Stefan Schantl [Thu, 16 Dec 2021 19:23:36 +0000 (20:23 +0100)]
suricata: Do not load rules for dnp3 and modbus.
The parsers for those are disabled in the suricata config so
the rules are not needed, on the contrary they massively will spam
warnings when launching suricate because of the disabled parsers.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Stefan Schantl [Thu, 16 Dec 2021 19:04:41 +0000 (20:04 +0100)]
suricata: Do not load rules for dnp3 and modbus.
The parsers for those are disabled in the suricata config so
the rules are not needed, on the contrary they massively will spam
warnings when launching suricate because of the disabled parsers.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
This rule emits a massive logspam and temporary will be disabled until
a better solution is found.
Fixes #12738.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Stefan Schantl [Wed, 8 Dec 2021 17:10:31 +0000 (18:10 +0100)]
suricata: Cleanup default loaded rules file.
There are no such rules file available and therefore cannot be loaded.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Stefan Schantl [Wed, 8 Dec 2021 17:10:30 +0000 (18:10 +0100)]
suricata: Move default loaded rulefiles to own included file.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Acked-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 6 Dec 2021 17:01:32 +0000 (18:01 +0100)]
pcengines-apu-firmware: Update to version 4.15.0.1
- Update from 4.14.0.4 to 4.15.0.1
- Update of rootfile
- Changelog
v4.15.0.1
rebased with official coreboot repository commit 6973a3e7
v4.14.0.6
rebased with official coreboot repository commit d06c0917
Re-added GPIO bindings to fix LED and button functionality
v4.14.0.5
rebased with official coreboot repository commit d4c55353
Updated CPU declarations in ACPI to comply with newer ACPI standard
Removed GPIO bindings to fix conflict with OS drivers
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Jon Murphy [Sat, 4 Dec 2021 23:46:20 +0000 (00:46 +0100)]
manualpages: Complete the list of user manual pages
Jon Murphy gathered all the links and made the updated file
available on the mailing list:
https://lists.ipfire.org/pipermail/development/2021-October/011383.html
https://lists.ipfire.org/pipermail/development/2021-December/011737.html
With kind permission from him, this patch contains the completed list.
The list was successfully checked with "./make.sh check-manualpages".
Signed-off-by: Leo-Andres Hofmann <hofmann@leo-andres.de> Reported-by: Jon Murphy <jcmurphy26@gmail.com> Reviewed-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
sysctl: kernel 5.13 has removed some scheduler variables.
sched_min_granularity_ns and sched_migration_cost_ns are not
available for sysctl anymore. They can only altered via debugfs
if scheduler debugging is enabled.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Jonatan Schlag [Sun, 28 Nov 2021 15:43:52 +0000 (16:43 +0100)]
Inform users about the eol of i?86
The warning point to a wiki page which is currently in construction.
This should give us the opportunity to add further information for
these users even if we do not provide updates anymore.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Peter Müller [Wed, 24 Nov 2021 11:12:27 +0000 (12:12 +0100)]
Tor: update to 0.4.6.8
Full changelog as per https://gitweb.torproject.org/tor.git/plain/ChangeLog?h=tor-0.4.6.8:
Changes in version 0.4.6.8 - 2021-10-26
This version fixes several bugs from earlier versions of Tor. One
highlight is a fix on how we track DNS timeouts to report general
relay overload.
o Major bugfixes (relay, overload state):
- Relays report the general overload state for DNS timeout errors
only if X% of all DNS queries over Y seconds are errors. Before
that, it only took 1 timeout to report the overload state which
was just too low of a threshold. The X and Y values are 1% and 10
minutes respectively but they are also controlled by consensus
parameters. Fixes bug 40491; bugfix on 0.4.6.1-alpha.
o Minor features (fallbackdir):
- Regenerate fallback directories for October 2021. Closes
ticket 40493.
o Minor features (testing):
- On a testing network, relays can now use the
TestingMinTimeToReportBandwidth option to change the smallest
amount of time over which they're willing to report their observed
maximum bandwidth. Previously, this was fixed at 1 day. For
safety, values under 2 hours are only supported on testing
networks. Part of a fix for ticket 40337.
- Relays on testing networks no longer rate-limit how frequently
they are willing to report new bandwidth measurements. Part of a
fix for ticket 40337.
- Relays on testing networks now report their observed bandwidths
immediately from startup. Previously, they waited until they had
been running for a full day. Closes ticket 40337.
o Minor bugfix (onion service):
- Do not flag an HSDir as non-running in case the descriptor upload
or fetch fails. An onion service closes pending directory
connections before uploading a new descriptor which can thus lead
to wrongly flagging many relays and thus affecting circuit building
path selection. Fixes bug 40434; bugfix on 0.2.0.13-alpha.
- Improve logging when a bad HS version is given. Fixes bug 40476;
bugfix on 0.4.6.1-alpha.
o Minor bugfix (CI, onion service):
- Exclude onion service version 2 Stem tests in our CI. Fixes bug 40500;
bugfix on 0.3.2.1-alpha.
o Minor bugfixes (compatibility):
- Fix compatibility with the most recent Libevent versions, which no
longer have an evdns_set_random_bytes() function. Because this
function has been a no-op since Libevent 2.0.4-alpha, it is safe
for us to just stop calling it. Fixes bug 40371; bugfix
on 0.2.1.7-alpha.
o Minor bugfixes (onion service, TROVE-2021-008):
- Only log v2 access attempts once total, in order to not pollute
the logs with warnings and to avoid recording the times on disk
when v2 access was attempted. Note that the onion address was
_never_ logged. This counts as a Low-severity security issue.
Fixes bug 40474; bugfix on 0.4.5.8.
Since we configure Tor to use libseccomp, the latter has been updated
for kernel 5.15 as well, hence we need to ship Tor either way.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Wed, 24 Nov 2021 11:11:48 +0000 (12:11 +0100)]
libseccomp: Update to 2.5.3
Release annnouncement as per https://github.com/seccomp/libseccomp/releases/tag/v2.5.3:
Version 2.5.3 - November 5, 2021
Update the syscall table for Linux v5.15
Fix issues with multiplexed syscalls on mipsel introduced in v2.5.2
Document that seccomp_rule_add() may return -EACCES
Fix issues with test 11-basic-basic_errors on old kernels (API level < 5)
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Fri, 6 Aug 2021 11:16:41 +0000 (13:16 +0200)]
whois: Installation of aan actively maintained whois client
- This whois client is being actively maintained. This version 5.5.10 was released on
June 6th 2021 and regular updates have been ocurring several times per year.
- This client has all of its default whois servers compiled into it. These can be seen
by reading the source files in the tarball.
- Therefore the whois.conf file is available for any additional servers that are decided
to be required but as provided is empty.
- Installed on a vm testbed and worked to identify the details of ip addresses. Selecting
an IP in the WUI logs screen also gets the ip information provided so it is working
well with the WUI.
Tested-by:Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Fri, 6 Aug 2021 11:16:40 +0000 (13:16 +0200)]
make.sh: Remove jwhois and replace with whois
- jwhois is no longer being maintained. The last release was from 2005 and the last commit
was in 2015. https://github.com/jonasob/jwhois
- Debian switched to another whois client which is being actively maintained.
https://github.com/rfc1036/whois
- This patch series is the removal of jwhois and the installation of whois
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:21:39 +0000 (23:21 +0200)]
slang: Update to version 2.3.2
- Update from 2.3.0 to 2.3.2
- Update rootfile
- Changelog is too large to include here. Details can be found in the changes.txt file in
the source tarball.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:21:56 +0000 (23:21 +0200)]
sshfs: Update to version 3.7.2
- Update from 3.7.1 to 3.7.2
- Update of rootfile not required
- Changelog
Release 3.7.2 (2021-06-08)
* Added a secondary check so if a mkdir request fails with EPERM an access request
will be tried - returning EEXIST if the access was successful. Fixes: https://github.com/libfuse/sshfs/issues/243 Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:22:10 +0000 (23:22 +0200)]
sslh: Update to version 1.22c
- Update from 1.7a (2013) to 1.22c (2021)
- Update rootfile
- Changelog is too large to include here. Full details can be read in the ChangeLog file
in the source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:22:32 +0000 (23:22 +0200)]
strace: Update to version 5.14
- Update from 5.11 to 5.14
- Update of rootfile not required
- Changelog
Noteworthy changes in release 5.14 (2021-09-02)
* Improvements
* Implemented decoding of memfd_secret and quotactl_fd syscalls,
introduced in Linux 5.14.
* Enhanced prctl syscall decoding.
* Enhanced decoding of IFLA_* netlink attributes.
* Enhanced decoding of MDBA_ROUTER_PATTR_* mdb router port netlink attributes.
* Updated lists of BPF_*, IORING_*, MADV_*, MOUNT_ATTR_*, SCTP_*,
and UFFD_* constants.
* Updated lists of ioctl commands from Linux 5.14.
* Bug fixes
* Fixed build using bionic libc.
Noteworthy changes in release 5.13 (2021-07-18)
* Improvements
* Print netlink data in a more structured way.
* Implemented decoding of NT_PRSTATUS and NT_FPREGSET regsets
of PTRACE_GETREGSET and PTRACE_SETREGSET requests.
* Implemented decoding of regs argument of PTRACE_GETREGS, PTRACE_GETREGS64,
PTRACE_SETREGS, PTRACE_SETREGS64, PTRACE_GETFPREGS, and PTRACE_SETFPREGS
requests.
* Implemented powerpc System Call Vectored ABI support.
* Implemented decoding of landlock_add_rule, landlock_create_ruleset,
and landlock_restrict_self syscalls introduced in Linux 5.13.
* Enhanced decoding of perf_event_open syscall.
* Updated lists of BPF_*, IORING_*, KEXEC_*, KEY_*, KVM_*, NT_*, PR_*,
PTRACE_*, RTM_*, RTPROT_*, TRAP_*, UFFD_*, UFFDIO_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 5.13.
* Portability
* On powerpc and powerpc64, linux kernel >= 2.6.23 is required.
Older versions without a decent PTRACE_GETREGS support will not work.
Noteworthy changes in release 5.12 (2021-04-26)
* Improvements
* Implemented --secontext[=full] option to display SELinux contexts.
* Implemented decoding of mount_setattr syscall introduced in Linux 5.12.
* Updated decoding of IFLA_BRPORT_* netlink attributes to match Linux 5.12.
* Updated lists of DEVCONF_*, IORING_*, KVM_*, MPOL_*, MTD_*, NFT_MSG_*,
RESOLVE_*, RTM_*, ST_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 5.12.
* Bug fixes
* Fixed build using bionic libc.
* Portability
* Added binutils 2.36 support to --enable-mpers builds.
- More details of the above changes can be found in the ChangeLog file in the source
tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Thu, 11 Nov 2021 08:14:48 +0000 (09:14 +0100)]
bind: Update to version 9.16.22
- Update from 9.11.32 to 9.16.22
- 9.11 is an ESV (Extended Support Version) that will go EOL in December 2021
9.16 is the replacement ESV whose EOL is not yet defined but will be at least 4 years
so should be supported until at least March 2024 as the 9.16 branch was started in 2020
- Update rootfile
- libuv is now required both to build the bind libraries and for the running of the
utilities.
- Changelog is difficult to define here as this is a change of branch from 9.11 to 9.16
both of which have been running in parallel. However all the changes from the start of
9.16.0 can be found in the CHANGES file in the source tarball.
- nslookup, host and dig utilities tested out by installing this on a vm testbed. All
these utilities worked as the previous version
nsupdate was not able to be tested other than confirming that running nsupdate
opened an interactive session. This utility would be good to be tested by someone
familiar with how to run it.
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Peter Müller [Sun, 10 Oct 2021 19:49:49 +0000 (21:49 +0200)]
proxy.cgi: Fix translation string mix-up
"advproxy advanced web proxy" was meant to be used in the first place,
followed by "advproxy advanced web proxy configuration", as it is done
in other CGIs.
This patch also fixes a missing German translation, and improves
translations of "one X per line" ("eines" != "eins"). :-)
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:29:23 +0000 (22:29 +0200)]
meson: Update to version 0.59.2
- Update from 0.58.0 to 0.59.2
- Update rootfile
- Changelog is too long to include here.
Full details can be read at https://mesonbuild.com/Release-notes-for-0-59-0.html
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:27:58 +0000 (22:27 +0200)]
bison: Update to version 3.8.2
- Update from 3.7.6 to 3.8.2
- Update rootfile
- Changelog
Noteworthy changes in release 3.8.2 (2021-09-25) [stable]
Fixed portability issues of bison on Cygwin.
Improvements in glr2.cc: add support for custom error messages (`%define
parse.error custom`), allow linking several parsers together.
Noteworthy changes in release 3.8.1 (2021-09-11) [stable]
The generation of prototypes for yylex and yyerror in Yacc mode is
breaking existing grammar files. To avoid breaking too many grammars, the
prototypes are now generated when `-y/--yacc` is used *and* the
`POSIXLY_CORRECT` environment variable is defined.
Avoid using `-y`/`--yacc` simply to comply with Yacc's file name
conventions, rather, use `-o y.tab.c`. Autoconf's AC_PROG_YACC macro uses
`-y`. Avoid it if possible, for instance by using gnulib's gl_PROG_BISON.
Noteworthy changes in release 3.8 (2021-09-07) [stable]
** Backward incompatible changes
In conformance with the recommendations of the Graphviz team
(https://marc.info/?l=graphviz-devel&m=129418103126092), `-g`/`--graph`
now generates a *.gv file by default, instead of *.dot. A transition
started in Bison 3.4.
To comply with the latest POSIX standard, in Yacc compatibility mode
(options `-y`/`--yacc`) Bison now generates prototypes for yyerror and
yylex. In some situations, this is breaking compatibility: if the user
has already declared these functions but with some differences (e.g., to
declare them as static, or to use specific attributes), the generated
parser will fail to compile. To disable these prototypes, #define yyerror
(to `yyerror`), and likewise for yylex.
** Deprecated features
Support for the YYPRINT macro is removed. It worked only with yacc.c and
only for tokens. It was obsoleted by %printer, introduced in Bison 1.50
(November 2002).
It has always been recommended to prefer `%define api.value.type foo` to
`#define YYSTYPE foo`. The latter is supported in C for compatibility
with Yacc, but not in C++. Warnings are now issued if `#define YYSTYPE`
is used in C++, and eventually support will be removed.
In C++ code, prefer value_type to semantic_type to denote the semantic
value type, which is specified by the `api.value.type` %define variable.
** New features
*** A skeleton for the D programming language
The "lalr1.d" skeleton is now officially part of Bison.
It was originally contributed by Oliver Mangold, based on Paolo Bonzini's
lalr1.java, and was improved by H. S. Teoh. Adela Vais then took over
maintenance and invested a lot of efforts to complete, test and document
it.
It now supports all the bells and whistles of the other deterministic
parsers, which include: pull/push interfaces, verbose and custom error
messages, lookahead correction, token constructors, internationalization,
locations, printers, token and symbol prefixes, etc.
Two examples demonstrate the D parsers: a basic one (examples/d/simple),
and an advanced one (examples/d/calc).
*** Option -H, --header and directive %header
The option `-H`/`--header` supersedes the option `--defines`, and the
directive %header supersedes %defines. Both `--defines` and `%defines`
are, of course, maintained for backward compatibility.
*** Option --html
Since version 2.4 Bison can be used to generate HTML reports. However it
was a two-step process: first bison must be invoked with option `--xml`,
and then xsltproc must be run to the convert the XML reports into HTML.
The new option `--html` combines these steps. The xsltproc program must
be available.
*** A C++ native GLR parser
A new version of the C++ GLR parser was added: "glr2.cc". It generates
"true C++11", instead of a C++ wrapper around a C parser as does the
existing "glr.cc" parser. As a first significant consequence, it supports
`%define api.value.type variant`, contrary to glr.cc.
It should be upward compatible in terms of interface, feature and
performance to "glr.cc". To try it out, simply use
%skeleton "glr2.cc"
It will eventually replace "glr.cc". However we need user feedback on
this skeleton. _Please_ report your results and comments about it.
*** Counterexamples
Counterexamples now show the rule numbers, and always show ε for rules
with an empty right-hand side. For instance
exp
↳ 1: e1 e2 "a"
↳ 3: ε • ↳ 1: ε
instead of
exp
↳ e1 e2 "a"
↳ • ↳ ε
*** Lookahead correction in Java
The Java skeleton (lalr1.java) now supports LAC, via the `parse.lac`
%define variable.
*** Abort parsing for memory exhaustion (C)
User actions may now use `YYNOMEM` (similar to `YYACCEPT` and `YYABORT`)
to abort the current parse with memory exhaustion.
*** Printing locations in debug traces (C)
The `YYLOCATION_PRINT(File, Loc)` macro prints a location. It is defined
when (i) locations are enabled, (ii) the default type for locations is
used, (iii) debug traces are enabled, and (iv) `YYLOCATION_PRINT` is not
already defined.
Users may define `YYLOCATION_PRINT` to cover other cases.
*** GLR traces
There were no debug traces for deferred calls to user actions. They are
logged now.
Noteworthy changes in release 3.7.6 (2021-03-08) [stable]
** Bug fixes
*** Reused Push Parsers
When a push-parser state structure is used for multiple parses, it was
possible for some state to leak from one run into the following one.
*** Fix Table Generation
In some very rare conditions, when there are many useless tokens, it was
possible to generate incorrect parsers.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 19 Nov 2021 17:44:52 +0000 (17:44 +0000)]
suricata: Include all default rules
These rules do not drop anything, but only alert when internal parts of
the engine trigger an event. This will allow us more insight on what is
happening.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:29:05 +0000 (22:29 +0200)]
jansson: Update to version 2.14
- Update from 2.12 to 2.14
- Update rootfile
- Changelog
Version 2.14 Released 2021-09-09
* New Features:
- Add `json_object_getn`, `json_object_setn`, `json_object_deln`, and the
corresponding `nocheck` functions. (#520, by Maxim Zhukov)
* Fixes:
- Handle `sprintf` corner cases (#537, by Tobias Stoeckmann)
* Build:
- Symbol versioning for all exported symbols (#540, by Simon McVittie)
- Fix compiler warnings (#555, by Kelvin Lee)
* Documentation:
- Small fixes (#544, #546, by @i-ky)
- Sphinx 3 compatibility (#543, by Pierce Lopez)
Version 2.13.1 Released 2020-05-07
* Build:
- Include `jansson_version_str()` and `jansson_version_cmp()` in
shared library. (#534)
- Include ``scripts/`` in tarball. (#535)
Version 2.13 Released 2020-05-05
* New Features:
- Add `jansson_version_str()` and `jansson_version_cmp()` for runtime
version checking (#465).
- Add `json_object_update_new()`, `json_object_update_existing_new()`
and `json_object_update_missing_new()` functions (#499).
- Add `json_object_update_recursive()` (#505).
* Build:
- Add ``-Wno-format-truncation`` to suppress format truncation warnings (#489).
* Bug fixes:
- Remove ``strtod`` macro definition for MinGW (#498).
- Add infinite loop check in `json_deep_copy()` (#490).
- Add ``pipe`` macro definition for MinGW (#500).
- Enhance ``JANSSON_ATTRS`` macro to support earlier C standard(C89) (#501).
- Update version detection for sphinx-build (#502).
* Documentation:
- Fix typos (#483, #494).
- Document that call the custom free function to free the return value
of `json_dumps()` if you have a custom malloc/free (#490).
- Add vcpkg installation instructions (#496).
- Document that non-blocking file descriptor is not supported on
`json_loadfd()` (#503).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Matthias Fischer [Sat, 20 Nov 2021 12:47:31 +0000 (13:47 +0100)]
suricata: Update to 5.0.8
For details see:
https://forum.suricata.io/t/suricata-6-0-4-and-5-0-8-released/1942
"Various security, performance, accuracy and stability issues have been fixed,
including two TCP evasion issues. CVE 2021-37592 was assigned."
Changelog:
"5.0.8 -- 2021-11-16
Security #4635: tcp: crafted injected packets cause desync after 3whs
Security #4727: Bypass of Payload Detection on TCP RST with options of MD5header
Bug #4345: Failed assert in TCPProtoDetectCheckBailConditions size_ts > 1000000UL
Bug #4382: fileinfo "stored: false" even if the file is kept on disk
Bug #4626: DNP3: intra structure overflow in DNP3DecodeObjectG70V6
Bug #4628: alert count shows up as 0 when stats are disabled
Bug #4631: Protocol detection : confusion with SMB in midstream
Bug #4639: Failed assertion in SMTP SMTPTransactionComplete
Bug #4646: TCP reassembly, failed assert app_progress > last_ack_abs, both sides need to be pruned
Bug #4647: rules: Unable to find the sm in any of the sm lists
Bug #4674: rules: mix of drop and pass rules issues
Bug #4676: rules: drop rules with noalert not fully dropping
Bug #4688: detect: too many prefilter engines lead to FNs
Bug #4690: nfs: failed assert self.tx_data.files_logged > 1
Bug #4691: IPv6 : decoder event on invalid fragment length
Bug #4696: lua: file info callback returns wrong value
Bug #4718: protodetect: SEGV due to NULL ptr deref
Bug #4729: ipv6 evasions : fragmentation
Bug #4788: Memory leak in SNMP with DetectEngineState
Bug #4790: af-packet: threads sometimes get stuck in capture
Bug #4794: loopback: different AF_INET6 values per OS
Bug #4816: flow-manager: cond_t handling in emergency mode is broken
Bug #4831: SWF decompression overread
Bug #4833: Wrong list_id with transforms for http_client_body and http file_data
Optimization #3429: improve err msg for dataset rules parsing
Task #4835: libhtp 0.5.39"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>