An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When decode_devicenotify_args() exits with no entries, we need to
ensure that the struct cb_devicenotifyargs is initialised to
{ 0, NULL } in order to avoid problems in
nfs4_callback_devicenotify().
When the bitmask of the attributes doesn't include the security label,
don't bother printing it. Since the label might not be null terminated,
adjust the printing format accordingly.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used. This is probably good and there is no
guarantee that it won't be freed before use.
Change to only report the 'mask' - as this is all that is used or needed.
The existing mail mechanism only supports writing of workload types.
However, mailbox command for RFIM (cmd = 0x08) also requires write
operation which is ignored. This results in failing to store RFI
restriction.
Fixint this requires enhancing mailbox writes for non workload
commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE
in mailbox write to allow this other write commands to be supoorted.
At the same time, however, we have to make sure that there is no
impact on read commands, by avoiding to write anything into the
mailbox data register.
To properly implement that, add two separate functions for mbox read
and write commands for the processor thermal workload command type.
This helps to distinguish the read and write workload command types
from each other while sending mbox commands.
32-bit processors cannot generally access 64-bit MMIO registers
atomically, and it is unknown in which order the two halves of
this registers would need to be read:
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c: In function 'send_mbox_cmd':
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c:79:37: error: implicit declaration of function 'readq'; did you mean 'readl'? [-Werror=implicit-function-declaration]
79 | *cmd_resp = readq((void __iomem *) (proc_priv->mmio_base + MBOX_OFFSET_DATA));
| ^~~~~
| readl
The driver already does not build for anything other than x86,
so limit it further to x86-64.
Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver resumes, the tcc offset is set back to its previous
value. But this only works if the value was user defined as otherwise
the offset isn't saved. This asymmetric logic is harder to maintain and
introduced some issues.
Improve the logic by saving the tcc offset in a suspend op, so the right
value is always restored after a resume.
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.
Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().
Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()") Cc: stable@vger.kernel.org # 4.8.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Cc: stable@vger.kernel.org Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.
Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()") Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.
Ziyang Xuan writes:
The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().
Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.
SD card is allowed to signal busy on DAT0 up to 1s after the
CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host
waits until busy of CMD49 is released and only then polls Power
Management Status register up to 1s until the card indicates ready to
power off.
Without waiting for busy before polling status register sometimes card
becomes unresponsive and system fails to suspend:
[ 205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command
[ 206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed
[ 206.421347] mmc0: error -110 reading status reg of PM func
[ 206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110
[ 206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110
[ 206.437064] PM: Some devices failed to suspend, or early wake event detected
Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.
Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.
Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.
Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.
Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.
Reported-by: Guo Zihua <guozihua@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Cc: stable@vger.kernel.org Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.
Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider") Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.
This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.
tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16. To
avert any risk of bit overflow, we add an extra sanity check for this in
that function. We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer. This potential problem was identified by Eric Dumazet.
This fixes CVE-2022-0435
Reported-by: Samuel Page <samuel.page@appgate.com> Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Samuel Page <samuel.page@appgate.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The soft dependency on cryptomgr is only needed in algapi because
if algapi isn't present then no algorithms can be loaded. This
also fixes the case where api is built-in but algapi is built as
a module as the soft dependency would otherwise get lost.
Fixes: 8ab23d547f65 ("crypto: api - Add softdep on cryptomgr") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cifs client set 4 to DataLength of create_posix context, which mean
Mode variable of create_posix context is only available. So buffer
validation of ksmbd should check only the size of Mode except for
the size of Reserved variable.
Fixes: 8f77150c15f8 ("ksmbd: add buffer validation for SMB2_CREATE_CONTEXT") Cc: stable@vger.kernel.org # v5.15+ Reported-by: Steve French <smfrench@gmail.com> Tested-by: Steve French <stfrench@microsoft.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refuse SIDA memops on guests which are not protected.
For normal guests, the secure instruction data address designation,
which determines the location we access, is not under control of KVM.
Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference.
Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Xin Xiong <xiongx18@fudan.edu.cn> Cc: Xin Tan <tanxin.ctf@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Yang Li <yang.lee@linux.alibaba.com> Cc: linux-mmc@vger.kernel.org Cc: stable <stable@vger.kernel.org> Reported-by: whitehat002 <hackyzh002@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.
On kernels without
commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:
cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)
On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irqn', so making 'irqn' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression
compared with zero: mpc8xxx_gc -> irqn < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 0b39536cc699 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'parent_irq', so making 'parent_irq' an int.
Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression
compared with zero: parent_irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 30fee1d7462a ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long <longman@redhat.com> Tested-by: Phil Auld <pauld@redhat.com> Reviewed-by: Phil Auld <pauld@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.
<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!
This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).
[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.
Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.
The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.
Kyle reported that rr[0] has started to malfunction on Comet Lake and
later CPUs due to EFI starting to make use of CPL3 [1] and the PMU
event filtering not distinguishing between regular CPL3 and SMM CPL3.
Since this is a privilege violation, default disable SMM visibility
where possible.
Administrators wanting to observe SMM cycles can easily change this
using the sysfs attribute while regular users don't have access to
this file.
[0] https://rr-project.org/
[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform"
at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the
end of page 5.
Reported-by: Kyle Huey <me@kylehuey.com> Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.
Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.
The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.
Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.
Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume <tristan@thume.ca> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.
Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.
Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state
(EQS) by calling guest_enter_irqoff(), and unmasked IRQs prior to
exiting the EQS by calling guest_exit(). As the IRQ entry code will not
wake RCU in this case, we may run the core IRQ code and IRQ handler
without RCU watching, leading to various potential problems.
Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.
This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_arm_enter_exit_vcpu() helper which is marked
noinstr.
Fixes: 1b3d546daf85ed2b ("arm/arm64: KVM: Properly account for guest CPU time") Reported-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org>
Message-Id: <20220201132926.3301912-3-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When transitioning to/from guest mode, it is necessary to inform
lockdep, tracing, and RCU in a specific order, similar to the
requirements for transitions to/from user mode. Additionally, it is
necessary to perform vtime accounting for a window around running the
guest, with RCU enabled, such that timer interrupts taken from the guest
can be accounted as guest time.
Most architectures don't handle all the necessary pieces, and a have a
number of common bugs, including unsafe usage of RCU during the window
between guest_enter() and guest_exit().
On x86, this was dealt with across commits:
87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs") 0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit") 9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit") 3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text") 135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text") 160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling") bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers")
... but those fixes are specific to x86, and as the resulting logic
(while correct) is split across generic helper functions and
x86-specific helper functions, it is difficult to see that the
entry/exit accounting is balanced.
This patch adds generic helpers which architectures can use to handle
guest entry/exit consistently and correctly. The guest_{enter,exit}()
helpers are split into guest_timing_{enter,exit}() to perform vtime
accounting, and guest_context_{enter,exit}() to perform the necessary
context tracking and RCU management. The existing guest_{enter,exit}()
heleprs are left as wrappers of these.
Atop this, new guest_state_enter_irqoff() and guest_state_exit_irqoff()
helpers are added to handle the ordering of lockdep, tracing, and RCU
manageent. These are inteneded to mirror exit_to_user_mode() and
enter_from_user_mode().
Subsequent patches will migrate architectures over to the new helpers,
following a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
This sequences handles all of the above correctly, and more clearly
balances the entry and exit portions, making it easier to understand.
The existing helpers are marked as deprecated, and will be removed once
all architectures have been converted.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <20220201132926.3301912-2-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.
$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00
Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte") Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Acked-by: Eric Wong <e@80x24.org> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:
make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'. Stop.
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'tail' and 'head' are 'unsigned int' type free-running count, when
'head' is overflow, the 'int i (= tail) < u32 head' will be false:
Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type
to compare, it can handle the overflow correctly.
typedef uint32_t u32;
int main()
{
u32 tail, head;
int stail, shead;
int i, loop;
tail = 0xffffffff;
head = 0x00000000;
for (i = tail, loop = 0; i < head; i++) {
unsigned int idx = i & 63;
printf("+ loop %d: idx = %u\n", loop++, idx);
}
stail = tail;
shead = head;
for (i = stail, loop = 0; i < shead; i++) {
unsigned int idx = i & 63;
printf("- loop %d: idx = %u\n", loop++, idx);
}
return 0;
}
Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
o The server has not recorded an unconfirmed { v, x, c, *, * } and
has recorded a confirmed { v, x, c, *, s }. If the principals of
the record and of SETCLIENTID_CONFIRM do not match, the server
returns NFS4ERR_CLID_INUSE without removing any relevant leased
client state, and without changing recorded callback and
callback_ident values for client { x }.
The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.
Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.
After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.
ASUS Chromebook C223 with Celeron N3350 crashes sometimes during
cold booot. Inspection of the kernel log showed that it gets into
an inifite loop logging the following message:
->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251
->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7
->action(): 00000
IRQ_NOPROBE set
unexpected IRQ trap at vector 7c
The issue happens during cold boot but only if cold boot happens
at most several dozen seconds after Chromebook is powered off. For
longer intervals between power off and power on (cold boot) the issue
does not reproduce. The unexpected interrupt is sourced from INT3452
GPIO pin which is used for SD card detect. Investigation relevealed
that when the interval between power off and power on (cold boot)
is less than several dozen seconds then values of INT3452 GPIO interrupt
enable and interrupt pending registers survive power off and power
on sequence and interrupt for SD card detect pin is enabled and pending
during probe of SD controller which causes the unexpected IRQ message.
"Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc
mentions that GPIO interrupt enable and status registers default
value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending
registers in its probe function.
The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.
When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.
This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.
Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Grace Kao <grace.kao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two bugs have sneaked in the H616 pinctrl data:
- PH9 uses the mux value of 0x3 twice (one should be 0x5 instead)
- PH8 and PH9 use the "i2s3" function name twice in each pin
For the double pin name we use the same trick we pulled for i2s0: append
the pin function to the group name to designate the special function.
Fixes: 25adc29407fb ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller") Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220105172952.23347-1-andre.przywara@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and wcd938x_set_compander
currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
For some reason we ended up with incorrect register offfset calcuations
for sidetone. regmap clearly throw errors when accessing these incorrect
registers as these do not belong to any read/write ranges.
so fix them to point to correct register offsets.
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put()
Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220119123101.GA9509@kili Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.
Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.
Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.
Fixes: f107294c6422 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:
"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.
Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.
When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.
To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."
Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver") Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.
Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch detected a divide by zero bug in check_overlay_scaling().
drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_height'.
drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
error: potential divide by zero bug '/ rec->dst_width'.
Prevent this by ensuring that the dst height and width are non-zero.
Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.
Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two issues with runtime pm handling in stmmac_dvr_remove():
1. the mac is runtime suspended before stopping dma and rx/tx. We
need to ensure the device is properly resumed back.
2. the stmmaceth clk enable/disable isn't balanced in both exit and
error handling code path. Take the exit code path for example, when we
unbind the driver or rmmod the driver module, the mac is runtime
suspended as said above, so the stmmaceth clk is disabled, but
stmmac_dvr_remove()
stmmac_remove_config_dt()
clk_disable_unprepare()
CCF will complain this time. The error handling code path suffers
from the similar situtaion.
Here are kernel warnings in error handling code path on Allwinner D1
platform:
Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries.
Fixes: 2153bd1e3d3d ("net/smc: Transfer remaining wait queue entries during fallback") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to commit fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff
creation helpers"), nft_reject_bridge did not assign to nskb->dev before
passing nskb on to br_forward(). The shared skbuff creation helpers
introduced in above commit do which seems to confuse br_forward() as
reject statements in prerouting hook won't emit a packet anymore.
Fix this by simply passing NULL instead of 'dev' to the helpers - they
use the pointer for just that assignment, nothing else.
These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.
Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel] Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 7345201c3963 ("IB/cm: Improve the calling of cm_init_av_for_lap and cm_init_av_by_path") Link: https://lore.kernel.org/r/7615f23bbb5c5b66d03f6fa13e1c99d51dae6916.1642581448.git.leonro@nvidia.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue happens in several error paths in uniphier_spi_probe().
When either dma_get_slave_caps() or devm_spi_register_master() returns
an error code, the function forgets to decrease the refcount of both
`dma_rx` and `dma_tx` objects, which may lead to refcount leaks.
Fix it by decrementing the reference count of specific objects in
those error paths.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Fixes: 28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support") Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This check misses checking for platform_get_irq()'s call and may passes
the negative error codes to devm_request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling devm_request_irq() with invalid IRQ #s.
Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
