ramana [Fri, 9 Oct 2015 10:58:06 +0000 (10:58 +0000)]
[AArch64] Handle literal pools for functions > 1 MiB in size.
This patch fixes the issue in PR63304 where we have
functions that are > 1MiB. The idea is to use adrp / ldr or adrp / add
instructions to address the literal pools under the use of a command line
option. I would like to turn this on by default on trunk but keep this
disabled by default for the release branches in order to get some
serious testing for this feature while it bakes on trunk.
As a follow-up I would like to try and see if estimate_num_insns or
something else can give us a heuristic to turn this on for "large" functions.
After all the number of incidences of this are quite low in real life,
so may be we should look to restrict this use as much as possible on the
grounds that this code generation implies an extra integer register for
addressing for every floating point and vector constant and I don't think
that's great in code that already may have high register pressure.
Tested on aarch64-none-elf with no regressions. A previous
version was bootstrapped and regression tested.
This adds movmisalignhi and movmisalignsi expanders when unaligned
access is allowed by the architecture. This allows the mid-end
to expand to misaligned loads and stored.
Compared code generated for the Linux kernel and
it changes code generation for a handful of files all for the better
basically by reducing the stack usage.
Tested by :
1. armhf bootstrap and regression test - no regressions.
2.. arm-none-eabi cross build and regression test for
hjl [Thu, 8 Oct 2015 18:57:11 +0000 (18:57 +0000)]
Round up the SSE register save area only if needed
There is is no point to round up the SSE register save area to 16 bytes if
the incoming stack boundary is less than 16 bytes.
* config/i386/i386.c (ix86_compute_frame_layout): Round up the
SSE register save area to 16 bytes only if the incoming stack
boundary is no less than 16 bytes.
nathan [Thu, 8 Oct 2015 17:31:36 +0000 (17:31 +0000)]
* config/nvptx/nvptx.h (struct machine_function): Add comment.
* config/nvptx/nvptx.c (nvptx_declare_function_name): Functions
may return pointer as well as in memory.
(nvptx_output_return): Likewise.
rsandifo [Thu, 8 Oct 2015 16:49:24 +0000 (16:49 +0000)]
Make tree_expr_nonnegative_warnv_p recurse into SSA names
The upcoming patch to move sqrt and cbrt simplifications to match.pd
caused a regression because the (abs @0)->@0 simplification didn't
trigger for:
(abs (convert (abs X)))
The simplification is based on tree_expr_nonnegative_p, which at
the moment just gives up if it sees an SSA_NAME.
This patch makes tree_expr_nonnegative_p recurse into SSA name
definitions, but limits the depth of recursion to a small number
for the reason mentioned in the comment (adapted from an existing
comment in gimple_val_nonnegative_real_p). The patch reuses code
in tree-vrp.c, moving it to gimple-fold.c. It also replaces calls
to gimple_val_nonnegative_real_p with calls to tree_expr_nonnegative_p.
A knock-on effect is that we can now prove _i_589 < 0 is false in
sequences like:
This defeats an assert in tree-vrp.c that ASSERT_EXPR conditions
are never known to be false. Previously the assert only ever used
local knowledge and so would be limited to cases like x != x for
integer x. Now that we use global knowledge it's possible to prove
the assertion condition is false in blocks that are in practice
unreachable. The patch therefore removes the assert.
Bootstrapped & regression-tested on x86_64-linux-gnu. I didn't write
a specific test because this is already covered by the testsuite if
the follow-on patch is also applied.
gcc/
* params.def (PARAM_MAX_SSA_NAME_QUERY_DEPTH): New param.
* doc/invoke.texi (--param max-ssa-name-query-depth): Document.
* fold-const.h (tree_unary_nonnegative_warnv_p)
(tree_single_nonnegative_warnv_p, tree_call_nonnegative_warnv_p)
(tree_expr_nonnegative_warnv_p): Add depth parameters.
* fold-const.c: Include gimple-fold.h and params.h.
(tree_ssa_name_nonnegative_warnv_p): New function.
(tree_unary_nonnegative_warnv_p, tree_binary_nonnegative_warnv_p)
(tree_single_nonnegative_warnv_p, tree_call_nonnegative_warnv_p)
(tree_invalid_nonnegative_warnv_p, tree_expr_nonnegative_warnv_p):
Add a depth parameter and increment it for recursive calls to
tree_expr_nonnegative_warnv_p. Use tree_ssa_name_nonnegative_warnv_p
to handle SSA names.
* gimple-fold.h (gimple_val_nonnegative_real_p): Delete.
(gimple_stmt_nonnegative_warnv_p): Declare.
* tree-vrp.c (remove_range_assertions): Remove assert that condition
cannot be proven false.
(gimple_assign_nonnegative_warnv_p, gimple_call_nonnegative_warnv_p)
(gimple_stmt_nonnegative_warnv_p): Move to...
* gimple-fold.c: ...here. Add depth parameters and pass them
down to the tree routines. Accept statements that aren't
assignments or calls but just return false for them.
(gimple_val_nonnegative_real_p): Delete.
* tree-ssa-math-opts.c (gimple_expand_builtin_pow): Use
tree_expr_nonnegative_p instead of gimple_val_nonnegative_real_p.
Check HONOR_NANs first.
ienkovich [Thu, 8 Oct 2015 13:14:09 +0000 (13:14 +0000)]
gcc/
* tree-ssa-loop-unswitch.c: Include "gimple-iterator.h" and
"cfghooks.h", add prototypes for introduced new functions.
(tree_ssa_unswitch_loops): Use from innermost loop iterator, move all
checks on ability of loop unswitching to tree_unswitch_single_loop;
invoke tree_unswitch_single_loop or tree_unswitch_outer_loop depending
on innermost loop check.
(tree_unswitch_single_loop): Add all required checks on ability of
loop unswitching under zero recursive level guard.
(tree_unswitch_outer_loop): New function.
(find_loop_guard): Likewise.
(empty_bb_without_guard_p): Likewise.
(used_outside_loop_p): Likewise.
(get_vop_from_header): Likewise.
(hoist_guard): Likewise.
(check_exit_phi): Likewise.
gcc/testsuite/
* gcc.dg/loop-unswitch-2.c: New test.
* gcc.dg/loop-unswitch-3.c: Likewise.
* gcc.dg/loop-unswitch-4.c: Likewise.
hubicka [Wed, 7 Oct 2015 22:54:35 +0000 (22:54 +0000)]
* expr.c (store_expr_with_bounds): Handle aggregate moves from
BLKmode.
* gimple-expr.c (useless_type_conversion_p): Do not use TYPE_CANONICAL
to define gimple type system; compare aggregates only by size.
law [Wed, 7 Oct 2015 21:56:18 +0000 (21:56 +0000)]
Re: [PATCH] Improve DOM's optimization of control statements
* tree-ssa-dom.c (optimize_stmt): Don't set LOOPS_NEED_FIXUP here.
* tree-ssa-threadupdate.c (remove_ctrl_stmt_and_useless_edges): Do it
here instead. Tighten test to avoid setting LOOPS_NEED_FIXUP
unnecessarily.
spop [Wed, 7 Oct 2015 19:25:35 +0000 (19:25 +0000)]
gather bbs and conditions in a single walk through dominators
Clean up the function to build scop's basic blocks and the function
that gathers the conditions under which a basic block is executed. We remove
one traversal of the dominator tree.
This refactoring was triggered by the need of a vec<bb> of all the basic blocks
in a region. We will use that vector in a patch that removes the out-of-ssa
translation of scalar dependences: we will iterate through the basic blocks of a
region to record scalar dependences crossing bbs or going out of the region.
The patch passes bootstrap and regtest on x86_64-linux.
2015-10-06 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
* graphite-dependences.c (scop_get_dependences): Do not use SCOP_BBS.
* graphite-isl-ast-to-gimple.c (get_max_schedule_dimensions): Same.
(generate_isl_schedule): Same.
* graphite-optimize-isl.c (scop_get_domains): Same.
(apply_schedule_map_to_scop): Same.
* graphite-poly.c (print_iteration_domains): Same.
(remove_gbbs_in_scop): Same.
(new_scop): Same.
(free_scop): Same.
(print_scop): Same.
* graphite-poly.h (struct scop): Rename bbs to pbbs.
(SCOP_BBS): Remove.
* graphite-scop-detection.c (compare_bb_depths): Remove.
(graphite_sort_dominated_info): Remove.
(try_generate_gimple_bb): Move out of scop_detection.
(all_non_dominated_preds_marked_p): Remove.
(build_scop_bbs_1): Remove.
(build_scop_bbs): Remove.
(nb_pbbs_in_loops): Do not use SCOP_BBS.
(find_scop_parameters): Same.
(sese_dom_walker): Rename gather_bbs.
(before_dom_children): Call try_generate_gimple_bb and collect gbb
and pbb.
(build_scops): Call gather_bbs.
* graphite-sese-to-poly.c (build_scop_scattering): Do not use SCOP_BBS.
(add_conditions_to_constraints): Same.
(build_scop_iteration_domain): Same.
(build_scop_drs): Same.
(new_pbb_from_pbb): Same.
* sese.c (new_sese_info): Create bbs.
* sese.h (struct sese_info_t): Add bbs.
uros [Wed, 7 Oct 2015 17:42:09 +0000 (17:42 +0000)]
PR target/66697
* config/i386/i386.c (ix86_option_override_internal): Always use
8-byte minimum stack boundary in 64-bit mode.
(ix86_compute_frame_layout): Remove assert on INCOMING_STACK_BOUNDARY.
(ix86_emit_save_reg_using_mov): Support unaligned SSE store.
Add a REG_CFA_EXPRESSION note if needed.
(ix86_emit_restore_sse_regs_using_mov): Support unaligned SSE load.
(ix86_handle_force_align_arg_pointer_attribute): New.
(ix86_minimum_incoming_stack_boundary): Remove TARGET_64BIT check.
(ix86_attribute_table): Set ix86_force_align_arg_pointer_string
with ix86_handle_force_align_arg_pointer_attribute.
* config/i386/i386.h (MIN_STACK_BOUNDARY): Set to BITS_PER_WORD.
testsuite/ChangeLog:
PR target/66697
* gcc.target/i386/20060512-1.c: Remove ia32 requirement.
(PUSH, POP): New defines.
(sse2_test): Use PUSH and POP to misalign runtime stack.
* gcc.target/i386/20060512-2.c: Remove ia32 requirement.
hjl [Wed, 7 Oct 2015 10:30:12 +0000 (10:30 +0000)]
Merge ix86_maybe_switch_abi with ix86_set_current_function
ix86_maybe_switch_abi is called to late during RTL expansion and we
use the stale information from compilation of the previous function.
aggregate_value_p uses call_used_regs. aggregate_value_p is used by
IPA and return value optimization, which are called before
ix86_maybe_switch_abi is called. This patch merges ix86_maybe_switch_abi
with ix86_set_current_function.
rguenth [Wed, 7 Oct 2015 09:04:48 +0000 (09:04 +0000)]
2015-10-07 Richard Biener <rguenther@suse.de>
* tree-vectorizer.h (stmt_vec_info_vec): Use vec<stmt_vec_info>.
(vinfo_for_stmt): Adjust.
(set_vinfo_for_stmt): Likewise.
* tree-vectorizer.c (stmt_vec_info_vec): Likewise.
* tree-vect-stmts.c (free_stmt_vec_info_vec): Likewise.
* tree-vect-loop.c (new_loop_vec_info): Remove special-casing
of inner loop.
(vect_analyze_loop_1): Remove.
(vect_analyze_loop_form_1): Avoid building a loop_vec_info for
inner loop when vectorizing an outer loop by splitting out from ...
(vect_analyze_loop_form): ... here.
rsandifo [Wed, 7 Oct 2015 08:09:45 +0000 (08:09 +0000)]
Cache reals for 1/4, 1/6 and 1/9
We have a global 1/2 and a cached 1/3, but recalculate 1/4, 1/6 and 1/9
each time we need them. That seems a bit arbitrary and makes the folding
code more noisy (especially once it's moved to match.pd).
This patch caches the other three constants too. Bootstrapped &
regression-tested on x86_64-linux-gnu.
gcc/
* real.h (dconst_quarter, dconst_sixth, dconst_ninth): New macros.
(dconst_quarter_ptr, dconst_sixth_ptr, dconst_ninth_ptr): Declare.
* real.c (CACHED_FRACTION): New helper macro.
(dconst_third_ptr): Use it.
(dconst_quarter_ptr, dconst_sixth_ptr, dconst_ninth_ptr): New.
* builtins.c (fold_builtin_sqrt): Use dconst_quarter and
dconst_sixth.
(fold_builtin_cbrt): Use dconst_sixth and dconst_ninth.
law [Wed, 7 Oct 2015 02:25:57 +0000 (02:25 +0000)]
[PATCH][PR tree-optimization/67816] Fix jump threading when DOM removes conditionals in jump threading path
PR tree-optimization/67816
* tree-ssa-threadupdate.h (remove_jump_threads_including): Renamed
from remove_jump_threads_starting_at. Accept an edge rather than
a basic block.
* tree-ssa-threadupdate.c (removed_edges): New hash table.
(remove_jump_threads_including): Note edges that get removed from
the CFG for later pruning of jump threading paths including them.
(thread_through_all_blocks): Remove paths which include edges that
have been removed.
* tree-ssa-dom.c (optimize_stmt): Call remove_jump_threads_including
on each outgoing edges when optimizing away a control statement.
jason [Wed, 7 Oct 2015 01:46:54 +0000 (01:46 +0000)]
PR c++/67810
* parser.c (cp_parser_fold_expr_p): Remove.
(is_binary_op): New.
(cp_parser_fold_expression): Take LHS as parameter.
(cp_parser_primary_expression): Call it after parsing an expression.
(cp_parser_binary_expression, cp_parser_assignment_operator_opt)
(cp_parser_expression): Ignore an operator followed by '...'.
(is_binary_op): New.
* pt.c (tsubst_unary_left_fold, tsubst_binary_left_fold)
(tsubst_unary_right_fold, tsubst_binary_right_fold): Handle errors.
lkrupp [Tue, 6 Oct 2015 23:47:18 +0000 (23:47 +0000)]
2015-10-06 Louis Krupp <louis.krupp@zoho.com>
PR fortran/65766
* resolve.c (gfc_resolve_substring_charlen): For derived type,
use typespec of string component when resolving substring length.
ian [Tue, 6 Oct 2015 21:24:17 +0000 (21:24 +0000)]
compiler: Record each import as a distinct alias.
This patch introduces the Package_alias class which is a
finer representation of the different between a package and the
aliases it is imported under. Each alias keeps track of the location
of its import statement and how many times that alias has been used.
This allows the gofrontend to report when a specific import has not
been used even if a symbol from the package has been used by another
import.
gcc/
* config/nios2/nios2.c (nios2_symbol_ref_in_small_data_p):
For -mgpopt=local, also exclude unintialized common symbols.
* doc/invoke.texi (Nios II Options): Document the change.
meissner [Tue, 6 Oct 2015 17:20:49 +0000 (17:20 +0000)]
[gcc]
2015-10-05 Michael Meissner <meissner@linux.vnet.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
PR target/67808
* config/rs6000/rs6000.md (extenddftf2): In the expander, only
allow registers, but provide insns for the combiner to create for
loads from memory. Separate VSX code from non-VSX code. For
non-VSX code, combine extenddftf2_fprs into extenddftf2 and rename
externaldftf2_internal to externaldftf2_fprs. Reorder constraints
so that registers come before memory operations. Drop support from
converting DFmode to TFmode, if the DFmode value is in a GPR
register.
(extenddftf2_fprs): Likewise.
(extenddftf2_internal): Likewise.
(extenddftf2_vsx): Likewise.
(extendsftf2): In the expander, only allow registers, but provide
insns for the combiner to create for stores and loads.
[gcc/testsuite]
2015-10-05 Michael Meissner <meissner@linux.vnet.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
PR target/67808
* gcc.target/powerpc/pr67808.c: New test.
nickc [Tue, 6 Oct 2015 16:26:22 +0000 (16:26 +0000)]
gcc * config/msp430/msp430.c (ATTR_NOINIT): New constant.
(ATTR_PERSIST): New constant.
(msp430_data_attr): New function - verifies an attribute that only
applies to variables.
(msp430_attributes): Add noinit and persistent attributes.
(noinit_section): New variable.
(presis_section): New variable.
(TARGET_ASM_INIT_SECTIONS): Define.
(msp430_init_sections): New function - initialises the noinit and
persist section variables.
(msp430_select_section): Add support for noinit and persist
attributes.
(msp430_section_type_flags): Likewise.
* doc/extend.texi: Document the reent, critical, wakeup, noinit
and persistent attributes.
tests * gcc.target/msp430: New directory.
* gcc.target/msp430/msp430.exp: New file. Runs MSP430 specific
tests.
* gcc.target/msp430/data-attributes.c: New file. Checks the
noinit and persistent data attributes.
spop [Tue, 6 Oct 2015 15:56:09 +0000 (15:56 +0000)]
Early exit to avoid redundant computations
Analyze only those bbs which are outside the region for uses which might be
defined inside the region. This is intended to improve the compile time. This
algorithm may be further improved by only looking at the successors of region as
these regions are sese. Added FIXMEs to make this improvement in future.
Passes regtest and bootstrap on x86_64.
gcc/ChangeLog:
2015-10-05 Aditya Kumar <hiraditya@msn.com>
* graphite-sese-to-poly.c (build_loop_iteration_domains): Only loops
which are in this region are passed so gcc_assert and remove redundant
computation.
* sese.c (sese_build_liveouts): Pass only those bbs which are not in region.
(sese_bad_liveouts_use): Only BBs which are not in region are passed so
gcc_assert on that and remove unnecessary computation.
(sese_build_liveouts_use): Same.
spop [Tue, 6 Oct 2015 15:56:03 +0000 (15:56 +0000)]
Move declarations, assign types, renaming.
1. Move declarations near the assignment/usage.
2. Assign type to members which were void*.
3. Rename scop->context to scop::param_context, and scop::ctx to
scop::isl_context
No functional changes intended. Passes regtest and bootstrap.
gcc/ChangeLog:
2015-10-05 Aditya Kumar <aditya.k7@samsung.com>
* graphite-dependences.c (scop_get_reads): Renamed scop->context to scop->param_context.
(scop_get_must_writes): Same.
(scop_get_may_writes): Same.
(scop_get_original_schedule): Same.
(scop_get_transformed_schedule): Same.
(subtract_commutative_associative_deps): Same.
* graphite-isl-ast-to-gimple.c (add_parameters_to_ivs_params): Same.
(generate_isl_context): Same.
(generate_isl_schedule): Same.
(scop_to_isl_ast): Same.
(graphite_regenerate_ast_isl): Same.
* graphite-optimize-isl.c (scop_get_domains): Same.
(optimize_isl): Renamed scop->context to scop->param_context.
* graphite-poly.c (new_poly_bb): Change the type of argument to gimple_poly_bb_p.
(new_scop): Renamed scop->context to scop->param_context.
(free_scop): Same.
(print_scop_context): Same.
* graphite-poly.h (new_poly_dr): Change the type of argument from void* to data_reference_p.
(struct poly_bb): Change the type of black_box to gimple_poly_bb_p.
(new_poly_bb): Change the type of argument from void* to gimple_poly_bb_p.
(pbb_set_black_box): Same.
(struct scop): Rename context to param_context, ctx to isl_context.
* graphite-scop-detection.c (scop_detection::build_scop_bbs_1): Move declarations closer to assignment.
(find_params_in_bb): Same.
(find_scop_parameters): Same.
* graphite-sese-to-poly.c (unsigned ssa_name_version_typesize): Global to be used for statement IDs.
(isl_id_for_pbb): Use ssa_name_version_typesize.
(simple_copy_phi_p): Move declarations closer to assignment.
(build_pbb_scattering_polyhedrons): Same.
(build_scop_scattering): Same.
(isl_id_for_ssa_name): Same.
(extract_affine_name): Same.
(extract_affine_int): Same.
(extract_affine): Same.
(set_scop_parameter_dim): Use renamed member.
(build_loop_iteration_domains): Same.
(add_param_constraints): Same.
(build_scop_iteration_domain): Same.
(pdr_add_data_dimensions): Same.
(build_poly_dr): Same.
(build_scop_drs): Move declarations closer to assignment.
(analyze_drs_in_stmts): Same.
(insert_out_of_ssa_copy): Same.
(insert_out_of_ssa_copy_on_edge): Same.
(propagate_expr_outside_region): Same.
(rewrite_phi_out_of_ssa): Same.
(rewrite_degenerate_phi): Same.
(rewrite_reductions_out_of_ssa): Same.
(rewrite_cross_bb_scalar_dependence): Same.
(handle_scalar_deps_crossing_scop_limits): Same.
(rewrite_cross_bb_scalar_deps): Same.
* graphite.c (graphite_transform_loops): Use renamed member.
kyukhin [Tue, 6 Oct 2015 13:49:30 +0000 (13:49 +0000)]
AVX-512. Avoid upper-bank registers when splitting vec_extract_lo instruction.
gcc/
PR target/67849
* config/i386/sse.md (define_split vec_select/V8FI): Restrict
split for upper-bank registers when target does not support
AVX512VL.
(define_insn "vec_extract_lo_<mode><mask_name>"): Restrict
split when target does not support AVX512VL.
redi [Tue, 6 Oct 2015 10:27:57 +0000 (10:27 +0000)]
Update template instantiation documentation
* doc/extend.texi (Template Instantiation): Reorder options and
de-emphasize -frepo.
* doc/invoke.texi (C++ Dialect Options): Use -fstrict-enums in
example instead of -frepo.
paolo [Mon, 5 Oct 2015 21:43:26 +0000 (21:43 +0000)]
/cp
2015-10-05 Paolo Carlini <paolo.carlini@oracle.com>
PR c++/53856
* pt.c (check_default_tmpl_args): Per [temp.param]/9, do not
reject default template arguments in out of class definitions
of members of non-template classes.
/testsuite
2015-10-05 Paolo Carlini <paolo.carlini@oracle.com>
jamborm [Mon, 5 Oct 2015 15:55:54 +0000 (15:55 +0000)]
IPA-CP Alignment lattice cleanup
2015-10-05 Martin Jambor <mjambor@suse.cz>
Jan Hubicka <hubicka@ucw.cz>
* ipa-cp.c (ipcp_alignment_lattice): New type.
(ipcp_param_lattices): Use the above to represent alignment.
(ipcp_alignment_lattice::print): New function.
(print_all_lattices): Use it to print alignment information.
(ipcp_alignment_lattice::top_p): New function.
(ipcp_alignment_lattice::bottom_p): Likewise.
(ipcp_alignment_lattice::set_to_bottom): Likewise.
(ipcp_alignment_lattice::meet_with_1): Likewise.
(ipcp_alignment_lattice::meet_with): Two new overloaded functions.
(set_all_contains_variable): Use set_to_bottom of alignment lattice.
(initialize_node_lattices): Likewise.
(propagate_alignment_accross_jump_function): Work with the new class
for alignment lattices.
(propagate_constants_accross_call): Pass only the alignment lattice to
propagate_alignment_accross_jump_function.
(ipcp_store_alignment_results): Work with the new class for alignment
lattices.
testsuite/
* gcc.dg/ipa/propalign-4.c: New test.
* gcc.dg/ipa/propalign-5.c: Likewise.
projects / thirdparty / gcc.git / log
