Olof Johansson [Sat, 26 Sep 2020 17:15:52 +0000 (10:15 -0700)]
Merge tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings update for 5.10:
- Various board compatible string additions to fsl.ymal.
- Update Vybrid OCOTP binding for syscon compatible string, which is
required to access the UID.
* tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MN
dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
dt-bindings: arm: fsl: Add an entry for the i.MX6 LogicPD board
dt-bindings: arm: fsl: Fix matching Purism Librem5 phones
dt-bindings: arm: fsl: Add imx8mm ddr4 evk board
dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver
dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MM
dt-bindings: arm: fsl: Add binding for Variscite VAR-SOM-MX8MM module
dt-bindings: arm: fsl: Add ZII Ultra boards binding
dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
dt-bindings: arm: fsl: Add Beacon i.MX8M Mini Development Kit binding
dt-bindings: arm: fsl: Add the librem 5 phone
dt-bindings: arm: fsl: Add Y Soft IOTA Orion board
Olof Johansson [Sat, 26 Sep 2020 17:02:58 +0000 (10:02 -0700)]
Merge tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.10, part two
Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.
* tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Align OPP table name with dt-schema
arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433
Olof Johansson [Sat, 26 Sep 2020 17:02:35 +0000 (10:02 -0700)]
Merge tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Olof Johansson [Sat, 26 Sep 2020 17:01:51 +0000 (10:01 -0700)]
Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Olof Johansson [Sat, 26 Sep 2020 16:59:24 +0000 (09:59 -0700)]
Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
arm64: dts: apm: drop unused reg-io-width from DW APB GPIO controller
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
ARM: dts: picoxcell: drop unused reg-io-width from DW APB GPIO controller
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Olof Johansson [Sat, 26 Sep 2020 16:46:29 +0000 (09:46 -0700)]
Merge tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10
- Update the SP804 nodes to have the correct clocks and
clock names for the hi3620 SoC
- Update the SP805 nodes to have the correct clocks and
clock names for the hix5hd2 SoC
* tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix SP805 clocks
ARM: dts: hisilicon: Fix SP804 users
Olof Johansson [Sat, 26 Sep 2020 16:46:09 +0000 (09:46 -0700)]
Merge tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10
- Change the status properties from "ok" to "okay" for
all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
clock names for the hi3660 and hi6220 SoCs
* tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Fix SP805 clocks
arm64: dts: hisilicon: replace status value "ok" by "okay"
arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances
J721E Common Processor Board has PCIe connectors for the 1st three PCIe
instances. Configure the three PCIe instances in RC mode and disable the
4th PCIe instance.
All Purism Librem5 phones have three compatibles so they need their own
entry to fix dbts_check warnings like:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: /:
compatible: ['purism,librem5r2', 'purism,librem5', 'fsl,imx8mq'] is not valid under any of the given schemas
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: /:
compatible: ['purism,librem5r2', 'purism,librem5', 'fsl,imx8mq'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
David Heidelberg [Thu, 13 Aug 2020 21:34:01 +0000 (00:34 +0300)]
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
Summit SMB3xx series is a Programmable Switching Li+ Battery Charger.
This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358
chargers.
Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The compatible string for the Tegra210 APBMISC block was missing from
the bindings. Add it and while at it, rewrite the description of the
compatible string to make it clearer.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Wed, 16 Sep 2020 09:49:51 +0000 (10:49 +0100)]
arm64: tegra: Add label properties for EEPROMs
Populate the label property for the AT24 EEPROMs on the various Jetson
platforms. Note that the name 'module' is used to identify the EEPROM
on the processor module board and the name 'system' is used to identify
the EEPROM on the main base board (which is sometimes referred to as
the carrier board).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
ARM: dts: s5pv210: move fixed regulators under root node in Goni
The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:
regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: fixed-regulator@0:reg:0: [0] is too short
regulators: fixed-regulator@1:reg:0: [1] is too short
regulators: fixed-regulator@2:reg:0: [2] is too short
regulators: fixed-regulator@3:reg:0: [3] is too short
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:
regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: fixed-regulator@0:reg:0: [0] is too short
regulators: fixed-regulator@1:reg:0: [1] is too short
regulators: fixed-regulator@2:reg:0: [2] is too short
ARM: dts: at91: move mmc pinctrl-names property to board dts
Having the pinctrl-names property in the dtsi leads to dtbs_check warnings
when the board dts doesn't define pinctrl-0. Instead, move the property to
the board dts actually using the mmc node.
Lars Povlsen [Mon, 24 Aug 2020 20:30:07 +0000 (22:30 +0200)]
arm64: dts: sparx5: Add SPI controller and associated mmio-mux
This adds a SPI controller to the Microchip Sparx5 SoC, as well as the
mmio-mux that is required to select the right SPI interface for a
given SPI device.
Add the DRIF controller nodes for the r8a77990 (a.k.a. R-Car E3).
Please note that R-Car E3 has register BITCTR located at offset
0x80 (this register is not available on the r8a77960 and r8a77951,
whose support has already been upstreamed), and even though it is
not dealt with just yet within the driver, we have to keep that
into account with our device tree nodes.
Also, please note that while testing it has emerged that the
HW User Manual has the wrong DMA details for DRIF2 and DRIF3
on E3, as they are only allowed SYS-DMAC0 rather than SYS-DMAC1
and SYS-DMAC2. An errata addressing this issue will be available
soon.
arm64: dts: renesas: Drop superfluous pin configuration containers
As the pin configuration child nodes for EtherAVB on the Draak and Ebisu
boards contain only a single configuration, there is no need to wrap
them in additional grandchild containers. Hence remove the superfluous
level.
Andre Przywara [Mon, 7 Sep 2020 12:18:31 +0000 (13:18 +0100)]
ARM: dts: hisilicon: Fix SP805 clocks
The SP805 DT binding requires two clocks to be specified, but
Hisilicon platform DTs currently only specify one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux and U-Boot SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Andre Przywara [Mon, 7 Sep 2020 12:18:26 +0000 (13:18 +0100)]
ARM: dts: hisilicon: Fix SP804 users
The SP804 binding only specifies one or three clocks, but does not allow
just two clocks.
The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave
one "apb_pclk" clock-name to appease the primecell bus driver.
Extend the clocks by duplicating the first clock to the end of the clock
list, and add two dummy clock-names to make the primecell driver happy.
I don't know what the real APB clock for the IP is, but with the current
DT the first timer clock was used for that, so this change keeps the
current status.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Andre Przywara [Mon, 7 Sep 2020 12:18:29 +0000 (13:18 +0100)]
arm64: dts: hisilicon: Fix SP805 clocks
The SP805 DT binding requires two clocks to be specified, but
Hisilicon platform DTs currently only specify one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux and U-Boot SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
arm64: dts: hisilicon: replace status value "ok" by "okay"
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Olof Johansson [Sun, 13 Sep 2020 18:36:10 +0000 (11:36 -0700)]
Merge tag 'arm-soc/for-5.10/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.10,
please pull the following:
- Adrian changes the status properties from "ok" to "okay"
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for the Northstar 2 platform
* tag 'arm-soc/for-5.10/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix SP805 clock-names
arm64: dts: broadcom: replace status value "ok" by "okay"
Olof Johansson [Sun, 13 Sep 2020 18:34:24 +0000 (11:34 -0700)]
Merge tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:
- Christian adds support for the Cisco Meraki MR32 which is based on the
BCM53016 SoC, this requires specifying the PWM, second UART and third
PCIe controller in Device Tree before finally adding support for the
board.
- Adrian updates the status properties from "ok" to "okay".
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for both the Cygnus and Northstar Plus (NSP). He does the
same thing with the SP804 timer node which was missing an
"arm,primecell" compatible string.
- Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all
DRM changes are ready.
* tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Fix SP804 node
ARM: dts: NSP: Fix SP805 clock-names
ARM: dts: Cygnus: Fix SP805 clocks
ARM: dts: NSP: replace status value "ok" by "okay"
ARM: BCM5301X: Add DT for Meraki MR32
ARM: dts: bcm2711: Enable the display pipeline
ARM: dts: BCM5301X: Specify pcie2 in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify PWM in the DT
dt-bindings: ARM: add bindings for the Meraki MR32
Olof Johansson [Sun, 13 Sep 2020 18:32:36 +0000 (11:32 -0700)]
Merge tag 'dt64-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Various minor cleanups for arm64 Amazon DTS
Cleanup arm64 DTS to remove dtschema validation errors.
* tag 'dt64-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: alpine: Fix GIC unit address
arm64: dts: alpine: Align GIC nodename with dtschema
Olof Johansson [Sun, 13 Sep 2020 18:22:56 +0000 (11:22 -0700)]
Merge tag 'samsung-dt64-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.10
Cleanup of Exynos DTS to fix as many dtschema warnings as possible.
This includes adding missing compatibles and using non-deprecated
properties. Changes should not have a visible impact.
* tag 'samsung-dt64-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add compatibles to sysreg nodes
arm64: dts: exynos: Replace deprecated "gpios" i2c-gpio property in Exynos5433
Olof Johansson [Sun, 13 Sep 2020 18:22:36 +0000 (11:22 -0700)]
Merge tag 'samsung-dt-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10
1. Add sound support to Galaxy S3/Midas family (Exynos4412).
2. Add sound support to Galaxy S/Aries family (S5Pv210).
3. Configure L2C-310 cache controller via DTS on Exynos4.
4. Big cleanup of Exynos DTS to fix as many dtschema warnings as
possible. This includes adding missing properties (thus e.g.
enabling S3C RTC clock), correcting existing nodes, renaming of
nodes and using non-deprecated properties or compatibles. Except
mentioned bring up of S3C RTC, this should not have visible
effect.
* tag 'samsung-dt-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (49 commits)
ARM: dts: exynos: Silence SATA PHY warning in Exynos5250
ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boards
ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 node
ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420
ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring
ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring
ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250
ARM: dts: exynos: Override thermal by label in Exynos5250
ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5
ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale
ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410
ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC
ARM: dts: exynos: Correct compatible for Exynos5260 GIC
ARM: dts: exynos: Correct compatible for Exynos5 GIC
ARM: dts: s5pv210: Enable audio on Aries boards
ARM: dts: exynos: Correct whitespace and indentation issues
ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412
ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412
ARM: dts: exynos: Add CPU cooling in Tiny4412
ARM: dts: exynos: Add CPU cooling in SMDK4412
...
Olof Johansson [Sun, 13 Sep 2020 18:21:22 +0000 (11:21 -0700)]
Merge tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10
- Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H
board, and its display panel expansion board,
- Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M)
and Qseven board (G21D),
- SATA support for the HopeRun HiHope RZ/G2N board,
- PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs,
- Audio support for the R-Car M3-W+ SoC.
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (39 commits)
arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display
arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores
arm64: dts: renesas: r8a774e1: Add FDP1 device nodes
ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller
ARM: dts: r8a7742: Add IPMMU DT nodes
arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC
arm64: dts: renesas: r8a774e1: Add PWM device nodes
ARM: dts: r8a7742-iwg21m: Add SPI NOR support
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode
ARM: dts: r8a7742-iwg21m: Add RTC support
ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically
ARM: dts: r8a7742: Add CAN support
arm64: dts: renesas: r8a774c0: Add PCIe EP node
arm64: dts: renesas: r8a774b1: Add PCIe EP nodes
arm64: dts: renesas: r8a774a1: Add PCIe EP nodes
ARM: dts: r8a7742: Add QSPI support
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks
arm64: dts: renesas: r8a774e1: Add LVDS device node
arm64: dts: renesas: r8a774e1: Populate HDMI encoder node
arm64: dts: renesas: r8a774e1: Populate DU device node
...
ARM: dts: zx: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@c00000: $nodename:0:
'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jun Nie <jun.nie@linaro.org>
ARM: dts: tango: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@20100000: $nodename:0:
'l2-cache-controller@20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mans Rullgard <mans@mansr.com>
ARM: dts: prima: Align L2 cache-controller nodename with dtschema
Fix dtschema validator warnings like:
l2-cache-controller@80040000: $nodename:0:
'l2-cache-controller@80040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Barry Song <baohua@kernel.org>
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
The purpose of those assigned-clock-* properties is to configure clock for
the I2S device so move them to respective node. This silences the
dtschema warnings like:
ARM: dts: exynos: add input clock to CMU in Exynos3250
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node
for exynos3250") added assigned clocks under Clock Management Unit to
fix hangs when accessing ISP registers.
However the dtschema expects "clocks" property if "assigned-clocks" are
used. Add reference to input clock to silence the dtschema warnings:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks'
arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433
Few I2S device node properties were not documented and not used by any
of the drivers. Remove them to fix dtbs_check warning:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2s@14d60000:
Additional properties are not allowed ('samsung,supports-rstclr', 'samsung,supports-tdm',
'samsung,supports-6ch', 'samsung,supports-low-rfs' were unexpected)
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: xti@0:reg:0: [0] is too short
clocks: 'ranges' is a required property
xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
The CPU nodes should be described as children of "cpus" bus node with
appropriate "reg" properties:
cpus: '#address-cells' is a required property
cpus: '#size-cells' is a required property
cpu: 'device_type' is a required property
cpu: 'reg' is a required property
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
According to Devicetree Specification v0.2 and later, Section "Generic
Names Recommendation", the node name for a pin controller device node
should be "pinctrl".