Julia Evans [Wed, 15 Oct 2025 13:13:29 +0000 (13:13 +0000)]
doc: git-pull: clarify options for integrating remote branch
From user feedback:
- One user is confused about the current default ("I was convinced that
the git default was still to merge on pull")
- One user is confused about why "git fetch" isn't mentioned earlier
- One user says they always forget what the arguments to `git pull` are
and that it's not immediately obvious that `--no-rebase` means "merge"
- One user wants `--ff-only` to be mentioned
Resolve this by listing the options for integrating the the remote
branch. This should help users figure out at a glance which one they
want to do, and make it clearer that --ff-only is the default.
Signed-off-by: Julia Evans <julia@jvns.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Evans [Wed, 15 Oct 2025 13:13:28 +0000 (13:13 +0000)]
doc: git-pull: move <repository> and <refspec> params
From user feedback:
- it's confusing that we use both <branch> and <refspec> to refer to the
second argument
- one user is not clear about what `refs/heads/*:refs/remotes/origin/*`
is meant to be an example of ("is it like a path?")
The DESCRIPTION section is also doing a lot right now: it's trying to
describe both how the <repository> and <refspec> arguments work (which
is pretty complex, as seen in the DEFAULT BEHAVIOUR section)
as well as how `git pull` calls `git fetch` and merge/rebase/etc
depending on the arguments.
Handle this by moving the description of the <repository> and <refspec>
arguments to the OPTIONS section, so that we can focus on the
merge/rebase/etc behaviour in the DESCRIPTION section, and refer folks
to the later sections for details.
Use the term "upstream" instead of 'the "remote" and "merge"
configuration for the current branch' since users are more likely to
know what an "upstream" is.
Signed-off-by: Julia Evans <julia@jvns.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of scanning for the remaining items to see if there are
still commits to be explored in the queue, use khash to remember
which items are still on the queue (an unacceptable alternative is
to reserve one object flag bits).
* rs/describe-with-lazy-queue-and-oidset:
describe: use oidset in finish_depth_computation()
Windows "real-time monitoring" interferes with the execution of
tests and affects negatively in both correctness and performance,
which has been disabled in Gitlab CI.
* ps/gitlab-ci-disable-windows-monitoring:
gitlab-ci: disable realtime monitoring to unbreak Windows jobs
Junio C Hamano [Fri, 12 Sep 2025 17:41:19 +0000 (10:41 -0700)]
Merge branch 'ms/refs-exists'
"git refs exists" that works like "git show-ref --exists" has been
added.
* ms/refs-exists:
t: add test for git refs exists subcommand
t1422: refactor tests to be shareable
t1403: split 'show-ref --exists' tests into a separate file
builtin/refs: add 'exists' subcommand
Junio C Hamano [Fri, 12 Sep 2025 17:41:18 +0000 (10:41 -0700)]
Merge branch 'ps/object-store-midx-dedup-info'
Further code clean-up for multi-pack-index code paths.
* ps/object-store-midx-dedup-info:
midx: compute paths via their source
midx: stop duplicating info redundant with its owning source
midx: write multi-pack indices via their source
midx: load multi-pack indices via their source
midx: drop redundant `struct repository` parameter
odb: simplify calling `link_alt_odb_entry()`
odb: return newly created in-memory sources
odb: consistently use "dir" to refer to alternate's directory
odb: allow `odb_find_source()` to fail
odb: store locality in object database sources
Junio C Hamano [Fri, 12 Sep 2025 17:41:18 +0000 (10:41 -0700)]
Merge branch 'je/doc-add'
Documentation for "git add" has been updated.
* je/doc-add:
doc: rephrase the purpose of the staging area
doc: git-add: simplify discussion of ignored files
doc: git-add: clarify intro & add an example
Junio C Hamano [Wed, 10 Sep 2025 21:28:23 +0000 (14:28 -0700)]
Merge branch 'master' of https://github.com/j6t/git-gui
* 'master' of https://github.com/j6t/git-gui:
git-gui: sync Makefiles with git.git
git-gui: fix error handling of Revert Changes command
git-gui--askyesno (mingw): use Git for Windows' icon, if available
git-gui--askyesno: allow overriding the window title
git gui: set GIT_ASKPASS=git-gui--askpass if not set yet
git-gui: provide question helper for retry fallback on Windows
git-gui: simplify using nice(1)
git-gui: simplify PATH de-duplication
Junio C Hamano [Wed, 10 Sep 2025 21:27:52 +0000 (14:27 -0700)]
Merge branch 'master' of https://github.com/j6t/gitk
* 'master' of https://github.com/j6t/gitk:
gitk: add README with usage, build, and contribution details
gitk: fix trackpad scrolling for Tcl/Tk 8.7+
gitk: use <Button-3> for ctx menus on macOS with Tcl 8.7+
Junio C Hamano [Mon, 8 Sep 2025 21:54:35 +0000 (14:54 -0700)]
Merge branch 'tc/last-modified'
A new command "git last-modified" has been added to show the closest
ancestor commit that touched each path.
* tc/last-modified:
last-modified: use Bloom filters when available
t/perf: add last-modified perf script
last-modified: new subcommand to show when files were last modified
Junio C Hamano [Mon, 8 Sep 2025 21:54:34 +0000 (14:54 -0700)]
Merge branch 'ds/ls-files-lazy-unsparse'
"git ls-files <pathspec>..." should not necessarily have to expand
the index fully if a sparsified directory is excluded by the
pathspec; the code is taught to expand the index on demand to avoid
this.
* ds/ls-files-lazy-unsparse:
ls-files: conditionally leave index sparse
Junio C Hamano [Mon, 8 Sep 2025 21:54:34 +0000 (14:54 -0700)]
Merge branch 'am/xdiff-hash-tweak'
Inspired by Ezekiel's recent effort to showcase Rust interface, the
hash function implementation used to hash lines have been updated
to the one used for ELF symbol lookup by Glibc.
Adam Dinwoodie [Sat, 15 Feb 2025 21:19:03 +0000 (21:19 +0000)]
git-gui: sync Makefiles with git.git
In git.git, commit 5309c1e9fb39 (Makefile: set default goals in
makefiles, 2025-02-15) touched two Makefiles in the git-git/ directory.
Import these changes, so that the trees can converge again with the
next merge of this repository into git.git.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Johannes Sixt [Sat, 6 Sep 2025 09:59:09 +0000 (11:59 +0200)]
Merge branch 'js/ask-yesno'
* js/ask-yesno:
git-gui--askyesno (mingw): use Git for Windows' icon, if available
git-gui--askyesno: allow overriding the window title
git gui: set GIT_ASKPASS=git-gui--askpass if not set yet
git-gui: provide question helper for retry fallback on Windows
Toon Claes [Fri, 8 Aug 2025 09:59:43 +0000 (11:59 +0200)]
t0450: add allowlist for builtins with missing .adoc
Before we were silently skipping all builtins that don't have a matching
.adoc file. This is overly loose and might skip documentation files
when it shouldn't, for example when there was a typo in the filename.
To ensure no new builtins are added without documentation, add an
allowlist: t0450/adoc-missing. In this file only builtin commands that
do *not* have a corresponding .adoc file shall be listed. If there is a
mismatch, fail the test. This should force future contributions to
either add an .adoc, or add the builtin name to the allowlist file.
Signed-off-by: Toon Claes <toon@iotcl.com>
[jc: squashed Patrick's "missing file fix" in] Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 2 Sep 2025 18:24:52 +0000 (20:24 +0200)]
describe: use oidset in finish_depth_computation()
Depth computation can end early if all remaining commits are flagged.
The current code determines if that's the case by checking all queue
items each time it dequeues a flagged commit. This can cause
quadratic complexity.
We could simply count the flagged items in the queue and then update
that number as we add and remove items. That would provide a general
speedup, but leave one case where we have to scan the whole queue: When
we flag a previously seen, but unflagged commit. It could be on the
queue and then we'd have to decrease our count.
We could dedicate an object flag to track queue membership, but that
would leave less for candidate tags, affecting the results. So use a
hash table, specifically an oidset of commit hashes, to track that.
This avoids quadratic behaviour in all cases and provides a nice
performance boost over the previous commit, 08bb69d70f (describe: use
prio_queue_replace(), 2025-08-03):
Benchmark 1: ./git_08bb69d70f describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 855.3 ms ± 1.3 ms [User: 790.8 ms, System: 49.9 ms]
Range (min … max): 853.7 ms … 857.8 ms 10 runs
Benchmark 2: ./git describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 610.8 ms ± 1.7 ms [User: 546.9 ms, System: 49.3 ms]
Range (min … max): 608.9 ms … 613.3 ms 10 runs
Summary
./git describe $(git rev-list v2.41.0..v2.47.0) ran
1.40 ± 0.00 times faster than ./git_08bb69d70f describe $(git rev-list v2.41.0..v2.47.0)
Helped-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meet Soni [Tue, 26 Aug 2025 06:41:10 +0000 (12:11 +0530)]
t: add test for git refs exists subcommand
Add a test script, `t/t1462-refs-exists.sh`, for the `git refs exists`
command.
This script acts as a simple driver, leveraging the shared test library
created in the preceding commit. It works by overriding the
`$git_show_ref_exists` variable to "git refs exists" and then sourcing the
shared library (`t/show-ref-exists-tests.sh`).
This approach ensures that `git refs exists` is tested against the
entire comprehensive test suite of `git show-ref --exists`, verifying
that it acts as a compatible drop-in replacement.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: shejialuo <shejialuo@gmail.com> Signed-off-by: Meet Soni <meetsoni3017@gmail.com> Acked-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meet Soni [Tue, 26 Aug 2025 06:41:09 +0000 (12:11 +0530)]
t1422: refactor tests to be shareable
In preparation for adding tests for the `git refs exists` command,
refactor the existing t1422 test suite to make its logic shareable.
Move the core test logic from `t1422-show-ref-exists.sh` to
`show-ref-exists-tests.sh` file. Inside this script, replace hardcoded
calls to "git show-ref --exists" with the `$git_show_ref_exists`
variable.
The original `t1422-show-ref-exists.sh` script now becomes a simple
"driver". It is responsible for setting the default value of the
variable and then sourcing the test library.
This structure follows an established pattern for sharing tests and
prepares the test suite for the `refs exists` tests to be added in a
subsequent commit.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: shejialuo <shejialuo@gmail.com> Signed-off-by: Meet Soni <meetsoni3017@gmail.com> Acked-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meet Soni [Tue, 26 Aug 2025 06:41:08 +0000 (12:11 +0530)]
t1403: split 'show-ref --exists' tests into a separate file
The test file for git-show-ref(1), `t1403-show-ref.sh`, contains a group
of tests for the '--exists' flag. To improve organization and to prepare
for refactoring these tests to be shareable, move the '--exists' tests
and their corresponding setup logic into a self-contained test suite,
`t1422-show-ref-exists.sh`.
This is a pure code-movement refactoring with no change in test coverage
or behavior.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: shejialuo <shejialuo@gmail.com> Signed-off-by: Meet Soni <meetsoni3017@gmail.com> Acked-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meet Soni [Tue, 26 Aug 2025 06:41:07 +0000 (12:11 +0530)]
builtin/refs: add 'exists' subcommand
As part of the ongoing effort to consolidate reference handling,
introduce a new `exists` subcommand. This command provides the same
functionality and exit-code behavior as `git show-ref --exists`, serving
as its modern replacement.
The logic for `show-ref --exists` is minimal. Rather than creating a
shared helper function which would be overkill for ~20 lines of code,
its implementation is intentionally duplicated here. This contrasts with
`git refs list`, where sharing the larger implementation of
`for-each-ref` was necessary.
Documentation for the new subcommand is also added to the `git-refs(1)`
man page.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: shejialuo <shejialuo@gmail.com> Signed-off-by: Meet Soni <meetsoni3017@gmail.com> Acked-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitlab-ci: disable realtime monitoring to unbreak Windows jobs
The GitLab CI runners using Windows machines have realtime monitoring
via Windows Defender enabled by default. This has just now started to
cause issues in our CI jobs using Microsoft Visual Studio:
Program 'meson.exe' failed to run: Operation did not complete successfully because the file contains a virus or
potentially unwanted softwareAt line:356 char:1
+ meson setup build --vsenv -Dperl=disabled -Dbackend_max_links=1 -Dcre ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~.
At line:356 char:1
+ meson setup build --vsenv -Dperl=disabled -Dbackend_max_links=1 -Dcre ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ResourceUnavailable: (:) [], ApplicationFailedException
+ FullyQualifiedErrorId : NativeCommandFailed
The detected issue is more likely than not completely bogus, but it
breaks the jobs.
Fix the issue by disabling realtime monitoring. Besides unbreaking CI,
it also improves our build times a bit:
- Building Git goes from 26 to 22 minutes.
- Executing tests goes from ~1h for one slice of tests to ~30 minutes.
This is still painfully slow, but the issue here is that the Windows
runners on GitLab CI are quite underwhelming overall.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 2 Sep 2025 15:21:27 +0000 (08:21 -0700)]
Merge branch 'ds/doc-ggg-pr-fork-clarify'
Update the instruction to use of GGG in the MyFirstContribution
document to say that a GitHub PR could be made against `git/git`
instead of `gitgitgadget/git`.
* ds/doc-ggg-pr-fork-clarify:
doc: clarify which remotes can be used with GitGitGadget
Johannes Sixt [Mon, 1 Sep 2025 18:20:08 +0000 (20:20 +0200)]
git-gui: fix error handling of Revert Changes command
The command Revert Changes has two different erroneous behaviors
depending on the Tcl version used.
The command uses a "chord" facility where different "notes" are
evaluated asynchronously and any error is reported after all of them
have finished. The intent is that a private namespace is used where
the notes can store the error state. Tcl 9 changed namespace handling
in a subtle way, as https://www.tcl-lang.org/software/tcltk/9.0.html
summarizes under "Notable incompatibilities":
Unqualified varnames resolved in current namespace, not global.
Note that in almost all cases where this causes a change, the
change is actually the removal of a latent bug.
And that's exactly what happens here.
- Under Tcl 9:
- When the command operates without any errors, the variable `err`
is never set. When the error handler wants to inspect `err` (in
the correct private namespace), it does not find it and a Tcl
error about an unset variable occurs. Incidentally, this is also
the case when the user cancels the operation with the option
"Do Nothing"!
On the other hand, when an error occurs during the operation, `err`
is set and found as intended.
Check for the existence of the variable `err` before the attempt to
read it.
- Under Tcl 8.6:
The error handler looks up `err` in the global namespace, which is
bogus and unintended. The variable is set due to the many
`catch ... err` that occur during startup in the global namespace.
- When the command operates without any errors, the error handler
finds the global `err`, which happens to be the empty string at
this point, and no error is reported.
On the other hand, when an error occurs during the operation, the
global `err` is set and found, so that an error is reported as
desired.
However, the value of `err` persists in the global namespace. When
the command is repeated, an error is reported again, even if there
was actually no error, and even "Do Nothing" was used to cancel
the operation.
Clear the global `err` before the operation begins.
The lingering error message is not a problem under Tcl 9, because a
prestine namespace is established every time the command is used.
This fixes https://github.com/j6t/git-gui/issues/21.
Helped-by: Igor Stepushchik Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Julia Evans [Fri, 29 Aug 2025 11:55:02 +0000 (11:55 +0000)]
doc: rephrase the purpose of the staging area
Git does not really "store the contents of the next commit"
anywhere; rather, you the user use the index to prepare it.
Signed-off-by: Julia Evans <julia@jvns.ca>
[jc; made the change relative to what is already in 'next'] Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 29 Aug 2025 16:44:37 +0000 (09:44 -0700)]
Merge branch 'jk/describe-blob'
"git describe <blob>" misbehaves and/or crashes in some corner
cases, which has been taught to exit with failure gracefully.
* jk/describe-blob:
describe: pass commit to describe_commit()
describe: handle blob traversal with no commits
describe: catch unborn branch in describe_blob()
describe: error if blob not found
describe: pass oid struct by const pointer
"git fetch" can clobber a symref that is dangling when the
remote-tracking HEAD is set to auto update, which has been
corrected.
* jk/no-clobber-dangling-symref-with-fetch:
refs: do not clobber dangling symrefs
t5510: prefer "git -C" to subshell for followRemoteHEAD tests
t5510: stop changing top-level working directory
t5510: make confusing config cleanup more explicit
Junio C Hamano [Fri, 29 Aug 2025 16:44:36 +0000 (09:44 -0700)]
Merge branch 'ps/reftable-libgit2-cleanup'
Code clean-ups.
* ps/reftable-libgit2-cleanup:
refs/reftable: always reload stacks when creating lock
reftable: don't second-guess errors from flock interface
reftable/stack: handle outdated stacks when compacting
reftable/stack: allow passing flags to `reftable_stack_add()`
reftable/stack: fix compiler warning due to missing braces
reftable/stack: reorder code to avoid forward declarations
reftable/writer: drop Git-specific `QSORT()` macro
reftable/writer: fix type used for number of records
Toon Claes [Tue, 5 Aug 2025 09:33:58 +0000 (11:33 +0200)]
last-modified: use Bloom filters when available
Our 'git last-modified' performs a revision walk, and computes a diff at
each point in the walk to figure out whether a given revision changed
any of the paths it considers interesting.
When changed-path Bloom filters are available, we can avoid computing
many such diffs. Before computing a diff, we first check if any of the
remaining paths of interest were possibly changed at a given commit by
consulting its Bloom filter. If any of them are, we are resigned to
compute the diff.
If none of those queries returned "maybe", we know that the given commit
doesn't contain any changed paths which are interesting to us. So, we
can avoid computing it in this case.
Toon Claes [Tue, 5 Aug 2025 09:33:57 +0000 (11:33 +0200)]
t/perf: add last-modified perf script
This just runs some simple last-modified commands. We already test
correctness in the regular suite, so this is just about finding
performance regressions from one version to another.
Based-on-patch-by: Jeff King <peff@peff.net> Signed-off-by: Toon Claes <toon@iotcl.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Toon Claes [Tue, 5 Aug 2025 09:33:56 +0000 (11:33 +0200)]
last-modified: new subcommand to show when files were last modified
Similar to git-blame(1), introduce a new subcommand
git-last-modified(1). This command shows the most recent modification to
paths in a tree. It does so by expanding the tree at a given commit,
taking note of the current state of each path, and then walking
backwards through history looking for commits where each path changed
into its final commit ID.
Based-on-patch-by: Jeff King <peff@peff.net> Improved-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Toon Claes <toon@iotcl.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui--askyesno: allow overriding the window title
"Question?" is maybe not the most informative thing to ask. In the
absence of better information, it is the best we can do, of course.
However, Git for Windows' auto updater just learned the trick to use
git-gui--askyesno to ask the user whether to update now or not. And in
this scripted scenario, we can easily pass a command-line option to
change the window title.
So let's support that with the new `--title <title>` option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Heiko Voigt [Thu, 28 Aug 2025 08:58:47 +0000 (08:58 +0000)]
git-gui: provide question helper for retry fallback on Windows
Make use of the new environment variable GIT_ASK_YESNO to support the
recently implemented fallback in case unlink, rename or rmdir fail for
files in use on Windows. The added dialog will present a yes/no question
to the the user which will currently be used by the windows compat layer
to let the user retry a failed file operation.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The compatObjectFormat extension is used to hide an incomplete
feature that is not yet usable for any purpose other than
developing the feature further. Document it as such to discourage
its use by mere mortals.
* bc/doc-compat-object-format-not-working:
docs: note that extensions.compatobjectformat is incomplete
Junio C Hamano [Thu, 28 Aug 2025 18:28:58 +0000 (11:28 -0700)]
Merge branch 'jk/fetch-check-graph-objects-fix'
Under a race against another process that is repacking the
repository, especially a partially cloned one, "git fetch" may
mistakenly think some objects we do have are missing, which has
been corrected.
* jk/fetch-check-graph-objects-fix:
fetch-pack: re-scan when double-checking graph objects
Junio C Hamano [Thu, 28 Aug 2025 18:28:57 +0000 (11:28 -0700)]
Merge branch 'sg/line-log-merge-optim'
"git log -L..." compared trees of multiple parents with the tree of the
merge result in an unnecessarily inefficient way.
* sg/line-log-merge-optim:
line-log: simplify condition checking for merge commits
line-log: initialize diff queue in process_ranges_ordinary_commit()
line-log: get rid of the parents array in process_ranges_merge_commit()
line-log: avoid unnecessary tree diffs when processing merge commits
Junio C Hamano [Thu, 28 Aug 2025 18:28:57 +0000 (11:28 -0700)]
Merge branch 'js/progress-delay-fix'
The start_delayed_progress() function in the progress eye-candy API
did not clear its internal state, making an initial delay value
larger than 1 second ineffective, which has been corrected.
* js/progress-delay-fix:
progress: pay attention to (customized) delay time
Derrick Stolee [Fri, 15 Aug 2025 16:12:53 +0000 (16:12 +0000)]
ls-files: conditionally leave index sparse
When running 'git ls-files' with a pathspec, the index entries get
filtered according to that pathspec before iterating over them in
show_files(). In 78087097b8 (ls-files: add --sparse option,
2021-12-22), this iteration was prefixed with a check for the '--sparse'
option which allows the command to output directory entries; this
created a pre-loop call to ensure_full_index().
However, when a user runs 'git ls-files' where the pathspec matches
directories that are recursively matched in the sparse-checkout, there
are not any sparse directories that match the pathspec so they would not
be written to the output. The expansion in this case is just a
performance drop for no behavior difference.
Replace this global check to expand the index with a check inside the
loop for a matched sparse directory. If we see one, then expand the
index and continue from the current location. This is safe since the
previous entries in the index did not have any sparse directories and
thus would remain stable in this expansion.
A test in t1092 confirms that this changes the behavior.
Signed-off-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ruoyu Zhong [Wed, 27 Aug 2025 02:12:19 +0000 (10:12 +0800)]
gitk: fix trackpad scrolling for Tcl/Tk 8.7+
TIP 684 [1] introduced TouchpadScroll events in Tcl/Tk 8.7, separating
trackpad gestures from traditional MouseWheel events. This broke
trackpad scrolling in gitk where trackpads generate TouchpadScroll
events instead of MouseWheel events.
Fix that by adding TouchpadScroll event bindings for all scrollable
widgets following the TIP 684 specification. Implement a new
precisescrollval proc to handle the smaller delta values from
TouchpadScroll events, using appropriate scaling factors that seem
sensible on my MacBook.
David Aguilar [Tue, 26 Aug 2025 23:35:25 +0000 (16:35 -0700)]
Makefile: build libgit-rs and libgit-sys serially
"make -JN" with INCLUDE_LIBGIT_RS enabled causes cargo lock warnings
and can trigger ld errors during the build.
The build errors are caused by two inner "make" invocations getting
triggered concurrently: once inside of libgit-sys and another inside of
libgit-rs.
Make libgit-rs depend on libgit-sys so that "make" prevents them
from running concurrently. Apply the same logic to the test invocations.
Use cargo's "--manifest-path" option instead of "cd" in the recipes.
Signed-off-by: David Aguilar <davvid@gmail.com> Acked-by: Kyle Lippincott <spectral@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Mon, 25 Aug 2025 22:11:01 +0000 (22:11 +0000)]
docs: note that extensions.compatobjectformat is incomplete
The compatibility object format is only implemented for loose objects,
not packed objects, so anyone attempting to push or fetch data into a
repository with this option will likely not see it work as expected. In
addition, the underlying storage of loose object mapping is likely to
change because the current format is inefficient and does not handle
important mapping information such as that of submodules.
It would have been preferable to initially document that this was not
yet ready for prime time, but we did not do so. We hinted at the fact
that this functionality is incomplete in the description, but did not
say so explicitly. Let's do so now: indicate that this feature is
incomplete and subject to change and that the option is not designed to
be used by end users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 25 Aug 2025 19:16:12 +0000 (21:16 +0200)]
progress: pay attention to (customized) delay time
Using one of the start_delayed_*() functions, clients of the progress
API can request that a progress meter is only shown after some time.
To do that, the implementation intends to count down the number of
seconds stored in struct progress by observing flag progress_update,
which the timer interrupt handler sets when a second has elapsed. This
works during the first second of the delay. But the code forgets to
reset the flag to zero, so that subsequent calls of display_progress()
think that another second has elapsed and decrease the count again
until zero is reached. Due to the frequency of the calls, this happens
without an observable delay in practice, so that the effective delay is
always just one second.
This bug has been with us since the inception of the feature. Despite
having been touched on various occasions, such as 8aade107dd84
(progress: simplify "delayed" progress API), 9c5951cacf5c (progress:
drop delay-threshold code), and 44a4693bfcec (progress: create
GIT_PROGRESS_DELAY), the short delay went unnoticed.
Copy the flag state into a local variable and reset the global flag
right away so that we can detect the next clock tick correctly.
Since we have not had any complaints that the delay of one second is
too short nor that GIT_PROGRESS_DELAY is ignored, people seem to be
comfortable with the status quo. Therefore, set the default to 1 to
keep the current behavior.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 25 Aug 2025 21:22:03 +0000 (14:22 -0700)]
Merge branch 'lo/repo-info'
A new subcommand "git repo" gives users a way to grab various
repository characteristics.
* lo/repo-info:
repo: add the --format flag
repo: add the field layout.shallow
repo: add the field layout.bare
repo: add the field references.format
repo: declare the repo command
Junio C Hamano [Mon, 25 Aug 2025 21:22:03 +0000 (14:22 -0700)]
Merge branch 'ps/commit-graph-wo-globals'
Remove dependency on the_repository and other globals from the
commit-graph code, and other changes unrelated to de-globaling.
* ps/commit-graph-wo-globals:
commit-graph: stop passing in redundant repository
commit-graph: stop using `the_repository`
commit-graph: stop using `the_hash_algo`
commit-graph: refactor `parse_commit_graph()` to take a repository
commit-graph: store the hash algorithm instead of its length
commit-graph: stop using `the_hash_algo` via macros
Junio C Hamano [Mon, 25 Aug 2025 21:22:01 +0000 (14:22 -0700)]
Merge branch 'ja/doc-lint-sections-and-synopsis'
Doc lint updates to encourage the newer and easier-to-use
`synopsis` format, with fixes to a handful of existing uses.
* ja/doc-lint-sections-and-synopsis:
doc lint: check that synopsis manpages have synopsis inlines
doc:git-for-each-ref: fix styling and typos
doc: check for absence of the form --[no-]parameter
doc: check for absence of multiple terms in each entry of desc list
doc: check well-formedness of delimited sections
doc: test linkgit macros for well-formedness
Junio C Hamano [Mon, 25 Aug 2025 21:22:00 +0000 (14:22 -0700)]
Merge branch 'tc/diff-tree-max-depth'
"git diff-tree" learned "--max-depth" option.
* tc/diff-tree-max-depth:
diff: teach tree-diff a max-depth parameter
within_depth: fix return for empty path
combine-diff: zero memory used for callback filepairs
doc: config: replace backtick with apostrophe for possessive
Revert back to “Git's” which was used before d30c5cc4592 (doc: convert
git-mergetool options to new synopsis style, 2025-05-25) accidentally
changed it.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 24 Aug 2025 05:00:40 +0000 (01:00 -0400)]
fetch-pack: re-scan when double-checking graph objects
The fetch code tries to avoid asking the remote side for an object we
already have. It does this by traversing recent commits reachable from
our refs looking for matches. Commit 5d4cc78f72 (fetch-pack: die if in
commit graph but not obj db, 2024-11-05) introduced an extra check
there: if we think we have an object because it's in the commit graph,
we double-check that we actually have it in our object database with a
call to odb_has_object().
But that call does not pass any flags, and so the function won't call
reprepared_packed_git() if it does not find the object. That opens us up
to the usual race against some other process repacking the odb:
1. We scan the list of packs in objects/pack but haven't yet opened them.
2. Somebody else packs the object into a new pack (which we don't know
about), and deletes the old pack it was in.
3. Our odb_has_object() calls tries to open that old pack, but finds it
is gone. We declare that we don't have the object.
And this causes us to erroneously complain and abort the fetch, thinking
our commit-graph and object database are out of sync. Instead, we should
pass HAS_OBJECT_RECHECK_PACKED, which will add a new step:
4. We re-scan the pack directory again, find the new pack, and locate
the object.
Often the fetch code tries to avoid these kinds of re-scans if it's
likely that we won't have the object. If the other side has told us
about object X and we want to know if we have it, we'll skip the re-scan
(to avoid spending a lot of effort when there are many such objects). We
can accept the racy false negative in that case because the worst case
is that we ask the other side to send us the object.
But this is not one of those cases. These are objects which are
accessible from _our_ refs, and which we already found in the commit
graph file. We should have them, and if we don't, we'll die()
immediately. So the performance impact is negligible, and getting the
right answer is important.
There's no test here because it's inherently racy. In fact, I had
trouble even developing a minimal test. The problem seen in the wild can
be produced like this:
# Any git.git mirror which supports partial clones; I think this
# should work with any repo that contains submodules, but note that
# $obj below is specific to this repo
url=https://github.com/git/git.git
# This is a commit that is not at the tip of any branches (so after
# we have it, we'll still have some commits to fetch).
obj=cf6f63ea6bf35173e02e18bdc6a4ba41288acff9
What happens here is that the initial fetch grabs that older commit (and
its ancestors) but no trees or blobs, and the subsequent checkout grabs
the necessary trees and blobs just for that commit. The final fetch
spawns a long sequence of child fetches due to fetch_submodules(), which
wants to check whether there have been any gitlink modifications which
should trigger a fetch of the related submodule (we'll leave aside the
irony that we did not even check out any submodules yet).
That series of fetches causes us to accumulate packs, which eventually
triggers background maintenance to run. That repacks all-into-one, and
the pack containing $obj goes away in favor of a new pack. And then the
fetch eventually fails with:
In the scenario above, the race becomes likely because of the long
series of quick fetches. But I _think_ the bug is independent of partial
clones entirely, and you could run into the same thing with a single
fetch, some other process running "git repack" simultaneously, and a bit
of bad luck. I haven't been able to reproduce, though. I'm not sure if
that's because there's some mis-analysis above, or if the race window is
just small enough that it's hard to trigger.
At any rate, re-scanning here seems like an obviously correct thing to
do with no downside, and it does fix the partial-clone case shown above.
Reported-by: Дилян Палаузов <dilyan.palauzov@aegee.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Fri, 22 Aug 2025 18:52:24 +0000 (20:52 +0200)]
doc/format-patch: adjust Thunderbird MUA hint to new add-on
There are three tips how to compose a non-line-wrapped patch with
Thunderbird. The first one suggests use of an add-on. The one
referenced has long been superseded by a different one. Update the
link to the new one. Mention that additional configuration is
required to make the add-on work.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniele Sassoli [Sat, 23 Aug 2025 09:12:11 +0000 (09:12 +0000)]
doc: clarify which remotes can be used with GitGitGadget
The docs mostly point to using git/git as one's remote, however, when it
comes to Sending a PR to GitGitGadget section, the reader is told to use
gitgitgadget/git, with no mention of git/git, potentially leading to
some confusion.
Clarify that both gitgitgadget/git and git/git can be used, albeit with
some differences.
Signed-off-by: Daniele Sassoli <danielesassoli@gmail.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 25 Aug 2025 12:49:57 +0000 (12:49 +0000)]
path-walk: create initializer for path lists
The previous change fixed a bug in 'git repack -adf --path-walk' that
was due to an update to how path lists are initialized and missing some
important cases when processing the pending objects.
This change takes the three critical places where path lists are
initialized and combines them into a static method. This simplifies the
callers somewhat while also helping to avoid a missed update in the
future.
The other places where a path list (struct type_and_oid_list) is
initialized is for the following "fixed" lists:
These lists are created and consumed in different ways, with only the
root trees being passed into the logic that cares about the
"maybe_interesting" bit. It is appropriate to keep these uses separate.
Signed-off-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 25 Aug 2025 12:49:56 +0000 (12:49 +0000)]
path-walk: fix setup of pending objects
Users reported an issue where objects were missing from their local
repositories after a full repack using 'git repack -adf --path-walk'.
This was alarming and took a while to create a reproducer. Here, we fix
the bug and include a test case that would fail without this fix.
The root cause is that certain objects existed in the index and had no
second versions. These objects are usually blobs, though trees can be
included if a cache-tree exists. The issue is that the revision walk
adds these objects to the "pending" list and the path-walk API forgets
to mark the lists it creates at this point as "maybe_interesting". If
these paths only ever have a single version in the history of the repo
(including the current staged version) then the parent directory never
tries to add a new object to the list and mark the list as
"maybe_interesting". Thus, when walking the list later, the group is
skipped as it is expected that no objects are interesting. This happens
even when there are actually no UNINTERESTING objects at all! This is
based on the optimization enabled by the pack.useSparse=true config
option, which is the default.
Thus, we create a test case that demonstrates the many cases of this
issue for reproducibility:
1. File a/b/c has only one committed version.
2. Files a/i and x/y only exist as staged changes.
3. Tree x/ only exists in the cache-tree.
After performing a non-path-walk repack to force all loose objects into
packfiles, run a --path-walk repack followed by 'git fsck'. This fsck is
what fails with the following errors:
error: invalid object 100644 f2e41136... for 'a/b/c'
This is the dropped instance of the single-versioned a/b/c file.
Note that since the staged root tree is missing, the fsck output cannot
even report that the staged x/ tree is missing as well.
The core problem here is that the "maybe_interesting" member of 'struct
type_and_oid_list' is not initialized to '1'. This member was added in 6333e7ae0b (path-walk: mark trees and blobs as UNINTERESTING,
2024-12-20) in a way to help when creating packfiles for a small commit
range using the sparse path algorithm (enabled by pack.useSparse=true).
The idea here is that the list is marked as "maybe_interesting" if an
object is added that does not have the UNINTERESTING flag on it. Later,
this is checked again in case all objects in the list were marked
UNINTERESTING after that point in time. In this case, the algorithm
skips the list as there is no reason to visit it.
This leads to the problem where the "maybe_interesting" member was not
appropriately initialized when the list is created from pending objects.
Initializing this in the correct places fixes the bug.
To reduce risk of similar bugs around initializing this structure, a
follow-up change will make initializing lists use a shared method.
Signed-off-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 24 Aug 2025 19:06:44 +0000 (21:06 +0200)]
line-log: simplify condition checking for merge commits
In process_ranges_arbitrary_commit() the condition deciding whether
the given commit is not a merge, i.e. that it doesn't have more than
one parent, is head-scratchingly backwards, flip it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 24 Aug 2025 19:06:43 +0000 (21:06 +0200)]
line-log: initialize diff queue in process_ranges_ordinary_commit()
process_ranges_ordinary_commit() uses a local diff queue variable,
which it leaves uninitialized before passing its address to
queue_diffs(). This is not an issue, because at the end of that
function the contents of an other diff queue is moved into it by
simply overwriting whatever is in there, i.e. without reading any
uninitialized memory.
Still, seeing the uninitialized diff queue being passed around scared
me more than once, so out of caution let's make sure that it's
initialized.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 24 Aug 2025 19:06:42 +0000 (21:06 +0200)]
line-log: get rid of the parents array in process_ranges_merge_commit()
We can easily iterate through the parents of a merge commit without
turning the list of parents into a dynamically allocated array of
parents, so let's do so. This way we can avoid a memory allocation
for each processed merge commit, though its effect on runtime seems to
be unmeasurable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 24 Aug 2025 19:06:41 +0000 (21:06 +0200)]
line-log: avoid unnecessary tree diffs when processing merge commits
In process_ranges_merge_commit(), the line-level log first creates an
array of diff queues by iterating over all parents of a merge commit
and computing a tree diff for each. Then in a second loop it iterates
over those diff queues, and if it finds that none of the interesting
paths were modified in one of them, then it will return early. This
means that when none of the interesting paths were modified between a
merge and its first parent, then the tree diff between the merge and
its second (Nth...) parent was computed in vain.
Unify these two loops, so when it iterates over all parents of a merge
commit, then it first computes the tree diff between the merge and
that particular parent and then processes the resulting diff queue
right away. This way we can spare some tree diff computing, thereby
speeding up line-level log in repositories with mergy history:
# git.git, 25.8% of commits are merges:
Benchmark 1: ./git_v2.51.0 -C ~/src/git log -L:'lookup_commit(':commit.c v2.51.0
Time (mean ± σ): 1.001 s ± 0.009 s [User: 0.906 s, System: 0.095 s]
Range (min … max): 0.991 s … 1.023 s 10 runs
Benchmark 2: ./git -C ~/src/git log -L:'lookup_commit(':commit.c v2.51.0
Time (mean ± σ): 445.5 ms ± 3.4 ms [User: 358.8 ms, System: 84.3 ms]
Range (min … max): 440.1 ms … 450.3 ms 10 runs
Summary
'./git -C ~/src/git log -L:'lookup_commit(':commit.c v2.51.0' ran
2.25 ± 0.03 times faster than './git_v2.51.0 -C ~/src/git log -L:'lookup_commit(':commit.c v2.51.0'
# linux.git, 7.5% of commits are merges:
Benchmark 1: ./git_v2.51.0 -C ~/src/linux.git log -L:build_restore_work_registers:arch/mips/mm/tlbex.c v6.16
Time (mean ± σ): 3.246 s ± 0.007 s [User: 2.835 s, System: 0.409 s]
Range (min … max): 3.232 s … 3.255 s 10 runs
Benchmark 2: ./git -C ~/src/linux.git log -L:build_restore_work_registers:arch/mips/mm/tlbex.c v6.16
Time (mean ± σ): 2.467 s ± 0.014 s [User: 2.113 s, System: 0.353 s]
Range (min … max): 2.455 s … 2.505 s 10 runs
Summary
'./git -C ~/src/linux.git log -L:build_restore_work_registers:arch/mips/mm/tlbex.c v6.16' ran
1.32 ± 0.01 times faster than './git_v2.51.0 -C ~/src/linux.git log -L:build_restore_work_registers:arch/mips/mm/tlbex.c v6.16'
And since now each iteration computes a tree diff and processes its
result, there is no reason to store the diff queues for each merge
parent anymore, so replace that diff queue array with a loop-local
diff queue variable. With this change the static free_diffqueues()
helper function in 'line-log.c' has no more callers left, remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ruoyu Zhong [Sun, 24 Aug 2025 10:07:58 +0000 (18:07 +0800)]
gitk: use <Button-3> for ctx menus on macOS with Tcl 8.7+
Commit d277e89f87fda01daa1e1a35fc1f7118678faa1f added special handling
on macOS (OS X) that makes button 2 the right mouse button. As per TIP
474 [1], Tcl 8.7 has swapped buttons 2 and 3 such that button 3 is made
the right mouse button as in other platforms. Therefore, the logic
should be updated to use button 3 on macOS with Tcl 8.7+.
Julia Evans [Sat, 23 Aug 2025 00:43:02 +0000 (00:43 +0000)]
doc: git-rebase: update discussion of internals
- make it clearer that we're talking about a multistep process
- give a more technically accurate description how rebase works with the
merge backend.
- condense the explanation of how git rebase skips commits with the same
textual changes into a single bullet point and remove the explanatory
diagram. Lots of things which are more complicated are already being
explained without a diagram.
- remove the explanation of how exactly `--fork-point` and `--root`
work since that information is in the OPTIONS section
- put all discussion of `ORIG_HEAD` inside the note
Signed-off-by: Julia Evans <julia@jvns.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Evans [Sat, 23 Aug 2025 00:43:01 +0000 (00:43 +0000)]
doc: git-rebase: move --onto explanation down
There's a very clear explanation with examples of using --onto which is
currently buried in the very long DESCRIPTION section. This moves it to
its own section, so that we can reference the explanation from the
`--onto` option by name.
Signed-off-by: Julia Evans <julia@jvns.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Evans [Sat, 23 Aug 2025 00:42:58 +0000 (00:42 +0000)]
doc: git-rebase: start with an example
- Start with an example that mirrors the example in the `git-merge` man
page, to make it easier for folks to understand the difference between
a rebase and a merge.
- Mention that rebase can combine or reorder commits
Signed-off-by: Julia Evans <julia@jvns.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various options to "git diff" that makes comparison ignore certain
aspects of the differences (like "space changes are ignored",
"differences in lines that match these regular expressions are
ignored") did not work well with "--name-only" and friends.
* ly/diff-name-only-with-diff-from-content:
diff: ensure consistent diff behavior with ignore options
Junio C Hamano [Fri, 22 Aug 2025 20:13:21 +0000 (13:13 -0700)]
Merge branch 'ac/deglobal-fmt-merge-log-config'
Code clean-up.
* ac/deglobal-fmt-merge-log-config:
builtin/fmt-merge-msg: stop depending on 'the_repository'
environment: remove the global variable 'merge_log_config'
Junio C Hamano [Fri, 22 Aug 2025 20:13:20 +0000 (13:13 -0700)]
Merge branch 'jc/diff-no-index-in-subdir'
"git diff --no-index" run inside a subdirectory under control of a
Git repository operated at the top of the working tree and stripped
the prefix from the output, and oddballs like "-" (stdin) did not
work correctly because of it. Correct the set-up by undoing what
the set-up sequence did to cwd and prefix.
* jc/diff-no-index-in-subdir:
diff: --no-index should ignore the worktree
Junio C Hamano [Fri, 22 Aug 2025 20:13:20 +0000 (13:13 -0700)]
Merge branch 'ms/refs-list'
The "list" subcommand of "git refs" acts as a front-end for
"git for-each-ref".
* ms/refs-list:
t: add test for git refs list subcommand
t6300: refactor tests to be shareable
builtin/refs: add list subcommand
builtin/for-each-ref: factor out core logic into a helper
builtin/for-each-ref: align usage string with the man page
doc: factor out common option
projects / thirdparty / git.git / log
