Yunsheng Lin [Thu, 22 Sep 2022 12:33:09 +0000 (20:33 +0800)]
RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table()
As hns_roce_init_hem_table() is always called with use_lowmem
being '1', and table->lowmem is set according to that argument,
so remove table->lowmem too.
Also, as the table->lowmem is used to indicate a dma buffer
is allocated with GFP_HIGHUSER or GFP_KERNEL, and calling
dma_alloc_coherent() with GFP_KERNEL seems like a common
pattern.
Bob Pearson [Tue, 13 Sep 2022 22:27:17 +0000 (17:27 -0500)]
RDMA/rxe: Remove redundant num_sge fields
In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge
in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in
rxe_dma_info are actually used by the rxe kernel driver.
The userspace would set these values, but the kernel never read them.
This change has no affect on the current ABI and new or old versions of
rdma-core operate correctly with new or old versions of the kernel rxe
driver.
Jason Gunthorpe [Thu, 1 Sep 2022 14:20:56 +0000 (11:20 -0300)]
RDMA/mlx5: Enable ATS support for MRs and umems
For mlx5 if ATS is enabled in the PCI config then the device will use ATS
requests for only certain DMA operations. This has to be opted in by the
SW side based on the mkey or umem settings.
ATS slows down the PCI performance, so it should only be set in cases when
it is needed. All of these cases revolve around optimizing PCI P2P
transfers and avoiding bad cases where the bus just doesn't work.
Jason Gunthorpe [Thu, 1 Sep 2022 14:20:55 +0000 (11:20 -0300)]
RDMA/mlx5: Add support for dmabuf to devx umem
This is modeled after the similar EFA enablement in commit 66f4817b5712 ("RDMA/efa: Add support for dmabuf memory regions").
Like EFA there is no support for revocation so we simply call the
ib_umem_dmabuf_get_pinned() to obtain a umem instead of the normal
ib_umem_get(). Everything else stays the same.
Jason Gunthorpe [Thu, 1 Sep 2022 14:20:54 +0000 (11:20 -0300)]
RDMA/core: Add UVERBS_ATTR_RAW_FD
This uses the same passing protocol as UVERBS_ATTR_FD (eg len = 0 data_s64
= fd), except that the FD is not required to be a uverbs object and the
core code does not covert the FD to an object handle automatically.
Access to the int fd is provided by uverbs_get_raw_fd().
Bob Pearson [Thu, 25 Aug 2022 22:14:47 +0000 (17:14 -0500)]
RDMA/rxe: Fix resize_finish() in rxe_queue.c
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe08d0 ("RDMA/rxe: Add memory barriers to kernel queues") Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Bob Pearson [Fri, 5 Aug 2022 18:31:54 +0000 (13:31 -0500)]
RDMA/rxe: Set pd early in mr alloc routines
Move setting of pd in mr objects ahead of any possible errors so that it
will always be set in rxe_mr_cleanup() to avoid seg faults when
rxe_put(mr_pd(mr)) is called.
Fixes: cf40367961d8 ("RDMA/rxe: Move mr cleanup code to rxe_mr_cleanup()") Link: https://lore.kernel.org/r/20220805183153.32007-2-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dan Carpenter [Thu, 22 Sep 2022 11:22:35 +0000 (14:22 +0300)]
RDMA/core: Clean up a variable name in ib_create_srq_user()
"&srq->pd->usecnt" and "&pd->usecnt" are different names for the same
reference count. Use "&pd->usecnt" consistently for both the increment
and decrement.
rxe_mr and ib_mr have interchangeable members. Remove device specific
members and use ones in the generic struct. Both 'iova' and 'length' are
filled in ib_uverbs or ib_core layer after MR registration.
IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Mark Zhang [Thu, 8 Sep 2022 10:09:03 +0000 (13:09 +0300)]
RDMA/cm: Use DLID from inbound/outbound PathRecords as the datapath DLID
In inter-subnet cases, when inbound/outbound PRs are available,
outbound_PR.dlid is used as the requestor's datapath DLID and
inbound_PR.dlid is used as the responder's DLID. The inbound_PR.dlid
is passed to responder side with the "ConnectReq.Primary_Local_Port_LID"
field. With this solution the PERMISSIVE_LID is no longer used in
Primary Local LID field.
Mark Zhang [Thu, 8 Sep 2022 10:09:02 +0000 (13:09 +0300)]
RDMA/cm: Use SLID in the work completion as the DLID in responder side
The responder should always use WC's SLID as the dlid, to follow the
IB SPEC section "13.5.4.2 COMMON RESPONSE ACTIONS":
A responder always takes the following actions in constructing a
response packet:
- The SLID of the received packet is used as the DLID in the response
packet.
Mark Zhang [Thu, 8 Sep 2022 10:09:01 +0000 (13:09 +0300)]
RDMA/cma: Multiple path records support with netlink channel
Support receiving inbound and outbound IB path records (along with GMP
PathRecord) from user-space service through the RDMA netlink channel.
The LIDs in these 3 PRs can be used in this way:
1. GMP PR: used as the standard local/remote LIDs;
2. DLID of outbound PR: Used as the "dlid" field for outbound traffic;
3. DLID of inbound PR: Used as the "dlid" field for outbound traffic in
responder side.
This is aimed to support adaptive routing. With current IB routing
solution when a packet goes out it's assigned with a fixed DLID per
target, meaning a fixed router will be used.
The LIDs in inbound/outbound path records can be used to identify group
of routers that allow communication with another subnet's entity. With
them packets from an inter-subnet connection may travel through any
router in the set to reach the target.
As confirmed with Jason, when sending a netlink request, kernel uses
LS_RESOLVE_PATH_USE_ALL so that the service knows kernel supports
multiple PRs.
Mark Zhang [Thu, 8 Sep 2022 10:09:00 +0000 (13:09 +0300)]
RDMA/core: Rename rdma_route.num_paths field to num_pri_alt_paths
This fields means the total number of primary and alternative paths,
i.e.,:
0 - No primary nor alternate path is available;
1 - Only primary path is available;
2 - Both primary and alternate path are available.
Rename it to avoid confusion as with follow patches primary path will
support multiple path records.
Bernard Metzler [Tue, 20 Sep 2022 08:25:03 +0000 (10:25 +0200)]
RDMA/siw: Fix QP destroy to wait for all references dropped.
Delay QP destroy completion until all siw references to QP are
dropped. The calling RDMA core will free QP structure after
successful return from siw_qp_destroy() call, so siw must not
hold any remaining reference to the QP upon return.
A use-after-free was encountered in xfstest generic/460, while
testing NFSoRDMA. Here, after a TCP connection drop by peer,
the triggered siw_cm_work_handler got delayed until after
QP destroy call, referencing a QP which has already freed.
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Reported-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20220920082503.224189-1-bmt@zurich.ibm.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Bernard Metzler [Tue, 20 Sep 2022 08:12:02 +0000 (10:12 +0200)]
RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Reported-by: Olga Kornievskaia <kolga@netapp.com> Tested-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gaosheng Cui [Sun, 11 Sep 2022 09:23:25 +0000 (17:23 +0800)]
IB/hfi1: remove rc_only_opcode and uc_only_opcode declarations
rc_only_opcode and uc_only_opcode have been removed since
commit b374e060cc2a ("IB/hfi1: Consolidate pio control masks
into single definition"), so remove them.
RDMA/srpt: Use flex array destination for memcpy()
In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object.
Notice that srp_rsp[] is a pointer to a structure that contains
flexible-array member data[]:
Many of erdma's includes are redundant, because they are already included
indirectly by kernel headers or custom headers. So we remove all the
unnecessary direct-includes. Besides, add linux/pci.h to erdma.h because
it's also used in the file.
RDMA/erdma: Eliminate unnecessary casting for erdma_post_cmd_wait
erdma_post_cmd_wait does not use the 'u64 *req' input parameter directly.
So it is better to define it to 'void *req', and by this we can eliminate
the casting when calling erdma_post_cmd_wait.
Fix the code for converting a SCSI command pointer into an SRP request
pointer.
Cc: Xiao Yang <yangx.jy@fujitsu.com> Fixes: ad215aaea4f9 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220908233139.3042628-1-bvanassche@acm.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently ib_copy_from_udata and ib_copy_to_udata could underfill
the request and response buffer if the user-space passes an undersized
value for udata->inlen or udata->outlen respectively [1]
This could lead to undesirable behavior.
Zero initing the buffer only goes as far as preventing using the buffer
uninitialized.
Validate udata->inlen and udata->outlen passed from user-space to ensure
they are at least the required minimum size.
RDMA/irdma: Align AE id codes to correct flush code and event
A number of asynchronous event (AE) ids were not aligned to the
correct flush_code and event_type. Fix these up so that the
correct IBV error and event codes are returned to application.
Also, add handling for new AE ids like IRDMA_AE_INVALID_REQUEST to
return the correct WC error code.
Tom Talpey [Wed, 31 Aug 2022 16:30:48 +0000 (12:30 -0400)]
RDMA/siw: Add missing Kconfig selections
The SoftiWARP Kconfig is missing "select" for CRYPTO and CRYPTO_CRC32C.
In addition, it improperly "depends on" LIBCRC32C, this should be a
"select", similar to net/sctp and others. As a dependency, SIW fails
to appear in generic configurations.
Daisuke Matsuda [Mon, 29 Aug 2022 07:12:18 +0000 (16:12 +0900)]
RDMA/rxe: Delete error messages triggered by incoming Read requests
An incoming Read request causes multiple Read responses. If a user MR to
copy data from is unavailable or responder cannot send a reply, then the
error messages can be printed for each response attempt, resulting in
message overflow.
Daisuke Matsuda [Mon, 29 Aug 2022 01:23:35 +0000 (10:23 +0900)]
RDMA/rxe: Remove an unused member from struct rxe_mr
Commit 1e75550648da ("Revert "RDMA/rxe: Create duplicate mapping tables for
FMRs"") brought back the member 'va' to struct rxe_mr. However, it is
actually used by nobody and thus can be removed.
Bart Van Assche [Thu, 25 Aug 2022 21:38:59 +0000 (14:38 -0700)]
RDMA/srp: Handle dev_set_name() failure
Instead of ignoring dev_set_name() failure, handle dev_set_name()
failure. Convert a device_register() call into device_initialize() and
device_add() calls.
Bart Van Assche [Thu, 25 Aug 2022 21:38:58 +0000 (14:38 -0700)]
RDMA/srp: Remove the srp_host.released completion
Move the kfree(host) calls into srp_release_dev(). Convert a
device_unregister() call into a device_del() and a device_put() call.
Remove the host->released completion object. This patch prepares for
handling dev_set_name() failure in srp_add_port().
Bart Van Assche [Thu, 25 Aug 2022 21:38:57 +0000 (14:38 -0700)]
RDMA/srp: Rework the srp_add_port() error path
device_register() always calls device_initialize() so calling device_del()
is safe even if device_register() fails. Implement the following advice
from the comment block above device_register(): "NOTE: _Never_ directly free
@dev after calling this function, even if it returned an error! Always use
put_device() to give up the reference initialized in this function instead."
Keep the kfree() call in the error path since srp_release_dev() does not
free the host.
Wenpeng Liang [Mon, 22 Aug 2022 10:44:50 +0000 (18:44 +0800)]
RDMA/hns: Add or remove CQ's restrack attributes
Remove the resttrack attributes from the queue context held by ROCEE, and
add the resttrack attributes from the queue information maintained by the
driver.
Wolfram Sang [Thu, 18 Aug 2022 21:00:18 +0000 (23:00 +0200)]
IB: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Michael Margolin [Thu, 18 Aug 2022 14:04:49 +0000 (17:04 +0300)]
RDMA/efa: Support CQ receive entries with source GID
Add a parameter for create CQ admin command to set source address on
receive completion descriptors. Report capability for this feature
through query device verb.
Link: https://lore.kernel.org/r/20220818140449.414-1-mrgolin@amazon.com Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com> Signed-off-by: Michael Margolin <mrgolin@amazon.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Santosh Pradhan [Thu, 18 Aug 2022 10:52:40 +0000 (12:52 +0200)]
RDMA/rtrs-srv: Add event tracing support
Add event tracing mechanism for following routines:
- send_io_resp_imm()
How to use:
1. Load the rtrs_server module
2. cd /sys/kernel/debug/tracing
3. If all the events need to be enabled:
echo 1 > events/rtrs_srv/enable
4. OR only speific routine/event needs to be enabled e.g.
echo 1 > events/rtrs_srv/send_io_resp_imm/enable
5. cat trace
6. Run some I/O workload which can trigger send_io_resp_imm()
Link: https://lore.kernel.org/r/20220818105240.110234-3-haris.iqbal@ionos.com Signed-off-by: Santosh Pradhan <santosh.pradhan@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Santosh Pradhan [Thu, 18 Aug 2022 10:52:39 +0000 (12:52 +0200)]
RDMA/rtrs-clt: Add event tracing support
Add event tracing mechanism for following routines:
- rtrs_clt_reconnect_work()
- rtrs_clt_close_conns()
- rtrs_rdma_error_recovery()
How to use:
1. Load the rtrs_client module
2. cd /sys/kernel/debug/tracing
3. If all the events need to be enabled:
echo 1 > events/rtrs_clt/enable
4. OR only speific routine/event needs to be enabled e.g.
echo 1 > events/rtrs_clt/rtrs_clt_close_conns/enable
5. cat trace
6. Run some workload which can trigger rtrs_clt_close_conns()
Link: https://lore.kernel.org/r/20220818105240.110234-2-haris.iqbal@ionos.com Signed-off-by: Santosh Pradhan <santosh.pradhan@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/mlx5: Don't compare mkey tags in DEVX indirect mkey
According to the ib spec:
If the CI supports the Base Memory Management Extensions defined in this
specification, the L_Key format must consist of:
24 bit index in the most significant bits of the R_Key, and
8 bit key in the least significant bits of the R_Key
Through a successful Allocate L_Key verb invocation, the CI must let the
consumer own the key portion of the returned R_Key
Therefore, when creating a mkey using DEVX, the consumer is allowed to
change the key part. The kernel should compare only the index part of a
R_Key to determine equality with another R_Key.
Adding capability in order not to break backward compatibility.
Jason Gunthorpe [Fri, 29 Jul 2022 16:33:38 +0000 (13:33 -0300)]
IB/mlx5: Call io_stop_wc() after writing to WC MMIO
This new function is defined only on ARM and serves to guarantee a barrier
in the WC operation. The barrier means that another run of this loop will
not combine with the stores this loop created.
On x86 this is happening implicitly because of the spin_unlock().
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Linus Torvalds [Sun, 14 Aug 2022 16:22:11 +0000 (09:22 -0700)]
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Linus Torvalds [Sun, 14 Aug 2022 15:48:13 +0000 (08:48 -0700)]
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Linus Torvalds [Sun, 14 Aug 2022 00:31:18 +0000 (17:31 -0700)]
Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
David Howells [Wed, 10 Aug 2022 17:52:47 +0000 (18:52 +0100)]
afs: Enable multipage folio support
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Aug 2022 21:38:22 +0000 (14:38 -0700)]
Merge tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Linus Torvalds [Sat, 13 Aug 2022 21:24:12 +0000 (14:24 -0700)]
Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Linus Torvalds [Sat, 13 Aug 2022 21:00:45 +0000 (14:00 -0700)]
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Linus Torvalds [Sat, 13 Aug 2022 20:50:11 +0000 (13:50 -0700)]
Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
projects / thirdparty / kernel / stable.git / log
