Dave Airlie [Fri, 18 Jul 2025 04:04:02 +0000 (14:04 +1000)]
Merge tag 'drm-xe-fixes-2025-07-17' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- SR-IOV fixes for GT reset and TLB invalidation
- Fix memory copy direction during migration
- Fix alignment check on migration
- Fix MOCS and page fault init order to correctly
account for topology
drm/mediatek: mtk_dpi: Reorder output formats on MT8195/88
Reorder output format arrays in both MT8195 DPI and DP_INTF block
configuration by decreasing preference order instead of alphanumeric
one, as expected by the atomic_get_output_bus_fmts callback function
of drm_bridge controls, so the RGB ones are used first during the
bus format negotiation process.
Icenowy Zheng [Sat, 31 May 2025 12:11:40 +0000 (20:11 +0800)]
drm/mediatek: only announce AFBC if really supported
Currently even the SoC's OVL does not declare the support of AFBC, AFBC
is still announced to the userspace within the IN_FORMATS blob, which
breaks modern Wayland compositors like KWin Wayland and others.
Gate passing modifiers to drm_universal_plane_init() behind querying the
driver of the hardware block for AFBC support.
Jason-JH Lin [Tue, 24 Jun 2025 11:31:41 +0000 (19:31 +0800)]
drm/mediatek: Add wait_event_timeout when disabling plane
Our hardware registers are set through GCE, not by the CPU.
DRM might assume the hardware is disabled immediately after calling
atomic_disable() of drm_plane, but it is only truly disabled after the
GCE IRQ is triggered.
Additionally, the cursor plane in DRM uses async_commit, so DRM will
not wait for vblank and will free the buffer immediately after calling
atomic_disable().
To prevent the framebuffer from being freed before the layer disable
settings are configured into the hardware, which can cause an IOMMU
fault error, a wait_event_timeout has been added to wait for the
ddp_cmdq_cb() callback,indicating that the GCE IRQ has been triggered.
Michal Wajdeczko [Fri, 11 Jul 2025 19:33:12 +0000 (21:33 +0200)]
drm/xe/pf: Resend PF provisioning after GT reset
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Michal Wajdeczko [Fri, 11 Jul 2025 19:33:11 +0000 (21:33 +0200)]
drm/xe/pf: Prepare to stop SR-IOV support prior GT reset
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Lucas De Marchi [Thu, 10 Jul 2025 21:34:41 +0000 (14:34 -0700)]
drm/xe/migrate: Fix alignment check
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Matthew Brost [Thu, 10 Jul 2025 19:12:08 +0000 (12:12 -0700)]
drm/xe: Move page fault init after topology init
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Matthew Auld [Thu, 10 Jul 2025 13:41:29 +0000 (14:41 +0100)]
drm/xe/migrate: fix copy direction in access_memory
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
(cherry picked from commit c12fe703cab93f9d8bfe0ff32b58e7b1fd52be1f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Skipping TLB invalidations on VF causing unrecoverable
faults. Probable reason for skipping TLB invalidations
on SRIOV could be lack of support for instruction
MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some
additional handling.
drm/amdgpu/gfx8: reset compute ring wptr on the GPU on resume
Commit 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
drm/amdgpu: Increase reset counter only on success
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3ec3d30e4ee282540e2096b5c66a2437) Cc: stable@vger.kernel.org
drm/radeon: Do not hold console lock during resume
The function radeon_resume_kms() acquires the console lock. It is
inconsistent, as it depends on the notify_client argument. That
lock then covers a number of suspend operations that are unrelated
to the console.
Remove the calls to console_lock() and console_unlock() from the
radeon function. The console lock is only required by DRM's fbdev
emulation, which acquires it as necessary.
Also fixes a possible circular dependency between the console lock
and the client-list mutex, where the mutex is supposed to be taken
first.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fff8e0504499a929f26e2fb7cf7e2c9854e37b91)
drm/radeon: Do not hold console lock while suspending clients
The radeon driver holds the console lock while suspending in-kernel
DRM clients. This creates a circular dependency with the client-list
mutex, which is supposed to be acquired first. Reported when combining
radeon with another DRM driver.
Therefore, do not take the console lock in radeon, but let the fbdev
DRM client acquire the lock when needed. This is what all other DRM
drivers so.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/dri-devel/0a087cfd-bd4c-48f1-aa2f-4a3b12593935@oss.qualcomm.com/ Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 612ec7c69d04cb58beb1332c2806da9f2f47a3ae)
drm/amd/display: Disable CRTC degamma LUT for DCN401
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 340231cdceec2c45995d773a358ca3c341f151aa) Cc: stable@vger.kernel.org
Imre Deak [Tue, 8 Jul 2025 21:23:31 +0000 (00:23 +0300)]
drm/dp: Change AUX DPCD probe address from LANE0_1_STATUS to TRAINING_PATTERN_SET
Commit a3ef3c2da675 ("drm/dp: Change AUX DPCD probe address from
DPCD_REV to LANE0_1_STATUS") stopped using the DPCD_REV register for
DPCD probing, since this results in link training failures at least when
using an Intel Barlow Ridge TBT hub at UHBR link rates (the
DP_INTRA_HOP_AUX_REPLY_INDICATION never getting cleared after the failed
link training). Since accessing DPCD_REV during link training is
prohibited by the DP Standard, LANE0_1_STATUS (0x202) was used instead,
as it falls within the Standard's valid register address range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) and it fixed the link
training on the above TBT hub.
However, reading the LANE0_1_STATUS register also has a side-effect at
least on a Novatek eDP panel, as reported on the Closes: link below,
resulting in screen flickering on that panel. One clear side-effect when
doing the 1-byte probe reads from LANE0_1_STATUS during link training
before reading out the full 6 byte link status starting at the same
address is that the panel will report the link training as completed
with voltage swing 0. This is different from the normal, flicker-free
scenario when no DPCD probing is done, the panel reporting the link
training complete with voltage swing 2.
Using the TRAINING_PATTERN_SET register for DPCD probing doesn't have
the above side-effect, the panel will link train with voltage swing 2 as
expected and it will stay flicker-free. This register is also in the
above valid register range and is unlikely to have a side-effect as that
of LANE0_1_STATUS: Reading LANE0_1_STATUS is part of the link training
CR/EQ sequences and so it may cause a state change in the sink - even if
inadvertently as I suspect in the case of the above Novatek panel. As
opposed to this, reading TRAINING_PATTERN_SET is not part of the link
training sequence (it must be only written once at the beginning of the
CR/EQ sequences), so it's unlikely to cause any state change in the
sink.
As a side-note, this Novatek panel also lacks support for TPS3, while
claiming support for HBR2, which violates the DP Standard (the Standard
mandating TPS3 for HBR2).
Besides the Novatek panel (PSR 1), which this change fixes, I also
verified the change on a Samsung (PSR 1) and an Analogix (PSR 2) eDP
panel as well as on the Intel Barlow Ridge TBT hub.
Note that in the drm-tip tree (targeting the v6.17 kernel version) the
i915 and xe drivers keep DPCD probing enabled only for the panel known
to require this (HP ZR24w), hence those drivers in drm-tip are not
affected by the above problem.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Fixes: a3ef3c2da675 ("drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") Reported-and-tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558 Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250708212331.112898-1-imre.deak@intel.com
(cherry picked from commit bba9aa41654036534d86b198f5647a9ce15ebd7f)
[Imre: Rebased on drm-intel-fixes] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Changed original commit hash to match with the one propagated in fixes]
Philipp Stanner [Wed, 9 Jul 2025 10:29:58 +0000 (12:29 +0200)]
drm/panfrost: Fix scheduler workqueue bug
When the GPU scheduler was ported to using a struct for its
initialization parameters, it was overlooked that panfrost creates a
distinct workqueue for timeout handling.
The pointer to this new workqueue is not initialized to the struct,
resulting in NULL being passed to the scheduler, which then uses the
system_wq for timeout handling.
Set the correct workqueue to the init args struct.
Cc: stable@vger.kernel.org # 6.15+ Fixes: 796a9f55a8d1 ("drm/sched: Use struct for drm_sched_init() params") Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Closes: https://lore.kernel.org/dri-devel/b5d0921c-7cbf-4d55-aa47-c35cd7861c02@igalia.com/ Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250709102957.100849-2-phasta@kernel.org
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
Merge tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
Merge tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
Merge tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Fix for a cache aliasing issue by adding missing flush_dcache_folio(),
which causes execution failures on some arm32 setups.
Fix for large compressed fragments, which could be generated by
-Eall-fragments option (but should be rare) and was rejected by
mistake due to an on-disk hardening commit.
The remaining ones are small fixes. Summary:
- Address cache aliasing for mappable page cache folios
- Allow readdir() to be interrupted
- Fix large fragment handling which was errored out by mistake
- Add missing tracepoints
- Use memcpy_to_folio() to replace copy_to_iter() for inline data"
* tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix large fragment handling
erofs: allow readdir() to be interrupted
erofs: address D-cache aliasing
erofs: use memcpy_to_folio() to replace copy_to_iter()
erofs: fix to add missing tracepoint in erofs_read_folio()
erofs: fix to add missing tracepoint in erofs_readahead()
Merge tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix use after free in lease break
- small fix for freeing rdma transport (fixes missing logging of
cm_qp_destroy)
- fix write count leak
* tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential use-after-free in oplock/lease break ack
ksmbd: fix a mount write count leak in ksmbd_vfs_kern_path_locked()
smb: server: make use of rdma_destroy_qp()
Merge tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
Core Changes:
- fix race in gem_handle_create_tail
- fixup handle_count fb refcount regression from -rc5, popular with
reports ...
- call rust dtor for drm_device release
Driver Changes:
- nouveau: magic 50ms suspend fix, acpi leak fix
- tegra: dma api error in nvdec
- pvr: fix device reset
- habanalbs maintainer update
- intel display: fix some dsi mipi sequences
- xe fixes: SRIOV fixes, small GuC fixes, disable indirect ring due
to issues, compression fix for fragmented BO, doc update
* tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe/guc: Default log level to non-verbose
drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VF
drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2
drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()
drm/xe: Release runtime pm for error path of xe_devcoredump_read()
drm/xe/pm: Restore display pm if there is error after display suspend
drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too
drm/gem: Fix race in drm_gem_handle_create_tail()
drm/framebuffer: Acquire internal references on GEM handles
agp/amd64: Check AGP Capability before binding to unsupported devices
drm/xe/bmg: fix compressed VRAM handling
Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2"
drm/xe: Allocate PF queue size on pow2 boundary
drm/xe/pf: Clear all LMTT pages on alloc
drm/nouveau/gsp: fix potential leak of memory used during acpi init
rust: drm: remove unnecessary imports
MAINTAINERS: Change habanalabs maintainer
drm/imagination: Fix kernel crash when hard resetting the GPU
drm/tegra: nvdec: Fix dma_alloc_coherent error check
rust: drm: device: drop_in_place() the drm::Device in release()
...
I haven't figured out what the actual bug in this commit is, but I did
spend a lot of time chasing it down and eventually succeeded in
bisecting it down to this.
For some reason, this eventpoll commit ends up causing delays and stuck
user space processes, but it only happens on one of my machines, and
only during early boot or during the flurry of initial activity when
logging in.
I must be triggering some very subtle timing issue, but once I figured
out the behavior pattern that made it reasonably reliable to trigger, it
did bisect right to this, and reverting the commit fixes the problem.
Of course, that was only after I had failed at bisecting it several
times, and had flailed around blaming both the drm people and the
netlink people for the odd problems. The most obvious of which happened
at the time of the first graphical login (the most common symptom being
that some gnome app aborted due to a 30s timeout, often leading to the
whole session then failing if it was some critical component like
gnome-shell or similar).
Acked-by: Nam Cao <namcao@linutronix.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fragments aren't limited by Z_EROFS_PCLUSTER_MAX_DSIZE. However, if
a fragment's logical length is larger than Z_EROFS_PCLUSTER_MAX_DSIZE
but the fragment is not the whole inode, it currently returns
-EOPNOTSUPP because m_flags has the wrong EROFS_MAP_ENCODED flag set.
It is not intended by design but should be rare, as it can only be
reproduced by mkfs with `-Eall-fragments` in a specific case.
Let's normalize fragment m_flags using the new EROFS_MAP_FRAGMENT.
nouveau_drm_ioctl() only checks the _IOC_NR() bits in the
DRM_NOUVEAU_NVIF command, but ignores the type and direction bits, so any
command with '7' in the low eight bits gets passed into
nouveau_abi16_ioctl() instead of drm_ioctl().
Check for all the bits except the size that is handled inside of the
handler.
Fixes: 27111a23d01c ("drm/nouveau: expose the full object/event interfaces to userspace") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Fix up two checkpatch warnings and a typo. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250711072458.2665325-1-arnd@kernel.org
Merge tag 'block-6.16-20250710' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD changes via Yu:
- fix UAF due to stack memory used for bio mempool (Jinchao)
- fix raid10/raid1 nowait IO error path (Nigel and Qixing)
- fix kernel crash from reading bitmap sysfs entry (Håkon)
- Fix for a UAF in the nbd connect error path
- Fix for blocksize being bigger than pagesize, if THP isn't enabled
* tag 'block-6.16-20250710' of git://git.kernel.dk/linux:
block: reject bs > ps block devices when THP is disabled
nbd: fix uaf in nbd_genl_connect() error path
md/md-bitmap: fix GPF in bitmap_get_stats()
md/raid1,raid10: strip REQ_NOWAIT from member bios
raid10: cleanup memleak at raid10_make_request
md/raid1: Fix stack memory use after return in raid1_reshape
Merge tag 'io_uring-6.16-20250710' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Remove a pointless warning in the zcrx code
- Fix for MSG_RING commands, where the allocated io_kiocb
needs to be freed under RCU as well
- Revert the work-around we had in place for the anon inodes
pretending to be regular files. Since that got reworked
upstream, the work-around is no longer needed
* tag 'io_uring-6.16-20250710' of git://git.kernel.dk/linux:
Revert "io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well"
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
io_uring/zcrx: fix pp destruction warnings
Merge tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
Merge tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: remove bouncing address for Nandor Han
gpio: of: initialize local variable passed to the .of_xlate() callback
gpiolib: fix performance regression when using gpio_chip_get_multiple()
Merge tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
Jakub Kicinski [Fri, 11 Jul 2025 00:11:21 +0000 (17:11 -0700)]
netlink: make sure we allow at least one dump skb
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Jakub Kicinski [Fri, 11 Jul 2025 14:28:36 +0000 (07:28 -0700)]
Merge branch 'bnxt_en-3-bug-fixes'
Michael Chan says:
====================
bnxt_en: 3 bug fixes
The first one fixes a possible failure when setting DCB ETS.
The second one fixes the ethtool coredump (-W 2) not containing
all the FW traces. The third one fixes the DMA unmap length when
transmitting XDP_REDIRECT packets.
====================
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
bnxt_en: Flush FW trace before copying to the coredump
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Jianbo Liu [Thu, 10 Jul 2025 13:53:44 +0000 (16:53 +0300)]
net/mlx5e: Add new prio for promiscuous mode
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Fix race between DIM disable and net_dim()
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
net/mlx5: Reset bw_share field when changing a node's parent
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 11 Jul 2025 14:07:56 +0000 (07:07 -0700)]
Merge tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-11
Sean Nyekjaer's patch targets the m_can driver and demotes the "msg
lost in rx" message to debug level to prevent flooding the kernel log
with error messages.
* tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
====================
Merge tag 'drm-misc-fixes-2025-07-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc6 or final:
- Fix nouveau fail on debugfs errors.
- Magic 50 ms to fix nouveau suspend.
- Call rust destructor on drm device release.
- Fix DMA api error handling in tegra/nvdec.
- Fix PVR device reset.
- Habanalabs maintainer update.
- Small memory leak fix when nouveau acpi init fails.
- Do not attempt to bind to any PCI device with AGP capability.
- Make FB's acquire handles on backing object, same as i915/xe already does.
- Fix race in drm_gem_handle_create_tail.
Merge tag 'drm-xe-fixes-2025-07-11' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
Lucas De Marchi [Fri, 13 Jun 2025 20:00:37 +0000 (13:00 -0700)]
drm/xe/guc: Default log level to non-verbose
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
These workarounds are not applicable for use by the VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com> Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1d2e2503e506ddc499cbb7afdc8b70bcf6fe241f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Shuicheng Lin [Mon, 7 Jul 2025 00:49:14 +0000 (00:49 +0000)]
drm/xe: Release runtime pm for error path of xe_devcoredump_read()
xe_pm_runtime_put() is missed to be called for the error path in
xe_devcoredump_read().
Add function description comments for xe_devcoredump_read() to help
understand it.
v2: more detail function comments and refine goto logic (Matt)
Hangbin Liu [Wed, 9 Jul 2025 09:12:44 +0000 (09:12 +0000)]
selftests: net: lib: fix shift count out of range
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
When fixing IPv6 link-local address generation on GRE devices with
commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation."), I accidentally broke the default IPv6 multicast route
creation on these GRE devices.
Fix that in patch 1, making the GRE specific code yet a bit closer to
the generic code used by most other network interface types.
Then extend the selftest in patch 2 to cover this case.
====================
selftests: Add IPv6 multicast route generation tests for GRE devices.
The previous patch fixes a bug that prevented the creation of the
default IPv6 multicast route (ff00::/8) for some GRE devices. Now let's
extend the GRE IPv6 selftests to cover this case.
Also, rename check_ipv6_ll_addr() to check_ipv6_device_config() and
adapt comments and script output to take into account the fact that
we're not limited to link-local address generation.
Use addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config() so that we don't just get the inet6_dev, but also
install the default ff00::/8 multicast route.
Before commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation."), the multicast route was created at the end of the
function by addrconf_add_mroute(). But this code path is now only taken
in one particular case (gre devices not bound to a local IP address and
in EUI64 mode). For all other cases, the function exits early and
addrconf_add_mroute() is not called anymore.
Using addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config(), fixes the problem as it will create the default
multicast route for all gre devices. This also brings
addrconf_gre_config() a bit closer to the normal netdevice IPv6
configuration code (addrconf_dev_config()).
Cc: stable@vger.kernel.org Fixes: 3e6a0243ff00 ("gre: Fix again IPv6 link-local address generation.") Reported-by: Aiden Yang <ling@moedove.com> Closes: https://lore.kernel.org/netdev/CANR=AhRM7YHHXVxJ4DmrTNMeuEOY87K2mLmo9KMed1JMr20p6g@mail.gmail.com/ Reviewed-by: Gary Guo <gary@garyguo.net> Tested-by: Gary Guo <gary@garyguo.net> Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/027a923dcb550ad115e6d93ee8bb7d310378bd01.1752070620.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch series improves the reliability of the Microchip LAN88xx
PHYs, particularly in edge cases involving fixed link configurations or
forced speed modes.
Patch 1 assigns genphy_soft_reset() to the .soft_reset hook to ensure
that stale link partner advertisement (LPA) bits are properly cleared
during reconfiguration. Without this, outdated autonegotiation bits may
remain visible in some parallel detection cases.
Patch 2 restricts the 100 Mbps workaround (originally intended to handle
cable length switching) to only run when the link transitions to the
PHY_NOLINK state. This prevents repeated toggling that can confuse
autonegotiating link partners such as the Intel i350, leading to
unstable link cycles.
Both patches were tested on a LAN7850 (with integrated LAN88xx PHY)
against an Intel I350 NIC. The full test suite - autonegotiation, fixed
link, and parallel detection - passed successfully.
====================
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
Enable .soft_reset for the LAN88xx PHY driver by assigning
genphy_soft_reset() to ensure that the phylib core performs a proper
soft reset during reconfiguration.
Previously, the driver left .soft_reset unimplemented, so calls to
phy_init_hw() (e.g., from lan88xx_link_change_notify()) did not fully
reset the PHY. As a result, stale contents in the Link Partner Ability
(LPA) register could persist, causing the PHY to incorrectly report
that the link partner advertised autonegotiation even when it did not.
Using genphy_soft_reset() guarantees a clean reset of the PHY and
corrects the false autoneg reporting in these scenarios.
Fixes: ccb989e4d1ef ("net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250709130753.3994461-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mingming Cao [Wed, 9 Jul 2025 15:33:32 +0000 (08:33 -0700)]
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
The previous hardcoded definitions of NUM_RX_STATS and
NUM_TX_STATS were not updated when new fields were added
to the ibmvnic_{rx,tx}_queue_stats structures. Specifically,
commit 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx
batched") added a fourth TX stat, but NUM_TX_STATS remained 3,
leading to a mismatch.
This patch replaces the static defines with dynamic sizeof-based
calculations to ensure the stat arrays are correctly sized.
This fixes incorrect indexing and prevents incomplete stat
reporting in tools like ethtool.
Fixes: 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx batched") Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250709153332.73892-1-mmc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kito Xu [Wed, 9 Jul 2025 03:52:51 +0000 (03:52 +0000)]
net: appletalk: Fix device refcount leak in atrtr_create()
When updating an existing route entry in atrtr_create(), the old device
reference was not being released before assigning the new device,
leading to a device refcount leak. Fix this by calling dev_put() to
release the old device reference before holding the new one.
The armada-370-xp irqchip fails in some randconfig builds because
of a missing declaration:
In file included from drivers/irqchip/irq-armada-370-xp.c:23:
include/linux/irqchip/irq-msi-lib.h:25:39: error: 'struct msi_domain_info' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a forward declaration for the msi_domain_info structure.
[ tglx: Fixed up the subsystem prefix. Is it really that hard to get right? ]
Fixes: e51b27438a10 ("irqchip: Make irq-msi-lib.h globally available") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/20250710080021.2303640-1-arnd@kernel.org
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
pci_msix_write_tph_tag() takes the per device MSI descriptor mutex and then
invokes msi_domain_get_virq(), which takes the same mutex again. That
obviously results in a system hang which is exposed by a softlockup or
lockdep warning.
Move the lock guard after the invocation of msi_domain_get_virq() to fix
this.
[ tglx: Massage changelog by adding a proper explanation and removing the
not really useful stacktrace ]
Fixes: d5124a9957b2 ("PCI/MSI: Provide a sane mechanism for TPH") Reported-by: Jorge Lopez <jorge.jo.lopez@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jorge Lopez <jorge.jo.lopez@oracle.com> Link: https://lore.kernel.org/all/20250708222530.1041477-1-himanshu.madhani@oracle.com
Merge tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth:
- stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- rtsn: fix a null pointer dereference in rtsn_probe()"
* tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net/sched: sch_qfq: Fix null-deref in agg_dequeue
rxrpc: Fix oops due to non-existence of prealloc backlog struct
rxrpc: Fix bug due to prealloc collision
MAINTAINERS: remove myself as netronome maintainer
selftests/net: packetdrill: add tcp_ooo-before-and-after-accept.pkt
tcp: refine sk_rcvbuf increase for ooo packets
net/sched: Abort __tc_modify_qdisc if parent class does not exist
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
net: thunderx: avoid direct MTU assignment after WRITE_ONCE()
selftests/tc-testing: Create test case for UAF scenario with DRR/NETEM/BLACKHOLE chain
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atm: clip: Fix infinite recursive call of clip_push().
atm: clip: Fix memory leak of struct clip_vcc.
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
net: phy: smsc: Force predictable MDI-X state on LAN87xx
net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2
rxrpc: Fix over large frame size warning
net: airoha: Fix an error handling path in airoha_probe()
...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Many patches, pretty much all of them small, that accumulated while I
was on vacation.
ARM:
- Remove the last leftovers of the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host
on stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested
mode
x86:
- Reject SEV{-ES} intra-host migration if one or more vCPUs are
actively being created, so as not to create a non-SEV{-ES} vCPU in
an SEV{-ES} VM
- Use a pre-allocated, per-vCPU buffer for handling de-sparsification
of vCPU masks in Hyper-V hypercalls; fixes a "stack frame too
large" issue
- Allow out-of-range/invalid Xen event channel ports when configuring
IRQ routing, to avoid dictating a specific ioctl() ordering to
userspace
- Conditionally reschedule when setting memory attributes to avoid
soft lockups when userspace converts huge swaths of memory to/from
private
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest
- Add a missing field in struct sev_data_snp_launch_start that
resulted in the guest-visible workarounds field being filled at the
wrong offset
- Skip non-canonical address when processing Hyper-V PV TLB flushes
to avoid VM-Fail on INVVPID
- Advertise supported TDX TDVMCALLs to userspace
- Pass SetupEventNotifyInterrupt arguments to userspace
- Fix TSC frequency underflow"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: avoid underflow when scaling TSC frequency
KVM: arm64: Remove kvm_arch_vcpu_run_map_fp()
KVM: arm64: Fix handling of FEAT_GTG for unimplemented granule sizes
KVM: arm64: Don't free hyp pages with pKVM on GICv2
KVM: arm64: Fix error path in init_hyp_mode()
KVM: arm64: Adjust range correctly during host stage-2 faults
KVM: arm64: nv: Fix MI line level calculation in vgic_v3_nested_update_mi()
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
KVM: SVM: Add missing member in SNP_LAUNCH_START command structure
Documentation: KVM: Fix unexpected unindent warnings
KVM: selftests: Add back the missing check of MONITOR/MWAIT availability
KVM: Allow CPU to reschedule while setting per-page memory attributes
KVM: x86/xen: Allow 'out of range' event channel ports in IRQ routing table.
KVM: x86/hyper-v: Use preallocated per-vCPU buffer for de-sparsified vCPU masks
KVM: SVM: Initialize vmsa_pa in VMCB to INVALID_PAGE if VMSA page is NULL
KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight
KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities
KVM: TDX: Exit to userspace for SetupEventNotifyInterrupt
Sequence 2 - MIPI_SEQ_INIT_OTP
GPIO index 9, source 0, set 0 (0x00)
Delay: 50000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 6000 us
GPIO index 9, source 0, set 0 (0x00)
Delay: 6000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 25000 us
Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
...
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
Delay: 120000 us
Sequence 4 - MIPI_SEQ_DISPLAY_OFF
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
Delay: 105000 us
Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
Delay: 10000 us
Sequence 5 - MIPI_SEQ_ASSERT_RESET
Delay: 10000 us
GPIO index 9, source 0, set 0 (0x00)
Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
the fixup from vlv_fixup_mipi_sequences() fixes up.
Extend it to also apply to v2 sequences, this fixes the panel not working
on the Acer Iconia One 8 A1-840.
wifi: mac80211: add the virtual monitor after reconfig complete
In reconfig we add the virtual monitor in 2 cases:
1. If we are resuming (it was deleted on suspend)
2. If it was added after an error but before the reconfig
(due to the last non-monitor interface removal).
In the second case, the removal of the non-monitor interface will succeed
but the addition of the virtual monitor will fail, so we add it in the
reconfig.
The problem is that we mislead the driver to think that this is an existing
interface that is getting re-added - while it is actually a completely new
interface from the drivers' point of view.
Some drivers act differently when a interface is re-added. For example, it
might not initialize things because they were already initialized.
Such drivers will - in this case - be left with a partialy initialized vif.
To fix it, add the virtual monitor after reconfig_complete, so the
driver will know that this is a completely new interface.
This is currently not initialized for a virtual monitor, leading to a
NULL pointer dereference when - for example - iterating over all the
keys of all the vifs.
Xiang Mei [Sat, 5 Jul 2025 21:21:43 +0000 (14:21 -0700)]
net/sched: sch_qfq: Fix null-deref in agg_dequeue
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
In a quick slow device, readdir() may loop for long time in large
directory, let's give a chance to allow it to be interrupted by
userspace.
Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250710073619.4083422-1-chao@kernel.org
[ Gao Xiang: move cond_resched() to the end of the while loop. ] Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Flush the D-cache before unlocking folios for compressed inodes, as
they are dirtied during decompression.
Avoid calling flush_dcache_folio() on every CPU write, since it's more
like playing whack-a-mole without real benefit.
It has no impact on x86 and arm64/risc-v: on x86, flush_dcache_folio()
is a no-op, and on arm64/risc-v, PG_dcache_clean (PG_arch_1) is clear
for new page cache folios. However, certain ARM boards are affected,
as reported.
erofs: fix to add missing tracepoint in erofs_read_folio()
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readpage()
tracepoint in the meantime, let's add it back.
erofs: fix to add missing tracepoint in erofs_readahead()
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readahead()
tracepoint in the meantime, let's add it back.
This commit introduces per-memcg/task NUMA balance statistics, but
unfortunately it introduced a NULL pointer exception due to the following
race condition: After a swap task candidate was chosen, its mm_struct
pointer was set to NULL due to task exit. Later, when performing the
actual task swapping, the p->mm caused the problem.
CPU0 CPU1
:
...
task_numa_migrate
task_numa_find_cpu
task_numa_compare
# a normal task p is chosen
env->best_task = p
migrate_swap_stop
__migrate_swap_task((arg->src_task, arg->dst_cpu)
count_memcg_event_mm(p->mm, NUMA_TASK_SWAP)# p->mm is NULL
task_lock() should be held and the PF_EXITING flag needs to be checked to
prevent this from happening. After discussion, the conclusion was that
adding a lock is not worthwhile for some statistics calculations. Revert
the change and rely on the tracepoint for this purpose.
Link: https://lkml.kernel.org/r/20250704135620.685752-1-yu.c.chen@intel.com Link: https://lkml.kernel.org/r/20250708064917.BBD13C4CEED@smtp.kernel.org Fixes: ad6b26b6a0a7 ("sched/numa: add statistics of numa balance task") Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reported-by: Jirka Hladky <jhladky@redhat.com> Closes: https://lore.kernel.org/all/CAE4VaGBLJxpd=NeRJXpSCuw=REhC5LWJpC29kDy-Zh2ZDyzQZA@mail.gmail.com/ Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com> Reported-by: Suneeth D <Suneeth.D@amd.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Hladky <jhladky@redhat.com> Cc: Libo Chen <libo.chen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Thu, 5 Jun 2025 12:58:29 +0000 (20:58 +0800)]
mm: fix the inaccurate memory statistics issue for users
On some large machines with a high number of CPUs running a 64K pagesize
kernel, we found that the 'RES' field is always 0 displayed by the top
command for some processes, which will cause a lot of confusion for users.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
875525 root 20 0 12480 0 0 R 0.3 0.0 0:00.08 top
1 root 20 0 172800 0 0 S 0.0 0.0 0:04.52 systemd
The main reason is that the batch size of the percpu counter is quite
large on these machines, caching a significant percpu value, since
converting mm's rss stats into percpu_counter by commit f1a7941243c1 ("mm:
convert mm's rss stats into percpu_counter"). Intuitively, the batch
number should be optimized, but on some paths, performance may take
precedence over statistical accuracy. Therefore, introducing a new
interface to add the percpu statistical count and display it to users,
which can remove the confusion. In addition, this change is not expected
to be on a performance-critical path, so the modification should be
acceptable.
In addition, the 'mm->rss_stat' is updated by using add_mm_counter() and
dec/inc_mm_counter(), which are all wrappers around
percpu_counter_add_batch(). In percpu_counter_add_batch(), there is
percpu batch caching to avoid 'fbc->lock' contention. This patch changes
task_mem() and task_statm() to get the accurate mm counters under the
'fbc->lock', but this should not exacerbate kernel 'mm->rss_stat' lock
contention due to the percpu batch caching of the mm counters. The
following test also confirm the theoretical analysis.
I run the stress-ng that stresses anon page faults in 32 threads on my 32
cores machine, while simultaneously running a script that starts 32
threads to busy-loop pread each stress-ng thread's /proc/pid/status
interface. From the following data, I did not observe any obvious impact
of this patch on the stress-ng tests.
w/o patch:
stress-ng: info: [6848] 4,399,219,085,152 CPU Cycles 67.327 B/sec
stress-ng: info: [6848] 1,616,524,844,832 Instructions 24.740 B/sec (0.367 instr. per cycle)
stress-ng: info: [6848] 39,529,792 Page Faults Total 0.605 M/sec
stress-ng: info: [6848] 39,529,792 Page Faults Minor 0.605 M/sec
w/patch:
stress-ng: info: [2485] 4,462,440,381,856 CPU Cycles 68.382 B/sec
stress-ng: info: [2485] 1,615,101,503,296 Instructions 24.750 B/sec (0.362 instr. per cycle)
stress-ng: info: [2485] 39,439,232 Page Faults Total 0.604 M/sec
stress-ng: info: [2485] 39,439,232 Page Faults Minor 0.604 M/sec
On comparing a very simple app which just allocates & touches some
memory against v6.1 (which doesn't have f1a7941243c1) and latest Linus
tree (4c06e63b9203) I can see that on latest Linus tree the values for
VmRSS, RssAnon and RssFile from /proc/self/status are all zeroes while
they do report values on v6.1 and a Linus tree with this patch.
Link: https://lkml.kernel.org/r/f4586b17f66f97c174f7fd1f8647374fdb53de1c.1749119050.git.baolin.wang@linux.alibaba.com Fixes: f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by Donet Tom <donettom@linux.ibm.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Honggyu Kim [Wed, 2 Jul 2025 00:02:04 +0000 (09:02 +0900)]
mm/damon: fix divide by zero in damon_get_intervals_score()
The current implementation allows having zero size regions with no special
reasons, but damon_get_intervals_score() gets crashed by divide by zero
when the region size is zero.
This patch fixes the bug, but does not disallow zero size regions to keep
the backward compatibility since disallowing zero size regions might be a
breaking change for some users.
In addition, the same crash can happen when intervals_goal.access_bp is
zero so this should be fixed in stable trees as well.
Link: https://lkml.kernel.org/r/20250702000205.1921-5-honggyu.kim@sk.com Fixes: f04b0fedbe71 ("mm/damon/core: implement intervals auto-tuning") Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Honggyu Kim [Wed, 2 Jul 2025 00:02:02 +0000 (09:02 +0900)]
samples/damon: fix damon sample wsse for start failure
The damon_sample_wsse_start() can fail so we must reset the "enable"
parameter to "false" again for proper rollback.
In such cases, setting Y to "enable" then N triggers the similar crash
with wsse because damon sample start failed but the "enable" stays as Y.
Link: https://lkml.kernel.org/r/20250702000205.1921-3-honggyu.kim@sk.com Fixes: b757c6cfc696 ("samples/damon/wsse: start and stop DAMON as the user requests") Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Illia Ostapyshyn [Sun, 29 Jun 2025 00:38:11 +0000 (02:38 +0200)]
scripts: gdb: vfs: support external dentry names
d_shortname of struct dentry only reserves D_NAME_INLINE_LEN characters
and contains garbage for longer names. Use d_name instead, which always
references the valid name.
Link: https://lore.kernel.org/all/20250525213709.878287-2-illia@yshyn.com/ Link: https://lkml.kernel.org/r/20250629003811.2420418-1-illia@yshyn.com Fixes: 79300ac805b6 ("scripts/gdb: fix dentry_name() lookup") Signed-off-by: Illia Ostapyshyn <illia@yshyn.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christoph Berg [Tue, 24 Jun 2025 14:44:27 +0000 (16:44 +0200)]
mm/migrate: fix do_pages_stat in compat mode
For arrays with more than 16 entries, the old code would incorrectly
advance the pages pointer by 16 words instead of 16 compat_uptr_t. Fix by
doing the pointer arithmetic inside get_compat_pages_array where pages32
is already a correctly-typed pointer.
Discovered while working on PostgreSQL 18's new NUMA introspection code.
Link: https://lkml.kernel.org/r/aGREU0XTB48w9CwN@msg.df7cb.de Fixes: 5b1b561ba73c ("mm: simplify compat_sys_move_pages") Signed-off-by: Christoph Berg <myon@debian.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Reported-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com> Reported-by: Tomas Vondra <tomas@vondra.me> Closes: https://www.postgresql.org/message-id/flat/6342f601-77de-4ee0-8c2a-3deb50ceac5b%40vondra.me#86402e3d80c031788f5f55b42c459471 Cc: Alistair Popple <apopple@nvidia.com> Cc: Byungchul Park <byungchul@sk.com> Cc: Gregory Price <gourry@gourry.net> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Mathew Brost <matthew.brost@intel.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / thirdparty / kernel / linux.git / log
