Peter Seebach [Thu, 21 Feb 2013 17:40:22 +0000 (11:40 -0600)]
siteinfo/insane: More n32 fixups
For perfectly sound reasons, n32 MIPS is a mips64 subset denoted by an
ABI change, thus, "mips64-vendor-linux-gnun32" rather than
"mips-vendor-linux-gnu". A previous change had fixed up insane.bbclass
to recognize these, which mostly worked, but left SITEINFO_BITS set to
64.
Since bit-32 is processed first, and there are specific checks for
linux-gnun32, modify the mips64-linux-gnun32 lines to specify "bit-32",
so things that check SITEINFO_BITS get the right answer. Also, drop
the mips{,el}-linux-gnun32 lines, because that's not a valid combination;
n32 only makes sense for mips64.
Also, the insane.bbclass change spelled "mips64el" as "mipsel64", which
no one noticed because no one's using little-endian n32, apparently.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Fri, 22 Feb 2013 00:56:57 +0000 (16:56 -0800)]
tiny-init: Mount devtmpfs manually
When using an initramfs, the default for poky-tiny, the kernel can't
automatically mount devtmpfs. Ensure it is mounted. This eliminates the
need to create the ptmx device.
Darren Hart [Thu, 21 Feb 2013 17:28:02 +0000 (09:28 -0800)]
install: Look for grub2 files on the initramfs, not rootfs
Fixes [YOCTO #3870] atom-pc - cannot boot image on netbook after install
The problem here is that grub2 is installed but a grub 1 menu.lst is
created at install time. At boot, grub2 doesn't find a grub.cfg file and
drops to the grub shell.
This happens because the installer is looking for 40_custom (a grub2
file) on the rootfs, but grub2 isn't installed on the rootfs. It exists
in the initramfs. Patching the installer to look on the initramfs
resolves the problem.
Note that the problem may have occurred if grub2 used to be installed on
the rootfs but was later removed. In any case, the installer is HORRIBLE
and really needs to be completely redesigned as part of the deployment
effort. For now, this should get the live image installer limping along
again.
Mark Hatle [Thu, 21 Feb 2013 23:18:29 +0000 (17:18 -0600)]
rootfs_rpm.bbclass: Handle multilib configures with different OS values
[ CQID: WIND00404082 ]
It is possible for the TARGET_OS to change dependending on the multilib used
for a given package build. mips64 has two potential TARGET_OS values: linux
and linux-gnun32. The RPM and Smart setup needs to distinguish between the
two otherwise packages of the "non-default" TARGET_OS may be ignored as
incompatible.
Kang Kai [Wed, 20 Feb 2013 06:06:17 +0000 (14:06 +0800)]
external-python-tarball: code refactoring
external-python-tarball only can be built when inherit package_ipk now.
Update it to reuse existed populate sdk code that it could be built for
rpm and deb too.
Remove var DEPENDS, SDK_* and flags of do_populate_sdk because they are
already defined in populate_sdk bbclasses.
Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Wed, 20 Feb 2013 11:11:12 +0000 (05:11 -0600)]
genext2fs.inc: Add nativesdk build capability
In order to generate new disk images for ext(2,3,4) which contain root
file systems we do not want to rely on the host's genext2fs which may
have different arguments and features, so allow the nativesdk
genext2fs binary to be built.
Mark Hatle [Wed, 20 Feb 2013 01:27:14 +0000 (19:27 -0600)]
man: Remove wildcard from SRC_URI
[ CQID: WIND00402802 ]
Remove the wildcard from the SRC_URI. This causes problems when you .bbappend
and add a FILESEXTRAPATHS entry. The unpack task may be unable to find the
files to unpack leading to an error.
Avoid wildcards at all costs...
Note, remove both man-1.5m2-multiple.patch and man-1.6e-lzma+xz-support.patch,
they were not being applied in the previous version. The later also fails to
apply when added to the SRC_URI.
Mark Hatle [Wed, 20 Feb 2013 19:31:11 +0000 (13:31 -0600)]
rootfs_rpm.bbclass: Reorder feed priority based on multilib image setting
[ YOCTO #3915 ]
[ CQID: WIND00404309 ]
When doing a multilib image build, such as bitbake lib32-core-image-sato, the
system needs to reorder the priority level of the feeds. If it does not
reorder the priorities, then 64-bit items can be selected by the automatic
dependency resolution in Smart.
Hongxu Jia [Thu, 21 Feb 2013 06:22:16 +0000 (14:22 +0800)]
base-passwd.preinst:fix creating passwd and group error
Create files `passwd' and `group' in `$D${sysconfdir}', if `$D${sysconfdir}'
does not exist, there is an error:
...
cannot create $D${sysconfdir}/passwd: Directory nonexistent
cannot create $D${sysconfdir}/group: Directory nonexistent
...
Ross Burton [Tue, 5 Feb 2013 14:01:04 +0000 (14:01 +0000)]
xserver-xf86-config: empty generic xorg.conf
The idea of a generic xorg.conf is meaningless, especially when they specify the
"intel" driver. Empty this file so that unless the BSP specifies it's own
xorg.conf, no xorg.conf file is installed.
Ross Burton [Tue, 5 Feb 2013 14:00:40 +0000 (14:00 +0000)]
xserver-xf86-config: don't ship empty xorg.conf
Many hardware platforms can autodetect their hardware and don't need a xorg.conf
at all. Make it easy for BSPs to not ship a xorg.conf by not installing empty
xorg.conf files.
Cristian Iorga [Mon, 18 Feb 2013 12:50:30 +0000 (14:50 +0200)]
pulseaudio: upgrade to 3.0
ARM Neon instruction set compilation error fixed.
Build system disables Neon optimisations if
ARM target does not support it.
BT support dependent on bluez and sbc support.
sbc package added as a dependency.
Marko Lindqvist [Sun, 17 Feb 2013 08:53:10 +0000 (10:53 +0200)]
curl: update to upstream version 7.29.0
- obsolete_automake_macros.patch removed as it's part of upstream.
- dont_override_ac_config_macro_dir.patch removed as no longer needed.
- pkgconfig_fix.patch updated to apply cleanly
Marko Lindqvist [Sun, 17 Feb 2013 08:52:21 +0000 (10:52 +0200)]
oprofileui-server: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Marko Lindqvist [Sun, 17 Feb 2013 08:51:23 +0000 (10:51 +0200)]
webkit-gtk: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Song.Li [Fri, 22 Feb 2013 10:52:19 +0000 (18:52 +0800)]
pakcage.bbclass:use a better way to cut -dev/-dbg suffix
In pakcage.bbclass,function replace('-dev', '') is
used to cut '-dev' suffix. but it will cause the
name "lib32-device-dev" to "lib32ice",
so change it to [:-4].
Paul Eggleton [Thu, 21 Feb 2013 15:23:35 +0000 (15:23 +0000)]
bitbake: build.py: avoid deleting taint files when writing stamps
The stamp cleaning process that occurs before writing out new stamps for
a task was deleting taint files as well. This resulted in tasks that
were forcibly re-executed using the -f or -C command line options to
have their previous output restored from shared state when called upon a
second time, because the taint value was no longer incorporated into the
task signature and thus it was reverting to its previous value. This
also affected the kernel menuconfig command in OE-Core.
Note that the taint file *is* still deleted when doing -c clean, which
is the desired behaviour.
Richard Purdie [Wed, 20 Feb 2013 07:05:11 +0000 (23:05 -0800)]
bitbake: Revert "fetch2: Adapt encode/decode url to use URI class"
This reverts commit 21fe2683aefde10e847e66c11c26d4f4c1e07cfd
since bitbake-selftest doesn't pass when this is applied and
we're seeing multiple build failures from this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 19 Feb 2013 21:31:52 +0000 (21:31 +0000)]
rootfs_ipkg: fix BAD_RECOMMENDATIONS handling
If multiple versions of the same package are in the package feed then the
generate status file would only contains a "deinstall" status for the last one,
which meant that BAD_RECOMMENDATIONS wouldn't actually work.
Use awk instead of grep and stop reading when we reach a newline, so we only
ever output a single stanza.
Laurentiu Palcu [Tue, 19 Feb 2013 14:15:03 +0000 (16:15 +0200)]
toolchain-scripts.bbclass: add PYTHONHOME variable to environment-setup
When relocating the SDK, applications using python will search for
python modules in the default location and will fail to start.
The below errors are thrown by gdb, for example:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
In order to overcome this, add the PYTHONHOME variable to the
environment-setup script for both standalone toolchain and
adt-installer. No need to do that for meta-ide-support environment
script since this toolchain does not get relocated.
Otavio Salvador [Sun, 17 Feb 2013 17:53:09 +0000 (17:53 +0000)]
dbus: Drop x11 support from nativesdk
This avoid a libx11 dependency for nativesdk as it is not intended to
be run in the toolchain. We also remove the dbus-launch as without x11
support it might case trouble for user
Richard Purdie [Mon, 18 Feb 2013 13:19:50 +0000 (13:19 +0000)]
devshell.bbclass: Allow running devshell and fakeroot together
Currently its hard to run a devshell complete with fakeroot context. This
patch allows the fakeroot flag on the task to do this, as with any other
task. Since we may need to start X terminal applications, we need to
only start the fakeroot session on the final command, hence the hoops
this code jumps through.
As always with fakeroot, you can break out and run a command without
the fake permissions with syntax like "PSEUDO_UNLOAD=1 <command>"
Laurentiu Palcu [Mon, 18 Feb 2013 11:40:12 +0000 (11:40 +0000)]
populate_sdk_base.bbclass: fix SDKTARGETSYSROOT value
Currently, SDKTARGETSYSROOT points to PACKAGE_ARCH which, sometimes, can
be set to MACHINE_ARCH. When this happens, the default target sysroot
passed to the cross-canadian toolchain, which points to TUNE_PKGARCH,
will be different from the directory where the target sysroot has been
deployed.
In order to fix this, use REAL_MULTIMACH_TARGET_SYS variable instead of
MULTIMACH_TARGET_SYS.
Peter Seebach [Sun, 17 Feb 2013 23:31:33 +0000 (23:31 +0000)]
pseudo.inc: pseudo 1.5 uprev, support extra config flags
The pseudo 1.5 update is a moderately experimental set of changes
which ought to improve performance. With these changes, pseudo
uses an in-memory sqlite database which is lushed on exit,
the protocol is changed to reduce waiting for server responses,
and pseudo can suppress any and all fsync/fdatasync type operations.
This last feature is optional, and not on by default, so we need
to pass in an extra configure argument, but that argument wouldn't
be known to an older configure, so... Enter PSEUDO_EXTRA_OPTS which
is passed to configure, and which pseudo_1.5.bb sets by default to
"--enable-force-async". (I haven't added it in pseudo_git.bb, but
maybe it should be changed; I'm not quite as sure there.)
The justification for these changes is that, for most of the real-world
build cases I deal with, they produce a 25% or more reduction in the
build time of a project. This increases when a system is heavily
loaded.
Otavio Salvador [Sun, 17 Feb 2013 17:53:12 +0000 (17:53 +0000)]
meta-toolchain-qt.inc: Use CXX when linking
We should use CXX compiler when linking objects as done in regular
builds inside of OE-Core. This fixes issues we've been seeing in field
where we needed to change it byhand so the toolchain could work.
Olof Johansson [Tue, 29 Jan 2013 07:50:11 +0000 (08:50 +0100)]
bitbake: fetch2: Add SFTP fetcher
This fetcher differs from the SSH fetcher in that it adheres more
strictly to the SECSH URI internet draft --- it uses the sftp://
instead of the ssh:// scheme, and it uses sftp instead of scp.
Olof Johansson [Tue, 29 Jan 2013 07:50:07 +0000 (08:50 +0100)]
bitbake: fetch2: Add a class representing a generic URI
A class representing a generic URI, with methods for accessing the URI
components, and stringifies to the URI. This class should be a bit more
flexible than the existing {encode,decode}_url functions in that it
supports more components (e.g. port) and that it does not rely on a
specific order on the return values. This makes it easy to add new
properties without affecting the API.
Richard Purdie [Sun, 17 Feb 2013 09:00:29 +0000 (09:00 +0000)]
package_rpm/dev/ipk/tar: Drop unused functions
The package_xxx_install functions date from a different era and are not used by
anything. In the rpm case, they're simply unimplemented, in the tar case they're
using broken whitespace and deprecated functions. We might as well clean
out the old broken unused code.
Richard Purdie [Sun, 17 Feb 2013 08:57:17 +0000 (08:57 +0000)]
package_rpm/deb/ipk: Error if we don't find packages when creating the package index
If for whatever reason the package directory is empty of packages, it
makes sense to error early rather than later in what become much
more obtuse errors. This adds in a sanity check to each of the packaging
backends. It also removes the duplicate createrepo call since the
core index creation function now uses this directly after the switch
to smart.
Richard Purdie [Fri, 15 Feb 2013 12:30:39 +0000 (12:30 +0000)]
local.conf.sample: Enhance the SSTATE_MIRRORS example
By using downloadfilename in the url, symlinks in the download
directory can be avoided and hence directories with large numbers
of files are less likely.
Khem Raj [Thu, 14 Feb 2013 04:02:00 +0000 (04:02 +0000)]
systemd.bbclass: Dont use libdir and base_libdir for units
systemd always uses /lib and /usr/lib to store unit files
so using libdir and base_libdir is incorrect. It will work
where libdir is usr/lib and base_libdir is /lib but wont work
when say its /lib64
Add a check to make sure that SYSTEMD_PACKAGES are part of PACKAGES
too, otherwise error out
Cristiana Voicu [Tue, 12 Feb 2013 13:27:32 +0000 (15:27 +0200)]
sanity.bbclass: when bblayers.conf is updated, it invokes a reparse
When bblayers.conf is updated(when sanity check is running), it should
tell to bitbake to reparse configuration files. I will send a patch to
bitbake-devel, with the actions needed in bitbake and hob.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Wed, 13 Feb 2013 11:26:18 +0000 (13:26 +0200)]
libpng: update to upstream version 1.5.14
obsolete_automake_macros.patch removed as it's not part of upstream.
The only changes to license texts are latest libpng version number
and release dates.
Laurentiu Palcu [Wed, 13 Feb 2013 09:33:32 +0000 (11:33 +0200)]
xev: upgrade to 1.2.1
Licence didn't change, the end line for computing the licence md5sum was
inside the actual code which, eventually changed. Adjust it to the right
line.
ERROR: No new tasks can be excuted since the disk space monitor action
is "STOPTASKS"!
ERROR: Unknown event: <bb.event.DiskFull object at 0x2ab6310>
This is because we don't handle the event bb.event.DiskFull in
knotty.py, we don't want the knotty to do anything here since we have
done everything in monitordisk.py, so just ignore this event would fix
the problem.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
