Adam Julis [Tue, 19 Mar 2024 11:02:51 +0000 (12:02 +0100)]
virt-admin: Fix segfault when libvirtd dies
vshAdmCatchDisconnect requires non-NULL structure vshControl for
getting connection name (stored at opaque), but
virAdmConnectRegisterCloseCallback at vshAdmConnect called it
with NULL.
Signed-off-by: Adam Julis <ajulis@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Karim Taha [Sun, 17 Mar 2024 15:19:20 +0000 (17:19 +0200)]
openvz_driver: use g_autofree instead of VIR_FREE()
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wei Gong [Mon, 18 Mar 2024 13:31:14 +0000 (21:31 +0800)]
virthreadpool: create threads from the newly expanded workers
when the thread pool is dynamically expanded, threads should
not be created from the existing workers; they should be created
from the newly expanded workers
Signed-off-by: Wei Gong <gongwei833x@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Mon, 11 Mar 2024 16:04:48 +0000 (17:04 +0100)]
qemu: domain: Drop added features from migratable CPU
Features marked with added='yes' in CPU model definitions have to be
removed before migration, otherwise older libvirt would complain about
unknown CPU features. We only do this for features that were enabled for
a given CPU model even with older libvirt, which just ignored the
features. And only for features we added ourselves when updating CPU
definition during domain startup, that is we do not remove features
which were explicitly mentioned by a user.
That said, this is not the safest thing we could do, but it's
effectively the same thing we did before the affected features were
added: we ignored them completely on both sides of migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Tim Wiederhake <twiederh@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jiri Denemark [Thu, 7 Mar 2024 13:50:48 +0000 (14:50 +0100)]
cpu: x86: Add support for adding features to existing CPU models
This is not a good idea in general, but we can (and have to) do it in
specific cases when a feature has always been part of a CPU model in
hypervisor's definition, but we ignored it and did not include the
feature in our definition.
Blindly adding the features to the CPU map and not adding them to
existing CPU models breaks migration between old and new libvirt in both
directions. New libvirt would complain the features got unexpectedly
enabled (as they were not mentioned in the incoming domain XML) even
though they were also enabled on the source and the old libvirt just
didn't know about them. On the other hand, old libvirt would refuse to
accept incoming migration of a domain started by new libvirt because the
domain XML would contain CPU features unknown to the old libvirt.
This is exactly what happened when several vmx-* features were added a
few releases back. Migration between libvirt releases before and after
the addition is now broken.
This patch adds support for added these features to existing CPU models
by marking them with added='yes'. The features will not be considered
part of the CPU model and will be described explicitly via additional
<feature/> elements, but the compatibility check will not complain if
they are enabled by the hypervisor even though they were not explicitly
mentioned in the CPU definition and incoming migration from old libvirt
will succeed.
To fix outgoing migration to old libvirt, we also need to drop all those
features from domain XML unless they were explicitly requested by the
user. This will be handled by a later patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Tim Wiederhake <twiederh@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Wed, 13 Mar 2024 16:25:35 +0000 (17:25 +0100)]
tests: mock __open_2()
As of commit [1] glibc may overwrite a call to open() with call
to __open_2() (if only two arguments are provided and the code is
compiled with clang). But since we are not mocking the latter our
test suite is broken as tests try to access paths outside of our
repo.
1: https://sourceware.org/git/?p=glibc.git;a=commit;h=86889e22db329abac618c6a41f86c84657a15324 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Michal Privoznik [Wed, 13 Mar 2024 16:35:15 +0000 (17:35 +0100)]
virusbmock: Switch to VIR_MOCK_REAL_INIT()
Since virusbmock was written 10 years ago, back when we didn't
have virmock.h and its helpers, it open codes symbol resolution
(VIR_MOCK_REAL_INIT). With a bit of cleanup (e.g. renaming
realopen to real_open and so on) it can use virmock.h provided
macros.
And while at it, drop include of virusb.h - there is no
compelling reason for it include the file. The mock just
redirects paths passed to open()/opendir().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
[...]
OPTIONS
- [--timeout] <number> number of seconds the daemon will run without any active connection
+ --timeout <number> number of seconds the daemon will run without any active connection
Resolves: https://issues.redhat.com/browse/RHEL-25993 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 5 Mar 2024 15:00:41 +0000 (16:00 +0100)]
vsh: Fix broken assumption that required VSH_OT_INT must be positional
In at least one case we've wanted a mandatory argument which requires
the explicit flag. Fix the assumption before converting everything over
to the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 5 Mar 2024 14:07:47 +0000 (15:07 +0100)]
vsh: Annotate 'required' and 'positional' arguments explicitly
Add 'positional' and 'required' fields to vshCmdOptDef, which will
explicitly track the two properties of arguments.
To ensure that we have proper coverage, add checks to
vshCmddefCheckInternals validating the state of the above flags by
infering it from existing data.
This conversion will allow us:
- remove VSH_OT_DATA in favor of VSH_OT_STRING
- use VSH_OT_INT when required both as positional and non-positional
- properly annotate which VSH_OT_ARGV are positional and which are not
(currently inferred by whether an previous positional option exists)
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 1 Mar 2024 13:51:46 +0000 (14:51 +0100)]
vshCmddefHelp: Refactor printing of help (argument description)
Extract flag check to a separate variable and replace ternary operators
by normal conditions and use allocated buffer instead of a static one
to improve readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 1 Mar 2024 13:51:46 +0000 (14:51 +0100)]
vshCmddefHelp: Refactor printing of help (list of arguments)
Extract flag check to a separate variable and replace ternary operators
by normal conditions and directly output the text rather than using
extra variable to improve readability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 1 Mar 2024 22:01:54 +0000 (23:01 +0100)]
vsh: Add '--dump-help' option for 'self-test' command
The new option dumps the full help outputs for every command so that
it's possible to conveniently check that subsequent refactors will not
impact any of the external functionality.
No man page entry is needed as the command is internal/undocumented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 1 Mar 2024 14:02:07 +0000 (15:02 +0100)]
virsh: Remove uncommon redundant descriptions of virsh commands
Some description of virsh commands referenced itself in a multi-line
example of usage, which is pointless as virsh help already shows how to
use the command:
.data = N_("Get or set the current memory parameters for a guest"
" domain.\n"
" To get the memory parameters use following command: \n\n"
" virsh # memtune <domain>")
Change it to just state what the command does and leave the example for
the help printer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 4 Mar 2024 14:51:28 +0000 (15:51 +0100)]
vsh: Always assume that command groups are used
None of the clients use the 'command set' approach and other pieces of
code such as the command validator already assume that command groups
are in use. Remove the unused 'command set' stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
capabilities: Allow suppressing error message from virCapabilitiesDomainSupported()
In a few cases (CH driver) we want
virCapabilitiesDomainSupported() just to check whether given
virtType is supported and report a different error message (that
suggests how to solve the problem). Introduce reportError
argument which makes the function report an error iff set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
capabilities: Allow suppressing error message from virCapabilitiesDomainDataLookup()
In near future we will want to check whether capabilities for
given virtType exist, but report an error on our own. Introduce
reportError argument which makes the function report an error iff
set.
In one specific case (virQEMUCapsGetDefaultVersion()) we were
even overwriting (more specific) error message reportd by
virCapabilitiesDomainDataLookup(). Drop that too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If the host doesn't have /dev/kvm nor /dev/mshv, i.e. CH driver
is unable to run any guests, then an error is reported. But the
usual thing to do here is print an info message into the logs and
return VIR_DRV_STATE_INIT_SKIPPED. It is a recoverable error
after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of previous commit, the CH driver checks for /dev/kvm and/or
/dev/mshv presence. In order to make chxml2xmltest work
regardless of host configuration, introduce a mock that pretends
both of these files are accessible.
Fixes: 51c14df9670ba2f5d193b700f39e6464e1bc18c6 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Abhiram Tilak [Tue, 5 Mar 2024 19:50:13 +0000 (01:20 +0530)]
storage: Upgrade default qcow2 verion to 1.1
Change the default to modern qcow2 as it's supported by all qemu
versions supported by libvirt and in fact 'qemu-img' already defaults to
the new format for a long time.
Some Unittests require changes to pass, now that version 1.1 is default.
Unittests like `qcow2-1.1.argv` may not be relevant anymore, but this
patch doesn't affect them.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/602 Signed-off-by: Abhiram Tilak <atp.exp@gmail.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Cloud-Hypervisor is capable of running VMs with kvm or mshv as the
hypervisor on Linux Host. Guest to hypevisor ABI with mshv hypervisor is
the same as in the case of VIR_DOMAIN_VIRT_HYPERV. So, VIR_DOMAIN_VIRT_HYPERV
type will be reused to represent the config with Linux Host and mshv as the
hypervisor.
While initializing ch driver, check if either of /dev/kvm or /dev/mshv
device is present on the host. Before starting ch domains, check if the
requested hypervisor device is present on the host.
Users can specify hypervisor in ch guests's domain definitions like
below:
<domain type='kvm'>
_or_
<domain type='hyperv'>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ch: Add support for `Unix` mode to serial port dev
With Unix mode, pass a socket path to cloud-hypervisor.
Cloud-Hypervisor will attach guest's serial port to this socket path.
Users can connect to the serial port using one of the following commands:
`socat -,crnl UNIX-CONNECT:<path/to/socket>`
OR
`minicom --device unix#<path/to/socket>`
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ch: Add Cap checks for unix backend of serial port
Unix Socket backend is only supported for serial port in
cloud-hypervisor. Add relevant checks in chValidateDomainDeviceDef.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Tue, 5 Mar 2024 15:16:05 +0000 (16:16 +0100)]
docs: Update documentation of CPU models in domain caps
Using check='none' when starting a domain with a CPU model marked as
usable is no longer needed as libvirt will do the right thing even with
check='partial'.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Tue, 27 Feb 2024 16:16:56 +0000 (17:16 +0100)]
qemu: command: Remove fallback '-usb' handling
Currently all machine types which do honour '-usb' are already covered
by code which will either select a proper controller model or would
select the same one which '-usb' would use.
Thus all of the legacy -usb controller code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Wed, 21 Feb 2024 16:41:01 +0000 (17:41 +0100)]
qemu: command: Don't downgrade to '-usb' for arm based machines
- 'virt*' machines already don't allow downgrade
- 'versatilepb' and 'realview' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb' (some have sysbus-based USB
controller which we don't even consider)
For the 'versatilepb' and 'realview' machines libvirt would already
resort to picking either an existing controller model or trying to pick
the one which '-usb' would select and thus fail either way.
All other machine types ignore it.
We can thus remove the fallback for all arm-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Wed, 21 Feb 2024 16:41:01 +0000 (17:41 +0100)]
qemu: command: Don't downgrade to '-usb' for ppc based machines
- 'pseries' machines already don't allow downgrade
- 'g3beige' and 'mac99' machines use 'pci-ohci' controller with '-usb'
- all other machines ignore '-usb'
For 'g3beige' and 'mac99' libvirt already has 'pci-ohci' as contoller it
would select as one of the options when picking a model, thus it's
impossible to reach situation when '-usb' would be honoured.
All other machine types ignore it.
We can thus remove the fallback for all ppc-based machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Tue, 20 Feb 2024 15:23:32 +0000 (16:23 +0100)]
qemu: command: Don't downgrade to '-usb' with 'pseries' machines
The default USB device auto-selection code for 'pseries' machines picks
controller models which are also selected when '-usb' is used thus it's
impossible to end up in the case when using '-usb' would be possible:
$ qemu-system-ppc64 --machine pseries,usb=on
qemu-system-ppc64: could not find a module for type 'nec-usb-xhci'
$ qemu-system-ppc64 --machine pseries-2.5,usb=on
qemu-system-ppc64: could not find a module for type 'pci-ohci'
Remove the impossible downgrade and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Mon, 19 Feb 2024 14:28:33 +0000 (15:28 +0100)]
qemu: command: Don't downgrade to '-usb' for x86 based machines
- 'q35' machine type already explicitly forbids fallback
- 'isapc' never supported USB and '-usb' is ignored
- 'i440fx' does support '-usb' and translates it into 'piix3-uhci' which
is identical to what libvirt selects
- we currently don't care about 'microvm'
Attempting to start an 'pc' (i440fx) machine with -usb when 'piix3-uhci'
is compiled out will fail and in any other case libvirt will use the
proper explicitly selected controller.
Drop the '-usb' downgrade for x86 arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Tue, 27 Feb 2024 11:52:08 +0000 (12:52 +0100)]
qemuDomainControllerDefPostParse: Use 'pci-ohci' as last-resort fallback USB controller
This controller is used as the default/implicit USB controller by
multiple machine types which honour the '-usb' flag of qemu. Add it as
fallback in libvirt too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Mon, 26 Feb 2024 15:17:41 +0000 (16:17 +0100)]
qemuDomainDefAddDefaultDevices: Populate default USB for 'versatilepb' and 'realview' ARM machines
The machine types historically have a default USB controller populated
via '-usb' which libvirt assumed implicitly. Qemu will use 'pci-ohci'
for both if '-usb' is used.
Unfortunately an USB controller instantiated via '-usb' is unusable as
the bus name libvirt generates doesn't reflect the real name qemu uses,
and thus no libvirt-defined USB devices can be put on the controller.
This patch will populate the default USB controller into the XML and
select it's model to 'pci-ohci' unconditionally as the machine would
fail to start with '-usb' if that controller model is not available.
This patch doesn't try to make any other assumptions about
auto-populated model of USB controllers, which means that for an
explicit USB controller without model a different model will be picked.
Note that this will likely cause ABI differences and break migration for
the two machine types, in the corner case when the default USB
controller would be populated, but given that both are obsolete board
types and USB was unusable it doesn't make sense to keep supporting this
specific case when '-usb' was formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Tue, 20 Feb 2024 13:22:05 +0000 (14:22 +0100)]
qemuxmlconftest: Add test for 'realview' machine
Add test data for a 'realview' machine example to validate default USB
controller selection.
Note that it's unlikely that anyone would run 'realview' machines with
'aarch64' architecture, but qemu allows it and it's simpler test-wise in
libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Jiri Denemark [Fri, 1 Mar 2024 15:56:16 +0000 (16:56 +0100)]
qemu: Optimize CPU check='partial' for usable CPUs
Ideally check='partial' would check exactly the features QEMU would want
to enable when asked for a specific CPU model (and features). But there
is no way we could ask QEMU how a specific CPU would look like. So we
use our definition from CPU map, which may slightly differ as QEMU adds
or removes features from CPU models, and thus we may end up checking
features which QEMU would not enable while missing some required ones.
We can do better in specific cases, though. If a CPU definition uses
only a model and disabled features (or none at all), we already know
whether QEMU can enable all features required by the CPU model as that's
what we use to set usable='yes' attribute in the list of available CPU
models in domain capbilities XML. So when a usable CPU model is
requested without asking for additional features (disabling features is
fine) we can avoid our possible inaccurate check using our CPU map.
For backward compatibility we only consider usable models. If a
specified model is not usable, we still check it the old way and even
let QEMU start it (and disable some features) in case our definition
lacks some features compared to QEMU.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/608 Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jiri Denemark [Thu, 29 Feb 2024 17:28:02 +0000 (18:28 +0100)]
cpu: x86: Check for invalid CPU data from hypervisor
Recently a kernel bug caused QEMU to report a CPU feature as enabled
while listing it in the "unavailable-features" list of features that
were requested, but could not be enabled. The feature was actually
enabled, but we marked it as disabled when starting a domain. Later when
the domain is migrated, the destination requests the feature to be
disabled, which breaks the guest ABI or if we are lucky QEMU just fails
to load the migration stream.
Let's make similar bugs more visible in the future by refusing to even
start the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adam Julis [Tue, 5 Mar 2024 10:43:03 +0000 (11:43 +0100)]
virsh: Fix overflow error of freepages command
Trying to print pages of a size larger than the UINT_MAX of the
given platform (for example, 4G on 64-bit ARM), results in a
system error even though this is a legitimate request.
The vshCommandOptScaledInt() used for parsing the pagesize is
given UINT_MAX as the upper limit. The parsed value is then
divided by 1024 and fed to virNodeGetFreePages() which expects an
unsigned int. We can't change the public API but the upper limit
can be raised by the factor of 1024.
Signed-off-by: Adam Julis <ajulis@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
projects / thirdparty / libvirt.git / log
