Masahisa Kojima [Thu, 11 Jan 2024 05:35:40 +0000 (14:35 +0900)]
efi_loader: support fmp versioning for multi bank update
This commit stores the firmware version into the array
of fmp_state structure to support the fmp versioning
for multi bank update. The index of the array is identified
by the bank index.
This modification keeps the backward compatibility with
the existing versioning feature.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Thu, 11 Jan 2024 05:35:39 +0000 (14:35 +0900)]
fwu: fix fwu_get_image_index interface
The capsule update uses the DFU framework for updating
storage. fwu_get_image_index() currently returns the
image_index calculated by (dfu_alt_num + 1), but this is
different from the image_index in UEFI terminology.
Since capsule update implementation calls dfu_write_by_alt
function, it is better that FWU returns the dfu_alt_num.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
efi_loader: Clean up efi_dp_append and efi_dp_concat
Looking back at the initrd storing functionality, we introduced three
functions, efi_dp_append_or_concatenate(), efi_dp_append/concat(). In
hindsight we could have simplified that by a lot. First of all none of
the functions append anything. They all allocate a new device path and
concatenate the contents of two device paths in one. A boolean parameter
controls the final device path -- if that's true an end node is injected
between the two device paths.
So let's rewrite this and make it a bit easier to read. Get rid of
efi_dp_append(), efi_dp_concat() and rename
efi_dp_append_or_concatenate() to efi_dp_concat(). This is far more
intuitive and the only adjustment that is needed is an extra boolean
argument on all callsites.
doc: fix three-dash references in reStructuredText
The "Sending patches" and "Patman patch manager" documents refer to the
three-dash, "---", that separates patch parts. The symbol is written in
the documentation in the same form as it is in actual patches: as three
U+002D HYPHEN-MINUS characters. When building the documentation, Sphinx
converts this symbol to a U+2014 EM DASH, that is invalid in this case.
Make the three-dash symbol a reStructuredText inline literal to prevent
its conversion; that is, enclose it in a pair of double backquotes (`).
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Masahisa Kojima [Mon, 18 Dec 2023 09:57:41 +0000 (18:57 +0900)]
efi_loader: fix iteration of FMP protocols
If one of the FMP protocols fails when calling GetImageInfo(),
populating the ESRT ends up with failure and other FMP protocols
are not added to the ESRT. We should still add all other FMP
protocols to the ESRT.
With this commit, iteration of all FMP protocols continues
even though one of the FMP protocols fails.
Tom Rini [Fri, 12 Jan 2024 13:34:50 +0000 (08:34 -0500)]
Merge branch '2024-01-12-assorted-fixes'
- Allow defconfigs to #include files (so we can construct a defconfig
from fragments), update phy-mtk-tphy binding, assorted test fixes,
allow building host tools without cryptographic libraries again,
android_ab bugfix, and make some SPL debugging cases easier.
Paul-Erwan Rio [Thu, 21 Dec 2023 07:26:11 +0000 (08:26 +0100)]
tools: fix build without LIBCRYPTO support
Commit cb9faa6f98ae ("tools: Use a single target-independent config to
enable OpenSSL") introduced a target-independent configuration to build
crypto features in host tools.
But since commit 2c21256b27d7 ("hash: Use Kconfig to enable hashing in
host tools and SPL") the build without OpenSSL is broken, due to FIT
signature/encryption features. Add missing conditional compilation
tokens to fix this.
Signed-off-by: Paul-Erwan Rio <paulerwan.rio@gmail.com> Tested-by: Alexander Dahl <ada@thorsis.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Alexander Dahl [Thu, 21 Dec 2023 07:26:10 +0000 (08:26 +0100)]
tools: kwbimage: Allow disabling build on non-mvebu platforms
Some users want to build with CONFIG_TOOLS_LIBCRYPTO disabled, which in
general is possible for at least some boards. 32-bit mvebu however
requires kwbimage for building SPL, and kwbimage has a hard dependency
to host OpenSSL.
The new symbol CONFIG_TOOLS_KWBIMAGE allows disabling kwbimage build on
non-mvebu platforms, and thus building without host libcrypto from
OpenSSL.
Based on previous work and discussions, see links below.
Peter Robinson [Tue, 19 Dec 2023 22:01:50 +0000 (22:01 +0000)]
test: fs: fs-test: Move the tests to use sha256sum
Move the use of md5s for recording filesystem file integrity
checks to sha256 hashes as they're preferred due to being
less likely to produce clashing hashes. In the process
generalise some of the wording to use the more generic
hash term.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Csókás Bence [Tue, 19 Dec 2023 13:33:18 +0000 (14:33 +0100)]
arm: spl: Use separate fault handlers instead of a single common one
It may be necessary to set breakpoints etc. on a specific fault handler in SPL.
Add a Kconfig option to separate the different handlers into their own individual infinite loops.
cmd/cedit.c:258:(.text.do_cedit_run+0x4c):
undefined reference to `expo_apply_theme
Fix the dependencies.
Fixes: a0874dc4ac71 ("expo: Add a configuration editor") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Fri, 15 Dec 2023 23:54:16 +0000 (16:54 -0700)]
boot: Support decompressing non-kernel OS images
Sometimes the kernel is built as an EFI application rather than a
binary. We still want to support compression for this case.
For arm64 the entry point is set later in the bootm_load_os() function,
since these images are typically relocated due to the 2MB-alignment
requirement of arm64 images. But since the EFI image is not in the same
format, we need to update the entry point earlier.
Set the entry point always, for kernel_noload to resolve this problem.
It should be harmless to do this always.
Maxim Uvarov [Tue, 26 Dec 2023 15:46:15 +0000 (21:46 +0600)]
driver/net/rtl8139: remove debug print
debug print delays reset of the driver. Finally I see
bunch of "rx error FFFF" errors in the screen. CI can
not handle many prints. While network works fine there
Robert Marko [Wed, 29 Nov 2023 10:11:08 +0000 (11:11 +0100)]
arm: mvebu: eDPU: support new board revision
There is a new eDPU revision that uses Marvell 88E6361 switch onboard.
We can rely on detecting the switch to enable and fixup the Linux DTS
so a single DTS can be used.
There is currently no support for the 88E6361 switch and thus no working
networking in U-Boot, so we disable both ports.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
Chris Packham [Fri, 27 Oct 2023 00:44:11 +0000 (13:44 +1300)]
arm: mvebu: AC5: Use finer grained memory map
The ATF implementation for AC5/AC5X ends up with bl31 living in some
internal SRAM. This is in the middle of the large MMIO region that we
were using. Adjust this to be finer grained blocks based on the address
map from the AC5X Family Control and Management Subsystem Functional
Datasheet.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tom Rini [Tue, 9 Jan 2024 17:50:04 +0000 (12:50 -0500)]
Merge tag 'smbios-2024-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request smbios-2024-04-rc1
* make table_compute_checksum() arguments const
* remove duplicate function verify_checksum()
* enable setting processor family > 0xff
* set correct SMBIOS processor family value for RISC-V
* avoid importing ofnode.h in smbios.h
* provide a UEFI tool to dump SMBIOS table
Sam Protsenko [Thu, 30 Nov 2023 20:13:50 +0000 (14:13 -0600)]
pinctrl: exynos: Refactor handling the pin related dt properties
All pin related dt properties (pin-function, pin-pud and pin-drv) are
handled in a very similar way. Get rid of that code duplication by
extracting the corresponding data knowledge into an actual data
structure (array), and then just iterating over it.
No functional change, it's a refactoring commit.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Sam Protsenko [Thu, 30 Nov 2023 20:13:49 +0000 (14:13 -0600)]
pinctrl: exynos: Support different register types in pin banks
Get rid of hard-coded register offsets and widths. Instead provide a way
for pinctrl drivers to specify different pin bank register offsets and
widths. This in turn makes it possible to add support for new SoCs that
have registers with offset/width values different than generic ones
already available in pinctrl-exynos driver.
Offset constants (now unused in pinctrl-exynos.c) are moved to
pinctrl-exynos7420 driver, which is the single user of those constants.
The design of this patch follows Linux kernel pinctrl-exynos driver
design, in terms of added data structures and types. This patch doesn't
add support for any new SoCs and shouldn't introduce any functional
changes.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Sam Protsenko [Thu, 30 Nov 2023 20:13:48 +0000 (14:13 -0600)]
pinctrl: exynos: Rework pin_to_bank_base() to obtain data by name
Rework pin_to_bank_base() function to obtain bank data structure by bank
name instead of getting bank base address by pin name, and rename it to
get_bank() to reflect this change. This in turn leads to the extraction
of parse_pin(), so the caller has to use it before calling get_bank().
No functional change. This is a refactoring commit which prepares
pinctrl driver code for handling different sizes of register fields,
which will be added next.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Sam Protsenko [Thu, 30 Nov 2023 20:13:47 +0000 (14:13 -0600)]
pinctrl: exynos: Extract pin parsing code into a separate function
Next commits are going to re-design the pin_to_bank_base() function and
its usage in a way that the pin parsing code will be called separately.
Extract it into a separate function first, as a refactoring commit.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Ion Agorria [Fri, 5 Jan 2024 07:22:12 +0000 (09:22 +0200)]
test: hush: dollar: fix bugous behavior
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With
lib: membuff: fix readline not returning line in case of overflow
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
ut_assert_console_end();
Same thing should be done with the if block mentioned above that calls
console_record_reset_enable().
Tom Rini [Tue, 9 Jan 2024 14:00:39 +0000 (09:00 -0500)]
Merge tag 'rng-2024-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request rng-2024-04-rc1
QEMU does not provide information in the device-tree if the ARMv8.5 RNDR
or the RISC-V Zkr RNG have been enabled on the command line.
In different parts of our code we assume that the first RNG device is the
one to be used. Therefore it is preferable to detect the availability of
said devices already in the bind method.
There has been a related discussion if the U_BOOT_DRVINFO() macro should be
used for architectural devices
(https://lore.kernel.org/u-boot/20231031125552.26698-1-heinrich.schuchardt@canonical.com/).
This aspect is not touched by this series.
Ion Agorria [Fri, 5 Jan 2024 07:22:09 +0000 (09:22 +0200)]
common: console: record console from the beginning
Set flag to enable console record on console_record_init
and not only on console_record_reset_enable. This fixes
missing start of U-Boot log for fastboot oem console
command.
Ion Agorria [Fri, 5 Jan 2024 07:22:07 +0000 (09:22 +0200)]
fastboot: implement "getvar all"
This commit implements "fastboot getvar all" listing
by iterating the existing dispatchers that don't require
parameters (as we pass NULL), uses fastboot multiresponse.
Ion Agorria [Fri, 5 Jan 2024 07:22:06 +0000 (09:22 +0200)]
fastboot: multiresponse support
Currently u-boot fastboot can only send one message back to host,
so if there is a need to print more than one line messages must be
kept sending until all the required data is obtained. This behavior
can be adjusted using multiresponce ability (getting multiple lines
of response) proposed in this patch.
cpu: riscv: set correct SMBIOS processor family value
The SMBIOS specification requires to set the processor family in the type 4
(Processor Information) table to specific values depending only on the
bitness of the system (0x200 for RV32 and 0x201 for RV64).
With this patch dmidecode shows
Handle 0x0004, DMI type 4, 48 bytes
Processor Information
Socket Designation: Not Specified
Type: Central Processor
Family: RV64
for qemu-riscv64_smode_defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Many value of processor type exceed 0xff and have to be stored as u16
value. In the type 4 table set processor_family = 0xfe signaling that
field processor_family2 is used and write the actual value into the
processor_family2 field.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
lib: make table_compute_checksum() arguments const
table_compute_checksum() does neither changes the content of the
checksummed buffer nor the buffer length. Adding const to the
definition makes the function wider usable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The existence of devices should be checked in the bind method and not in
the probe method. Adjust the RISC-V Zkr RNG driver accordingly.
Use ENOENT (and not ENODEV) to signal that the device is not available.
Fixes: ceec977ba1a9 ("rng: Provide a RNG based on the RISC-V Zkr ISA extension") Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
In different parts of our code we assume that the first RNG device is the
one to be used. Therefore it is preferable to detect the availability of
the RNDR register already in the bind method.
For signaling the non-existence of a device the driver model requires using
ENOENT (and not ENODEV).
Fixes: 31565bb0aa2d ("driver: rng: Add DM_RNG interface for ARMv8.5 RNDR registers") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com>
Tom Rini [Mon, 8 Jan 2024 18:39:00 +0000 (13:39 -0500)]
Merge tag 'u-boot-imx-master-20240108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
- Removed fdt_addr from verdin-imx8mm to fix booting via bootefi.
- Support Ethernet PHY autodection on Data Modul i.MX8M Mini/Plus eDM
SBC
- Add i.MX93 binman support
- Add support for imx93-var-som
Mathieu Othacehe [Fri, 29 Dec 2023 10:55:23 +0000 (11:55 +0100)]
Add imx93-var-som support
Add support for the Variscite VAR-SOM-IMX93 evaluation kit. The SoM
consists of an NXP iMX93 dual A55 CPU. The SoM is mounted on a Variscite
Symphony SBC.
fdt_addr variable is the location in flash of the device tree blob [1], it
does not exist for verdin-imx8mm.
Because of this the bootefi command fails unless the optional
`[fdt address]` parameter is passed on the command line,
bootefi.c:efi_install_fdt() assumes that `fdt_addr` is valid when
present.
Fix this removing fdt_addr from the U-Boot environment.
[1] doc/usage/environment.rst
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
Marek Vasut [Mon, 1 Jan 2024 21:05:54 +0000 (22:05 +0100)]
ARM: imx: Auto-detect PHY on Data Modul i.MX8M Mini/Plus eDM SBC
Implement fdtdec_board_setup() auto-detection of ethernet PHY.
This uses properties of the hardware and pull resistor placement.
If GPIO1_16 RGMII_MDC is HIGH, then R530 (MX8MM eDM SBC) or
R390 (MX8MP eDM SBC) is populated. R530 or R390 is populated
only on boards with AR8031 PHY.
If GPIO1_16 RGMII_MDC is LOW, then the in-SoM pull down is the
dominant pull resistor. This is the case on boards with BCM54213PE
PHY.
In case AR8031 PHY is populated, the PHY MDIO address is 0, in
case BCM54213PE PHY is populated, the PHY MDIO address is 1, the
fdtdec_board_setup() is used to patch the correct address into
the U-Boot control DT.
Enable broadcom PHY support to support both PHYs.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
Add fields for the location of ACPI tables to the global data.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
We have two implementations of write_acpi_tables(). One for writing ACPI
tables based on ACPI_WRITER() entries another based on copying tables from
QEMU.
Create a symbol CONFIG_QFW_ACPI that signifies copying ACPI tables from
QEMU and use it consistently.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
acpi: support 64bit in acpi_find_table for DSDT and FACS
Use X_DSDT and X_FIRMWARE_CTRL if available.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Rebased on -next to use nomap: Signed-off-by: Simon Glass <sjg@chromium.org>
On non x86 platforms the hardware reduce flag must be set in the FADT
table. Write an error message if the flag is missing.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Rebased on -next to use nomap, add hyphens: Signed-off-by: Simon Glass <sjg@chromium.org>
If field X_FIRMWARE_CTRL is filled, field FIRMWARE must be ignored. If
field X_DSDT is filled, field DSDT must be ignored.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Rebased on -next to use nomap: Signed-off-by: Simon Glass <sjg@chromium.org>
Fields X_FIRMWAE_CTRL and X_DSDT must be 64bit wide. Convert pointers to
to uintptr_t to fill these.
If field X_FIRMWARE_CTRL is filled, field FIRMWARE must be ignored. If
field X_DSDT is filled, field DSDT must be ignored. We should not fill
unused fields.
See the field definitions in chapter "5.2.9 Fixed ACPI Description Table
(FADT)" of the ACPI Specification 6.5.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 4 Jan 2024 01:49:19 +0000 (18:49 -0700)]
fdt: Allow the devicetree to come from a bloblist
Standard passage provides for a bloblist to be passed from one firmware
phase to the next. That can be used to pass the devicetree along as well.
Add an option to support this.
Tests for this will be added as part of the Universal Payload work.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Sun, 31 Dec 2023 15:25:55 +0000 (08:25 -0700)]
efi: Correct smbios-table installation
At present this code allocates memory when writing the tables and
then unnecessarily adds another memory map when installing it.
Adjust the code to allocate the tables using the normal U-Boot
mechanism. This avoids doing an EFI memory allocation early in
U-Boot, which may use memory that would be overwritten by a
'load' command, for example.
Simon Glass [Sun, 31 Dec 2023 15:25:54 +0000 (08:25 -0700)]
acpi: Write pointers to tables instead of addresses
Sandbox uses an API to map between addresses and pointers. This allows
it to have (emulated) memory at zero and avoid arch-specific addressing
details. It also allows memory-mapped peripherals to work.
As an example, on many machines sandbox maps address 100 to pointer
value 10000000.
However this is not correct for ACPI, if sandbox starts another program
(e.g EFI app) and passes it the tables. That app has no knowledge of
sandbox's address mapping. So to make this work we want to store 10000000 as the value in the table.
Add two new 'nomap' functions which clearly make this exeption to how
sandbox works.
This should allow EFI apps to access ACPI tables with sandbox, e.g. for
testing purposes.
Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Sun, 31 Dec 2023 15:25:49 +0000 (08:25 -0700)]
efi: Use the correct GUID for the SMBIOS table
EFI does not use the 'anchor string' to determine the SMBIOS table
version, instead preferring to have two separate GUIDs. Use the correct
one, depending on the table version.
Call unmap_system() to balance to the use of map_sysmem()
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Sun, 31 Dec 2023 15:25:47 +0000 (08:25 -0700)]
smbios: Use SMBIOS 3.0 to support an address above 4GB
When the SMBIOS table is written to an address above 4GB a 32-bit table
address is not large enough.
Use an SMBIOS3 table in that case.
Note that we cannot use efi_allocate_pages() since this function has
nothing to do with EFI. There is no equivalent function to allocate
memory below 4GB in U-Boot. One solution would be to create a separate
malloc() pool, or just always put the malloc() pool below 4GB.
- Use log_debug() for warning
- Rebase on Heinrich's smbios.h patch
- Set the checksum for SMBIOS3
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
projects / thirdparty / u-boot.git / log
