ui/win32: fix potential use-after-free with dbus shared memory
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
(cherry picked from commit 330ef31deb2e5461cff907488b710f5bd9cd2327) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/intc/arm_gicv3_cpuif: Add cast to match the documentation
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs") Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3db74afec3ca87f81fbdf5918ed1e21d837fbfab) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/m68k: Always return a temporary from gen_lea_mode
Returning a raw areg does not preserve the value if the areg
is subsequently modified. Fixes, e.g. "jsr (sp)", where the
return address is pushed before the branch.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2483 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240813000737.228470-1-richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 352cc9f300d83ea48b8154bfd2ff985fece887d0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tcg/ppc: Use TCG_REG_TMP2 for scratch index in prepare_host_addr
In tcg_out_qemu_ldst_i128, we need a non-zero index register,
which we then use as a base register in several address modes.
Since we always have TCG_REG_TMP2 available, use that.
Cc: qemu-stable@nongnu.org Fixes: 526cd4ec01f ("tcg/ppc: Support 128-bit load/store")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2597 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-By: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 3213da7b9539581c6df95f8ced5b09d0b02d425f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Comparing a string of 4 bytes only works in little-endian.
Adjust bulk bswap to only apply to the note payload.
Perform swapping of the note header manually; the magic
is defined so that it does not need a runtime swap.
Fixes: 83f990eb5adb ("linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2596 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2884596f5f385b5712c356310dd4125a089888a8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: fbd3c4cff6 ("linux-user/arm: Mark the commpage executable")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2525 Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240822095045.72643-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit a9ee641bd46f5462eeed183ac3c3760bddfc2600) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Wed, 2 Oct 2024 08:03:33 +0000 (10:03 +0200)]
testing: bump mips64el cross to bookworm and fix package list
The mips64el cross setup is very broken for bullseye which has now
entered LTS support so is unlikely to be fixed. While we still can't
build the container with all packages for bookworm due to a single
missing dependency that will hopefully get fixed in due course. For
the sake of keeping the CI green we disable the problematic packages
via the lcitool's mappings.yml file.
See also: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1081535
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Disable the problematic packages via lcitool's mappings.yml]
Message-ID: <20241002080333.127172-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c60473d29254b79d9437eface8b342e84663ba66) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in tests/docker/dockerfiles/debian-mips64el-cross.docker)
When we are building for OSS-Fuzz, we want to ensure that the fuzzer
targets are actually created, regardless of leaks. Leaks will be
detected by the subsequent tests of the individual fuzz-targets.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240527150001.325565-1-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 3e964275d65b92075249201c49b39dfb06d08ad4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Avoid target_ulong for physical address lookups
target_ulong is typedef'ed as a 32-bit integer when building the
qemu-system-arm target, and this is smaller than the size of an
intermediate physical address when LPAE is being used.
Given that Linux may place leaf level user page tables in high memory
when built for LPAE, the kernel will crash with an external abort as
soon as it enters user space when running with more than ~3 GiB of
system RAM.
So replace target_ulong with vaddr in places where it may carry an
address value that is not representable in 32 bits.
Fixes: f3639a64f602ea ("target/arm: Use softmmu tlbs for page table walking") Cc: qemu-stable@nongnu.org Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240927071051.1444768-1-ardb+git@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 67d762e716a7127ecc114e9708254316dd521911) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Allow overlapping request by removing the assert that made it
impossible. There are only two callers:
1. block_copy_task_create()
It already asserts the very same condition before calling
reqlist_init_req().
2. cbw_snapshot_read_lock()
There is no need to have read requests be non-overlapping in
copy-before-write when used for snapshot-access. In fact, there was no
protection against two callers of cbw_snapshot_read_lock() calling
reqlist_init_req() with overlapping ranges and this could lead to an
assertion failure [1].
In particular, with the reproducer script below [0], two
cbw_co_snapshot_block_status() callers could race, with the second
calling reqlist_init_req() before the first one finishes and removes
its conflicting request.
> #5 0x000071e5f0088eb2 in __GI___assert_fail (...) at ./assert/assert.c:101
> #6 0x0000615285438017 in reqlist_init_req (...) at ../block/reqlist.c:23
> #7 0x00006152853e2d98 in cbw_snapshot_read_lock (...) at ../block/copy-before-write.c:237
> #8 0x00006152853e3068 in cbw_co_snapshot_block_status (...) at ../block/copy-before-write.c:304
> #9 0x00006152853f4d22 in bdrv_co_snapshot_block_status (...) at ../block/io.c:3726
> #10 0x000061528543a63e in snapshot_access_co_block_status (...) at ../block/snapshot-access.c:48
> #11 0x00006152853f1a0a in bdrv_co_do_block_status (...) at ../block/io.c:2474
> #12 0x00006152853f2016 in bdrv_co_common_block_status_above (...) at ../block/io.c:2652
> #13 0x00006152853f22cf in bdrv_co_block_status_above (...) at ../block/io.c:2732
> #14 0x00006152853d9a86 in blk_co_block_status_above (...) at ../block/block-backend.c:1473
> #15 0x000061528538da6c in blockstatus_to_extents (...) at ../nbd/server.c:2374
> #16 0x000061528538deb1 in nbd_co_send_block_status (...) at ../nbd/server.c:2481
> #17 0x000061528538f424 in nbd_handle_request (...) at ../nbd/server.c:2978
> #18 0x000061528538f906 in nbd_trip (...) at ../nbd/server.c:3121
> #19 0x00006152855a7caf in coroutine_trampoline (...) at ../util/coroutine-ucontext.c:175
Cc: qemu-stable@nongnu.org Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240712140716.517911-1-f.ebner@proxmox.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
(cherry picked from commit 6475155d519209c80fdda53e05130365aa769838) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The loop in the 32-bit case of the vector compare operation
was incorrectly incrementing by 8 bytes per iteration instead
of 4 bytes. This caused the function to process only half of
the intended elements.
Cc: qemu-stable@nongnu.org Fixes: 9622c697d1 (tcg: Add gvec compare with immediate and scalar operand) Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com> Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240904142739.854-2-zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 9d8d5a5b9078a16b4c0862fe54248c5cc8435648) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 17 Sep 2024 16:13:37 +0000 (17:13 +0100)]
target/arm: Correct ID_AA64ISAR1_EL1 value for neoverse-v1
The Neoverse-V1 TRM is a bit confused about the layout of the
ID_AA64ISAR1_EL1 register, and so its table 3-6 has the wrong value
for this ID register. Trust instead section 3.2.74's list of which
fields are set.
This means that we stop incorrectly reporting FEAT_XS as present, and
now report the presence of FEAT_BF16.
Cc: qemu-stable@nongnu.org Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240917161337.3012188-1-peter.maydell@linaro.org
(cherry picked from commit 8676007eff04bb4e454bcdf92fab3f855bcc59b3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
softmmu/physmem.c: Keep transaction attribute in address_space_map()
The follow-up transactions may use the data in the attribution, so keep
the value of attribution from the function parameter just as
flatview_translate() above.
gitlab: stable staging branches publish containers in a separate tag
Due to a copy+paste mistake, that commit included "QEMU_JOB_SKIPPED"
in the final rule that was meant to be a 'catch all' for staging
branches.
As a result stable branches are still splattering dockers from the
primary development branch.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20240906140958.84755-1-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8d5ab746b1e6668ffb0378820b25665b385c8573) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Gert Wollny [Wed, 11 Sep 2024 09:14:30 +0000 (09:14 +0000)]
ui/sdl2: set swap interval explicitly when OpenGL is enabled
Before 176e3783f2ab (ui/sdl2: OpenGL window context)
SDL_CreateRenderer was called unconditionally setting
the swap interval to 0. Since SDL_CreateRenderer is now no
longer called when OpenGL is enabled, the swap interval is
no longer set explicitly and vsync handling depends on
the environment settings which may lead to a performance
regression with virgl as reported in
https://gitlab.com/qemu-project/qemu/-/issues/2565
Restore the old vsync handling by explicitly calling
SDL_GL_SetSwapInterval if OpenGL is enabled.
Fixes: 176e3783f2ab (ui/sdl2: OpenGL window context) Closes: https://gitlab.com/qemu-project/qemu/-/issues/2565 Signed-off-by: Gert Wollny <gert.wollny@collabora.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <01020191e05ce6df-84da6386-62c2-4ce8-840e-ad216ac253dd-000000@eu-west-1.amazonses.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit ae23cd00170baaa2777eb1ee87b70f472dbb3c44) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On GICv2 and later, level triggered interrupts are pending when either
the interrupt line is asserted or the interrupt was made pending by a
GICD_ISPENDRn write. Making a level triggered interrupt pending by
software persists until either the interrupt is acknowledged or cleared
by writing GICD_ICPENDRn. As long as the interrupt line is asserted,
the interrupt is pending in any case.
This logic is transparently implemented in gic_test_pending() for
GICv1 and GICv2. The function combines the "pending" irq_state flag
(used for edge triggered interrupts and software requests) and the
line status (tracked in the "level" field). However, we also
incorrectly set the pending flag on a guest write to GICD_ISENABLERn
if the line of a level triggered interrupt was asserted. This keeps
the interrupt pending even if the line is de-asserted after some
time.
This incorrect logic is a leftover of the initial 11MPCore GIC
implementation. That handles things slightly differently to the
architected GICv1 and GICv2. The 11MPCore TRM does not give a lot of
detail on the corner cases of its GIC's behaviour, and historically
we have not wanted to investigate exactly what it does in reality, so
QEMU's GIC model takes the approach of "retain our existing behaviour
for 11MPCore, and implement the architectural standard for later GIC
revisions".
On that basis, commit 8d999995e45c10 in 2013 is where we added the
"level-triggered interrupt with the line asserted" handling to
gic_test_pending(), and we deliberately kept the old behaviour of
gic_test_pending() for REV_11MPCORE. That commit should have added
the "only if 11MPCore" condition to the setting of the pending bit on
writes to GICD_ISENABLERn, but forgot it.
Add the missing "if REV_11MPCORE" condition, so that our behaviour
on GICv1 and GICv2 matches the GIC architecture requirements.
Cc: qemu-stable@nongnu.org Fixes: 8d999995e45c10 ("arm_gic: Fix GIC pending behavior") Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Message-id: 20240911114826.3558302-1-jan.kloetzke@kernkonzept.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expanded comment a little and converted to coding-style form;
expanded commit message with the historical backstory] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 110684c9a69a02cbabfbddcd3afa921826ad565c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, the guest may write to the device configuration space,
whereas the virtio sound device specification in chapter 5.14.4
clearly states that the fields in the device configuration space
are driver-read-only.
Remove the set_config function from the virtio_snd class.
This also prevents a heap buffer overflow. See QEMU issue #2296.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2296 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240901130112.8242-1-vr_qemu@t-online.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7fc6611cad3e9627b23ce83e550b668abba6c886) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 10 Sep 2024 17:38:52 +0000 (18:38 +0100)]
tests/docker: update debian i686 and mipsel images to bookworm
Whatever issues there were which stopped these being updates when the
rest were have now been resolved. However mips64el continues to be
broken so don't update it here.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-3-alex.bennee@linaro.org>
(cherry picked from commit 19d2111059c87d3f58349f27b9be9dee81fc1681) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 10 Sep 2024 17:38:51 +0000 (18:38 +0100)]
tests/docker: remove debian-armel-cross
As debian-11 transitions to LTS we are starting to have problems
building the image. While we could update to a later Debian building a
32 bit QEMU without modern floating point is niche host amongst the
few remaining 32 bit hosts we regularly build for. For now we still
have armhf-debian-cross-container which is currently built from the
more recent debian-12.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-2-alex.bennee@linaro.org>
(cherry picked from commit d0068b746a0a8cd4bb148527a0d199b130cd5288) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: force-remove tests/docker/dockerfiles/debian-armel-cross.docker)
crypto: check gnutls & gcrypt support the requested pbkdf hash
Both gnutls and gcrypt can be configured to exclude support for certain
algorithms via a runtime check against system crypto policies. Thus it
is not sufficient to have a compile time test for hash support in their
pbkdf implementations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit e6c09ea4f9e5f8af92a6453642b84b9efd52892f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: run qcrypto_pbkdf2_count_iters in a new thread
CPU time accounting in the kernel has been demonstrated to have a
sawtooth pattern[1][2]. This can cause the getrusage system call to
not be as accurate as we are expecting, which can cause this calculation
to stall.
The kernel discussions shows that this inaccuracy happens when CPU time
gets big enough, so this patch changes qcrypto_pbkdf2_count_iters to run
in a fresh thread to avoid this inaccuracy. It also adds a sanity check
to fail the process if CPU time is not accounted.
Resolves: #2398 Signed-off-by: Tiago Pasqualini <tiago.pasqualini@canonical.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit c72cab5ad9f849bbcfcf4be7952b8b8946cc626e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
softmmu/physmem: fix memory leak in dirty_memory_extend()
As reported by Peter, we might be leaking memory when removing the
highest RAMBlock (in the weird ram_addr_t space), and adding a new one.
We will fail to realize that we already allocated bitmaps for more
dirty memory blocks, and effectively discard the pointers to them.
Fix it by getting rid of last_ram_page() and by remembering the number
of dirty memory blocks that have been allocated already.
While at it, let's use "unsigned int" for the number of blocks, which
should be sufficient until we reach ~32 exabytes.
Looks like this leak was introduced as we switched from using a single
bitmap_zero_extend() to allocating multiple bitmaps:
bitmap_zero_extend() relies on g_renew() which should have taken care of
this.
Resolves: https://lkml.kernel.org/r/CAFEAcA-k7a+VObGAfCFNygQNfCKL=AfX6A4kScq=VSSK0peqPg@mail.gmail.com Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 5b82b703b69a ("memory: RCU ram_list.dirty_memory[] for safe RAM hotplug") Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20240828090743.128647-1-david@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit b84f06c2bee727b3870b4eeccbe3a45c5aea14c1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of v9.0.0-rc4-49-g15f7a80c49cb "RAMBlock: Add support of KVM private guest memfd")
Arman Nabiev [Thu, 22 Aug 2024 16:56:53 +0000 (19:56 +0300)]
target/ppc: Fix migration of CPUs with TLB_EMB TLB type
In vmstate_tlbemb a cut-and-paste error meant we gave
this vmstate subsection the same "cpu/tlb6xx" name as
the vmstate_tlb6xx subsection. This breaks migration load
for any CPU using the TLB_EMB CPU type, because when we
see the "tlb6xx" name in the incoming data we try to
interpret it as a vmstate_tlb6xx subsection, which it
isn't the right format for:
$ qemu-system-ppc -drive
if=none,format=qcow2,file=/home/petmay01/test-images/virt/dummy.qcow2
-monitor stdio -M bamboo
QEMU 9.0.92 monitor - type 'help' for more information
(qemu) savevm foo
(qemu) loadvm foo
Missing section footer for cpu
Error: Error -22 while loading VM state
Correct the incorrect vmstate section name. Since migration
for these CPU types was completely broken before, we don't
need to care that this is a migration compatibility break.
This affects the PPC 405, 440, 460 and e200 CPU families.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2522 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Arman Nabiev <nabiev.arman13@gmail.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 203beb6f047467a4abfc8267c234393cea3f471c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Fri, 26 Apr 2024 15:39:37 +0000 (16:39 +0100)]
gitlab: migrate the s390x custom machine to 22.04
20.04 is dead (from QEMU's point of view), long live 22.04!
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-3-alex.bennee@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 108d99742af1fa6e977dcfac9d4151b7915e33a3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/hppa: Fix PSW V-bit packaging in cpu_hppa_get for hppa64
While adding hppa64 support, the psw_v variable got extended from 32 to 64
bits. So, when packaging the PSW-V bit from the psw_v variable for interrupt
processing, check bit 31 instead the 63th (sign) bit.
This fixes a hard to find Linux kernel boot issue where the loss of the PSW-V
bit due to an ITLB interruption in the middle of a series of ds/addc
instructions (from the divU milicode library) generated the wrong division
result and thus triggered a Linux kernel crash.
Link: https://lore.kernel.org/lkml/718b8afe-222f-4b3a-96d3-93af0e4ceff1@roeck-us.net/ Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 931adff31478 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64") Cc: qemu-stable@nongnu.org # v8.2+
(cherry picked from commit ead5078cf1a5f11d16e3e8462154c859620bcc7e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in target/hppa/helper.c due to lack of v9.0.0-688-gebc9401a4067 "target/hppa: Split PSW X and B into their own field")
Volker Rümelin [Fri, 2 Aug 2024 07:18:05 +0000 (09:18 +0200)]
hw/audio/virtio-snd: fix invalid param check
Commit 9b6083465f ("virtio-snd: check for invalid param shift
operands") tries to prevent invalid parameters specified by the
guest. However, the code is not correct.
Change the code so that the parameters format and rate, which are
a bit numbers, are compared with the bit size of the data type.
Fixes: 9b6083465f ("virtio-snd: check for invalid param shift operands") Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240802071805.7123-1-vr_qemu@t-online.de> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7d14471a121878602cb4e748c4707f9ab9a9e3e2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cindy Lu [Tue, 6 Aug 2024 09:37:12 +0000 (17:37 +0800)]
virtio-pci: Fix the use of an uninitialized irqfd
The crash was reported in MAC OS and NixOS, here is the link for this bug
https://gitlab.com/qemu-project/qemu/-/issues/2334
https://gitlab.com/qemu-project/qemu/-/issues/2321
In this bug, they are using the virtio_input device. The guest notifier was
not supported for this device, The function virtio_pci_set_guest_notifiers()
was not called, and the vector_irqfd was not initialized.
So the fix is adding the check for vector_irqfd in virtio_pci_get_notifier()
The function virtio_pci_get_notifier() can be used in various devices.
It could also be called when VIRTIO_CONFIG_S_DRIVER_OK is not set. In this situation,
the vector_irqfd being NULL is acceptable. We can allow the device continue to boot
If the vector_irqfd still hasn't been initialized after VIRTIO_CONFIG_S_DRIVER_OK
is set, it means that the function set_guest_notifiers was not called before the
driver started. This indicates that the device is not using the notifier.
At this point, we will let the check fail.
This fix is verified in vyatta,MacOS,NixOS,fedora system.
The bt tree for this bug is:
Thread 6 "CPU 0/KVM" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7c817be006c0 (LWP 1269146)]
kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
817 if (irqfd->users == 0) {
(gdb) thread apply all bt
...
Thread 6 (Thread 0x7c817be006c0 (LWP 1269146) "CPU 0/KVM"):
0 kvm_virtio_pci_vq_vector_use () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:817
1 kvm_virtio_pci_vector_use_one () at ../qemu-9.0.0/hw/virtio/virtio-pci.c:893
2 0x00005983657045e2 in memory_region_write_accessor () at ../qemu-9.0.0/system/memory.c:497
3 0x0000598365704ba6 in access_with_adjusted_size () at ../qemu-9.0.0/system/memory.c:573
4 0x0000598365705059 in memory_region_dispatch_write () at ../qemu-9.0.0/system/memory.c:1528
5 0x00005983659b8e1f in flatview_write_continue_step.isra.0 () at ../qemu-9.0.0/system/physmem.c:2713
6 0x000059836570ba7d in flatview_write_continue () at ../qemu-9.0.0/system/physmem.c:2743
7 flatview_write () at ../qemu-9.0.0/system/physmem.c:2774
8 0x000059836570bb76 in address_space_write () at ../qemu-9.0.0/system/physmem.c:2894
9 0x0000598365763afe in address_space_rw () at ../qemu-9.0.0/system/physmem.c:2904
10 kvm_cpu_exec () at ../qemu-9.0.0/accel/kvm/kvm-all.c:2917
11 0x000059836576656e in kvm_vcpu_thread_fn () at ../qemu-9.0.0/accel/kvm/kvm-accel-ops.c:50
12 0x0000598365926ca8 in qemu_thread_start () at ../qemu-9.0.0/util/qemu-thread-posix.c:541
13 0x00007c8185bcd1cf in ??? () at /usr/lib/libc.so.6
14 0x00007c8185c4e504 in clone () at /usr/lib/libc.so.6
Fixes: 2ce6cff94d ("virtio-pci: fix use of a released vector") Cc: qemu-stable@nongnu.org Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240806093715.65105-1-lulu@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a8e63ff289d137197ad7a701a587cc432872d798) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Klaus Jensen [Tue, 20 Aug 2024 04:16:48 +0000 (06:16 +0200)]
hw/nvme: fix leak of uninitialized memory in io_mgmt_recv
Yutaro Shimizu from the Cyber Defense Institute discovered a bug in the
NVMe emulation that leaks contents of an uninitialized heap buffer if
subsystem and FDP emulation are enabled.
Cc: qemu-stable@nongnu.org Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 6a22121c4f25b181e99479f65958ecde65da1c92) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 19 Aug 2024 14:50:21 +0000 (15:50 +0100)]
crypto/tlscredspsk: Free username on finalize
When the creds->username property is set we allocate memory
for it in qcrypto_tls_creds_psk_prop_set_username(), but
we never free this when the QCryptoTLSCredsPSK is destroyed.
Free the memory in finalize.
This fixes a LeakSanitizer complaint in migration-test:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x5624e5c99dee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218edee) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
#1 0x7fb199ae9738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fb199afe583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x5624e82ea919 in qcrypto_tls_creds_psk_prop_set_username /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../crypto/tlscredspsk.c:255:23
#4 0x5624e812c6b5 in property_set_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:2277:5
#5 0x5624e8125ce5 in object_property_set /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:1463:5
#6 0x5624e8136e7c in object_set_properties_from_qdict /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:55:14
#7 0x5624e81372d2 in user_creatable_add_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:112:5
#8 0x5624e8137964 in user_creatable_add_qapi /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:157:11
#9 0x5624e891ba3c in qmp_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/qom-qmp-cmds.c:227:5
#10 0x5624e8af9118 in qmp_marshal_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-commands-qom.c:337:5
#11 0x5624e8bd1d49 in do_qmp_dispatch_bh /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qapi/qmp-dispatch.c:128:5
#12 0x5624e8cb2531 in aio_bh_call /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:171:5
#13 0x5624e8cb340c in aio_bh_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:218:13
#14 0x5624e8c0be98 in aio_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/aio-posix.c:423:5
#15 0x5624e8cba3ce in aio_ctx_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:360:5
#16 0x7fb199ae0d3a in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#17 0x7fb199ae0d3a in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#18 0x5624e8cbe1d9 in glib_pollfds_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:287:9
#19 0x5624e8cbcb13 in os_host_main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:310:5
#20 0x5624e8cbc6dc in main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:589:11
#21 0x5624e6f3f917 in qemu_main_loop /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/runstate.c:801:9
#22 0x5624e893379c in qemu_default_main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:37:14
#23 0x5624e89337e7 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:48:12
#24 0x7fb197972d8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#25 0x7fb197972e3f in __libc_start_main csu/../csu/libc-start.c:392:3
#26 0x5624e5c16fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
SUMMARY: AddressSanitizer: 5 byte(s) leaked in 1 allocation(s).
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240819145021.38524-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 87e012f29f2e47dcd8c385ff8bb8188f9e06d4ea) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alyssa Ross [Mon, 5 Aug 2024 10:49:21 +0000 (12:49 +0200)]
target/hexagon: don't look for static glib
When cross compiling QEMU configured with --static, I've been getting
configure errors like the following:
Build-time dependency glib-2.0 found: NO
../target/hexagon/meson.build:303:15: ERROR: Dependency lookup for glib-2.0 with method 'pkgconfig' failed: Could not generate libs for glib-2.0:
Package libpcre2-8 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libpcre2-8.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libpcre2-8', required by 'glib-2.0', not found
This happens because --static sets the prefer_static Meson option, but
my build machine doesn't have a static libpcre2. I don't think it
makes sense to insist that native dependencies are static, just
because I want the non-native QEMU binaries to be static.
module: Prevent crash by resetting local_err in module_load_qom_all()
Set local_err to NULL after it has been freed in error_report_err(). This
avoids triggering assert(*errp == NULL) failure in error_setv() when
local_err is reused in the loop.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com> Reviewed-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Denis V. Lunev <den@openvz.org> Link: https://lore.kernel.org/r/20240809121340.992049-2-alexander.ivanov@virtuozzo.com
[Do the same by moving the declaration instead. - Paolo] Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 940d802b24e63650e0eacad3714e2ce171cba17c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Clear high SVE elements in handle_vec_simd_wshli
AdvSIMD instructions are supposed to zero bits beyond 128.
Affects SSHLL, USHLL, SSHLL2, USHLL2.
Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240717060903.205098-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 8e0c9a9efa21a16190cbac288e414bbf1d80f639) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
block/blkio: use FUA flag on write zeroes only if supported
libblkio supports BLKIO_REQ_FUA with write zeros requests only since
version 1.4.0, so let's inform the block layer that the blkio driver
supports it only in this case. Otherwise we can have runtime errors
as reported in https://issues.redhat.com/browse/RHEL-32878
Fixes: fd66dbd424 ("blkio: add libblkio block driver") Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-32878 Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240808080545.40744-1-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 547c4e50929ec6c091d9c16a7b280e829b12b463) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jianzhou Yue [Fri, 9 Aug 2024 16:37:56 +0000 (17:37 +0100)]
hw/core/ptimer: fix timer zero period condition for freq > 1GHz
The real period is zero when both period and period_frac are zero.
Check the method ptimer_set_freq, if freq is larger than 1000 MHz,
the period is zero, but the period_frac is not, in this case, the
ptimer will work but the current code incorrectly recognizes that
the ptimer is disabled.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2306 Signed-off-by: JianZhou Yue <JianZhou.Yue@verisilicon.com>
Message-id: 3DA024AEA8B57545AF1B3CAA37077D0FB75E82C8@SHASXM03.verisilicon.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 446e5e8b4515e9a7be69ef6a29852975289bb6f0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eric Blake [Thu, 22 Aug 2024 14:35:29 +0000 (09:35 -0500)]
nbd/server: CVE-2024-7409: Avoid use-after-free when closing server
Commit 3e7ef738 plugged the use-after-free of the global nbd_server
object, but overlooked a use-after-free of nbd_server->listener.
Although this race is harder to hit, notice that our shutdown path
first drops the reference count of nbd_server->listener, then triggers
actions that can result in a pending client reaching the
nbd_blockdev_client_closed() callback, which in turn calls
qio_net_listener_set_client_func on a potentially stale object.
If we know we don't want any more clients to connect, and have already
told the listener socket to shut down, then we should not be trying to
update the listener socket's associated function.
Eric Blake [Wed, 7 Aug 2024 17:23:13 +0000 (12:23 -0500)]
nbd/server: CVE-2024-7409: Close stray clients at server-stop
A malicious client can attempt to connect to an NBD server, and then
intentionally delay progress in the handshake, including if it does
not know the TLS secrets. Although the previous two patches reduce
this behavior by capping the default max-connections parameter and
killing slow clients, they did not eliminate the possibility of a
client waiting to close the socket until after the QMP nbd-server-stop
command is executed, at which point qemu would SEGV when trying to
dereference the NULL nbd_server global which is no longer present.
This amounts to a denial of service attack. Worse, if another NBD
server is started before the malicious client disconnects, I cannot
rule out additional adverse effects when the old client interferes
with the connection count of the new server (although the most likely
is a crash due to an assertion failure when checking
nbd_server->connections > 0).
For environments without this patch, the CVE can be mitigated by
ensuring (such as via a firewall) that only trusted clients can
connect to an NBD server. Note that using frameworks like libvirt
that ensure that TLS is used and that nbd-server-stop is not executed
while any trusted clients are still connected will only help if there
is also no possibility for an untrusted client to open a connection
but then stall on the NBD handshake.
Given the previous patches, it would be possible to guarantee that no
clients remain connected by having nbd-server-stop sleep for longer
than the default handshake deadline before finally freeing the global
nbd_server object, but that could make QMP non-responsive for a long
time. So intead, this patch fixes the problem by tracking all client
sockets opened while the server is running, and forcefully closing any
such sockets remaining without a completed handshake at the time of
nbd-server-stop, then waiting until the coroutines servicing those
sockets notice the state change. nbd-server-stop now has a second
AIO_WAIT_WHILE_UNLOCKED (the first is indirectly through the
blk_exp_close_all_type() that disconnects all clients that completed
handshakes), but forced socket shutdown is enough to progress the
coroutines and quickly tear down all clients before the server is
freed, thus finally fixing the CVE.
This patch relies heavily on the fact that nbd/server.c guarantees
that it only calls nbd_blockdev_client_closed() from the main loop
(see the assertion in nbd_client_put() and the hoops used in
nbd_client_put_nonzero() to achieve that); if we did not have that
guarantee, we would also need a mutex protecting our accesses of the
list of connections to survive re-entrancy from independent iothreads.
Although I did not actually try to test old builds, it looks like this
problem has existed since at least commit 862172f45c (v2.12.0, 2017) -
even back when that patch started using a QIONetListener to handle
listening on multiple sockets, nbd_server_free() was already unaware
that the nbd_blockdev_client_closed callback can be reached later by a
client thread that has not completed handshakes (and therefore the
client's socket never got added to the list closed in
nbd_export_close_all), despite that patch intentionally tearing down
the QIONetListener to prevent new clients.
Reported-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com> Fixes: CVE-2024-7409 CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-14-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 3e7ef738c8462c45043a1d39f702a0990406a3b3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eric Blake [Thu, 8 Aug 2024 21:05:08 +0000 (16:05 -0500)]
nbd/server: CVE-2024-7409: Drop non-negotiating clients
A client that opens a socket but does not negotiate is merely hogging
qemu's resources (an open fd and a small amount of memory); and a
malicious client that can access the port where NBD is listening can
attempt a denial of service attack by intentionally opening and
abandoning lots of unfinished connections. The previous patch put a
default bound on the number of such ongoing connections, but once that
limit is hit, no more clients can connect (including legitimate ones).
The solution is to insist that clients complete handshake within a
reasonable time limit, defaulting to 10 seconds. A client that has
not successfully completed NBD_OPT_GO by then (including the case of
where the client didn't know TLS credentials to even reach the point
of NBD_OPT_GO) is wasting our time and does not deserve to stay
connected. Later patches will allow fine-tuning the limit away from
the default value (including disabling it for doing integration
testing of the handshake process itself).
Note that this patch in isolation actually makes it more likely to see
qemu SEGV after nbd-server-stop, as any client socket still connected
when the server shuts down will now be closed after 10 seconds rather
than at the client's whims. That will be addressed in the next patch.
For a demo of this patch in action:
$ qemu-nbd -f raw -r -t -e 10 file &
$ nbdsh --opt-mode -c '
H = list()
for i in range(20):
print(i)
H.insert(i, nbd.NBD())
H[i].set_opt_mode(True)
H[i].connect_uri("nbd://localhost")
'
$ kill $!
where later connections get to start progressing once earlier ones are
forcefully dropped for taking too long, rather than hanging.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-13-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: rebase to changes earlier in series, reduce scope of timer] Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit b9b72cb3ce15b693148bd09cef7e50110566d8a0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eric Blake [Tue, 6 Aug 2024 18:53:00 +0000 (13:53 -0500)]
nbd/server: CVE-2024-7409: Cap default max-connections to 100
Allowing an unlimited number of clients to any web service is a recipe
for a rudimentary denial of service attack: the client merely needs to
open lots of sockets without closing them, until qemu no longer has
any more fds available to allocate.
For qemu-nbd, we default to allowing only 1 connection unless more are
explicitly asked for (-e or --shared); this was historically picked as
a nice default (without an explicit -t, a non-persistent qemu-nbd goes
away after a client disconnects, without needing any additional
follow-up commands), and we are not going to change that interface now
(besides, someday we want to point people towards qemu-storage-daemon
instead of qemu-nbd).
But for qemu proper, and the newer qemu-storage-daemon, the QMP
nbd-server-start command has historically had a default of unlimited
number of connections, in part because unlike qemu-nbd it is
inherently persistent until nbd-server-stop. Allowing multiple client
sockets is particularly useful for clients that can take advantage of
MULTI_CONN (creating parallel sockets to increase throughput),
although known clients that do so (such as libnbd's nbdcopy) typically
use only 8 or 16 connections (the benefits of scaling diminish once
more sockets are competing for kernel attention). Picking a number
large enough for typical use cases, but not unlimited, makes it
slightly harder for a malicious client to perform a denial of service
merely by opening lots of connections withot progressing through the
handshake.
This change does not eliminate CVE-2024-7409 on its own, but reduces
the chance for fd exhaustion or unlimited memory usage as an attack
surface. On the other hand, by itself, it makes it more obvious that
with a finite limit, we have the problem of an unauthenticated client
holding 100 fds opened as a way to block out a legitimate client from
being able to connect; thus, later patches will further add timeouts
to reject clients that are not making progress.
This is an INTENTIONAL change in behavior, and will break any client
of nbd-server-start that was not passing an explicit max-connections
parameter, yet expects more than 100 simultaneous connections. We are
not aware of any such client (as stated above, most clients aware of
MULTI_CONN get by just fine on 8 or 16 connections, and probably cope
with later connections failing by relying on the earlier connections;
libvirt has not yet been passing max-connections, but generally
creates NBD servers with the intent for a single client for the sake
of live storage migration; meanwhile, the KubeSAN project anticipates
a large cluster sharing multiple clients [up to 8 per node, and up to
100 nodes in a cluster], but it currently uses qemu-nbd with an
explicit --shared=0 rather than qemu-storage-daemon with
nbd-server-start).
We considered using a deprecation period (declare that omitting
max-parameters is deprecated, and make it mandatory in 3 releases -
then we don't need to pick an arbitrary default); that has zero risk
of breaking any apps that accidentally depended on more than 100
connections, and where such breakage might not be noticed under unit
testing but only under the larger loads of production usage. But it
does not close the denial-of-service hole until far into the future,
and requires all apps to change to add the parameter even if 100 was
good enough. It also has a drawback that any app (like libvirt) that
is accidentally relying on an unlimited default should seriously
consider their own CVE now, at which point they are going to change to
pass explicit max-connections sooner than waiting for 3 qemu releases.
Finally, if our changed default breaks an app, that app can always
pass in an explicit max-parameters with a larger value.
It is also intentional that the HMP interface to nbd-server-start is
not changed to expose max-connections (any client needing to fine-tune
things should be using QMP).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-12-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ericb: Expand commit message to summarize Dan's argument for why we
break corner-case back-compat behavior without a deprecation period] Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit c8a76dbd90c2f48df89b75bef74917f90a59b623) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eric Blake [Wed, 7 Aug 2024 13:50:01 +0000 (08:50 -0500)]
nbd/server: Plumb in new args to nbd_client_add()
Upcoming patches to fix a CVE need to track an opaque pointer passed
in by the owner of a client object, as well as request for a time
limit on how fast negotiation must complete. Prepare for that by
changing the signature of nbd_client_new() and adding an accessor to
get at the opaque pointer, although for now the two servers
(qemu-nbd.c and blockdev-nbd.c) do not change behavior even though
they pass in a new default timeout value.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240807174943.771624-11-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: s/LIMIT/MAX_SECS/ as suggested by Dan] Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit fb1c2aaa981e0a2fa6362c9985f1296b74f055ac) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic `fat16.py` driver
that handled writing correct sectors for us.
Added `vvfat` to the non-generic formats, as its not a normal image format.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <bb8149c945301aefbdf470a0924c07f69f9c087d.1721470238.git.amjadsharafi10@gmail.com>
[kwolf: Made mypy and pylint happy to unbreak 297] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c8f60bfb4345ea8343a53eaefe88d47b44c53f24) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vvfat: Fix reading files with non-continuous clusters
When reading with `read_cluster` we get the `mapping` with
`find_mapping_for_cluster` and then we call `open_file` for this
mapping.
The issue appear when its the same file, but a second cluster that is
not immediately after it, imagine clusters `500 -> 503`, this will give
us 2 mappings one has the range `500..501` and another `503..504`, both
point to the same file, but different offsets.
When we don't open the file since the path is the same, we won't assign
`s->current_mapping` and thus accessing way out of bound of the file.
From our example above, after `open_file` (that didn't open anything) we
will get the offset into the file with
`s->cluster_size*(cluster_num-s->current_mapping->begin)`, which will
give us `0x2000 * (504-500)`, which is out of bound for this mapping and
will produce some issues.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com>
Message-ID: <1f3ea115779abab62ba32c788073cdc99f9ad5dd.1721470238.git.amjadsharafi10@gmail.com>
[kwolf: Simplified the patch based on Amjad's analysis and input] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5eed3db336506b529b927ba221fe0d836e5b8819) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vvfat: Fix wrong checks for cluster mappings invariant
How this `abort` was intended to check for was:
- if the `mapping->first_mapping_index` is not the same as
`first_mapping_index`, which **should** happen only in one case,
when we are handling the first mapping, in that case
`mapping->first_mapping_index == -1`, in all other cases, the other
mappings after the first should have the condition `true`.
- From above, we know that this is the first mapping, so if the offset
is not `0`, then abort, since this is an invalid state.
The issue was that `first_mapping_index` is not set if we are
checking from the middle, the variable `first_mapping_index` is
only set if we passed through the check `cluster_was_modified` with the
first mapping, and in the same function call we checked the other
mappings.
One approach is to go into the loop even if `cluster_was_modified`
is not true so that we will be able to set `first_mapping_index` for the
first mapping, but since `first_mapping_index` is only used here,
another approach is to just check manually for the
`mapping->first_mapping_index != -1` since we know that this is the
value for the only entry where `offset == 0` (i.e. first mapping).
The field is marked as "the offset in the file (in clusters)", but it
was being used like this
`cluster_size*(nums)+mapping->info.file.offset`, which is incorrect.
Before this commit, the behavior when calling `commit_one_file` for
example with `offset=0x2000` (second cluster), what will happen is that
we won't fetch the next cluster from the fat, and instead use the first
cluster for the read operation.
This is due to off-by-one error here, where `i=0x2000 !< offset=0x2000`,
thus not fetching the next cluster.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <b97c1e1f1bc2f776061ae914f95d799d124fcd73.1721470238.git.amjadsharafi10@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b881cf00c99e03bc8a3648581f97736ff275b18b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
thomas [Fri, 12 Jul 2024 03:10:53 +0000 (11:10 +0800)]
virtio-net: Fix network stall at the host side waiting for kick
Patch 06b12970174 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.
The patch enables notification and checks whether the guest has
added some buffers since last check of available buffers when
the available buffers are insufficient. If no buffer is added,
return false, else recheck the available buffers in the loop.
If the available buffers are sufficient, disable notification
and return true.
Changes:
1. Change the return type of virtqueue_get_avail_bytes() from void
to int, it returns an opaque that represents the shadow_avail_idx
of the virtqueue on success, else -1 on error.
2. Add a new API: virtio_queue_enable_notification_and_check(),
it takes an opaque as input arg which is returned from
virtqueue_get_avail_bytes(). It enables notification firstly,
then checks whether the guest has added some buffers since
last check of available buffers or not by virtio_queue_poll(),
return ture if yes.
After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from the host.
It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
| need kick the host?
| NAPI continues
v
receive packets ---
| |
v |
free buf virtnet_poll
| |
v |
add buf to avail ring ---
|
v
... ...
On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.
Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.
The host may stall forever at the sequences below:
In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buffers.
step 1: The buf is not enough, for example, a big packet
needs 5 buf, but the available buf count is 3.
The host read current avail idx.
step 2: The guest adds some buf, then checks whether the
host is waiting for kick signal, not at this time.
The used ring is not empty, the guest continues
the second loop of NAPI.
step 3: The host writes the avail idx read from avail
ring to used ring as event idx via
virtio_queue_set_notification(q->rx_vq, 1).
step 4: At the end of the second loop of NAPI, recheck
whether kick is needed, as the event idx in the
used ring written by the host is beyound the
range of kick condition, the guest will not
send kick signal to the host.
Fixes: 06b12970174 ("virtio-net: fix network stall under load") Cc: qemu-stable@nongnu.org Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f937309fbdbb48c354220a3e7110c202ae4aa7fa) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in include/hw/virtio/virtio.h)
Ensure the queue index points to a valid queue when software RSS
enabled. The new calculation matches with the behavior of Linux's TAP
device with the RSS eBPF program.
Fixes: 4474e37a5b3a ("virtio-net: implement RX RSS processing") Reported-by: Zhibin Hu <huzhibin5@huawei.com> Cc: qemu-stable@nongnu.org Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f1595ceb9aad36a6c1da95bcb77ab9509b38822d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Fixes: CVE-2024-6505
Peter Maydell [Thu, 1 Aug 2024 09:15:03 +0000 (10:15 +0100)]
target/arm: Handle denormals correctly for FMOPA (widening)
The FMOPA (widening) SME instruction takes pairs of half-precision
floating point values, widens them to single-precision, does a
two-way dot product and accumulates the results into a
single-precision destination. We don't quite correctly handle the
FPCR bits FZ and FZ16 which control flushing of denormal inputs and
outputs. This is because at the moment we pass a single float_status
value to the helper function, which then uses that configuration for
all the fp operations it does. However, because the inputs to this
operation are float16 and the outputs are float32 we need to use the
fp_status_f16 for the float16 input widening but the normal fp_status
for everything else. Otherwise we will apply the flushing control
FPCR.FZ16 to the 32-bit output rather than the FPCR.FZ control, and
incorrectly flush a denormal output to zero when we should not (or
vice-versa).
(In commit 207d30b5fdb5b we tried to fix the FZ handling but
didn't get it right, switching from "use FPCR.FZ for everything" to
"use FPCR.FZ16 for everything".)
(Mjt: it is commit 4975f9fc4ea3 in stable-8.2)
Pass the CPU env to the sme_fmopa_h helper instead of an fp_status
pointer, and have the helper pass an extra fp_status into the
f16_dotadd() function so that we can use the right status for the
right parts of this operation.
Cc: qemu-stable@nongnu.org Fixes: 207d30b5fdb5 ("target/arm: Use FPST_F16 for SME FMOPA (widening)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2373 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 55f9f4ee018c5ccea81d8c8c586756d7711ae46f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marco Palumbi [Thu, 1 Aug 2024 09:15:02 +0000 (10:15 +0100)]
hw/arm/mps2-tz.c: fix RX/TX interrupts order
The order of the RX and TX interrupts are swapped.
This commit fixes the order as per the following documents:
* https://developer.arm.com/documentation/dai0505/latest/
* https://developer.arm.com/documentation/dai0521/latest/
* https://developer.arm.com/documentation/dai0524/latest/
* https://developer.arm.com/documentation/dai0547/latest/
Cc: qemu-stable@nongnu.org Signed-off-by: Marco Palumbi <Marco.Palumbi@tii.ae>
Message-id: 20240730073123.72992-1-marco@palumbi.it Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 5a558be93ad628e5bed6e0ee062870f49251725c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Wed, 31 Jul 2024 17:00:19 +0000 (18:00 +0100)]
hw/i386/amd_iommu: Don't leak memory in amdvi_update_iotlb()
In amdvi_update_iotlb() we will only put a new entry in the hash
table if to_cache.perm is not IOMMU_NONE. However we allocate the
memory for the new AMDVIIOTLBEntry and for the hash table key
regardless. This means that in the IOMMU_NONE case we will leak the
memory we alloacted.
Move the allocations into the if() to the point where we know we're
going to add the item to the hash table.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2452 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240731170019.3590563-1-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9a45b0761628cc59267b3283a85d15294464ac31) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 29 Jul 2024 12:05:33 +0000 (13:05 +0100)]
docs/sphinx/depfile.py: Handle env.doc2path() returning a Path not a str
In newer versions of Sphinx the env.doc2path() API is going to change
to return a Path object rather than a str. This was originally visible
in Sphinx 8.0.0rc1, but has been rolled back for the final 8.0.0
release. However it will probably emit a deprecation warning and is
likely to change for good in 9.0:
https://github.com/sphinx-doc/sphinx/issues/12686
Our use in depfile.py assumes a str, and if it is passed a Path
it will fall over:
Handler <function write_depfile at 0x77a1775ff560> for event 'build-finished' threw an exception (exception: unsupported operand type(s) for +: 'PosixPath' and 'str')
Wrapping the env.doc2path() call in str() will coerce a Path object
to the str we expect, and have no effect in older Sphinx versions
that do return a str.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2458 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240729120533.2486427-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 48e5b5f994bccf161dd88a67fdd819d4bfb400f1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 22 Jul 2024 17:29:57 +0000 (18:29 +0100)]
target/arm: Ignore SMCR_EL2.LEN and SVCR_EL2.LEN if EL2 is not enabled
When determining the current vector length, the SMCR_EL2.LEN and
SVCR_EL2.LEN settings should only be considered if EL2 is enabled
(compare the pseudocode CurrentSVL and CurrentNSVL which call
EL2Enabled()).
We were checking against ARM_FEATURE_EL2 rather than calling
arm_is_el2_enabled(), which meant that we would look at
SMCR_EL2/SVCR_EL2 when in Secure EL1 or Secure EL0 even if Secure EL2
was not enabled.
Use the correct check in sve_vqm1_for_el_sm().
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-5-peter.maydell@linaro.org
(cherry picked from commit f573ac059ed060234fcef4299fae9e500d357c33) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 22 Jul 2024 17:29:56 +0000 (18:29 +0100)]
target/arm: Avoid shifts by -1 in tszimm_shr() and tszimm_shl()
The function tszimm_esz() returns a shift amount, or possibly -1 in
certain cases that correspond to unallocated encodings in the
instruction set. We catch these later in the trans_ functions
(generally with an "a-esz < 0" check), but before we do the
decodetree-generated code will also call tszimm_shr() or tszimm_sl(),
which will use the tszimm_esz() return value as a shift count without
checking that it is not negative, which is undefined behaviour.
Avoid the UB by checking the return value in tszimm_shr() and
tszimm_shl().
Cc: qemu-stable@nongnu.org
Resolves: Coverity CID 1547617, 1547694 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-4-peter.maydell@linaro.org
(cherry picked from commit 76916dfa89e8900639c1055c07a295c06628a0bc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 22 Jul 2024 17:29:55 +0000 (18:29 +0100)]
target/arm: Fix UMOPA/UMOPS of 16-bit values
The UMOPA/UMOPS instructions are supposed to multiply unsigned 8 or
16 bit elements and accumulate the products into a 64-bit element.
In the Arm ARM pseudocode, this is done with the usual
infinite-precision signed arithmetic. However our implementation
doesn't quite get it right, because in the DEF_IMOP_64() macro we do:
sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0);
where NTYPE and MTYPE are uint16_t or int16_t. In the uint16_t case,
the C usual arithmetic conversions mean the values are converted to
"int" type and the multiply is done as a 32-bit multiply. This means
that if the inputs are, for example, 0xffff and 0xffff then the
result is 0xFFFE0001 as an int, which is then promoted to uint64_t
for the accumulation into sum; this promotion incorrectly sign
extends the multiply.
Avoid the incorrect sign extension by casting to int64_t before
the multiply, so we do the multiply as 64-bit signed arithmetic,
which is a type large enough that the multiply can never
overflow into the sign bit.
(The equivalent 8-bit operations in DEF_IMOP_32() are fine, because
the 8-bit multiplies can never overflow into the sign bit of a
32-bit integer.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2372 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-3-peter.maydell@linaro.org
(cherry picked from commit ea3f5a90f036734522e9af3bffd77e69e9f47355) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Mon, 22 Jul 2024 17:29:54 +0000 (18:29 +0100)]
target/arm: Don't assert for 128-bit tile accesses when SVL is 128
For an instruction which accesses a 128-bit element tile when
the SVL is also 128 (for example MOV z0.Q, p0/M, ZA0H.Q[w0,0]),
we will assert in get_tile_rowcol():
This happens because we calculate
len = ctz32(streaming_vec_reg_size(s)) - esz;$
but if the SVL and the element size are the same len is 0, and
the deposit operation asserts.
In this case the ZA storage contains exactly one 128 bit
element ZA tile, and the horizontal or vertical slice is just
that tile. This means that regardless of the index value in
the Ws register, we always access that tile. (In pseudocode terms,
we calculate (index + offset) MOD 1, which is 0.)
Special case the len == 0 case to avoid hitting the assertion
in tcg_gen_deposit_z_i32().
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240722172957.1041231-2-peter.maydell@linaro.org
(cherry picked from commit 56f1c0db928aae0b83fd91c89ddb226b137e2b21) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 23 Jul 2024 13:10:26 +0000 (14:10 +0100)]
hw/misc/bcm2835_property: Fix handling of FRAMEBUFFER_SET_PALETTE
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
(cherry picked from commit 0892fffc2abaadfb5d8b79bb0250ae1794862560) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix due to lack of v9.0.0-1812-g5d5f1b60916a "hw/misc: Implement mailbox properties for customer OTP and device specific private keys"
also remove now-unused local `n' variable which gets removed in the next change in this file, v9.0.0-2720-g32f1c201eedf "hw/misc/bcm2835_property: Avoid overflow in OTP access properties")
hw/char/bcm2835_aux: Fix assert when receive FIFO fills up
When a bare-metal application on the raspi3 board reads the
AUX_MU_STAT_REG MMIO register while the device's buffer is
at full receive FIFO capacity
(i.e. `s->read_count == BCM2835_AUX_RX_FIFO_LEN`) the
assertion `assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN)`
fails.
Reported-by: Cryptjar <cryptjar@junk.studio> Suggested-by: Cryptjar <cryptjar@junk.studio>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/459 Signed-off-by: Frederik van Hövell <frederik@fvhovell.nl> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 546d574b11e02bfd5b15cdf1564842c14516dfab) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using int32_t meant that the address was sign-extended to uint64_t
when passing to translator_ld*, triggering an assert.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2453 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 83340193b991e7a974f117baa86a04db1fd835a9) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Tue, 18 Jun 2024 12:19:58 +0000 (14:19 +0200)]
hw/virtio: Fix the de-initialization of vhost-user devices
The unrealize functions of the various vhost-user devices are
calling the corresponding vhost_*_set_status() functions with a
status of 0 to shut down the device correctly.
Now these vhost_*_set_status() functions all follow this scheme:
if (vhost_dev_is_started(&vvc->vhost_dev) == should_start) {
return;
}
if (should_start) {
/* ... do the initialization stuff ... */
} else {
/* ... do the cleanup stuff ... */
}
The problem here is virtio_device_should_start(vdev, 0) currently
always returns "true" since it internally only looks at vdev->started
instead of looking at the "status" parameter. Thus once the device
got started once, virtio_device_should_start() always returns true
and thus the vhost_*_set_status() functions return early, without
ever doing any clean-up when being called with status == 0. This
causes e.g. problems when trying to hot-plug and hot-unplug a vhost
user devices multiple times since the de-initialization step is
completely skipped during the unplug operation.
This bug has been introduced in commit 9f6bcfd99f ("hw/virtio: move
vm_running check to virtio_device_started") which replaced
should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
which later got replaced by virtio_device_should_start(). This blocked
the possibility to set should_start to false in case the status flag
VIRTIO_CONFIG_S_DRIVER_OK was not set.
Fix it by adjusting the virtio_device_should_start() function to
only consider the status flag instead of vdev->started. Since this
function is only used in the various vhost_*_set_status() functions
for exactly the same purpose, it should be fine to fix it in this
central place there without any risk to change the behavior of other
code.
Fixes: 9f6bcfd99f ("hw/virtio: move vm_running check to virtio_device_started") Buglink: https://issues.redhat.com/browse/RHEL-40708 Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240618121958.88673-1-thuth@redhat.com> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d72479b11797c28893e1e3fc565497a9cae5ca16) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 23 Jul 2024 15:09:27 +0000 (16:09 +0100)]
util/async.c: Forbid negative min/max in aio_context_set_thread_pool_params()
aio_context_set_thread_pool_params() takes two int64_t arguments to
set the minimum and maximum number of threads in the pool. We do
some bounds checking on these, but we don't catch the case where the
inputs are negative. This means that later in the function when we
assign these inputs to the AioContext::thread_pool_min and
::thread_pool_max fields, which are of type int, the values might
overflow the smaller type.
A negative number of threads is meaningless, so make
aio_context_set_thread_pool_params() return an error if either min or
max are negative.
Resolves: Coverity CID 1547605 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723150927.1396456-1-peter.maydell@linaro.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 851495571d14fe2226c52b9d423f88a4f5460836) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Bibo Mao [Tue, 16 Jul 2024 21:41:23 +0000 (23:41 +0200)]
hw/intc/loongson_ipi: Access memory in little endian
Loongson IPI is only available in little-endian,
so use that to access the guest memory (in case
we run on a big-endian host).
Cc: qemu-stable@nongnu.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Fixes: f6783e3438 ("hw/loongarch: Add LoongArch ipi interrupt support")
[PMD: Extracted from bigger commit, added commit description] Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Tested-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240718133312.10324-3-philmd@linaro.org>
(cherry picked from commit 2465c89fb983eed670007742bd68c7d91b6d6f85) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixups for 8.2, for lack of: v9.0.0-583-g91d0b151de4c "hw/intc/loongson_ipi: Implement IOCSR address space for MIPS" v9.0.0-582-gb4a12dfc2132 "hw/intc/loongarch_ipi: Rename as loongson_ipi" v8.2.0-545-gfdd6ee0b7653 "hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops")
chardev/char-win-stdio.c: restore old console mode
If I use `-serial stdio` on Windows, after QEMU exits, the terminal
could not handle arrow keys and tab any more. Because stdio backend
on Windows sets console mode to virtual terminal input when starts,
but does not restore the old mode when finalize.
This small patch saves the old console mode and set it back.
Signed-off-by: Ziming Song <s.ziming@hotmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <ME3P282MB25488BE7C39BF0C35CD0DA5D8CA82@ME3P282MB2548.AUSP282.PROD.OUTLOOK.COM>
(cherry picked from commit 903cc9e1173e0778caa50871e8275c898770c690) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
However, sgx_epc_get_section is called by CPUID regardless of whether
SGX state has been initialized or which platform is in use. Check
whether the machine has the right QOM class and if not behave as if
there are no EPC sections.
Fixes: 1dec2e1f19f ("i386: Update SGX CPUID info according to hardware/KVM/user input", 2021-09-30) Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2142 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 13be929aff804581b21e69087a9caf3698fd5c3c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c8a ("intel-iommu: PASID support") Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a3c8d7e38550c3d5a46e6fa94ffadfa625a4861d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio-snd: check for invalid param shift operands
When setting the parameters of a PCM stream, we compute the bit flag
with the format and rate values as shift operand to check if they are
set in supported_formats and supported_rates.
If the guest provides a format/rate value which when shifting 1 results
in a value bigger than the number of bits in
supported_formats/supported_rates, we must report an error.
Previously, this ended up triggering the not reached assertions later
when converting to internal QEMU values.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2416 Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2416-fix-v1-manos.pitsidianakis@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9b6083465fb8311f2410615f8303a41f580a2a20) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When reading input audio in the virtio-snd input callback,
virtio_snd_pcm_in_cb(), we do not check whether the iov can actually fit
the data buffer. This is because we use the buffer->size field as a
total-so-far accumulator instead of byte-size-left like in TX buffers.
This triggers an out of bounds write if the size of the virtio queue
element is equal to virtio_snd_pcm_status, which makes the available
space for audio data zero. This commit adds a check for reaching the
maximum buffer size before attempting any writes.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2427 Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2427-fix-v1-manos.pitsidianakis@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 98e77e3dd8dd6e7aa9a7dffa60f49c8c8a49d4e3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zhao Liu [Fri, 5 Jul 2024 11:39:54 +0000 (12:39 +0100)]
hw/cxl/cxl-host: Fix segmentation fault when getting cxl-fmw property
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64bc ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com> Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a207d5f87d66f7933b50677e047498fc4af63e1f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zheyu Ma [Tue, 2 Jul 2024 23:13:03 +0000 (01:13 +0200)]
hw/nvme: fix memory leak in nvme_dsm
The allocated memory to hold LBA ranges leaks in the nvme_dsm function. This
happens because the allocated memory for iocb->range is not freed in all
error handling paths.
Fix this by adding a free to ensure that the allocated memory is properly freed.
ASAN log:
==3075137==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 480 byte(s) in 6 object(s) allocated from:
#0 0x55f1f8a0eddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7f531e0f6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x55f1faf1f091 in blk_aio_get block/block-backend.c:2583:12
#3 0x55f1f945c74b in nvme_dsm hw/nvme/ctrl.c:2609:30
#4 0x55f1f945831b in nvme_io_cmd hw/nvme/ctrl.c:4470:16
#5 0x55f1f94561b7 in nvme_process_sq hw/nvme/ctrl.c:7039:29
Cc: qemu-stable@nongnu.org Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit c510fe78f1b7c966524489d6ba752107423b20c8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hvf: arm: Do not advance PC when raising an exception
hvf did not advance PC when raising an exception for most unhandled
system registers, but it mistakenly advanced PC when raising an
exception for GICv3 registers.
Cc: qemu-stable@nongnu.org Fixes: a2260983c655 ("hvf: arm: Add support for GICv3") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240716-pmu-v3-4-8c7c1858a227@daynix.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 30a1690f2402e6c1582d5b3ebcf7940bfe2fad4b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 16 Jul 2024 10:30:32 +0000 (11:30 +0100)]
target/arm: LDAPR should honour SCTLR_ELx.nAA
In commit c1a1f80518d360b when we added the FEAT_LSE2 relaxations to
the alignment requirements for atomic and ordered loads and stores,
we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no
immediate offset. These instructions were handled in the old decoder
as part of disas_ldst_atomic(), but unlike all the other insns that
function decoded (LDADD, LDCLR, etc) these insns are "ordered", not
"atomic", so they should be using check_ordered_align() rather than
check_atomic_align(). Commit c1a1f80518d360b used
check_atomic_align() regardless for everything in
disas_ldst_atomic(). We then carried that incorrect check over in
the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled
by trans_LDAPR().
The effect is that when FEAT_LSE2 is implemented, these instructions
don't honour the SCTLR_ELx.nAA bit and will generate alignment
faults when they should not.
(The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr()
and then in trans_LDAPR_i() and trans_STLR_i(), and have always used
the correct check_ordered_align().)
Use check_ordered_align() in trans_LDAPR().
Cc: qemu-stable@nongnu.org Fixes: c1a1f80518d360b ("target/arm: Relax ordered/atomic alignment checks for LSE2") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
(cherry picked from commit 25489b521b61b874c4c6583956db0012a3674e3a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 16 Jul 2024 10:30:32 +0000 (11:30 +0100)]
target/arm: Fix handling of LDAPR/STLR with negative offset
When we converted the LDAPR/STLR instructions to decodetree we
accidentally introduced a regression where the offset is negative.
The 9-bit immediate field is signed, and the old hand decoder
correctly used sextract32() to get it out of the insn word,
but the ldapr_stlr_i pattern in the decode file used "imm:9"
instead of "imm:s9", so it treated the field as unsigned.
Fix the pattern to treat the field as a signed immediate.
Cc: qemu-stable@nongnu.org Fixes: 2521b6073b7 ("target/arm: Convert LDAPR/STLR (imm) to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
(cherry picked from commit 5669d26ec614b3f4c56cf1489b9095ed327938b1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Vincent Fu [Fri, 3 May 2024 17:50:04 +0000 (13:50 -0400)]
hw/nvme: fix number of PIDs for FDP RUH update
The number of PIDs is in the upper 16 bits of cdw10. So we need to
right-shift by 16 bits instead of only a single bit.
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation") Cc: qemu-stable@nongnu.org Signed-off-by: Vincent Fu <vincent.fu@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 3936bbdf9a2e9233875f850c7576c79d06add261) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Trigger generation of broadcast RARP frames to update network
[...]
Arguments
~~~~~~~~~
The members of "AnnounceParameters"
Except when the command takes its arguments unboxed , i.e. it doesn't
have 'boxed': true, we generate *nothing*. A few commands have a
reference in their doc comment to compensate, but most don't.
Example:
##
# @blockdev-snapshot-sync:
#
# Takes a synchronous snapshot of a block device.
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
##
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync',
'allow-preconfig': true }
char-stdio: Restore blocking mode of stdout on exit
qemu_chr_open_fd() sets stdout into non-blocking mode. Restore the old
fd flags on exit to avoid breaking unsuspecting applications that run on
the same terminal after qemu and don't expect to get EAGAIN.
While at at, also ensure term_exit is called once (at the moment it's
called both from char_stdio_finalize() and as the atexit() hook.
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
Commit d152cdd6f6 ("virtio: use virtio accessor to access packed event")
switched using of address_space_read_cached() to virito_lduw_phys_cached()
to access packed descriptor event.
When we used address_space_read_cached(), we needed to call
virtio_tswap16s() to handle the endianess of the field, but
virito_lduw_phys_cached() already handles it internally, so we no longer
need to call virtio_tswap16s() (as the commit had done for `off_wrap`,
but forgot for `flags`).
Fixes: d152cdd6f6 ("virtio: use virtio accessor to access packed event") Cc: jasowang@redhat.com Cc: qemu-stable@nongnu.org Reported-by: Xoykie <xoykie@gmail.com> Link: https://lore.kernel.org/qemu-devel/CAFU8RB_pjr77zMLsM0Unf9xPNxfr_--Tjr49F_eX32ZBc5o2zQ@mail.gmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240701075208.19634-1-sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7aa6492401e95fb296dec7cda81e67d91f6037d7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cindy Lu [Tue, 28 May 2024 08:48:15 +0000 (16:48 +0800)]
virtio-pci: Fix the failure process in kvm_virtio_pci_vector_use_one()
In function kvm_virtio_pci_vector_use_one(), the function will only use
the irqfd/vector for itself. Therefore, in the undo label, the failing
process is incorrect.
To fix this, we can just remove this label.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt") Cc: qemu-stable@nongnu.org Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240528084840.194538-1-lulu@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a113d041e8d0b152d72a7c2bf47dd09aabf9ade2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 25 Apr 2024 12:56:02 +0000 (14:56 +0200)]
block: Parse filenames only when explicitly requested
When handling image filenames from legacy options such as -drive or from
tools, these filenames are parsed for protocol prefixes, including for
the json:{} pseudo-protocol.
This behaviour is intended for filenames that come directly from the
command line and for backing files, which may come from the image file
itself. Higher level management tools generally take care to verify that
untrusted images don't contain a bad (or any) backing file reference;
'qemu-img info' is a suitable tool for this.
However, for other files that can be referenced in images, such as
qcow2 data files or VMDK extents, the string from the image file is
usually not verified by management tools - and 'qemu-img info' wouldn't
be suitable because in contrast to backing files, it already opens these
other referenced files. So here the string should be interpreted as a
literal local filename. More complex configurations need to be specified
explicitly on the command line or in QMP.
This patch changes bdrv_open_inherit() so that it only parses filenames
if a new parameter parse_filename is true. It is set for the top level
in bdrv_open(), for the file child and for the backing file child. All
other callers pass false and disable filename parsing this way.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 7ead946998610657d38d1a505d5f25300d4ca613) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: backport patch to 8.2, without: v8.2.0-132-g6bc30f194985 "graph-lock: remove AioContext locking" v8.2.0-133-gb49f4755c7fa "block: remove AioContext locking")
Kevin Wolf [Thu, 25 Apr 2024 12:49:40 +0000 (14:49 +0200)]
iotests/270: Don't store data-file with json: prefix in image
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 7e1110664ecbc4826f3c978ccb06b6c1bce823e6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 25 Apr 2024 12:49:40 +0000 (14:49 +0200)]
iotests/244: Don't store data-file with protocol in image
We want to disable filename parsing for data files because it's too easy
to abuse in malicious image files. Make the test ready for the change by
passing the data file explicitly in command line options.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit 2eb42a728d27a43fdcad5f37d3f65706ce6deba5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 11 Apr 2024 13:06:01 +0000 (15:06 +0200)]
qcow2: Don't open data_file with BDRV_O_NO_IO
One use case for 'qemu-img info' is verifying that untrusted images
don't reference an unwanted external file, be it as a backing file or an
external data file. To make sure that calling 'qemu-img info' can't
already have undesired side effects with a malicious image, just don't
open the data file at all with BDRV_O_NO_IO. If nothing ever tries to do
I/O, we don't need to have it open.
This changes the output of iotests case 061, which used 'qemu-img info'
to show that opening an image with an invalid data file fails. After
this patch, it succeeds. Replace this part of the test with a qemu-io
call, but keep the final 'qemu-img info' to show that the invalid data
file is correctly displayed in the output.
Fixes: CVE-2024-4467 Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
(cherry picked from commit bd385a5298d7062668e804d73944d52aec9549f1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Chuang Xu [Tue, 11 Jun 2024 03:23:14 +0000 (11:23 +0800)]
i386/cpu: fixup number of addressable IDs for processor cores in the physical package
When QEMU is started with:
-cpu host,host-cache-info=on,l3-cache=off \
-smp 2,sockets=1,dies=1,cores=1,threads=2
Guest can't acquire maximum number of addressable IDs for processor cores in
the physical package from CPUID[04H].
When creating a CPU topology of 1 core per package, host-cache-info only
uses the Host's addressable core IDs field (CPUID.04H.EAX[bits 31-26]),
resulting in a conflict (on the multicore Host) between the Guest core
topology information in this field and the Guest's actual cores number.
Fix it by removing the unnecessary condition to cover 1 core per package
case. This is safe because cores_per_pkg will not be 0 and will be at
least 1.
Fixes: d7caf13b5fcf ("x86: cpu: fixup number of addressable IDs for logical processors sharing cache") Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com> Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com> Signed-off-by: Chuang Xu <xuchuangxclwt@bytedance.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240611032314.64076-1-xuchuangxclwt@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 903916f0a017fe4b7789f1c6c6982333a5a71876) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup for 8.2 due to other changes in this area past 9.0)
Thomas Huth [Thu, 18 Apr 2024 10:10:47 +0000 (12:10 +0200)]
tests: Update our CI to use CentOS Stream 9 instead of 8
RHEL 9 (and thus also the derivatives) have been available since two
years now, so according to QEMU's support policy, we can drop the active
support for the previous major version 8 now.
Another reason for doing this is that Centos Stream 8 will go EOL soon:
"After May 31, 2024, CentOS Stream 8 will be archived
and no further updates will be provided."
Thus upgrade our CentOS Stream container to major version 9 now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 641b1efe01b2dd6e7ac92f23d392dcee73508746) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fabiano Rosas [Mon, 17 Jun 2024 18:57:17 +0000 (15:57 -0300)]
migration: Fix file migration with fdset
When the "file:" migration support was added we missed the special
case in the qemu_open_old implementation that allows for a particular
file name format to be used to refer to a set of file descriptors that
have been previously provided to QEMU via the add-fd QMP command.
When using this fdset feature, we should not truncate the migration
file because being given an fd means that the management layer is in
control of the file and will likely already have some data written to
it. This is further indicated by the presence of the 'offset'
argument, which indicates the start of the region where QEMU is
allowed to write.
Fix the issue by replacing the O_TRUNC flag on open by an ftruncate
call, which will take the offset into consideration.
Fixes: 385f510df5 ("migration: file URI offset") Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Prasad Pandit <pjp@fedoraproject.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit 6d3279655ac49b806265f08415165f471d33e032) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in migration/file.c due to missing v8.2.0-1958-gb7b03eb614d0 "migration/multifd: Add outgoing QIOChannelFile support")
tcg/loongarch64: Fix tcg_out_movi vs some pcrel pointers
Simplify the logic for two-part, 32-bit pc-relative addresses.
Rather than assume all such fit in int32_t, do some arithmetic
and assert a result, do some arithmetic first and then check
to see if the pieces are in range.
Cc: qemu-stable@nongnu.org Fixes: dacc51720db ("tcg/loongarch64: Implement tcg_out_mov and tcg_out_movi") Reviewed-by: Song Gao <gaosong@loongson.cn> Reported-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 521d7fb3ebdf88112ed13556a93e3037742b9eb8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ilya Leoshkevich [Fri, 14 Jun 2024 15:46:40 +0000 (17:46 +0200)]
linux-user: Make TARGET_NR_setgroups affect only the current thread
Like TARGET_NR_setuid, TARGET_NR_setgroups should affect only the
calling thread, and not the entire process. Therefore, implement it
using a syscall, and not a libc call.
Cc: qemu-stable@nongnu.org Fixes: 19b84f3c35d7 ("added setgroups and getgroups syscalls") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240614154710.1078766-1-iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 54b27921026df384f67df86f04c39539df375c60) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
projects / thirdparty / qemu.git / log
