fetch: use `fetch_config` to store "fetch.recurseSubmodules" value
Move the parsed "fetch.recurseSubmodules" config value into the
`fetch_config` structure. This reduces our reliance on global variables
and further unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: use `fetch_config` to store "fetch.showForcedUpdates" value
Move the parsed "fetch.showForcedUpdaets" config value into the
`fetch_config` structure. This reduces our reliance on global variables
and further unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: use `fetch_config` to store "fetch.pruneTags" value
Move the parsed "fetch.pruneTags" config value into the `fetch_config`
structure. This reduces our reliance on global variables and further
unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: use `fetch_config` to store "fetch.prune" value
Move the parsed "fetch.prune" config value into the `fetch_config`
structure. This reduces our reliance on global variables and further
unifies the way we parse the configuration in git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `fetch_config` structure currently only has a single member, which
is the `display_format`. We're about extend it to contain all parsed
config values and will thus need it available in most of the code.
Prepare for this change by passing through the `fetch_config` directly
instead of only passing its single member.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the `NULL` check for `remote_ref` in `update_local_ref()`. The
function only has a single caller, and that caller always passes in a
non-`NULL` value.
This fixes a false positive in Coverity.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: drop unused DISPLAY_FORMAT_UNKNOWN enum value
With 50957937f9 (fetch: introduce `display_format` enum, 2023-05-10), a
new enumeration was introduced to determine the display format that is
to be used by git-fetch(1). The `DISPLAY_FORMAT_UNKNOWN` value isn't
ever used though, and neither do we rely on the explicit `0` value for
initialization anywhere.
Remove the enum value.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 15 May 2023 20:59:07 +0000 (13:59 -0700)]
Merge branch 'ps/fetch-output-format'
"git fetch" learned the "--porcelain" option that emits what it did
in a machine-parseable format.
* ps/fetch-output-format:
fetch: introduce machine-parseable "porcelain" output format
fetch: move option related variables into main function
fetch: lift up parsing of "fetch.output" config variable
fetch: introduce `display_format` enum
fetch: refactor calculation of the display table width
fetch: print left-hand side when fetching HEAD:foo
fetch: add a test to exercise invalid output formats
fetch: split out tests for output format
fetch: fix `--no-recurse-submodules` with multi-remote fetches
The "--stdin" option of "git name-rev" has been replaced with
the "--annotate-stdin" option more than a year ago. We stop
advertising it in the "git name-rev -h" output.
* jc/name-rev-deprecate-stdin-further:
name-rev: make --stdin hidden
Junio C Hamano [Mon, 15 May 2023 20:59:03 +0000 (13:59 -0700)]
Merge branch 'kh/doc-interpret-trailers-updates'
Doc update.
* kh/doc-interpret-trailers-updates:
doc: interpret-trailers: fix example
doc: interpret-trailers: don’t use deprecated config
doc: interpret-trailers: use input redirection
doc: interpret-trailers: don’t use heredoc in examples
Junio C Hamano [Mon, 15 May 2023 20:59:03 +0000 (13:59 -0700)]
Merge branch 'gc/trace-bare-repo-setup'
The tracing mechanism learned to notice and report when
auto-discovered bare repositories are being used, as allowing so
without explicitly stating the user intends to do so (with setting
GIT_DIR for example) can be used with social engineering as an
attack vector.
* gc/trace-bare-repo-setup:
setup: trace bare repository setups
The documentation was misleading about the interaction between
GIT_DEFAULT_HASH and "git clone", which has been clarified to
stress that the variable is to be ignored by the command.
* jc/doc-clarify-git-default-hash-variable:
doc: GIT_DEFAULT_HASH is and will be ignored during "clone"
Error messages given when working on an unborn branch that is
checked out in another worktree have been improved.
* rj/branch-unborn-in-other-worktrees:
branch: avoid unnecessary worktrees traversals
branch: rename orphan branches in any worktree
branch: description for orphan branch errors
branch: use get_worktrees() in copy_or_rename_branch()
branch: test for failures while renaming branches
Derrick Stolee [Wed, 10 May 2023 19:07:34 +0000 (19:07 +0000)]
merge-tree: load default git config
The 'git merge-tree' command handles creating root trees for merges
without using the worktree. This is a critical operation in many Git
hosts, as they typically store bare repositories.
This builtin does not load the default Git config, which can have
several important ramifications.
In particular, one config that is loaded by default is
core.useReplaceRefs. This is typically disabled in Git hosts due to
the ability to spoof commits in strange ways.
Since this config is not loaded specifically during merge-tree, users
were previously able to use refs/replace/ references to make pull
requests that looked valid but introduced malicious content. The
resulting merge commit would have the correct commit history, but the
malicious content would exist in the root tree of the merge.
The fix is simple: load the default Git config in cmd_merge_tree().
This may also fix other behaviors that are effected by reading default
config. The only possible downside is a little extra computation time
spent reading config. The config parsing is placed after basic argument
parsing so it does not slow down usage errors.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: introduce machine-parseable "porcelain" output format
The output of git-fetch(1) is obviously designed for consumption by
users, only: we neatly columnize data, we abbreviate reference names, we
print neat arrows and we don't provide information about actual object
IDs that have changed. This makes the output format basically unusable
in the context of scripted invocations of git-fetch(1) that want to
learn about the exact changes that the command performs.
Introduce a new machine-parseable "porcelain" output format that is
supposed to fix this shortcoming. This output format is intended to
provide information about every reference that is about to be updated,
the old object ID that the reference has been pointing to and the new
object ID it will be updated to. Furthermore, the output format provides
the same flags as the human-readable format to indicate basic conditions
for each reference update like whether it was a fast-forward update, a
branch deletion, a rejected update or others.
We assume two conditions which are generally true:
- The old and new object IDs have fixed known widths and cannot
contain spaces.
- References cannot contain newlines.
With these assumptions, the output format becomes unambiguously
parseable. Furthermore, given that this output is designed to be
consumed by scripts, the machine-readable data is printed to stdout
instead of stderr like the human-readable output is. This is mostly done
so that other data printed to stderr, like error messages or progress
meters, don't interfere with the parseable data.
A notable ommission here is that the output format does not include the
remote from which a reference was fetched, which might be important
information especially in the context of multi-remote fetches. But as
such a format would require us to print the remote for every single
reference update due to parallelizable fetches it feels wasteful for the
most likely usecase, which is when fetching from a single remote.
In a similar spirit, a second restriction is that this cannot be used
with `--recurse-submodules`. This is because any reference updates would
be ambiguous without also printing the repository in which the update
happens.
Considering that both multi-remote and submodule fetches are user-facing
features, using them in conjunction with `--porcelain` that is intended
for scripting purposes is likely not going to be useful in the majority
of cases. With that in mind these restrictions feel acceptable. If
usecases for either of these come up in the future though it is easy
enough to add a new "porcelain-v2" format that adds this information.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: move option related variables into main function
The options of git-fetch(1) which we pass to `parse_options()` are
declared globally in `builtin/fetch.c`. This means we're forced to use
global variables for all the options, which is more likely to cause
confusion than explicitly passing state around.
Refactor the code to move the options into `cmd_fetch()`. Move variables
that were previously forced to be declared globally and which are only
used by `cmd_fetch()` into function-local scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: lift up parsing of "fetch.output" config variable
Parsing the display format happens inside of `display_state_init()`. As
we only need to check for a simple config entry, this is a natural
location to put this code as it means that display-state logic is neatly
contained in a single location.
We're about to introduce a new "porcelain" output format though that is
intended to be parseable by machines, for example inside of a script.
This format can be enabled by passing the `--porcelain` switch to
git-fetch(1). As a consequence, we'll have to add a second callsite that
influences the output format, which will become awkward to handle.
Refactor the code such that callers are expected to pass the display
format that is to be used into `display_state_init()`. This allows us to
lift up the code into the main function, where we can then hook it into
command line options parser in a follow-up commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have two different display formats in git-fetch(1) with the
"full" and "compact" formats. This is tracked with a boolean value that
simply denotes whether the display format is supposed to be compacted
or not. This works reasonably well while there are only two formats, but
we're about to introduce another format that will make this a bit more
awkward to use.
Introduce a `enum display_format` that is more readily extensible.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: refactor calculation of the display table width
When displaying reference updates, we try to print the references in a
neat table. As the table's width is determined its contents we thus need
to precalculate the overall width before we can start printing updated
references.
The calculation is driven by `display_state_init()`, which invokes
`refcol_width()` for every reference that is to be printed. This split
is somewhat confusing. For one, we filter references that shall be
attributed to the overall width in both places. And second, we
needlessly recalculate the maximum line length based on the terminal
columns and display format for every reference.
Refactor the code so that the complete width calculations are neatly
contained in `refcol_width()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: print left-hand side when fetching HEAD:foo
`store_updated_refs()` parses the remote reference for two purposes:
- It gets used as a note when writing FETCH_HEAD.
- It is passed through to `display_ref_update()` to display
updated references in the following format:
```
* branch master -> master
```
In most cases, the parsed remote reference is the prettified reference
name and can thus be used for both cases. But if the remote reference is
HEAD, the parsed remote reference becomes empty. This is intended when
we write the FETCH_HEAD, where we skip writing the note in that case.
But when displaying the updated references this leads to inconsistent
output where the left-hand side of reference updates is missing in some
cases:
```
$ git fetch origin HEAD HEAD:explicit-head :implicit-head main
From https://github.com/git/git
* branch HEAD -> FETCH_HEAD
* [new ref] -> explicit-head
* [new ref] -> implicit-head
* branch main -> FETCH_HEAD
```
This behaviour has existed ever since the table-based output has been
introduced for git-fetch(1) via 165f390250 (git-fetch: more terse fetch
output, 2007-11-03) and was never explicitly documented either in the
commit message or in any of our tests. So while it may not be a bug per
se, it feels like a weird inconsistency and not like it was a concious
design decision.
The logic of how we compute the remote reference name that we ultimately
pass to `display_ref_update()` is not easy to follow. There are three
different cases here:
- When the remote reference name is "HEAD" we set the remote
reference name to the empty string. This is the case that causes
the left-hand side to go missing, where we would indeed want to
print "HEAD" instead of the empty string. This is what
`prettify_refname()` would return.
- When the remote reference name has a well-known prefix then we
strip this prefix. This matches what `prettify_refname()` does.
- Otherwise, we keep the fully qualified reference name. This also
matches what `prettify_refname()` does.
As the return value of `prettify_refname()` would do the correct thing
for us in all three cases, we can thus fix the inconsistency by passing
through the full remote reference name to `display_ref_update()`, which
learns to call `prettify_refname()`. At the same time, this also
simplifies the code a bit.
Note that this patch also changes formatting of the block that computes
the "kind" (which is the category like "branch" or "tag") and "what"
(which is the prettified reference name like "master" or "v1.0")
variables. This is done on purpose so that it is part of the diff,
hopefully making the change easier to comprehend.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to introduce a new porcelain mode for the output of
git-fetch(1). As part of that we'll be introducing a set of new tests
that only relate to the output of this command.
Split out tests that exercise the output format of git-fetch(1) so that
it becomes easier to verify this functionality as a standalone unit. As
the tests assume that the default branch is called "main" we set up the
corresponding GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME environment variable
accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: fix `--no-recurse-submodules` with multi-remote fetches
When running `git fetch --no-recurse-submodules`, the exectation is that
we don't fetch any submodules. And while this works for fetches of a
single remote, it doesn't when fetching multiple remotes at once. The
result is that we do recurse into submodules even though the user has
explicitly asked us not to.
This is because while we pass on `--recurse-submodules={yes,on-demand}`
if specified by the user, we don't pass on `--no-recurse-submodules` to
the subprocess spawned to perform the submodule fetch.
Fix this by also forwarding this flag as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 10 May 2023 17:23:27 +0000 (10:23 -0700)]
Merge branch 'hx/negotiator-non-recursive'
The implementation of the default "negotiator", used to find common
ancestor over the network for object tranfer, used to be recursive;
it was updated to be iterative to conserve stackspace usage.
* hx/negotiator-non-recursive:
negotiator/skipping: fix some problems in mark_common()
negotiator/default: avoid stack overflow
Junio C Hamano [Wed, 10 May 2023 17:23:27 +0000 (10:23 -0700)]
Merge branch 'tb/credential-long-lines'
The implementation of credential helpers used fgets() over fixed
size buffers to read protocol messages, causing the remainder of
the folded long line to trigger unexpected behaviour, which has
been corrected.
* tb/credential-long-lines:
contrib/credential: embiggen fixed-size buffer in wincred
contrib/credential: avoid fixed-size buffer in libsecret
contrib/credential: .gitignore libsecret build artifacts
contrib/credential: remove 'gnome-keyring' credential helper
contrib/credential: avoid fixed-size buffer in osxkeychain
t/lib-credential.sh: ensure credential helpers handle long headers
credential.c: store "wwwauth[]" values in `credential_read()`
Junio C Hamano [Tue, 9 May 2023 23:45:45 +0000 (16:45 -0700)]
Merge branch 'en/header-split-cache-h-part-2'
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
The detect-compilers script to help auto-tweaking the build system
had trouble working with compilers whose version number has extra
suffixes. The script has been taught that certain suffixes (like
"-win32" in "gcc 10-win32") can be safely stripped as they share
the same features and bugs with the version without the suffix.
* mh/fix-detect-compilers-with-nondigit-versions:
Handle some compiler versions containing a dash
The commit object parser has been taught to be a bit more lenient
to parse timestamps on the author/committer line with a malformed
author/committer ident.
* jk/parse-commit-with-malformed-ident:
parse_commit(): describe more date-parsing failure modes
parse_commit(): handle broken whitespace-only timestamp
parse_commit(): parse timestamp from end of line
t4212: avoid putting git on left-hand side of pipe
Shuqi Liang [Tue, 9 May 2023 19:42:41 +0000 (15:42 -0400)]
diff-files: integrate with sparse index
Remove full index requirement for `git diff-files`. Refactor the
ensure_expanded and ensure_not_expanded functions by introducing a
common helper function, ensure_index_state. Add test to ensure the index
is no expanded in `git diff-files`.
The `p2000` tests demonstrate a ~96% execution time reduction for 'git
diff-files' and a ~97% execution time reduction for 'git diff-files'
for a file using a sparse index:
Shuqi Liang [Tue, 9 May 2023 19:42:40 +0000 (15:42 -0400)]
t1092: add tests for `git diff-files`
Before integrating the 'git diff-files' builtin with the sparse index
feature, add tests to t1092-sparse-checkout-compatibility.sh to ensure
it currently works with sparse-checkout and will still work with sparse
index after that integration.
When adding tests against a sparse-checkout definition, we test two
modes: all changes are within the sparse-checkout cone and some changes
are outside the sparse-checkout cone.
In order to have staged changes outside of the sparse-checkout cone,
make a directory called 'folder1' and copy `a` into 'folder1/a'.
'folder1/a' is identical to `a` in the base commit. These make
'folder1/a' in the index, while leaving it outside of the
sparse-checkout definition. Change content inside 'folder1/a' in order
to test 'folder1/a' being present on-disk with modifications.
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 8 May 2023 19:04:57 +0000 (15:04 -0400)]
t: drop "verbose" helper function
We have a small helper function called "verbose", with the idea that you
can write:
verbose foo
to get a message to stderr when the "foo" command fails, even if it does
not produce any output itself. This goes back to 8ad1652418 (t5304: use
helper to report failure of "test foo = bar", 2014-10-10). It does work,
but overall it has not been a big success for two reasons:
1. Test writers have to remember to put it there (and the resulting
test code is longer as a result).
2. It doesn't handle the opposite case (we expect "foo" to fail, but
it succeeds), leading to inconsistencies in tests (which you can
see in many hunks of this patch, e.g. ones involving "has_cr").
Most importantly, we added a136f6d8ff (test-lib.sh: support -x option
for shell-tracing, 2014-10-10) at the same time, and it does roughly the
same thing. The output is not quite as succinct as "verbose", and you
have to watch out for stray shell-traces ending up in stderr. But it
solves both of the problems above, and has clearly become the preferred
tool.
Let's consider the "verbose" function a failed experiment and remove the
last few callers (which are all many years old, and have been dwindling
as we remove them from scripts we touch for other reasons). It will be
one less thing for new test writers to see and wonder if they should be
using themselves.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 8 May 2023 19:01:46 +0000 (15:01 -0400)]
t7001: use "ls-files --format" instead of "cut"
Since ls-files recently learned a "--format" option, we can use that
rather than asking for all of "--stage" and then pulling out the bits we
want with "cut". That's simpler and avoids two extra processes (one for
cut, and one for the subshell to hold the intermediate result).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 8 May 2023 19:01:12 +0000 (15:01 -0400)]
t7001: avoid git on upstream of pipe
We generally avoid git on the left-hand side of a pipe, because it loses
the exit code of the command (and thus we'd miss things like segfaults
or unexpected failures). In the cases in t7001, we wouldn't expect
failures (they are just inspecting the repository state, and are not the
main point of the test), but it doesn't hurt to be careful.
In all but one case here we're piping "ls-files --stage" to cut off the
pathname (since we compare entries before and after moving). Let's pull
that into a helper function to avoid repeating the slightly awkward
replacement.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nico Rieck [Tue, 24 Jan 2023 11:23:17 +0000 (11:23 +0000)]
gitk: escape file paths before piping to git log
We just started piping the file paths via `stdin` instead of passing
them via the command-line, to avoid running into command-line
limitations.
However, since we now pipe the file paths, we need to take care of
special characters.
This fixes https://github.com/git-for-windows/git/issues/2293
Signed-off-by: Nico Rieck <nico.rieck@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid running into command line limitations, some of Git's commands
support the `--stdin` option.
Let's use exactly this option in the three rev-list/log invocations in
gitk that would otherwise possibly run the danger of trying to invoke a
too-long command line.
While it is easy to redirect either stdin or stdout in Tcl/Tk scripts,
what we need here is both. We need to capture the output, yet we also
need to pipe in the revs/files arguments via stdin (because stdin does
not have any limit, unlike the command line). To help this, we use the
neat Tcl feature where you can capture stdout and at the same time feed
a fixed string as stdin to the spawned process.
One non-obvious aspect about this change is that the `--stdin` option
allows to specify revs, the double-dash, and files, but *no* other
options such as `--not`. This is addressed by prefixing the "negative"
revs with `^` explicitly rather than relying on the `--not` option
(thanks for coming up with that idea, Max!).
This fixes https://github.com/git-for-windows/git/issues/1987
Analysis-and-initial-patch-by: Max Kirillov <max@max630.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teng Long [Sat, 6 May 2023 11:34:08 +0000 (19:34 +0800)]
push: introduce '--branches' option
The '--all' option of git-push built-in cmd support to push all branches
(refs under refs/heads) to remote. Under the usage, a user can easlily
work in some scenarios, for example, branches synchronization and batch
upload.
The '--all' was introduced for a long time, meanwhile, git supports to
customize the storage location under "refs/". when a new git user see
the usage like, 'git push origin --all', we might feel like we're
pushing _all_ the refs instead of just branches without looking at the
documents until we found the related description of it or '--mirror'.
To ensure compatibility, we cannot rename '--all' to another name
directly, one way is, we can try to add a new option '--heads' which be
identical with the functionality of '--all' to let the user understand
the meaning of representation more clearly. Actually, We've more or less
named options this way already, for example, in 'git-show-ref' and 'git
ls-remote'.
At the same time, we fix a related issue about the wrong help
information of '--all' option in code and add some test cases in
t5523, t5543 and t5583.
Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Cai [Sat, 6 May 2023 04:14:11 +0000 (04:14 +0000)]
name-rev: make --stdin hidden
In 34ae3b70 (name-rev: deprecate --stdin in favor of --annotate-stdin),
we renamed --stdin to --annotate-stdin for the sake of a clearer name
for the option, and added text that indicates --stdin is deprecated. The
next step is to hide --stdin completely.
Make the option hidden. Also, update documentation to remove all
mentions of --stdin.
Signed-off-by: "John Cai" <johncai86@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 6 May 2023 21:29:55 +0000 (14:29 -0700)]
t9800: correct misuse of 'show -s --raw' in a test
There is $(git show -s --raw --pretty=format:%at HEAD) in this test
that is meant to grab the author time of the commit. We used to
have a bug in the command line option parser of the diff family of
commands, where "show -s --raw" was identical to "show -s".
With the "-s" bug fixed, "show -s --raw" would mean the same thing
as "show --raw", i.e. show the output from the diff machinery in the
"raw" format. And this test will start failing, so fix it before
that happens.
Jeff King [Fri, 5 May 2023 21:16:10 +0000 (17:16 -0400)]
doc-diff: drop SOURCE_DATE_EPOCH override
The original doc-diff script set SOURCE_DATE_EPOCH to make asciidoc's
output deterministic. Otherwise, the mtime of the source files would end
up in the footer of the manpage, causing noisy and uninteresting diff
hunks.
But this has been unused since 28fde3a1f4 (doc: set actual revdate for
manpages, 2023-04-13), as the footer uses the externally-specified
GIT_DATE instead (that needs to be set consistently, too, which it now
is as of the previous commit).
Asciidoc sets several automatic attributes based on the mtime (or manual
epoch), so it's still possible to write a document that would need
SOURCE_DATE_EPOCH set to be deterministic. But if we wrote such a thing,
it's probably a mistake, and we're better off having doc-diff loudly
show it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 5 May 2023 21:19:17 +0000 (14:19 -0700)]
diff: plug leaks in dirstat
The array of dirstat_file contained in the dirstat_dir structure is
not freed after the processing ends. Unfortunately, the member that
points at the array, .files, is incremented as the gather_dirstat()
function recursively walks it, and this needs to be plugged by
remembering the beginning of the array before gather_dirstat() mucks
with it and freeing it after we are done.
We can mark t4047 as leak-free. t4000, which is marked as
leak-free, now can exercise dirstat in it, which will happen next.
Earlier we changed the manual page formatting machinery to use the
dates from the commit the documentation source was taken from,
instead of the date the manual page was produced. When "doc-diff"
compares two commits from different dates, the different dates from
the two commits would result in unnecessary differences in the
output because of the change.
Compensate by setting a fixed date when "doc-diff" formats the pages
to be compared to work around this issue.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
DocBook Stylesheets limit the size of the manpage titles for some
reason.
Even some of the longest git commands have no trouble fitting in 80
character terminals, so it's not clear why we would want to limit titles
to 20 characters, especially when modern terminals are much bigger.
Alex Henrie [Wed, 3 May 2023 04:46:56 +0000 (22:46 -0600)]
docs: rewrite the documentation of the text and eol attributes
These two sentences are confusing because the description of the text
attribute sounds exactly the same as the description of the text=auto
attribute:
"Setting the text attribute on a path enables end-of-line normalization"
"When text is set to "auto", the path is marked for automatic
end-of-line conversion"
Unless the reader is already familiar with the two variants, there's a
high probability that they will think that "end-of-line normalization"
is the same thing as "automatic end-of-line conversion".
It's also not clear that the phrase "When the file has been committed
with CRLF, no conversion is done" in the paragraph for text=auto does
not apply equally to the bare text attribute which is described earlier.
Moreover, it falsely implies that normalization is only suppressed if
the file has been committed. In fact, running `git add` on a CRLF file,
adding the text=auto attribute to the file, and running `git add` again
does not do anything to the line endings either.
On top of that, in several places the documentation for the eol
attribute sounds like either it does not affect normalization on checkin
or it forces normalization on checkin. It also sounds like setting eol
(or setting a config variable) is required to turn on conversion on
checkout, but the text attribute can turn on conversion on checkout by
itself if eol is unspecified.
Rephrase the documentation of text, text=auto, eol, eol=crlf, and eol=lf
to be clear about how they are the same, how they are different, and in
what cases conversion is performed.
Helped-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:44 +0000 (21:10 +0200)]
t2019: don't create unused files
Tests in t2019-checkout-ambiguous-ref.sh redirect two invocations of
"git checkout" to files "stdout" and "stderr". Several assertions are
made using file "stderr". File "stdout", however, is unused.
Don't redirect standard output of "git checkout" to file "stdout" in
t2019-checkout-ambiguous-ref.sh to avoid creating unnecessary files.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:43 +0000 (21:10 +0200)]
t1502: don't create unused files
Three tests in file t1502-rev-parse-parseopt.sh use three redirections
with invocation of "git rev-parse --parseopt --". All three tests
redirect standard output to file "out" and file "spec" to standard
input. Two of the tests redirect standard output a second time to file
"actual", and the third test redirects standard error to file "err".
These tests check contents of files "actual" and "err", but don't use
the files named "out" for assertions. The two tests that redirect to
standard output twice might also be confusing to the reader.
Don't redirect standard output of "git rev-parse" to file "out" in
t1502-rev-parse-parseopt.sh to avoid creating unnecessary files.
Acked-by: Øystein Walle <oystwa@gmail.com> Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:42 +0000 (21:10 +0200)]
t1450: don't create unused files
Test 'fsck error and recovery on invalid object type' in file
t1450-fsck.sh redirects output of a failing "git fsck" invocation to
files "out" and "err" to assert presence of error messages in the output
of the command. Commit 31deb28f5e (fsck: don't hard die on invalid
object types, 2021-10-01) changed the way assertions in this test are
performed. The test doesn't compare the whole standard error with
prepared file "err.expect" and it doesn't assert that standard output is
empty.
Don't create unused files "err.expect" and "out" in test 'fsck error and
recovery on invalid object type'.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:41 +0000 (21:10 +0200)]
t1300: don't create unused files
Three tests in t1300-config.sh check that "git config --get" barfs when
syntax errors are present in the config file. The tests redirect
standard output and standard error of "git config --get" to files,
"actual" and "error" correspondingly. They assert presence of an error
message in file "error". However, these tests don't use file "actual"
for assertions.
Don't redirect standard output of "git config --get" to file "actual" in
t1300-config.sh to avoid creating unnecessary files.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:40 +0000 (21:10 +0200)]
t1300: fix config file syntax error descriptions
Three tests in t1300-config.sh check that "git config --get" barfs when
the config file contains various syntax errors: key=value pair without
equals sign, broken section line, and broken value string. The sample
config files include a comment describing the kind of broken syntax.
This description seems to have been copy-pasted from the "broken section
line" sample to the other two samples.
Fix descriptions of broken config file syntax in samples used in
t1300-config.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei Rybak [Mon, 17 Apr 2023 19:10:39 +0000 (21:10 +0200)]
t0300: don't create unused file
Test 'credential config with partial URLs' in t0300-credentials.sh
contains three "git credential fill" invocations. For two of the
invocations, the test asserts presence or absence of string "yep" in the
standard output. For the third test it checks for an error message in
standard error.
Don't redirect standard output of "git credential" to file "stdout" in
t0300-credentials.sh to avoid creating an unnecessary file when only
standard error is checked.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Tue, 18 Apr 2023 01:18:28 +0000 (19:18 -0600)]
doc: remove custom callouts format
The code to render callouts for manpages comes from 17 years ago: 776e994af5 (Properly render asciidoc "callouts" in git man pages.,
2006-04-28), and it was needed back then, but DocBook Stylesheets added
support for that in 2008 [1], since 1.74.0 it hasn't been necessary.
What's worse: the format of the upstream callouts is much nicer than our
hacked version.
1. Changes in the working tree not yet staged for the next
commit.
2. Changes between the index and your last commit; what you
would be committing if you run git commit without -a
option.
3. Changes in the working tree since your last commit; what
you would be committing if you run git commit -a
1. Changes in the working tree not yet staged for the next commit.
2. Changes between the index and your last commit; what you would
be committing if you run git commit without -a option.
3. Changes in the working tree since your last commit; what you
would be committing if you run git commit -a
Let's drop our unnecessary inferior custom format and use the official
one.
[1] https://sourceforge.net/p/docbook/code/7842/
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 May 2023 17:13:35 +0000 (10:13 -0700)]
Merge branch 'tb/ban-strtok'
Mark strtok() and strtok_r() to be banned.
* tb/ban-strtok:
banned.h: mark `strtok()` and `strtok_r()` as banned
t/helper/test-json-writer.c: avoid using `strtok()`
t/helper/test-oidmap.c: avoid using `strtok()`
t/helper/test-hashmap.c: avoid using `strtok()`
string-list: introduce `string_list_setlen()`
string-list: multi-delimiter `string_list_split_in_place()`
Junio C Hamano [Tue, 2 May 2023 17:13:34 +0000 (10:13 -0700)]
Merge branch 'jk/blame-fake-commit-label'
The output given by "git blame" that attributes a line to contents
taken from the file specified by the "--contents" option shows it
differently from a line attributed to the working tree file.
* jk/blame-fake-commit-label:
blame: use different author name for fake commit generated by --contents
The completion script used to use bare "read" without the "-r"
option to read the contents of various state files, which risked
getting confused with backslashes in them. This has been
corrected.
* ek/completion-use-read-r-to-read-literally:
completion: suppress unwanted unescaping of `read`
René Scharfe [Mon, 1 May 2023 19:51:57 +0000 (21:51 +0200)]
test-ctype: check EOF
The character classifiers are supposed to allow passing EOF to them, a
negative value. It isn't part of any character class. Extend the tests
to cover that.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 May 2023 13:27:22 +0000 (13:27 +0000)]
fsck: use local repository
In 0d30feef3c5 (fsck: create scaffolding for rev-index checks,
2023-04-17) and later 5a6072f631d (fsck: validate .rev file header,
2023-04-17), the check_pack_rev_indexes() method was created with a
'struct repository *r' parameter. However, this parameter was unused and
instead 'the_repository' was used in its place.
Fix this situation with the obvious replacement.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Tue, 2 May 2023 13:27:21 +0000 (13:27 +0000)]
fsck: verify checksums of all .bitmap files
If a filesystem-level corruption occurs in a .bitmap file, Git can react
poorly. This could take the form of a run-time error due to failing to
parse an EWAH bitmap or be more subtle such as returning the wrong set
of objects to a fetch or clone.
A natural first response to either of these kinds of errors is to run
'git fsck' to see if any files are corrupt. This currently ignores all
.bitmap files.
Add checks to 'git fsck' for all .bitmap files that are currently
associated with a multi-pack-index or pack file. Verify their checksums
using the hashfile API.
We iterate through all multi-pack-indexes and pack-files to be sure to
check all .bitmap files, not just the one that would be read by the
process. For example, a multi-pack-index bitmap overrules a pack-bitmap.
However, if the multi-pack-index is removed, the pack-bitmap may be
selected instead. Be thorough to include every file that could become
active in such a way. This includes checking files in alternates.
There is potential that we could extend this effort to check the
structure of the reachability bitmaps themselves, but it is very
expensive to do so. At minimum, it's as expensive as generating the
bitmaps in the first place, and that's assuming that we don't use the
trivial algorithm of verifying each bitmap individually. The trivial
algorithm will result in quadratic behavior (number of objects times
number of bitmapped commits) while the bitmap building operation
constructs a lattice of commits to build bitmaps incrementally and then
generate the final bitmaps from a subset of those commits.
If we were to extend 'git fsck' to check .bitmap file contents more
closely like this, then we would likely want to hide it behind an option
that signals the user is more willing to do expensive operations such as
this.
For testing, set up a repository with a pack-bitmap _and_ a
multi-pack-index bitmap. This requires some file movement to avoid
deleting the pack-bitmap during the repack that creates the
multi-pack-index bitmap. We can then verify that 'git fsck' is checking
all files, not just the "active" bitmap.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to provide `--trailer sign` since the command won’t output
anything if you don’t give it an input and/or a
`--trailer`. Furthermore, the message which already contains an s-o-b is
wrong:
$ git interpret-trailers --trailer sign <msg.txt Signed-off-by: Alice <alice@example.com> Signed-off-by: Alice <alice@example.com>
This can’t be what was originally intended.
So change the messages in this example to use the typical
“subject/message” file.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: interpret-trailers: don’t use deprecated config
`command` has been deprecated since commit c364b7ef51 (trailer: add new
.cmd config option, 2021-05-03).
Use the commit message of c364b7ef51 as a guide to replace the use of
`$ARG` and to use a script instead of an inline command.[1] Also,
explicitly trigger the command by passing in `--trailer=see`, since
this config is not automatically used.[2]
[1]: “Instead of "$ARG", users can refer to the value as positional
argument, $1, in their scripts.”
[2]: “At the same time, in order to allow `git interpret-trailers` to
better simulate the behavior of `git command -s`,
'trailer.<token>.cmd' will not automatically execute.”
Acked-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use input redirection instead of invoking cat(1) on a single file. This
is more straightforward, saves a process, and often makes the line
shorter.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
