match on the six
DSCP bits specified in RFC 2474.
Add a new FIB rule attribute to allow matching on DSCP. The attribute
will be used to implement a 'dscp' selector in ip-rule with a consistent
behavior between IPv4 and IPv6.
For now, set the type of the attribute to 'NLA_REJECT' so that user
space will not be able to configure it. This restriction will be lifted
once both IPv4 and IPv6 support the new attribute.
net: ethtool: Enhance error messages sent to user space
During the firmware flashing process, notifications are sent to user
space to provide progress updates. When an error occurs, an error
message is sent to indicate what went wrong.
In some cases, appropriate error messages are missing.
Add relevant error messages where applicable, allowing user space to better
understand the issues encountered.
The enetc driver uses ifdefs when checking whether
CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works
if the driver is built-in but fails if the driver is available as a
kernel module. Replace the instances of ifdef with use of the IS_ENABLED
macro, that will evaluate as true when this feature is built as a kernel
module and follows the kernel's coding style.
Qianqiang Liu [Fri, 13 Sep 2024 01:47:32 +0000 (09:47 +0800)]
net: ag71xx: remove dead code path
The "err" is always zero, so the following branch can never be executed:
if (err) {
ndev->stats.rx_dropped++;
kfree_skb(skb);
}
Therefore, the "if" statement can be removed.
Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure
Jakub Kicinski [Sat, 14 Sep 2024 02:50:25 +0000 (19:50 -0700)]
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Mina Almasry [Fri, 13 Sep 2024 06:07:45 +0000 (06:07 +0000)]
memory-provider: disable building dmabuf mp on !CONFIG_PAGE_POOL
When CONFIG_TRACEPOINTS=y but CONFIG_PAGE_POOL=n, we end up with this
build failure that is reported by the 0-day bot:
ld: vmlinux.o: in function `mp_dmabuf_devmem_alloc_netmems':
>> (.text+0xc37286): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: (.text+0xc3729a): undefined reference to `__SCT__tp_func_page_pool_state_hold'
>> ld: vmlinux.o:(__jump_table+0x10c48): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: vmlinux.o:(.static_call_sites+0xb824): undefined reference to `__SCK__tp_func_page_pool_state_hold'
The root cause is that in this configuration, traces are enabled but the
page_pool specific trace_page_pool_state_hold is not registered.
There is no reason to build the dmabuf memory provider when
CONFIG_PAGE_POOL is not present, as it's really a provider to the
page_pool.
In fact the whole NET_DEVMEM is RX path-only at the moment, so we can
make the entire config dependent on the PAGE_POOL.
Note that this may need to be revisited after/while devmem TX is
added, as devmem TX likely does not need CONFIG_PAGE_POOL. For now this
build fix is sufficient.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409131239.ysHQh4Tv-lkp@intel.com/ Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://patch.msgid.link/20240913060746.2574191-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Fri, 13 Sep 2024 09:49:01 +0000 (10:49 +0100)]
Merge branch 'am65-cpsw-rx-mq'
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Add multi queue RX support
am65-cpsw can support up to 8 queues at Rx. So far we have
been using only one queue (i.e. default flow) for all RX traffic.
This series adds multi-queue support. The driver starts with
1 RX queue by default. User can increase the RX queues via ethtool,
e.g. 'ethtool -L ethx rx <N>'
The series also adds regmap and regfield support to some of the
ALE registers. It adds Policer/Classifier registers and fields.
Converting the existing ALE control APIs to regfields can be a separate
exercise.
Some helper functions are added to read/write to the Policer/Classifier
registers and a default Classifier setup function is added that
routes packets based on their PCP/DSCP priority to different RX queues.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Use single macro AM65_CPSW_MAX_QUEUES for both TX and RX queues
to simplify code
- reuse am65_cpsw_get/set_per_queue_coalesce for am65_cpsw_get/set_coalesce.
- return -EINVAL if unsupported tx/rx_coalesce_usecs in
am65_cpsw_set_coalesce.
- reverse Xmas tree declaration order fixes in cpsw_ale
- Link to v3: https://lore.kernel.org/r/20240703-am65-cpsw-multi-rx-v3-0-f11cd860fd72@kernel.org
Changes in v3:
- code style fixes
- squashed patches 5 and 6
- added comment about priority to thread mapping table.
- Added Reviewed-by Simon Horman.
- Link to v2: https://lore.kernel.org/r/20240628-am65-cpsw-multi-rx-v2-0-c399cb77db56@kernel.org
Changes in v2:
- rebase to net/next
- fixed RX stall issue during iperf
- Link to v1: https://lore.kernel.org/r/20240606-am65-cpsw-multi-rx-v1-0-0704b0cb6fdc@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Roger Quadros [Tue, 10 Sep 2024 09:24:02 +0000 (12:24 +0300)]
net: ethernet: ti: cpsw_ale: add policer/classifier helpers and setup defaults
The Policer registers in the ALE register space are just shadow registers
and use an index field in the policer table control register to read/write
to the actual Polier registers.
Add helper functions to Read and Write to Policer registers.
Also add a helper function to set the thread value to classifier/policer
mapping. Any packet that first matches the classifier will be sent to the
thread (flow) that is set in the classifier to thread mapping table.
If not set then it goes to the default flow.
Default behaviour is to have 8 classifiers to map 8 DSCP/PCP
priorities to N receive threads (flows). N depends on number of
RX channels enabled for the port.
As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have
lower priority than the user priority 0 (default). User priority 1 being
of the lowest priority.
[1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks
Table G-2 - Traffic type acronyms
Table G-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Roger Quadros [Tue, 10 Sep 2024 09:23:58 +0000 (12:23 +0300)]
net: ethernet: ti: am65-cpsw: Introduce multi queue Rx
am65-cpsw can support up to 8 queues at Rx.
Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that.
As there is only one DMA channel for RX traffic, the
8 queues come as 8 flows in that channel.
By default, we will start with 1 flow as defined by the
macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS.
User can change the number of flows by ethtool like so
'ethtool -L ethx rx <N>'
All traffic will still come on flow 0. To get traffic on
different flows the Classifiers will need to be set up.
Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Mina Almasry [Fri, 13 Sep 2024 03:28:24 +0000 (03:28 +0000)]
memory-provider: fix compilation issue without SYSFS
When CONFIG_SYSFS is not set, the kernel fails to compile:
net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration]
368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined
as well.
Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not
needed anymore after commit e817f85652c1 ("xdp: generic XDP handling of
xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs.
Jakub Kicinski [Fri, 13 Sep 2024 03:48:33 +0000 (20:48 -0700)]
Merge branch 'mlx5-updates-2024-09-11'
Saeed Mahameed says:
====================
Misc updates to mlx5 driver:
1) Fix HW steering ret value and align with kdoc
2) Flow steering cleanups and add support for no append at software level
3) Support for sync reset using hot reset
4) RX SW counter to cover no-split events in header/data split mode
5) Make affinity of SFs configurable
====================
net/mlx5e: SHAMPO, Add no-split ethtool counters for header/data split
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
projects / thirdparty / kernel / linux.git / log
