sd-bus: free everything when bus_set_address_user fails (#6552)
Fixes:
```
$ env -i valgrind --leak-check=full ./build/test-bus-chat
...
==7763== 1,888 (1,824 direct, 64 indirect) bytes in 1 blocks are
definitely lost in loss record 2 of 2
==7763== at 0x4C2FA50: calloc (vg_replace_malloc.c:711)
==7763== by 0x4F8FF9A: sd_bus_new (sd-bus.c:175)
==7763== by 0x4F938BF: sd_bus_open_user (sd-bus.c:1138)
==7763== by 0x109ACD: server_init (test-bus-chat.c:70)
==7763== by 0x10BCF8: main (test-bus-chat.c:526)
==7763==
```
Luca Bruno [Sun, 6 Aug 2017 13:24:24 +0000 (13:24 +0000)]
core: evaluate presets after generators have run (#6526)
This commit moves the first-boot system preset-settings evaluation out
of main and into the manager startup logic itself. Notably, it reverses
the order between generators and presets evaluation, so that any changes
performed by first-boot generators are taken into the account by presets
logic.
After this change, units created by a generator can be enabled as part
of a preset.
I hit a test failure with the `max_gid+1` test. Problem is that we loop
over 0..r, but set `r` again within the loop (to 1). So max_gid is only
set based on the first supplementary GID.
dkg [Sat, 5 Aug 2017 23:19:09 +0000 (19:19 -0400)]
man: document socket requirement for systemd-socket-proxyd (#6535)
Without this requirement, if proxy-to-nginx.socket was down, and the sysadmin
were to do:
systemctl start proxy-to-nginx.service
then the service would come up without a configured socket, which doesn't make
sense. Normally this isn't how we expect a socket-activated service to start,
but it's possible for an admin to do this (if the .socket were already running,
the systemd-socket-proxyd process will start effectively idle). But the
.service shouldn't end up in a broken state if the .socket isn't already
listening.
Adding the explicit Requires: should ensure that an admin with this
configuration state can't accidentally break their system.
Martin Pitt [Fri, 4 Aug 2017 12:34:14 +0000 (14:34 +0200)]
test: Factorize common integration test functions (#6540)
All test/TEST* but TEST-02-CRYPTSETUP share the same check_result_qemu()
and test_cleanup(), so move them into test_functions and only override
them in TEST-02-CRYPTSETUP.
Also provide a common test_run() which by default assumes that both QEMU
and nspawn tests are run. Particular tests which don't support either
need to explicitly opt out by setting $TEST_NO_{QEMU,NSPAWN}. Do it this
way around to avoid accidentally forgetting to opt in, and to encourage
test authors to at least always support nspawn.
resolved,nss-myhostname: use _gateway for the gateway
This changes the symbolic name for the default gateway from "gateway" to
"_gateway". A new configuration option -Dcompat-gateway-hostname=true|false
is added. If it is set, the old name is also supported, but the new name
is used as the canonical name in either case. This is intended as a temporary
measure to make the transition easier, and the option should be removed
after a few releases, at which point only the new name will be used.
The old "gateway" name mostly works OK, but hasn't gained widespread acceptance
because of the following (potential) conflicts:
- it is completely legal to have a host called "gateway"
- there is no guarantee that "gateway" will not be registered as a TLD, even
though this currently seems unlikely. (Even then, there would be no
conflict except for the case when the top-level domain itself was being resolved.
The "gateway" or "_gateway" labels have only special meaning when the
whole name consists of a single label, so resolution of any subdomain
of the hypothetical gateway. TLD would still work OK. )
Moving to "_gateway" avoids those issues because underscores are not allowed
in host names (RFC 1123, §2.1) and avoids potential conflicts with local or
global names.
v2:
- simplify the logic to hardcode "_gateway" and allow
-Dcompat-gateway-hostname=true as a temporary measure.
alloc-util: add new helpers memdup_suffix0() and newdup_suffix0()
These are similar to memdup() and newdup(), but reserve one extra NUL
byte at the end of the new allocation and initialize it. It's useful
when copying out data from fixed size character arrays where NUL
termination can't be assumed.
execute: don't pass unit ID in --user mode to journald for stream logging
When we create a log stream connection to journald, we pass along the
unit ID. With this change we do this only when we run as system
instance, not as user instance, to remove the ambiguity whether a user
or system unit is specified. The effect of this change is minor:
journald ignores the field anyway from clients with UID != 0. This patch
hence only fixes the unit attribution for the --user instance of the
root user.
Checking for validity of a PID is relatively easy, but let's add a
helper cal for this too, in order to make things more readable and more
similar to uid_is_valid(), gid_is_valid() and friends.
audit: introduce audit_session_is_valid() and make use of it everywhere
Let's add a proper validation function, since validation isn't entirely
trivial. Make use of it where applicable. Also make use of
AUDIT_SESSION_INVALID where we need a marker for an invalid audit
session.
The long man page paragraph got it right: the tool is for escaping systemd unit
names, not just system unit names. Also fix the short man page paragraph
and the --help text.
Nicolas Iooss [Mon, 31 Jul 2017 15:45:33 +0000 (17:45 +0200)]
namespace: keep selinuxfs mounted read-write with ProtectKernelTunables (#5741)
When a service unit uses "ProtectKernelTunables=yes", it currently
remounts /sys/fs/selinux read-only. This makes libselinux report SELinux
state as "disabled", because most SELinux features are not usable. For
example it is not possible to validate security contexts (with
security_check_context_raw() or /sys/fs/selinux/context). This behavior
of libselinux has been described in
http://danwalsh.livejournal.com/73099.html and confirmed in a recent
email, https://marc.info/?l=selinux&m=149220233032594&w=2 .
Since commit 0c28d51ac849 ("units: further lock down our long-running
services"), systemd-localed unit uses ProtectKernelTunables=yes.
Nevertheless this service needs to use libselinux API in order to create
/etc/vconsole.conf, /etc/locale.conf... with the right SELinux contexts.
This is broken when /sys/fs/selinux is mounted read-only in the mount
namespace of the service.
Make SELinux-aware systemd services work again when they are using
ProtectKernelTunables=yes by keeping selinuxfs mounted read-write.
core: Do not fail perpetual mount units without fragment (#6459)
mount_load does not require fragment files to be present in order to
load mount units which are perpetual, or come from /proc/self/mountinfo.
mount_verify should do the same, otherwise a synthesized '-.mount' would
be marked as failed with "No such file or directory", as it is perpetual
but not marked to come from /proc/self/mountinfo at this point.
This happens for the user instance, and I suspect it was the cause of #5375
for the system instance, without gpt-generator.
core: properly handle deserialization of unknown unit types (#6476)
We just abort startup, without printing any error. Make sure we always
print something, and when we cannot deserialize some unit, just ignore it and
continue.
rescue.target does not work well, and we don't have a suitable emergency
shell unit that can be started on existing systems right now. So let's just
remove the recommendation for now.
journal-remote: use MHD_OPTION_STRICT_FOR_CLIENT if MHD_USE_PEDANTIC_CHECKS is deprecated
The option MHD_OPTION_STRICT_FOR_CLIENT is provided since libmicrohttpd-0.9.54, and
MHD_USE_PEDANTIC_CHECKS will be deprecated in future.
This makes support both option.
journal-gateway: use MHD_USE_POLL_INTERNAL_THREAD instead of MHD_USE_POLL
The option MHD_USE_THREAD_PER_CONNECTION requires MHD_USE_POLL_INTERNAL_THREAD
since libmicrohttpd-0.9.53.
If MHD_USE_POLL is used instead of MHD_USE_POLL_INTERNAL_THREAD, then
the library outputs the following warning:
```
Warning: MHD_USE_THREAD_PER_CONNECTION must be used only with
MHD_USE_INTERNAL_POLLING_THREAD. Flag MHD_USE_INTERNAL_POLLING_THREAD was added.
Consider setting MHD_USE_INTERNAL_POLLING_THREAD explicitly.
```
The option MHD_USE_POLL_INTERNAL_THREAD is defined as
`MHD_USE_POLL_INTERNAL_THREAD = MHD_USE_POLL | MHD_USE_INTERNAL_POLLING_THREAD,`
So, let's use MHD_USE_POLL_INTERNAL_THREAD instead of MHD_USE_POLL.
the number of the suggestions matches one the function returns.
For consistency with the other internal functions, it should use the first argument
instead of the global variable $mode.
[zj: add commit message to make it sound like we know what we're doing]
README: document that max_bonds=0 is the way to go for bonding.ko
Everything else just is annoying, hence let's list this among the
requirements we make on the kernel in order to minimize confusion
leading to #6184 and suchlike.
DISTRO_PORTING: document that distros may/should change fallback DNS as well as fallback NTP if they wish
The DNS and NTP fallback server situation is pretty similar, and
downstream distros might want to change both to whatever they need,
hence mention them both.
This was done autogen.sh previously and was dropped in 72cdb3e783174dcf9223a49f03e3b0e2ca95ddb8. Let's add it back.
The meson configuration step is the only reasonable place.
Note that this only works for the most standard git dirs, e.g.
the hook will not be installed if git worktree is used or if
$GIT_DIR is specified, etc. I think that's OK because most of
the time meson will be run at least once in the original cloned
dir.
Some kdbus_flag and memfd related parts are left behind, because they
are entangled with the "legacy" dbus support.
test-bus-benchmark is switched to "manual". It was already broken before
(in the non-kdbus mode) but apparently nobody noticed. Hopefully it can
be fixed later.
Since busname units are only useful with kdbus, they weren't actively
used. This was dead code, only compile-tested. If busname units are
ever added back, it'll be cleaner to start from scratch (possibly reverting
parts of this patch).
When we add another name to a unit (by following an alias), we need to
reload all drop-ins. This is necessary to load any additional dropins
found in the dirs created from the alias name.
resolved: make sure idn2 conversions are roundtrippable
While working on the gateway→_gateway conversion, I noticed that
libidn2 strips the leading underscore in some names.
https://gitlab.com/libidn/libidn2/issues/30 was resolved in
https://gitlab.com/libidn/libidn2/commit/05d753ea69e2308cd02436d0511f4b844071dc79,
which disabled "STD3 ASCII rules" by default, i.e. disabled stripping
of underscores. So the situation is that with previously released libidn2
versions we would get incorrect behaviour, and once new libidn2 is released,
we should be OK.
Let's implement a simple test which checks that the name survives the
roundtrip, and if it doesn't, skip IDN resolution. Under old libidn2 this will
fail in more cases, and under new libidn2 in fewer, but should be the right
thing to do also under new libidn2.
tree-wide: fput[cs]() → fput[cs]_unlocked() wherever that makes sense (#6396)
As a follow-up for db3f45e2d2586d78f942a43e661415bc50716d11 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
nspawn: downgrade warning when we get sd_notify() message from unexpected process (#6416)
Given that we set NOTIFY_SOCKET unconditionally it's not surprising that
processes way down the process tree think it's smart to send us a
notification message.
It's still useful to keep this message, for debugging things, but it
shouldn't be generated by default.
tree-wide: make use of getpid_cached() wherever we can
This moves pretty much all uses of getpid() over to getpid_raw(). I
didn't specifically check whether the optimization is worth it for each
replacement, but in order to keep things simple and systematic I
switched over everything at once.
Harald Hoyer [Thu, 20 Jul 2017 17:13:09 +0000 (19:13 +0200)]
call chase_symlinks without the /sysroot prefix (#6411)
In case fstab-generator is called in the initrd, chase_symlinks()
returns with a canonical path "/sysroot/sysroot/<mountpoint>", if the
"/sysroot" prefix is present in the path.
This patch skips the "/sysroot" prefix for the chase_symlinks() call,
because "/sysroot" is already the root directory and chase_symlinks()
prepends the root directory in the canonical path returned.
projects / thirdparty / systemd.git / log
