Merge tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verification updates from Steven Rostedt:
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page
faults, or may be blocked trying to take a mutex without priority
inheritance.
However, while attempting to implement DA monitors for these
real-time rules, deterministic automaton is found to be inappropriate
as the specification language. The automaton is complicated, hard to
understand, and error-prone.
For these cases, linear temporal logic is found to be more suitable.
The LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them
visible for the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with
real-time applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on
risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling
preemption"
* tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (48 commits)
rv: Add opid per-cpu monitor
rv: Add nrp and sssw per-task monitors
rv: Replace tss and sncid monitors with more complete sts
sched: Adapt sched tracepoints for RV task model
rv: Retry when da monitor detects race conditions
rv: Adjust monitor dependencies
rv: Use strings in da monitors tracepoints
rv: Remove trailing whitespace from tracepoint string
rv: Add da_handle_start_run_event_ to per-task monitors
rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
rv: Fix wrong type cast in monitors_show()
rv: Remove struct rv_monitor::reacting
rv: Remove rv_reactor's reference counter
rv: Merge struct rv_reactor_def into struct rv_reactor
rv: Merge struct rv_monitor_def into struct rv_monitor
rv: Remove unused field in struct rv_monitor_def
rv: Return init error when registering monitors
verification/rvgen: Organise Kconfig entries for nested monitors
tools/dot2c: Fix generated files going over 100 column limit
tools/rv: Stop gracefully also on SIGTERM
...
Merge tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Rewind persistent ring buffer on boot
When the persistent ring buffer is being used for live kernel tracing
and the system crashes, the tool that is reading the trace may not
have recorded the data when the system crashed.
Although the persistent ring buffer still has that data, when reading
it after a reboot, it will start where it left off. That is, what was
read will not be accessible.
Instead, on reboot, have the persistent ring buffer restart where the
data starts and this will allow the tooling to recover what was lost
when the crash occurred.
- Remove the ring_buffer_read_prepare_sync() logic
Reading the trace file required stopping writing to the ring buffer
as the trace file is only an iterator and does not consume what it
read. It was originally not safe to read the ring buffer in this mode
and required disabling writing. The ring_buffer_read_prepare_sync()
logic was used to stop each per_cpu ring buffer, call
synchronize_rcu() and then start the iterator. This was used instead
of calling synchronize_rcu() for each per_cpu buffer.
Today, the iterator has been updated where it is safe to read the
trace file while writing to the ring buffer is still occurring. There
is no more need to do this synchronization and it is causing large
delays on machines with many CPUs. Remove this unneeded
synchronization.
- Make static string array a constant in show_irq_str()
Making the string array into a constant has shown to decrease code
text/data size.
* tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Make the const read-only 'type' static
ring-buffer: Remove ring_buffer_read_prepare_sync()
tracing: ring_buffer: Rewind persistent ring buffer on reboot
Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
The above sets the variable "PATCH_START" to HEAD~1 and the
OUTPUT_DIR option to "/work/build/urgent".
This is useful because currently the only way to make a slight change
to a config file is by modifying that config file. For one time
changes, this can be annoying. Having a way to do a one time override
from the command line simplifies the workflow.
Temp variables (PATCH_START) will override every temp variable in the
config file, whereas options will act like a normal OVERRIDE option
and will only affect the session they define.
-DBUILD_OUTPUT=/work/git/linux.git
Replaces the default BUILD_OUTPUT option.
'-DBUILD_OUTPUT[2]=/work/git/linux.git'
Only replaces the BUILD_OUTPUT variable for test #2.
- If an option contains itself, just drop it instead of going into an
infinite loop and failing to parse (it doesn't crash, it detects the
recursion after 100 iterations anyway).
Some configs may define a variable with the same name as the option:
ADD_CONFIG := $(ADD_CONFIG)
But if the option doesn't exist, it the above will fail to parse. In
these cases, just ignore evaluating the option inside the definition
of another option if it has the same name.
- Display the BUILD_DIR and OUTPUT_DIR options at the start of every
test
It is useful to know which kernel source and what destination a test
is using when it starts, in case a mistake is made. This makes it
easier to abort the test if the wrong source or destination is being
used instead of waiting until the test completes.
- Add new PATCHCHECK_SKIP option
When testing a series of commits that also includes changes to the
Linux tools directory, it is useless to test the changes in tools as
they may not affect the kernel itself. Doing tests on the kernel for
changes that do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be
skipped while doing the individual commit tests.
* tag 'ktest-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits
ktest.pl: Always display BUILD_DIR and OUTPUT_DIR at the start of tests
ktest.pl: Prevent recursion of default variable options
ktest.pl: Have -D option work without a space
ktest.pl: Allow command option -D to override temp variables
ktest.pl: Add -D option to override options
Merge tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
Merge tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Fix a potential infinite recursion in fprobe by using preempt_*_notrace()
* tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
Merge tag 'bootconfig-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- tools/bootconfig:
- Fix unaligned access when building footer to avoid SIGBUS
- Cleanup bootconfig footer size calculations
- test scripts:
- Fix to add shebang for a test script
- Improve script portability using portable commands
- Improve script portability using printf instead of echo
- Enclose regex with quotes for syntax highlighter
* tag 'bootconfig-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix unaligned access when building footer
tools/bootconfig: scripts/ftrace.sh was missing the shebang line, so added it
tools/bootconfig: Cleanup bootconfig footer size calculations
tools/bootconfig: Replace some echo with printf for more portability
tools/bootconfig: Improve portability
tools: bootconfig: Regex enclosed with quotes to make syntax highlight proper
Merge tag 'slab-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Convert struct slab to its own flags instead of referencing page
flags, which is another preparation step before separating it from
struct page completely.
Along with that, a bunch of documentation fixes and cleanups (Matthew
Wilcox)
- Convert large kmalloc to use frozen pages in order to be consistent
with non-large kmalloc slabs (Vlastimil Babka)
- MAINTAINERS updates (Matthew Wilcox, Lorenzo Stoakes)
- Restore NUMA policy support for large kmalloc, broken by mistake in
v6.1 (Vlastimil Babka)
* tag 'slab-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
MAINTAINERS: add missing files to slab section
slab: Update MAINTAINERS entry
memcg_slabinfo: Fix use of PG_slab
kfence: Remove mention of PG_slab
vmcoreinfo: Remove documentation of PG_slab and PG_hugetlb
doc: Add slab internal kernel-doc
slub: Fix a documentation build error for krealloc()
slab: Add SL_pfmemalloc flag
slab: Add SL_partial flag
slab: Rename slab->__page_flags to slab->flags
doc: Move SLUB documentation to the admin guide
mm, slab: use frozen pages for large kmalloc
mm, slab: restore NUMA policy support for large kmalloc
Merge tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Expedited grace period updates:
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization
- Remove superfluous barrier in task unblock path
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU
Core:
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU
- Handle ->defer_qs_iw_pending field data race
- Enable rcu_normal_wake_from_gp by default on systems with <= 16
CPUs
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls
- Refactor expedited handling condition in rcu_read_unlock_special()
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs
torture-scripts:
- Cleanup and improve scripts : remove superfluous warnings for
disabled tests; better handling of kvm.sh --kconfig arg; suppress
some confusing diagnostics; tolerate bad kvm.sh args; add new
diagnostic for build output; fail allmodconfig testing on warnings
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels
- Disable default RCU-tasks and clocksource-wdog testing on arm64
- Add EXPERT Kconfig option for arm64 KCSAN runs
- Remove SRCU-lite testing
rcutorture:
- Start torture writer threads creation after reader threads to
handle race in SRCU-P scenario
- Add SRCU down_read()/up_read() test
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(),
print number of up/down readers and the number of such readers
which migrated to other CPU
- Ignore certain unsupported configurations for trivial RCU test
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context
- Enable checks and logs to capture intentionally exercised
unexpected scenarios (too short readers) for BUSTED test
- Remove SRCU-lite testing
srcu:
- Expedite SRCU-fast grace periods
- Remove SRCU-lite implementation
- Add guards for SRCU-fast readers
rcu nocb:
- Dump NOCB group leader state on stall detection
- Robustify nocb_cb_kthread pointer accesses
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled
refscale:
- Fix multiplication overflow in "loops" and "nreaders" calculations"
* tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (49 commits)
rcu: Document concurrent quiescent state reporting for offline CPUs
rcu: Document separation of rcu_state and rnp's gp_seq
rcu: Document GP init vs hotplug-scan ordering requirements
srcu: Add guards for SRCU-fast readers
rcu: Fix delayed execution of hurry callbacks
rcu: Refactor expedited handling check in rcu_read_unlock_special()
checkpatch: Remove SRCU-lite deprecation
srcu: Remove SRCU-lite implementation
srcu: Expedite SRCU-fast grace periods
rcutorture: Remove support for SRCU-lite
rcutorture: Remove SRCU-lite scenarios
torture: Remove support for SRCU-lite
torture: Make torture.sh --allmodconfig testing fail on warnings
torture: Add "ERROR" diagnostic for testing kernel-build output
torture: Make torture.sh tolerate runs having bad kvm.sh arguments
torture: Add textid.txt file to --do-allmodconfig and --do-rcu-rust runs
torture: Extract testid.txt generation to separate script
torture: Suppress "find" diagnostics from torture.sh --do-none run
torture: Provide EXPERT Kconfig option for arm64 KCSAN torture.sh runs
rcu: Fix rcu_read_unlock() deadloop due to IRQ work
...
Merge tag 'iommu-updates-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Remove the 'pgsize_bitmap' member from 'struct iommu_ops'
- Convert the x86 drivers over to msi_create_parent_irq_domain()
AMD-Vi:
- Add support for examining driver/device internals via debugfs
- Add support for "HATDis" to disable host translation when it is not
supported
- Add support for limiting the maximum host translation level based
on EFR[HATS]
Apple DART:
- Don't enable as built-in by default when ARCH_APPLE is selected
Arm SMMU:
- Devicetree bindings update for the Qualcomm SMMU in the "Milos" SoC
- Support for Qualcomm SM6115 MDSS parts
- Disable PRR on Qualcomm SM8250 as using these bits causes the
hypervisor to explode
Intel VT-d:
- Reorganize Intel VT-d to be ready for iommupt
- Optimize iotlb_sync_map for non-caching/non-RWBF modes
- Fix missed PASID in dev TLB invalidation in cache_tag_flush_all()
Mediatek:
- Fix build warnings when W=1
Samsung Exynos:
- Add support for reserved memory regions specified by the bootloader
TI OMAP:
- Use syscon_regmap_lookup_by_phandle_args() instead of parsing the
node manually
Misc:
- Cleanups and minor fixes across the board"
* tag 'iommu-updates-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Fix UAF on sva unbind with pending IOPFs
iommu/vt-d: Make iotlb_sync_map a static property of dmar_domain
dt-bindings: arm-smmu: Remove sdm845-cheza specific entry
iommu/amd: Fix geometry.aperture_end for V2 tables
iommu/amd: Wrap debugfs ABI testing symbols snippets in literal code blocks
iommu/amd: Add documentation for AMD IOMMU debugfs support
iommu/amd: Add debugfs support to dump IRT Table
iommu/amd: Add debugfs support to dump device table
iommu/amd: Add support for device id user input
iommu/amd: Add debugfs support to dump IOMMU command buffer
iommu/amd: Add debugfs support to dump IOMMU Capability registers
iommu/amd: Add debugfs support to dump IOMMU MMIO registers
iommu/amd: Refactor AMD IOMMU debugfs initial setup
dt-bindings: arm-smmu: document the support on Milos
iommu/exynos: add support for reserved regions
iommu/arm-smmu: disable PRR on SM8250
iommu/arm-smmu-v3: Revert vmaster in the error path
iommu/io-pgtable-arm: Remove unused macro iopte_prot
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
iommu/qcom: Fix pgsize_bitmap
...
- Introduce Strongly Connected Component (SCC) in the verifier to
detect loops and refine register liveness (Eduard Zingerman)
- Allow 'void *' cast using bpf_rdonly_cast() and corresponding
'__arg_untrusted' for global function parameters (Eduard Zingerman)
- Improve precision for BPF_ADD and BPF_SUB operations in the verifier
(Harishankar Vishwanathan)
- Teach the verifier that constant pointer to a map cannot be NULL
(Ihor Solodrai)
- Introduce BPF streams for error reporting of various conditions
detected by BPF runtime (Kumar Kartikeya Dwivedi)
- Teach the verifier to insert runtime speculation barrier (lfence on
x86) to mitigate speculative execution instead of rejecting the
programs (Luis Gerhorst)
- Various improvements for 'veristat' (Mykyta Yatsenko)
- For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
improve bug detection by syzbot (Paul Chaignon)
- Support BPF private stack on arm64 (Puranjay Mohan)
- Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
node (Song Liu)
- Introduce kfuncs for read-only string opreations (Viktor Malik)
- Implement show_fdinfo() for bpf_links (Tao Chen)
- Implement mprog API for cgroup-bpf programs (Yonghong Song)
* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
bpf: Add log for attaching tracing programs to functions in deny list
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
bpf: Fix various typos in verifier.c comments
bpf: Add third round of bounds deduction
selftests/bpf: Test invariants on JSLT crossing sign
selftests/bpf: Test cross-sign 64bits range refinement
selftests/bpf: Update reg_bound range refinement logic
bpf: Improve bounds when s64 crosses sign boundary
bpf: Simplify bounds refinement from s32
selftests/bpf: Enable private stack tests for arm64
bpf, arm64: JIT support for private stack
bpf: Move bpf_jit_get_prog_name() to core.c
bpf, arm64: Fix fp initialization for exception boundary
umd: Remove usermode driver framework
bpf/preload: Don't select USERMODE_DRIVER
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
selftests/bpf: Increase xdp data size for arm64 64K page size
...
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
Merge tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Notably, this contains the fix for for the GCC __init mess I created
with the kstack_erase annotations.
- staging: media: atomisp: Fix stack buffer overflow in
gmin_get_var_int().
I was asked to carry this fix, so here it is. :)
- fortify: Fix incorrect reporting of read buffer size
- kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
- compiler_types: Provide __no_kstack_erase to disable coverage only
on Clang"
* tag 'hardening-v6.17-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
fortify: Fix incorrect reporting of read buffer size
kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
Merge tag 'uml-for-linux-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull uml updates from Johannes Berg:
"Mostly cleanups, except:
- dynamic addition of vfio passthrough devices
- implementation of HAVE_SYSCALL_TRACEPOINTS"
* tag 'uml-for-linux-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Replace __ASSEMBLY__ with __ASSEMBLER__ in the usermode headers
um: Stop tracking stub's PID via userspace_pid[]
um: Remove the pid parameter of handle_trap()
um: Use err consistently in userspace()
um: vfio: Support adding devices via mconsole
um: rtc: Avoid shadowing err in uml_rtc_start()
um: Avoid redefining ARCH_HAS_CACHE_LINE_SIZE
um: Make mm_list and mm_list_lock static
um: Make unscheduled_userspace_iterations static
um: Re-evaluate thread flags repeatedly
um: simplify syscall header files
um/ptrace: Implement HAVE_SYSCALL_TRACEPOINTS
um/x86: Add system call table to header file
um: virt-pci: Switch to msi_create_parent_irq_domain()
um: virtio_pcidev: Rename UM_PCI_STAT_WAITING
Merge tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani,
Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras,
Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas
Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao
Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh
Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar
Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois.
* tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
arch/powerpc: Remove .interp section in vmlinux
powerpc: Drop GPL boilerplate text with obsolete FSF address
powerpc: Don't use %pK through printk
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions
integrity/platform_certs: Allow loading of keys in the static key management mode
powerpc/secvar: Expose secvars relevant to the key management mode
powerpc/pseries: Correct secvar format representation for static key management
(powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer
powerpc: floppy: Add missing checks after DMA map
book3s64/radix : Optimize vmemmap start alignment
book3s64/radix : Handle error conditions properly in radix_vmemmap_populate
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits
powerpc: sysdev: use lock guard for mutex
powerpc: powernv: ocxl: use lock guard for mutex
powerpc: book3s: vas: use lock guard for mutex
powerpc: fadump: use lock guard for mutex
powerpc: rtas: use lock guard for mutex
powerpc: eeh: use lock guard for mutex
...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
Merge tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- ptdescs conversions
- Fix lost column on the graphical debug console
- Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
- Miscellaneous fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: mac: Improve clocksource driver commentary
m68k: defconfig: Update defconfigs for v6.16-rc2
m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
m68k: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
m68k: Enable dead code elimination
m68k: Don't unregister boot console needlessly
m68k: Remove unused "cursor home" code from debug console
m68k: Avoid pointless recursion in debug console rendering
m68k: Fix lost column on framebuffer debug console
m68k: mm: Convert pointer table macros to use ptdescs
m68k: mm: Convert init_pointer_table() to use ptdescs
m68k: mm: Convert free_pointer_table() to use ptdescs
m68k: mm: Convert get_pointer_table() to use ptdescs
Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
Merge tag 'x86-platform-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"This adds support for the AMD hardware feedback interface (HFI), by
Perry Yuan"
* tag 'x86-platform-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/itmt: Add debugfs file to show core priorities
platform/x86/amd: hfi: Add debugfs support
platform/x86/amd: hfi: Set ITMT priority from ranking data
cpufreq/amd-pstate: Disable preferred cores on designs with workload classification
x86/process: Clear hardware feedback history for AMD processors
platform/x86: hfi: Add power management callback
platform/x86: hfi: Add online and offline callback support
platform/x86: hfi: Init per-cpu scores for each class
platform/x86: hfi: Parse CPU core ranking data from shared memory
platform/x86: hfi: Introduce AMD Hardware Feedback Interface Driver
x86/msr-index: Add AMD workload classification MSRs
MAINTAINERS: Add maintainer entry for AMD Hardware Feedback Driver
Documentation/x86: Add AMD Hardware Feedback Interface documentation
Merge tag 'x86-fpu-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU updates from Ingo Molnar:
- Most of the changes are related to the implementation of CET
supervisor state support for guests, and its preparatory changes
(Chao Gao)
- Improve/fix the debug output for unexpected FPU exceptions (Dave
Hansen)
* tag 'x86-fpu-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Delay instruction pointer fixup until after warning
x86/fpu/xstate: Add CET supervisor xfeature support as a guest-only feature
x86/fpu/xstate: Introduce "guest-only" supervisor xfeature set
x86/fpu: Remove xfd argument from __fpstate_reset()
x86/fpu: Initialize guest fpstate and FPU pseudo container from guest defaults
x86/fpu: Initialize guest FPU permissions from guest defaults
x86/fpu/xstate: Differentiate default features for host and guest FPUs
Merge tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Implement support for embedding EFI SBAT data (Secure Boot Advanced
Targeting: a secure boot image revocation facility) on x86 (Vitaly
Kuznetsov)
- Move the efi_enter_virtual_mode() initialization call from the
generic init code to x86 init code (Alexander Shishkin)
* tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Implement support for embedding SBAT data for x86
x86/efi: Move runtime service initialization to arch/x86
Merge tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers that didn't
check the return code (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the internal APIs
to local variables (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up. (Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)"
* tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization
locking/mutex: Remove redundant #ifdefs
locking/lockdep: Change 'static const' variables to enum values
locking/lockdep: Avoid struct return in lock_stats()
locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE
rust: sync: Add #[must_use] to Lock::try_lock()
locking/mutex: Mark devm_mutex_init() as __must_check
leds: lp8860: Check return value of devm_mutex_init()
spi: spi-nxp-fspi: Check return value of devm_mutex_init()
local_lock: Move this_cpu_ptr() notation from internal to main header
Merge tag 'perf-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 performance events updates from Ingo Molnar:
"Intel uncore driver enhancements (Kan Liang):
- Support MSR portal for discovery tables
- Support customized MMIO map size
- Add Panther Lake support
- Add IMC freerunning support for Panther Lake"
* tag 'perf-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add iMC freerunning for Panther Lake
perf/x86/intel/uncore: Add Panther Lake support
perf/x86/intel/uncore: Support customized MMIO map size
perf/x86/intel/uncore: Support MSR portal for discovery tables
Merge tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
compiler_types: Provide __no_kstack_erase to disable coverage only on Clang
In order to support Clang's stack depth tracking (for Linux's kstack_erase
feature), the coverage sanitizer needed to be disabled for __init (and
__head) section code. Doing this universally (i.e. for GCC too) created
a number of unexpected problems, ranging from changes to inlining logic
to failures to DCE code on earlier GCC versions.
Since this change is only needed for Clang, specialize it so that GCC
doesn't see the change as it isn't needed there (the GCC implementation
of kstack_erase uses a GCC plugin that removes stack depth tracking
instrumentation from __init sections during a late pass in the IR).
Successfully build and boot tested with GCC 12 and Clang 22.
Fixes: 381a38ea53d2 ("init.h: Disable sanitizer coverage for __init and __head") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507270258.neWuiXLd-lkp@intel.com/ Reported-by: syzbot+5245cb609175fb6e8122@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6888d004.a00a0220.26d0e1.0004.GAE@google.com/ Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20250729234055.it.233-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
fortify: Fix incorrect reporting of read buffer size
When FORTIFY_SOURCE reports about a run-time buffer overread, the wrong
buffer size was being shown in the error message. (The bounds checking
was correct.)
Merge tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Map the SNP calling area pages too so that OVMF EFI fw can issue SVSM
calls properly with the goal of implementing EFI variable store in
the SVSM - a component which is trusted by the guest, vs in the
firmware, which is not
- Allow the kernel to handle #VC exceptions from EFI runtime services
properly when running as a SNP guest
- Rework and cleanup the SNP guest request issue glue code a bit
* tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Let sev_es_efi_map_ghcbs() map the CA pages too
x86/sev/vc: Fix EFI runtime instruction emulation
x86/sev: Drop unnecessary parameter in snp_issue_guest_request()
x86/sev: Document requirement for linear mapping of guest request buffers
x86/sev: Allocate request in TSC_INFO_REQ on stack
virt: sev-guest: Contain snp_guest_request_ioctl in sev-guest
kstack_erase: Fix missed export of renamed KSTACK_ERASE_CFLAGS
Certain targets disable kstack_erase by filtering out KSTACK_ERASE_CFLAGS
rather than adding DISABLE_KSTACK_ERASE. The renaming to kstack_erase
missed the CFLAGS export, which broke those build targets (e.g. x86
vdso32).
Merge tag 'x86_microcode_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader update from Borislav Petkov:
- Switch the microcode loader from using the fake platform device to
the new simple faux bus
* tag 'x86_microcode_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Move away from using a fake platform device
Merge tag 'x86_core_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Add helpers for WB{NO,}INVD with the purpose of using them in KVM and
thus diminish the number of invalidations needed. With preceding
cleanups, as always
* tag 'x86_core_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Add WBINVD and WBNOINVD helpers to target multiple CPUs
x86/lib: Add WBNOINVD helper functions
x86/lib: Drop the unused return value from wbinvd_on_all_cpus()
drm/gpu: Remove dead checks on wbinvd_on_all_cpus()'s return value
Merge tag 'x86_bugs_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU mitigation updates from Borislav Petkov:
- Untangle the Retbleed from the ITS mitigation on Intel. Allow for ITS
to enable stuffing independently from Retbleed, do some cleanups to
simplify and streamline the code
- Simplify SRSO and make mitigation types selection more versatile
depending on the Retbleed mitigation selection. Simplify code some
- Add the second part of the attack vector controls which provide a lot
friendlier user interface to the speculation mitigations than
selecting each one by one as it is now.
Instead, the selection of whole attack vectors which are relevant to
the system in use can be done and protection against only those
vectors is enabled, thus giving back some performance to the users
* tag 'x86_bugs_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Print enabled attack vectors
x86/bugs: Add attack vector controls for TSA
x86/pti: Add attack vector controls for PTI
x86/bugs: Add attack vector controls for ITS
x86/bugs: Add attack vector controls for SRSO
x86/bugs: Add attack vector controls for L1TF
x86/bugs: Add attack vector controls for spectre_v2
x86/bugs: Add attack vector controls for BHI
x86/bugs: Add attack vector controls for spectre_v2_user
x86/bugs: Add attack vector controls for retbleed
x86/bugs: Add attack vector controls for spectre_v1
x86/bugs: Add attack vector controls for GDS
x86/bugs: Add attack vector controls for SRBDS
x86/bugs: Add attack vector controls for RFDS
x86/bugs: Add attack vector controls for MMIO
x86/bugs: Add attack vector controls for TAA
x86/bugs: Add attack vector controls for MDS
x86/bugs: Define attack vectors relevant for each bug
x86/Kconfig: Add arch attack vector support
cpu: Define attack vectors
...
- Fix DIMM module size computation for DIMMs with total capacity which
is a non power-of-two number, in amd64_edac
- Do not be too dramatic when reporting disabled memory controllers in
igen6_edac
- Add support to ie31200_edac for the following SoCs:
- Core i5-14[67]00
- Bartless Lake-S SoCs
- Raptor Lake-HX
* tag 'edac_updates_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{skx_common,i10nm}: Use scnprintf() for safer buffer handling
EDAC/synopsys: Clear the ECC counters on init
EDAC/ie31200: Add Intel Raptor Lake-HX SoCs support
EDAC/igen6: Add Intel Wildcat Lake SoCs support
EDAC/i10nm: Add Intel Granite Rapids-D support
EDAC/mem_repair: Reduce stack usage in edac_mem_repair_get_desc()
EDAC/igen6: Reduce log level to debug for absent memory controllers
EDAC/ie31200: Document which CPUs correspond to each Raptor Lake-S device ID
EDAC/ie31200: Enable support for Core i5-14600 and i7-14700
ie31200/EDAC: Add Intel Bartlett Lake-S SoCs support
Merge tag 'ratelimit.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull ratelimit test updates from Paul McKenney:
"Add functional and stress tests:
- Add trivial kunit test for ratelimit
- Make the ratelimit test more reliable (Petr Mladek)
- Add stress test for ratelimit"
* tag 'ratelimit.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
lib: Add stress test for ratelimit
lib: Make the ratelimit test more reliable
lib: Add trivial kunit test for ratelimit
Merge tag 'lkmm.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull lkmm documentation update from Paul McKenney:
- Add wait_event_cmd() and wait_event_exclusive_cmd() to the list of
wait primitives that provide the needed memory barriers (Håkon
Bugge)
* tag 'lkmm.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
docs/memory-barriers.txt: Add wait_event_cmd() and wait_event_exclusive_cmd()
Merge tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
"Highlights:
- New supported architectures: SuperH, x32, MIPS n32/n64
- Adopt general kernel architectures names
- Integrate the nolibc selftests into the kselftests framework
- Various fixes and new syscall wrappers
Two non-nolibc changes:
- New arm64 selftest which depends on nolibc changes
- General tools/ cross-compilation bugfix for s390 clang"
* tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (30 commits)
selftests/nolibc: add x32 test configuration
tools/nolibc: define time_t in terms of __kernel_old_time_t
selftests/nolibc: show failed run if test process crashes
tools/nolibc: drop s390 clang target override
tools/build: Fix s390(x) cross-compilation with clang
tools/nolibc: avoid false-positive -Wmaybe-uninitialized through waitpid()
selftests/nolibc: correctly report errors from printf() and friends
selftests/nolibc: create /dev/full when running as PID 1
tools/nolibc: add support for clock_nanosleep() and nanosleep()
kselftest/arm64: Add a test for vfork() with GCS
selftests/nolibc: Add coverage of vfork()
tools/nolibc: Provide vfork()
tools/nolibc: Replace ifdef with if defined() in sys.h
tools/nolibc: add support for SuperH
selftests/nolibc: use file driver for QEMU serial
selftests/nolibc: fix EXTRACONFIG variables ordering
tools/nolibc: MIPS: add support for N64 and N32 ABIs
tools/nolibc: MIPS: drop noreorder option
tools/nolibc: MIPS: drop manual stack pointer alignment
tools/nolibc: MIPS: drop $gp setup
...
Merge tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library,
and also provides flexibility for sandboxing scenarios
- Cleanup and extend the user dispatch selftest
* tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Split generic entry into generic exception and syscall entry
selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON
syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
selftests: Fix errno checking in syscall_user_dispatch test
Merge tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs the single instance rcuref
variant
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32
- Cleanups and improvements in selftests and futex bench
* tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Fix spelling mistake "Succeffuly" -> "Successfully"
selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
perf bench futex: Remove support for IMMUTABLE
selftests/futex: Remove support for IMMUTABLE
futex: Remove support for IMMUTABLE
futex: Make futex_private_hash_get() static
futex: Use RCU-based per-CPU reference counting instead of rcuref_t
selftests/futex: Adapt the private hash test to RCU related changes
Merge tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and VDSO updates from Thomas Gleixner:
- Introduce support for auxiliary timekeepers
PTP clocks can be disconnected from the universal CLOCK_TAI reality
for various reasons including regularatory requirements for
functional safety redundancy.
The kernel so far only supports a single notion of time, which means
that all clocks are correlated in frequency and only differ by offset
to each other.
Access to non-correlated PTP clocks has been available so far only
through the file descriptor based "POSIX clock IDs", which are
subject to locking and have to go all the way out to the hardware.
The access is not only horribly slow, as it has to go all the way out
to the NIC/PTP hardware, but that also prevents the kernel to read
the time of such clocks e.g. from the network stack, where it is
required for TSN networking both on the transmit and receive side
unless the hardware provides offloading.
The auxiliary clocks provide a mechanism to support arbitrary clocks
which are not correlated to the system clock. This is not restricted
to the PTP use case on purpose as there is no kernel side association
of these clocks to a particular PTP device because that's a pure user
space configuration decision. Having them independent allows to
utilize them for other purposes and also enables them to be tested
without hardware dependencies.
To avoid pointless overhead these clocks have to be enabled
individualy via a new sysfs interface to reduce the overhead to a
single compare in the hotpath if they are enabled at the Kconfig
level at all.
These clocks utilize the existing timekeeping/NTP infrastructures,
which has been made possible over the recent releases by incrementaly
converting these infrastructures over from a single static instance
to a multi-instance pointer based implementation without any
performance regression reported.
The auxiliary clocks provide the same "emulation" of a "correct"
clock as the existing CLOCK_* variants do with an independent
instance of data and provide the same steering mechanism through the
existing sys_clock_adjtime() interface, which has been confirmed to
work by the chronyd(8) maintainer.
That allows to provide lockless kernel internal and VDSO support so
that applications and kernel internal functionalities can access
these clocks without restrictions and at the same performance as the
existing system clocks.
- Avoid double notifications in the adjtimex() syscall. Not a big
issue, but a trivial to avoid latency source.
* tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
vdso/gettimeofday: Add support for auxiliary clocks
vdso/vsyscall: Update auxiliary clock data in the datapage
vdso: Introduce aux_clock_resolution_ns()
vdso/gettimeofday: Introduce vdso_get_timestamp()
vdso/gettimeofday: Introduce vdso_set_timespec()
vdso/gettimeofday: Introduce vdso_clockid_valid()
vdso/gettimeofday: Return bool from clock_gettime() helpers
vdso/gettimeofday: Return bool from clock_getres() helpers
vdso/helpers: Add helpers for seqlocks of single vdso_clock
vdso/vsyscall: Split up __arch_update_vsyscall() into __arch_update_vdso_clock()
vdso/vsyscall: Introduce a helper to fill clock configurations
timekeeping: Remove the temporary CLOCK_AUX workaround
timekeeping: Provide ktime_get_clock_ts64()
timekeeping: Provide interface to control auxiliary clocks
timekeeping: Provide update for auxiliary timekeepers
timekeeping: Provide adjtimex() for auxiliary clocks
timekeeping: Prepare do_adtimex() for auxiliary clocks
timekeeping: Make do_adjtimex() reusable
timekeeping: Add auxiliary clock support to __timekeeping_inject_offset()
timekeeping: Make timekeeping_inject_offset() reusable
...
Merge tag 'timers-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Simplify the logic in the timer migration code
- Simplify the clocksource code by utilizing the more modern
cpumask+*() interfaces
* tag 'timers-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Use cpumask_next_wrap() in clocksource_watchdog()
clocksource: Use cpumask_any_but() in clocksource_verify_choose_cpus()
timers/migration: Clean up the loop in tmigr_quick_check()
Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
Merge tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so
it supports arbitrary hart indices
- Add a command line parameter and related handling to disable the
generic RISCV IMSIC mechanism on platforms which use a trap-emulated
IMSIC. Unfortunatly this is required because there is no mechanism
available to discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend
variants.
- The usual cleanups and improvements all over the place
* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/riscv-imsic: Add kernel parameter to disable IPIs
irqchip/gic-v3: Fix GICD_CTLR register naming
irqchip/ls-scfg-msi: Fix NULL dereference in error handling
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Convert to __free
irqchip/alpine-msi: Convert to lock guards
irqchip/alpine-msi: Clean up whitespace style
irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
irqdomain: Add device pointer to irq_domain_info and msi_domain_info
irqchip/renesas-rzv2h: Remove unneeded includes
irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/aslint-sswi: Resolve hart index
...
Merge tag 'smp-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp updates from Thomas Gleixner:
"A set of updates for SMP function calls:
- Improve locality of smp_call_function_any() by utilizing
sched_numa_find_nth_cpu() instead of picking a random CPU
- Wait for work completion in smp_call_function_many_cond() only when
there was actually work enqueued
- Simplify functions by unutlizing the appropriate cpumask_*()
interfaces
- Trivial cleanups"
* tag 'smp-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Wait only if work was enqueued
smp: Defer check for local execution in smp_call_function_many_cond()
smp: Use cpumask_any_but() in smp_call_function_many_cond()
smp: Improve locality in smp_call_function_any()
smp: Fix typo in comment for raw_smp_processor_id()
Merge tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
- Prevent a interrupt migration related live lock in handle_edge_irq()
If the interrupt affinity is moved to a new target CPU and the
interrupt is currently handled on the previous target CPU for edge
type interrupts the handler might get stuck on the previous target
for a long time, which causes both involved CPUs to waste cycles and
eventually run into a soft-lockup situation.
Solve this by checking whether the interrupt is redirected to a new
target CPU and if the interrupt is handled on that new target CPU,
busy wait for completion instead of masking it and sending the
pending but which would cause the old CPU to re-run the handler and
in the worst case repeating this excercise for a long time.
This only works on architectures which use single CPU interrupt
targets, but that's so far the only ones where this behaviour has
been observed.
- Add a kunit test for interrupt disable depth counts
The nested interrupt disable depth has been an issue in the past
especially vs. free_irq(), interrupt shutdown and CPU hotplug and
their interactions. The test exercises the combinations of these
scenarios and checks for correctness.
* tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Prevent migration live lock in handle_edge_irq()
genirq: Split up irq_pm_check_wakeup()
genirq: Move irq_wait_for_poll() to call site
genirq: Remove pointless local variable
genirq: Add kunit tests for depth counts
Merge tag 'linux_kselftest-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Fixes:
- false failure of subsystem event test
- glob filter test to use mutex_unlock() instead of mutex_trylock()
- several spelling errors in tests
- test_kexec_jump build errors
- pidfd test duplicate-symbol warnings for SCHED_ CPP symbols
- Add a reliable check for suspend to breakpoints suspend test
- Improvements to ipc test
* tag 'linux_kselftest-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd: Fix duplicate-symbol warnings for SCHED_ CPP symbols
selftests/tracing: Fix false failure of subsystem event test
selftests/kexec: fix test_kexec_jump build
selftests: breakpoints: use suspend_stats to reliably check suspend success
selftests: tracing: Use mutex_unlock for testing glob filter
selftests: print installation complete message
selftests/ptrace: Fix spelling mistake "multible" -> "multiple"
selftests: ipc: Replace fail print statements with ksft_test_result_fail
selftests: Add version file to kselftest installation dir
selftests/cpu-hotplug: fix typo in hotplaggable_offline_cpus function name
Merge tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Correct MODULE_IMPORT_NS() syntax documentation, make kunit_test
timeout configurable via a module parameter and a Kconfig option, fix
longest symbol length test, add a test for static stub, and adjust
kunit_test timeout based on test_{suite,case} speed"
* tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix longest symbol length test
kunit: Make default kunit_test timeout configurable via both a module parameter and a Kconfig option
kunit: Adjust kunit_test timeout based on test_{suite,case} speed
kunit: Add test for static stub
Documentation: kunit: Correct MODULE_IMPORT_NS() syntax
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Colin Ian King [Mon, 14 Jul 2025 16:08:58 +0000 (17:08 +0100)]
ring-buffer: Make the const read-only 'type' static
Don't populate the read-only 'type' on the stack at run time,
instead make it static.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250714160858.1234719-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
MMC host:
- Convert drivers to use devm_mmc_alloc_host()
- Remove redundant pm_runtime_mark_last_busy() calls
- renesas_sdhi:
- Add support for the RZ/T2H and RZ/N2H variants
- Fix incorrect auto retuning for an SDIO card
- rtsx_usb_sdmmc:
- Add 74 clocks in poweron flow
- Re-work the code in sd_set_power_mode()
- loongson2:
- Add driver for the Loongson-2K SD/SDIO controller
- Add support for the Loongson-2K2000 SD/SDIO/eMMC controller
- sdhci:
- Drop sdhci_free_host()/sdhci_pltfm_free() interface
- Remove the sdhci_free_host() and sdhci_pltfm_free() helpers
- sdhci-cadence: Add support for the Mobileye EyeQ controller
- sdhci-esdhc-imx:
- Optimize clock loopback selection
- Don't change pinctrl in suspend if wakeup source
- sdhci-msm:
- Add support for the Milos variant
- Add support for the qcs8300 variant
- Ensure SD card power isn't ON when card gets removed
- sdhci-of-k1: Disable HW busy detection"
* tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits)
mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata
mmc: loongson2: Fix error code in loongson2_mmc_resource_request()
dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller
mmc: loongson2: prevent integer overflow in ret variable
mmc: Remove redundant pm_runtime_mark_last_busy() calls
mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
dt-bindings: mmc: Add sdhci compatible for qcs8300
mmc: sdhci-cadence: use of_property_present
mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver
dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000
mmc: loongson2: Add Loongson-2K SD/SDIO controller driver
dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding
mmc: Convert ternary operator to str_true_false() helper
dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support
mmc: sdhci-cadence: add Mobileye eyeQ support
dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller
mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode()
mmc: cb710-mmc: Convert ternary operator to str_plural() helper
mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow
mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode()
...
Merge tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
Merge tag 'i2c-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C Core:
- prevent double-free of an fwnode if it is a software node
- use recent helpers instead of custom ACPI or outdated OF ones
- add a more elaborate description of a message flag
Cleanups and refactorings:
- lpi2c, riic, st, stm32f7: general improvements
- riic: support more flexible IRQ configurations
- tegra: fix documentation
Improvements:
- lpi2c: improve register polling and add atomic transfer
- imx: use guarded spinlocks
DT binding:
- rk3x: enable power domains
- nxp: support clock property"
* tag 'i2c-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Fix double-free of fwnode in i2c_unregister_device()
i2c: lpi2c: implement xfer_atomic callback
i2c: lpi2c: use readl_poll_timeout() for register polling
dt-bindings: i2c: i2c-rk3x: Allow use of a power-domain
dt-bindings: i2c: exynos5: add samsung,exynos2200-hsi2c compatible
i2c: lpi2c: convert to use secs_to_jiffies()
i2c: st: Use min() to improve code
i2c: imx: use guard to take spinlock
i2c: stm32f7: Use str_on_off() helper
dt-bindings: i2c: nxp,pnx-i2c: allow clocks property
i2c: riic: Add support for RZ/T2H SoC
i2c: riic: Move generic compatible string to end of array
i2c: riic: Pass IRQ desc array as part of OF data
dt-bindings: i2c: renesas,riic: Document RZ/T2H and RZ/N2H support
dt-bindings: i2c: renesas,riic: Move ref for i2c-controller.yaml to the end
i2c: tegra: Add missing kernel-doc for dma_dev member
i2c: Clarify behavior of I2C_M_RD flag
i2c: mux: pca954x: Use dev_fwnode()
i2c: acpi: Replace custom code with device_match_acpi_handle()
Merge tag 'soc-arm-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC code updates from Arnd Bergmann:
"Another small set of code changes for the 32-bit Arm platforms, and a
trivial update to the Kconfig entry for the arm64 TI K3 chip.
Andrew Davis cleans up the system reset handling, which touches a
couple of platforms.
The mediatek platform needs some code changes to support
multiprocessing in the newly added support for the old mt6572 chip"
* tag 'soc-arm-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: sa110/gpio: convert set_multiple() to returning an integer
ARM: rockchip: fix kernel hang during smp initialization
ARM: mediatek: add MT6572 smp bring up code
ARM: mediatek: add board_dt_compat entry for the MT6572 SoC
ARM: tegra: Use I/O memcpy to write to IRAM
arm: orion: use string choices helper
ARM: Switch to new sys-off handler API
arm64: Kconfig.platforms: remove useless select for ARCH_K3
Merge tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
Merge tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
Merge tag 'spdx-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull LICENSES update from Greg KH:
"Here are some small changes to the LICENSES files, removing the
physical address of the FSF as the old one was incorrect and they
finally no longer have that listed in the license files.
These updates come directly from the FSF copies of the files, so they
mirror what they want the files to look like"
* tag 'spdx-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: Replace the obsolete address of the FSF in the GFDL-1.2
LICENSES: Replace the obsolete address of the FSF in the GFDL-1.1
LICENSES: Replace the obsolete address of the FSF in the LGPL-2.1
LICENSES: Replace the obsolete address of the FSF in the LGPL-2.0
LICENSES: Replace the obsolete address of the FSF in the GPL-2.0
LICENSES: Replace the obsolete address of the FSF in the GPL-1.0
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
Merge tag 'staging-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.17-rc1. That's
in quotes as it really isn't all that big of a set of changes this
development cycle at all.
Major things that stand out are:
- gpib cleanups and tweaks with the majority of the big issues now
taken care of. Odds are it will move out of staging/ in the next
merge window if all goes well.
- more constant cleanups and layer removals from the rtl8723bs
driver. It's amazing how many layers deep they really are, all
cleanups here are great to see
- axis-fifo sysfs api removed and debugfs api added. The sysfs api
didn't work at all so obviously no one was using it. Add the same
information into debugfs as that's the proper place for it, and
make it actually work.
- Remaining changes is lots of small checkpatch cleanups, most of
which seem to have come from a Debconf session where people were
encouraged to submit their first kernel patch, a nice thing to see
happen again.
All of these have been in linux-next with no reported issues"
* tag 'staging-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (71 commits)
staging: rtl8723bs: remove redundant semicolon in basic_types.h
staging: gpib: Add init response codes for new ni-usb-hs+
staging: rtl8723bs: DoIQK_8723B is empty
staging: rtl8723bs: dm_CheckStatistics is empty
staging: rtl8723bs: hw_var_port_switch is empty
staging: rtl8723bs: _InitOtherVariable is empty
staging: rtl8723bs: rtw_get_encrypt_decrypt_from_registrypriv is empty
staging: rtl8723bs: rtl8723b_set_FwAoacRsvdPage_cmd is empty
staging: rtl8723bs: CheckFwRsvdPageContent is empty
staging: rtl8723bs: clean up redundant & parentheses
staging: axis-fifo: add debugfs interface for dumping fifo registers
staging: axis-fifo: remove sysfs interface
staging: nvec: Fix incorrect null termination of battery manufacturer
staging: gpib: fix typo
staging: sm750fb: fix CamelCase variable naming
staging: vme_user: fix spelling errors
staging: rtl8723bs: remove unnecessary braces in rtl8723b_cmd
staging: rtl8723bs: remove unnecessary commented code
staging: rtl8723bs: add missing blank line after declaration
staging: rtl8723bs: remove unnecessary comment separator lines
...
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
Steven Rostedt [Fri, 25 Jul 2025 15:21:53 +0000 (11:21 -0400)]
ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits
When testing a series of commits that also includes changes to the Linux
tools directory, it is useless to test the changes in tools as they may
not affect the kernel itself. Doing tests on the kernel for changes that
do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be skipped
while doing the individual commit tests.
For example, the runtime verification may have a series of commits like:
$ git log --abbrev-commit --pretty=oneline fac5493251a6~1..HEAD 3d3800b4f7f4 rv: Remove rv_reactor's reference counter 3d3c376118b5 rv: Merge struct rv_reactor_def into struct rv_reactor 24cbfe18d55a rv: Merge struct rv_monitor_def into struct rv_monitor b0c08dd5348d rv: Remove unused field in struct rv_monitor_def 58d5f0d437a8 (debiantesting-x86-64/trace/rv/core) rv: Return init error when registering monitors 560473f2e2d7 verification/rvgen: Organise Kconfig entries for nested monitors 9efcf590827c tools/dot2c: Fix generated files going over 100 column limit 1160ccaf772f tools/rv: Stop gracefully also on SIGTERM f60227f34489 tools/rv: Do not skip idle in trace f3735df6281e verification/rvgen: Do not generate unused variables 6fb37c2a27eb verification/rvgen: Generate each variable definition only once 8cfcf9b0e92f verification/rvgen: Support the 'next' operator fac5493251a6 rv: Allow to configure the number of per-task monitor
Where the first commit touches the kernel followed by a series of commits
that do not, and ends with commits that do. Instead of having to add
multiple patchcheck tests to handle the gaps, just include the commits
that should not be tested:
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
Since preempt_count_add/del() are tracable functions, it is not allowed
to use preempt_disable/enable() in ftrace handlers. Without this fix,
probing on `preempt_count_add%return` will cause an infinite recursion
of fprobes.
To fix this problem, use preempt_disable/enable_notrace() in
fprobe_return().
Merge tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support ECC in chromeos_pstore
- Allow to control power and data role via sysfs in cros_ec_typec
Improvements:
- Defer probe when the dependencies are not ready in cros_ec_typec
- Retry when a sensor is not ready in cros_ec_sensorhub
Fixes:
- Unregister the blocking notifier as well when unregistering the
struct cros_ec_device.
Cleanups:
- Remove redundant code and leverage more suitable helper macro in
chromeos_laptop
- Fix typo"
* tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Fix typo in CROS_USBPD_NOTIFY help text
platform/chrome: cros_ec_typec: Check ec platform device pointer
platform/chrome: cros_ec: Unregister notifier in cros_ec_unregister()
platform/chrome: cros_ec_typec: Add role swap ops
platform/chrome: chromeos_laptop: Replace open coded variant of DEFINE_RES_IRQ()
platform/chrome: chromeos_laptop: Remove duplicate check
platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
platform/chrome: chromeos_pstore: Add ecc_size module parameter
platform/chrome: cros_ec_typec: Defer probe on missing EC parent
* tag 'platform-drivers-x86-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: oxpec: Add support for OneXPlayer X1 Mini Pro (Strix Point)
platform/x86: oxpec: Fix turbo register for G1 AMD
platform/x86/intel/pmt: support BMG crashlog
platform/x86/intel/pmt: use a version struct
platform/x86/intel/pmt: refactor base parameter
platform/x86/intel/pmt: add register access helpers
platform/x86/intel/pmt: decouple sysfs and namespace
platform/x86/intel/pmt: correct types
platform/x86/intel/pmt: re-order trigger logic
platform/x86/intel/pmt: use guard(mutex)
platform/x86/intel/pmt: mutex clean up
platform/x86/intel/pmt: white space cleanup
drm/xe: Correct BMG VSEC header sizing
drm/xe: Correct the rev value for the DVSEC entries
platform/x86/intel/pmt: fix a crashlog NULL pointer access
platform/x86: samsung-laptop: Expose charge_types
platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
platform/x86: dell-uart-backlight: Use blacklight power constant
platform/x86/intel/pmt: fix build dependency for kunit test
platform/x86: lenovo: gamezone needs "other mode"
...
Merge tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices. This leverages atomic PWM updates
to userspace and at the same time simplifies and accelerates PWM
configuration changes"
* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
hwmon: add support for MC33XS2410 hardware monitoring
pwm: mc33xs2410: add hwmon support
pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
pwm: Expose PWM_WFHWSIZE in public header
dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
docs: pwm: Adapt Locking paragraph to reality
pwm: twl-led: Drop driver local locking
pwm: sun4i: Drop driver local locking
pwm: sti: Drop driver local locking
pwm: microchip-core: Drop driver local locking
pwm: lpc18xx-sct: Drop driver local locking
pwm: fsl-ftm: Drop driver local locking
pwm: clps711x: Drop driver local locking
pwm: atmel: Drop driver local locking
pwm: argon-fan-hat: Add Argon40 Fan HAT support
dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
dt-bindings: vendor-prefixes: Document Argon40
pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
...
Merge tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely driver work, mostly new drivers with
the usual smattering of per driver updates anf fixes, with only
trivial changes in the core. Highlights include:
- Quite a bit of maintainence work on the STM32 and Qualcomm drivers
- Usage of the newly added devm_dma_request_chan() in the ateml
driver, pulling in the relevant dmaengine change
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Support for ADI sigma-delta triggers, Amlogic SPISG, Mediatek
MT6991 and MT8196, Renesas RZ/V2H(P) and SOPHGO SG2042"
* tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (62 commits)
spi: SPISG: Fix less than zero comparison on a u32 variable
spi: intel: Allow writeable MTD partition with module param
spi: Add driver for the RZ/V2H(P) RSPI IP
spi: dt-bindings: Document the RZ/V2H(P) RSPI
MAINTAINERS: Add an entry for Amlogic spi driver
spi: Add Amlogic SPISG driver
spi: dt-bindings: Add binding document of Amlogic SPISG controller
spi: spi-sg2044-nor: Add SPI-NOR controller for SG2042
spi: spi-sg2044-nor: Add configurable chip_info
spi: dt-bindings: spi-sg2044-nor: Change SOPHGO SG2042
spi: spi-qpic-snand: simplify bad block marker duplication
spi: spidev: Add an entry for the ABB spi sensors
dt-bindings: trivial-devices: Document ABB sensors
spi: stm32-ospi: Fix NULL vs IS_ERR() bug in stm32_ospi_get_resources()
spi: gpio: Use explicit 'unsigned int' for parameter types
spi: dt-bindings: spi-mux: Drop "spi-max-frequency" as required
spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
spi: rspi: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: sh-msiof: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: xilinx: Fix block comment style and minor cleanups
...
Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
Merge tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A very quiet release for regmap this time, just two cleanup patches
and one almost cleanup patch which saves individual MMIO regmaps
flagging themselves as having fast I/O"
* tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Annotate that MMIO implies fast IO
regmap: get rid of redundant debugfs_file_{get,put}()
regmap: kunit: Constify regmap_range_cfg array
Merge tag 'pwrseq-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and a small set of improvements as well as a fix to
power sequence unit naming.
New driver:
- add a power sequencing driver for the T-HEAD TH1520 GPU
Power sequencing core improvements:
- allow to compile the pwrseq drivers with COMPILE_TEST=y in order to
improve the build-test coverage
- add named defines for the possible return values of the .match()
callback and use it in the existing drivers instead of magic values
Fix:
- Fix the name of the bluetooth-enable unit for WCN6855"
* tag 'pwrseq-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix bluetooth-wifi copypasta for WCN6855
power: sequencing: thead-gpu: use new defines for match() return values
power: sequencing: qcom-wcn: use new defines for match() return values
power: sequencing: add defines for return values of the match() callback
power: sequencing: extend build coverage with COMPILE_TEST=y
power: sequencing: thead-gpu: add missing header
power: sequencing: Add T-HEAD TH1520 GPU power sequencer driver
Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
Merge tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
Merge tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These update the thermal control sysfs interface and multiple thermal
control drivers:
- Convert EAGAIN into ENODATA in temp_show() to prevent user space
from polling the sysfs file in vain after a failing O_NONBLOCK read
under the assumption that the read would have blocked (Hsin-Te
Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal
driver (Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the
firmware in the Intel platform temperature control (PTC) interface
and add a new sysfs control attribute called thermal_tolerance to
it (Srinivas Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with a new
initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT
bindings (Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver
(Aaron Kling)"
* tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
dt-bindings: thermal: tegra: Document Tegra210B01
dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516
dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor
thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands
thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data
thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const
thermal/drivers/rockchip: Support reading trim values from OTP
dt-bindings: thermal: rockchip: document otp thermal trim
thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver
dt-bindings: rockchip-thermal: Add RK3576 compatible
thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode
thermal: Use dev_fwnode()
thermal: Constify struct thermal_zone_device_ops
thermal/drivers/loongson2: Constify struct thermal_zone_device_ops
thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
thermal: sysfs: Return ENODATA instead of EAGAIN for reads
...
Merge tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update APEI (new EINJv2 error injection, assorted fixes), fix
the ACPI processor driver, update the legacy ACPI /proc interface
(multiple assorted fixes of minor issues) and several assorted ACPI
drivers (minor fixes and cleanups):
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface
(Andy Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver
to avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver
(Dan Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to
the ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)"
* tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: Fix typos
ACPI/PCI: Remove space before newline
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI/PNP: Use my kernel.org address in MAINTAINERS and ABI docs
ACPI: TAD: Replace sprintf() with sysfs_emit()
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
Documentation: ACPI: Fix parent device references
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: APEI: EINJ: Fix trigger actions
ACPI: processor: fix acpi_object initialization
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: LPSS: Remove AudioDSP related ID
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
ACPI: PM: Set .detach in acpi_general_pm_domain definition
...
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
====================
bpf: Show precise rejected function when attaching to __noreturn and deny list functions
Show precise rejected function when attaching fexit/fmod_ret to __noreturn
functions.
Add log for attaching tracing programs to functions in deny list.
Add selftest for attaching tracing programs to functions in deny list.
Migrate fexit_noreturns case into tracing_failure test suite.
changes:
v4:
- change tracing_deny case attaching function (Yonghong Song)
- add Acked-by: Yafang Shao and Yonghong Song
v3:
- add tracing_deny case into existing files (Alexei)
- migrate fexit_noreturns into tracing_failure
- change SOB
https://lore.kernel.org/bpf/20250722153434.20571-1-kafai.wan@linux.dev/
Merge tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock update from Mickaël Salaün:
"Fix test issues, improve build compatibility, and add new tests"
* tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix cosmetic change
samples/landlock: Fix building on musl libc
landlock: Fix warning from KUnit tests
selftests/landlock: Add test to check rule tied to covered mount point
selftests/landlock: Fix build of audit_test
selftests/landlock: Fix readlink check
Merge tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Introduce the concept of a SELinux "neveraudit" type which prevents
all auditing of the given type/domain.
Taken by itself, the benefit of marking a SELinux domain with the
"neveraudit" tag is likely not very interesting, especially given the
significant overlap with the "dontaudit" tag.
However, given that the "neveraudit" tag applies to *all* auditing of
the tagged domain, we can do some fairly interesting optimizations
when a SELinux domain is marked as both "permissive" and "dontaudit"
(think of the unconfined_t domain).
While this pull request includes optimized inode permission and
getattr hooks, these optimizations require SELinux policy changes,
therefore the improvements may not be visible on standard downstream
Linux distos for a period of time.
- Continue the deprecation process of /sys/fs/selinux/user.
After removing the associated userspace code in 2020, we marked the
/sys/fs/selinux/user interface as deprecated in Linux v6.13 with
pr_warn() and the usual documention update.
This adds a five second sleep after the pr_warn(), following a
previous deprecation process pattern that has worked well for us in
the past in helping identify any existing users that we haven't yet
reached.
- Add a __GFP_NOWARN flag to our initial hash table allocation.
Fuzzers such a syzbot often attempt abnormally large SELinux policy
loads, which the SELinux code gracefully handles by checking for
allocation failures, but not before the allocator emits a warning
which causes the automated fuzzing to flag this as an error and
report it to the list. While we want to continue to support the work
done by the fuzzing teams, we want to focus on proper issues and not
an error case that is already handled safely. Add a NOWARN flag to
quiet the allocator and prevent syzbot from tripping on this again.
- Remove some unnecessary selinuxfs cleanup code, courtesy of Al.
- Update the SELinux in-kernel documentation with pointers to
additional information.
* tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: don't bother with selinuxfs_info_free() on failures
selinux: add __GFP_NOWARN to hashtab_init() allocations
selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive
selinux: introduce neveraudit types
documentation: add links to SELinux resources
selinux: add a 5 second sleep to /sys/fs/selinux/user
Merge tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Add Nicolas Bouchinet and Xiu Jianfeng as Lockdown maintainers
The Lockdown LSM has been without a dedicated mantainer since its
original acceptance upstream, and it has suffered as a result.
Thankfully we have two new volunteers who together I believe have the
background and desire to help ensure Lockdown is properly supported.
- Remove the unused cap_mmap_file() declaration
* tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: Add Xiu and myself as Lockdown maintainers
security: Remove unused declaration cap_mmap_file()
lsm: trivial comment fix
Merge tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"Simplify how fscrypt uses the crypto API, resulting in some
significant performance improvements:
- Drop the incomplete and problematic support for asynchronous
algorithms. These drivers are bug-prone, and it turns out they are
actually much slower than the CPU-based code as well.
- Allocate crypto requests on the stack instead of the heap. This
improves encryption and decryption performance, especially for
filenames. This also eliminates a point of failure during I/O"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
ceph: Remove gfp_t argument from ceph_fscrypt_encrypt_*()
fscrypt: Remove gfp_t argument from fscrypt_encrypt_block_inplace()
fscrypt: Remove gfp_t argument from fscrypt_crypt_data_unit()
fscrypt: Switch to sync_skcipher and on-stack requests
fscrypt: Drop FORBID_WEAK_KEYS flag for AES-ECB
fscrypt: Don't use asynchronous CryptoAPI algorithms
fscrypt: Don't use problematic non-inline crypto engines
fscrypt: Drop obsolete recommendation to enable optimized SHA-512
fscrypt: Explicitly include <linux/export.h>
Merge tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library conversions from Eric Biggers:
"Convert fsverity and apparmor to use the SHA-2 library functions
instead of crypto_shash. This is simpler and also slightly faster"
* tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
fsverity: Switch from crypto_shash to SHA-2 library
fsverity: Explicitly include <linux/export.h>
apparmor: use SHA-256 library API instead of crypto_shash API
Merge tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library test updates from Eric Biggers:
"Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256,
SHA-384, and SHA-512 library functions.
These are the first KUnit tests for lib/crypto/. So in addition to
being useful tests for these specific algorithms, they also establish
some conventions for lib/crypto/ testing going forwards.
The new tests are fairly comprehensive: more comprehensive than the
generic crypto infrastructure's tests. They use a variety of
techniques to check for the types of implementation bugs that tend to
occur in the real world, rather than just naively checking some test
vectors. (Interestingly, poly1305_kunit found a bug in QEMU)
The core test logic is shared by all six algorithms, rather than being
duplicated for each algorithm.
Each algorithm's test suite also optionally includes a benchmark"
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Annotate worker to be on stack
lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1
lib/crypto: tests: Add KUnit tests for Poly1305
lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512
lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256
lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
dt-bindings: Correct indentation and style in DTS example
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack.
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
projects / thirdparty / kernel / linux.git / log
