tests: Fix ap_wpa2_eap_too_many_roundtrips with OpenSSL 1.1.0
Use a smaller fragment_size to force the roundtrip limit to be reached
with OpenSSL 1.1.0 which seemed to result in a bit shorter TLS messages
being used and being able to complete the authentication successfully
with the previously used fragment_size value.
Commit 49fe2ada20d5fd53c0388442d23e7f03086f4d57 ('OpenSSL: Support
OpenSSL 1.1.0 DH opacity') started using the new accessor functions, but
used incorrect success check for the DH_set0_key() call. This resulted
in dh5_init_fixed() failures and double-free on error path if the build
was linked against OpenSSL 1.1.0. Fix this by checking DH_set0_key()
return value to be 1 for the success case.
If base64_encode() fails (e.g., due to memory allocation failure), the
return value needs to be checked against NULL before using the (not
really) returned length value. The error path here ended up reading
uninitialized variable.
tests: Fix interworking_select() bssid argument in some test cases
The bssid argument was missing from couple of test cases. While this is
clearly incorrect, it looks like the error did not really cause any
significant issues to the test case. Anyway, better provide the correct
set of arguments to the call.
Roshan Pius [Thu, 30 Jun 2016 22:26:07 +0000 (15:26 -0700)]
Do not exceed scan ssid max size advertised by driver
Previously, wpa_set_scan_ssids() fully exhausted
wpa_driver_scan_params.ssid list when hidden network IDs are provided
via the control interface. This results in us exceeding the max size for
the list advertised by the driver when we add the "wildcard" scan SSID
entry. So, ensure that we leave space for one more scan SSID entry in
the list when we exit out of wpa_set_scan_ssids().
Jouni Malinen [Thu, 30 Jun 2016 18:59:09 +0000 (21:59 +0300)]
MBO: Improve supported operating class generation
Previously, 2.4 GHz operating class 81 was not added for US due to not
all of the channels (1-13 in this operating class) being supported.
Still, this operating class is the main operating class in the global
table for 2.4 GHz and it is the only option for indicating support for
the 2.4 GHz band channels in US.
Change the supported operating class building rules to include all
operating classes for which at least one channel is enabled. In
addition, fix the 80, 80+80, and 160 MHz channel checks (checking the
center frequency channel was failing since it is not a valid 20 MHz
channel).
Jouni Malinen [Tue, 28 Jun 2016 20:20:39 +0000 (23:20 +0300)]
mesh: Update MPM FSM events to match the standard
{OPN,CNF,CLS}_IGNR events were removed during P802.11s draft development
process. Replace these with not generating a MPM FSM event. In addition,
add the standard REQ_RJCT event and option to pass in a specific reason
code to mesh_mpm_fsm().
Jouni Malinen [Tue, 28 Jun 2016 19:53:05 +0000 (22:53 +0300)]
mesh: Rename MPM FSM states to match the standard
During the P802.11s draft development, there were separate LISTEN and
IDLE states. However, the current IEEE 802.11 standards uses only the
IDLE state while the implementation called this LISTEN. Rename the state
in the implementation to match the one used in the standard to avoid
confusion. In addition, rename OPEN_{SENT,RCVD} to OPN_{SNT,RCVD} to
match the exact spelling of these states in the standard.
Jouni Malinen [Tue, 28 Jun 2016 19:45:41 +0000 (22:45 +0300)]
mesh: Indicate OPN_RJCT event if AES-SIV decrypt fails
REVmc/D6.0 14.5.5.2.2 (Processing Mesh Peering Open frames for AMPE)
mandates the OPN_RJCT event to be invoked if AES-SIV decryption for
received Mesh Peering Open frame fails. This allows a Mesh Peering Close
frame to be sent in such a case.
Jouni Malinen [Tue, 28 Jun 2016 19:23:42 +0000 (22:23 +0300)]
mesh: Remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
These optional fields are supposed to be included in the Authenticated
Mesh Peering Exchange element only in Mesh Peering Open frames.
Previously, these were incorrectly included in Mesh Peering
Confirm/Close frames and also required to be present in all these
frames.
While this commit changes the receive processing to ignore the
unexpected extra fields, it should be noted that the previous
implementation required the fields to be present and as such, the fixed
implementation is not compatible with it for secure mesh.
Jonathan Afek [Thu, 23 Jun 2016 17:16:35 +0000 (20:16 +0300)]
tests: Add general filter for remote tests execution
Add a new function decorator for the test functions so that they can be
marked as remote compatible tests. Add a general filter to the remote
tests execution script to only execute tests that are remote compatible.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use general cmd_execute() for bridge setup commands
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing shell commands to setup bridge so that this would also work on
remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for iw connect command
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "iw connect ..." commands so that this would also work on
remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for ip link set up/down commands
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "ip link set up/down" commands so that this would also work on
remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for iw station get command
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "iw ... station get" commands so that this would also work on
remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() in find_wpas_process()
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "ps ax" so that this would also work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for ip addr add/del
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "ip addr add/del .." so that this would also work on remote
setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for iw scan
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "iw scan .." so that this would also work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:29 +0000 (20:16 +0300)]
tests: Use cmd_execute() for iw reg set 00
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "iw reg set 00" so that this would also work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:34 +0000 (20:16 +0300)]
tests: Add the forgotten wlantest_setup() call to a TDLS test
One TDLS test case was using wlantest without doing the setup first.
This makes the test not work on real hardware. Fix the issue by adding
the wlantest setup to the test.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Thu, 23 Jun 2016 17:16:30 +0000 (20:16 +0300)]
tests: Use cmd_execute() in set_powersave()
hwsim_utils.set_powersace() used to do file operations locally in
python. Start using the cmd_execute() general function for file
operations so that this would also work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jouni Malinen [Mon, 27 Jun 2016 17:24:52 +0000 (20:24 +0300)]
tests: Wait for CTRL-EVENT-CHANNEL-SWITCH event in ap_csa tests
This verifies that the channel switch is reported by the station and
replaces the fixed sleep before a traffic test by wait for the actual
switch operation to complete.
Jouni Malinen [Mon, 27 Jun 2016 17:10:23 +0000 (20:10 +0300)]
tests: Use shell in local cmd_execute() only if needed
The generic cmd_execute() function was introduced in a manner that
converted the argument array to a string and used shell to run the
command unconditionally. This is not really desirable, so move back to
using the command array by default and use the single command string
with a shell only when really needed.
Jonathan Afek [Tue, 7 Jun 2016 13:42:41 +0000 (16:42 +0300)]
tests: Use cmd_execute() in ap_ht clear_scan_cache()
The ap_ht tests used to execute shell commands in the tests using the
subprocess python module. Complete the move to using the cmd_execute()
general function for executing shell commands so that this would also
work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Tue, 7 Jun 2016 13:42:41 +0000 (16:42 +0300)]
tests: Use cmd_execute() function in ap_ht40_scan_not_affected
The ap_ht tests used to execute shell commands in the tests using the
subprocess python module. Start using the cmd_execute() general function
for executing shell commands so that this would also work on remote
setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Tue, 7 Jun 2016 13:42:41 +0000 (16:42 +0300)]
tests: Use the cmd_execute() function in ap_ht for iw reg set
The ap_ht tests used to execute iw reg set command using the subprocess
python module. Start using the cmd_execute() general function for
executing shell commands so that this would also work on remote setups.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
Jonathan Afek [Tue, 7 Jun 2016 13:42:41 +0000 (16:42 +0300)]
tests: Use apdev[0] more consistently in ap_ht
The test cases ap_ht40_5ghz_invalid_pair and ap_ht40_5ghz_disabled_sec
mixed use of apdev[0] and apdev[1] while only needing a single AP. This
works when both the devices are on the same host (e.g., with
mac80211_hwsim), but not when using separate remote hosts. Fix this by
using apdev[0] more consistently in these test cases.
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
projects / thirdparty / hostap.git / log
