Arnd Bergmann [Tue, 20 Jun 2023 20:34:46 +0000 (22:34 +0200)]
Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.5-rc1
This introduces support for the IGX Orin and Jetson Orin Nano devices
and enables various additional features on the Jetson AGX Orin and
Jetson Orin NX. This also enables some basic thermal support to prevent
the devices from overheating.
Support for the GPU on the Google Pixel C is enabled and various minor
issues are fixed and cleaned up.
* tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable thermal support on Jetson Orin Nano
arm64: tegra: Enable thermal support on Jetson Orin NX
arm64: tegra: Enable thermal support on Jetson AGX Orin
arm64: tegra: Add Tegra234 thermal support
arm64: tegra: Add a few blank lines for better readability
arm64: tegra: Sort properties more logically
arm64: tegra: Enable GPU on Smaug
arm64: tegra: Add GPU power rail regulator on Smaug
arm64: tegra: Update USB phy-name for Jetson Orin NX
arm64: tegra: Enable USB device for Jetson AGX Orin
arm64: tegra: Add Tegra234 pin controllers
arm64: tegra: Support Jetson Orin Nano Developer Kit
arm64: tegra: Add missing cache properties on Tegra210
arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
arm64: tegra: Add CPU OPP tables and interconnects property
arm64: tegra: Add support for IGX Orin
Arnd Bergmann [Tue, 20 Jun 2023 20:33:45 +0000 (22:33 +0200)]
Merge tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.5-rc1
Several new modules and devices are documented and fixes incorporated
for the Tegra234 GPIO controller pin mappings as well as the possible
Tegra XUDC PHY connections.
* tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: Document Jetson Orin Nano Developer Kit
dt-bindings: tegra: Document Jetson Orin Nano
dt-bindings: gpio: Remove FSI domain ports on Tegra234
dt-bindings: usb: tegra-xudc: Remove extraneous PHYs
dt-bindings: tegra: Add ICC IDs for dummy memory clients
dt-bindings: tegra: Document compatible for IGX
- MPU:
- STMP32MP15:
- Add OTP part number and Vrefint calibration in bsec.
- M4 hold management updated. As SMC call is deprecated,
the service is moved on a SCMI service.
- Add ADC internal channels (VREFINT/VDDCORE).
- ST:
- Enable ADC1&2 on STM32MP15 DKx boards.
- Adopt generic IIO bindings on STM32MP157C ED1
- Add supplies for OV5640 in STM32MP157C EV1
to fix yaml validation.
- Fix i2s bindings to match with the YAML validation (DKx boards).
-PHYTEC:
- Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.
* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
ARM: dts: stm32: add vrefint calibration on stm32mp15
ARM: dts: stm32: add adc internal channels to stm32mp15
ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
ARM: dts: stm32: fix warnings on stm32f469-disco board
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
ARM: dts: stm32: add STM32MP1-based Phytec board
...
Thierry Reding [Fri, 9 Jun 2023 11:45:53 +0000 (13:45 +0200)]
arm64: tegra: Enable thermal support on Jetson Orin NX
Enable the TJ thermal zone and hook up cooling maps for the PWM-
controlled fan and two trip points.
This also removes a duplicate definition of the PWM fan and changes its
cooling levels. This should have no effect, though, because the fan
wasn't previously connected to anything and by default would be turned
off at probe time.
Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 26 Jan 2023 13:34:02 +0000 (14:34 +0100)]
arm64: tegra: Enable thermal support on Jetson AGX Orin
Add thermal zone details and enable the PWM fan as cooling device.
Note that this also changes the cooling levels for the PWM fan, which
should have no effect, though, because the fan wasn't previously
connected to anything and by default would be turned off at probe time.
Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 9 Jun 2023 10:55:42 +0000 (12:55 +0200)]
arm64: tegra: Sort properties more logically
We typically sort the "compatible" property first because it defines
what the remainder of the properties can be. For the sound node on the
Jetson AGX Orin this wasn't done, so fix that up.
Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Fri, 9 Jun 2023 13:00:24 +0000 (15:00 +0200)]
Merge tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.5 (take two)
- Add IOMMU support for PCIe devices on R-Car Gen3 and RZ/G2 SoCs,
- Add HSCIF1 serial port support on Renesas ULCB boards equipped with
the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb-kf: Add HSCIF1 node
arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1
ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier
arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes
Arnd Bergmann [Fri, 9 Jun 2023 12:54:32 +0000 (14:54 +0200)]
Merge tag 'omap-for-v6.5/dt-pin-nodes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Clean-up for pinctrl-single node names for omaps for v6.5
To avoid producing lots of make dtbs checks warnings when the yaml binding
for pinctrl-single gets merged, let's fix up the pin group node names. We
want to do this rather than add non-standard node name workarounds to the
yaml binding.
Also included is a non-urgent fix to move gta04 model name out of the pinmux
node that can wait for the merge window.
* tag 'omap-for-v6.5/dt-pin-nodes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Unify pinctrl-single pin group nodes for dra7
ARM: dts: Unify pinctrl-single pin group nodes for am4
ARM: dts: Unify pinctrl-single pin group nodes for am33xx
ARM: dts: Unify pinctrl-single pin group nodes for ti81xx
ARM: dts: Unify pinctrl-single pin group nodes for omap5
ARM: dts: Unify pinctrl-single pin group nodes for omap4
ARM: dts: Unify pinctrl-single pin group nodes for omap2
ARM: dts: Unify pinctrl-single pin group nodes for omap3
ARM: dts: gta04: Move model property out of pinctrl node
Xianwei Zhao [Mon, 15 May 2023 09:32:37 +0000 (17:32 +0800)]
arm64: dts: add support for C3 based Amlogic AW409
Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.
Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.
Marek Vasut [Tue, 6 Jun 2023 18:01:12 +0000 (20:01 +0200)]
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
The audio routing flow is not correct, the flow should be from source
(second element in the pair) to sink (first element in the pair). The
flow now is from "HP_OUT" to "Playback", where "Playback" is source
and "HP_OUT" is sink, i.e. the direction is swapped and there is no
direct link between the two either.
Fill in the correct routing, where "HP_OUT" supplies the "Headphone Jack",
"Line In Jack" supplies "LINE_IN" input, "Microphone Jack" supplies "MIC_IN"
input and "Mic Bias" supplies "Microphone Jack".
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Tony Lindgren [Tue, 23 May 2023 06:55:18 +0000 (09:55 +0300)]
arm64: dts: hisilicon: Unify pinctrl-single pin group nodes
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Let's also correct the pinctrl controller #size-cells to 0 while at it.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Tony Lindgren [Tue, 23 May 2023 07:50:34 +0000 (10:50 +0300)]
ARM: dts: hisilicon: Unify pinctrl-single pin group nodes
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Let's also correct the pinctrl controller #size-cells to 0 while at it
and drop unnecessary ranges property.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Arnd Bergmann [Tue, 6 Jun 2023 15:33:48 +0000 (17:33 +0200)]
Merge tag 'samsung-dt-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.5
1. Final cleanups and improvements as a result of dtbs_checks which rely
on previously merged driver changes thus affecting older or
out-of-tree kernels. The changes are necessary to achieve full
dtbs_check compliance, which justifies affecting out-of-tree users.
Changes affecting them are:
- Drop simple-bus compatible from FIMC: Exynos4 and S5PV210,
- Remove empty camera pinctrl configuration: Exynos4 and S5PV210,
- Re-order MFC clock names to match Exynos and bindings: S5PV210.
2. Except above few more non-intrusive cleanups for dtbs_check for
S5PV210. Fix also some typos.
3. Re-introduce Exynos4212 which was removed because of lack of upstream
users. Artur Weber adds now Samsung Galaxy Tab3 with Exynos4212.
* tag 'samsung-dt-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: Fix typo in comments, fix pinctrl header
ARM: dts: s3c64xx: Fix some typos in comments
ARM: dts: exynos: Fix some typos in comments
dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
ARM: dts: exynos: Re-introduce Exynos4212 DTSI
ARM: dts: exynos: Move common Exynos4x12 definitions to exynos4x12.dtsi
ARM: dts: s5pv210: remove empty camera pinctrl configuration
ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210
ARM: dts: s5pv210: re-order MFC clock names to match Exynos and bindings
ARM: dts: s5pv210: align USB node name with bindings
ARM: dts: s5pv210: align pin configuration nodes with bindings
ARM: dts: exynos: Remove empty camera pinctrl configuration in Odroid X/U3
ARM: dts: exynos: Remove empty camera pinctrl configuration in Universal C210
ARM: dts: exynos: Remove empty camera pinctrl configuration in Trats
ARM: dts: s5pv210: drop simple-bus from FIMC
ARM: dts: exynos: drop simple-bus from FIMC in Exynos4
Arnd Bergmann [Tue, 6 Jun 2023 15:32:01 +0000 (17:32 +0200)]
Merge tag 'at91-dt-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
AT91 DT for 6.5
It contains:
- gpio-line-names addition for at91-tse850-3 board
- support for SMA connectors on lan966x-pcb8309 board
- use drive-open-drain as boolean property as this is how code handles
it
- generic names for clock controller devices
- use of the new clock controller bindings for at91sam9n12 slow clock
controller
- one blank line removal on sama5d2.dtsi
* tag 'at91-dt-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: remove extra line
ARM: dts: at91: Return to boolean properties
ARM: dts: lan966x: Add support for SMA connectors
ARM: dts: at91: use clock-controller name for sckc nodes
ARM: dts: at91: at91sam9n12: witch sckc to new clock bindings
ARM: dts: at91: use clock-controller name for PMC nodes
ARM: dts: at91: tse850: add properties for gpio-line-names
Arnd Bergmann [Tue, 6 Jun 2023 15:16:30 +0000 (17:16 +0200)]
Merge tag 'ux500-dts-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
These are some Ux500 DTS updates for the v6.5 kernel cycle:
- Define the SRAM nodes that will be the preferred way to
specify SRAM segments to drivers going forward.
- Fix up the naming of the STMPE nodes as we are merging
proper YAML bindings which puts restrictions on those.
- Disable charging on the Ux500 HREF boards because these
do not have any real batteries connected.
* tag 'ux500-dts-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Add eSRAM nodes
ARM: dts: ux500: Fix STMPE device nodes
ARM: dts: ux500: Disable charging on HREF boards
Prathamesh Shete [Tue, 30 May 2023 10:51:08 +0000 (12:51 +0200)]
dt-bindings: gpio: Remove FSI domain ports on Tegra234
Ports S, T, U and V are in a separate controller that is part of the FSI
domain. Remove their definitions from the MAIN controller definitions to
get rid of the confusion.
This technically breaks ABI compatibility with old device trees. However
it doesn't cause issues in practice. The GPIO pins impacted by this are
used for non-critical functionality.
Alain Volmat [Thu, 1 Jun 2023 06:52:21 +0000 (08:52 +0200)]
ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
Correct the following warnings by adding the required supplies (AVDD, DVDD)
for the ov5640 node.
arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'AVDD-supply' is a required property
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'DVDD-supply' is a required property
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
Marek Vasut [Tue, 30 May 2023 12:45:37 +0000 (14:45 +0200)]
ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
The generic ADC channel binding is recommended over legacy one, update the
DT to the modern binding. No functional change. For further details, see
commit which adds the generic binding to STM32 ADC binding document:
'664b9879f56e ("dt-bindings: iio: stm32-adc: add generic channel binding")'
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Olivier Moysan [Tue, 30 May 2023 12:45:36 +0000 (14:45 +0200)]
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
Use STM32 ADC generic bindings instead of legacy bindings on
DHCOR Testbench board.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Olivier Moysan [Tue, 30 May 2023 12:45:35 +0000 (14:45 +0200)]
ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
Use STM32 ADC generic bindings instead of legacy bindings on
DHCOR DRC Compact board.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Olivier Moysan [Tue, 30 May 2023 12:45:34 +0000 (14:45 +0200)]
ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
Use STM32 ADC generic bindings instead of legacy bindings on
emtrion GmbH Argon boards.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Olivier Moysan [Tue, 30 May 2023 12:45:33 +0000 (14:45 +0200)]
ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
Use STM32 ADC generic bindings instead of legacy bindings on
STM32MP157c-ed1 board.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Olivier Moysan [Tue, 30 May 2023 12:45:32 +0000 (14:45 +0200)]
ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
U-Boot enables ADC1&2 to support USB power measurement and ADC
calibration on STM32MP15x Disco boards.
When leaving U-boot the ADCs do not return to power down state
to keep ADC linear calibration available for kernel.
Enable ADC1&2 by default on STM32MP15xx-DKx boards to align kernel
DT with Uboot. This avoids to shutdown the ADCs VDDA, while the
ADCs are not in power down.
Use STM32 ADC generic bindings instead of legacy bindings on
STM32MP15xx-DKx boards.
The ADC pins on Arduino connector are not set by default.
These pins are added in A7 Disco example DTs only.
Olivier Moysan [Tue, 30 May 2023 12:45:31 +0000 (14:45 +0200)]
ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
Set STM32 ADC2 as a consumer of BSEC on STM32MP15, to retrieve
vrefint calibration data saved in OTP.
During the calibration process vrefp is set to 3.3V and the data
acquired is saved to the OTP. This data is used by the ADC driver
to calculated the actual value of vrefp according to the formula:
vrefp = 3.3 x vrefint_cal / vrefint_data
The vrefint channel provides the actual value of vrefp,
which can be used to correct ADC acquisition data.
Olivier Moysan [Tue, 30 May 2023 12:45:29 +0000 (14:45 +0200)]
ARM: dts: stm32: add adc internal channels to stm32mp15
Add STM32 ADC2 internal channels VREFINT and VDDCORE to STM32MP15x SoCs.
VBAT internal channel is not defined by default in SoC DT, and
has be defined in board DT when needed, instead. This avoids unwanted
current consumption on battery, when ADC conversions are performed
on any other channels.
The internal channels are defined in STM32MP15 SoC DT according to the
generic IIO channel bindings. The STM32 driver does not support a mixed
use of legacy and generic channels. When generic channels are defined,
legacy channels are ignored. This involves that the board device trees
using legacy bindings for ADC2, have to be reworked.
arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
PWM specifiers referring to R-Car PWM Timer Controllers should contain
only two cells.
arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes
Add iommu-map and iommu-map-mask properties to the PCIe host nodes.
Note that iommu-map-mask should be zero because the IPMMU assigns
one micro TLB ID only, to the PCIe host.
Also change the dma-ranges arguments for IOMMU. Note that dma-ranges
can be used if the IOMMU is disabled.
ARM: dts: axp209: Add iio-hwmon node for internal temperature
This adds a DT node to hook up the internal temperature ADC to the
iio-hwmon driver. The various voltage + current ADCs are consumed and
exposed by their respective drivers, but this is not and is always
available. Naming chosen to match the axp20x_ prefix the power sensors
use.
ARM: dts: sun5i: Add port E pinmux settings for mmc2
These alternate pins for mmc2 are brought out to the 40 pin U14 header
on the C.H.I.P and can be used to add an external MMC device with a 4
bit interface. See
The C.H.I.P has an rtl8723bs device with the bluetooth interface hooked
up on UART3. Support for this didn't exist in mainline when the DTS was
initially added, but it does now, so enable it.
ARM: dts: meson8: correct uart_B and uart_C clock references
On Meson8 uart_B and uart_C do not work, because they are relying on
incorrect clocks. Change the references of pclk to the correct CLKID
(UART1 for uart_B and UART2 for uart_C), to allow use of the two uarts.
This was originally reported by Hans-Frieder Vogt for Meson8b [0], but
the same bug is also present in meson8.dtsi
Andreas Kemnade [Mon, 13 Mar 2023 11:04:09 +0000 (12:04 +0100)]
ARM: dts: omap4: add initial support for Epson Moverio BT-200
Add the devices working with current drivers for the
Epson Moverio BT-200 AR glasses consisting of a control unit
and the glasses itself.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230313110409.2294154-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
The NAND wait pin is connected to the GPMC, but this is not mentioned
in the DT bindings. Let's fix this.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Message-Id: <20230524091157.775960-1-eagle.alexander923@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Artur Weber [Fri, 19 May 2023 19:06:25 +0000 (21:06 +0200)]
ARM: dts: s5pv210: Fix typo in comments, fix pinctrl header
Change 'specfic' to 'specific' and make the pinctrl DTSI header
more like the s3c64xx pinctrl DTSI (previously it was copied from
the main s5pv210 DTSI, and not changed to match the new contents).
"#address-cells" and "#size-cells" are two properties that are not
mandatory. For instance, the DSI could refer to a bridge outside the scope
of the node rather than include a 'panel@0' subnode. By doing so, address
and size fields become then unnecessary, creating a warning at build time.
ARM: dts: stm32: fix warnings on stm32f469-disco board
Several warnings appear when building and checking stm32f429 device-tree:
arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property
.../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@40016c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)
From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
Marek Vasut [Thu, 18 May 2023 00:42:32 +0000 (02:42 +0200)]
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
Fix the following error in kernel log due to too long sound card name:
"
asoc-audio-graph-card sound: ASoC: driver name too long 'STM32MP1-AV96-HDMI' -> 'STM32MP1-AV96-H'
"
Fixes: e027da342772 ("ARM: dts: stm32: Add bindings for audio on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The USB device controller on Tegra210 and later supports one USB 2/3
port, so only a single pair of PHYs is needed. Drop any of the extra
PHYs from the bindings.
Jon Hunter [Fri, 26 May 2023 11:17:27 +0000 (12:17 +0100)]
arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
The PCIe slot on the Jetson Orin AGX is not working and PCIe cards
are not detected. The regulator for the 3.3V regulator for the PCIe is
using the wrong GPIO for turning on the regulator. Fix this by updating
the 3.3V regulator to use the correct GPIO.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Fri, 26 May 2023 11:37:35 +0000 (13:37 +0200)]
Merge tag 'renesas-dts-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.5
- Add partial display support for the RZ/G2L and RZ/V2L SoCs and the
RZ/G2L{,C} SMARC EVK development boards,
- Add camera support for the RZ/GV2L SoC and the RZ/V2L and RZ/G2LC
SMARC EVK development boards,
- Add Multi-Function Timer Pulse Unit 3 support for the RZ/G2L and
RZ/V2L SoCs,
- Add PWM support for the R-Car V3U SoC.
Arnd Bergmann [Fri, 26 May 2023 11:36:07 +0000 (13:36 +0200)]
Merge tag 'dt64-cleanup-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.5
Mostly minor improvements to fix dtbs_check warnings:
1. mba6ulx: use non-deprecated property for GPIO keys wake-up,
2. Add missing cache properties (APM, Amazon, HiSilicon, Realtek,
Synaptics, AllWinner, Microchip).
Few older minor and major fixes which were waiting on mailing lists for
longer time for Microchip SparX-5:
1. Fix secondary CPU bring-up and crash when talking to PSCI on reference
boards (Robert Marko),
2. Simplify CPU address-cells (Robert Marko),
3. Align pinctrl node names with bindings (Michael Walle).
Tony Lindgren [Wed, 17 May 2023 09:54:43 +0000 (12:54 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for dra7
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:55:25 +0000 (12:55 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for am4
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:25:03 +0000 (12:25 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for am33xx
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 10:35:51 +0000 (13:35 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for ti81xx
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:53:49 +0000 (12:53 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for omap5
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:52:53 +0000 (12:52 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for omap4
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:37:00 +0000 (12:37 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for omap2
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 17 May 2023 09:26:19 +0000 (12:26 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for omap3
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Ryan Wanner [Wed, 17 May 2023 11:54:06 +0000 (13:54 +0200)]
ARM: dts: at91: Return to boolean properties
Returning back to commit 0dc23d1a8e17
("arm: dts: at91: Fix boolean properties with values") as pinctrl driver no
longer expects an integer value and expects a simple boolean property.
The pcb8309 has 2 SMA connectors which are connected to the lan966x
chip. The lan966x can generate 1PPS output on one of them and it can
receive 1PPS input on the other one.
Linus Torvalds [Sun, 21 May 2023 20:58:37 +0000 (13:58 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
Linus Torvalds [Sun, 21 May 2023 18:53:52 +0000 (11:53 -0700)]
Merge tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
Linus Torvalds [Sun, 21 May 2023 17:55:31 +0000 (10:55 -0700)]
Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
Linus Torvalds [Sun, 21 May 2023 17:20:58 +0000 (10:20 -0700)]
Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two smb3 client fixes, both related to deferred close, and also for
stable:
- send close for deferred handles before not after lease break
response to avoid possible sharing violations
- check all opens on an inode (looking for deferred handles) when
lease break is returned not just the handle the lease break came in
on"
* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: drop reference to cfile before sending oplock break
SMB3: Close all deferred handles of inode in case of handle lease break
Mingwei Zhang [Tue, 9 May 2023 03:23:48 +0000 (03:23 +0000)]
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality") Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / thirdparty / linux.git / log
