In the old days, TLB handling for 8xx was using tlbie and tlbia
instructions directly as much as possible.
But commit f048aace29e0 ("powerpc/mm: Add SMP support to no-hash
TLB handling") broke that by introducing out-of-line unnecessary
complex functions for booke/smp which don't have tlbie/tlbia
instructions and require more complex handling.
Restore direct use of tlbie and tlbia for 8xx which is never SMP.
powerpc/lib/sstep: Don't use __{get/put}_user() on kernel addresses
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() and put_user() are granting userspace access and
are exclusively for userspace access.
Convert single step emulation functions to user_access_begin() and
friends and use unsafe_get_user() and unsafe_put_user().
When addressing kernel addresses, there is no need to open userspace
access. And for book3s/32 it is particularly important to no try and
open userspace access on kernel address, because that would break the
content of kernel space segment registers. No guard has been put
against that risk in order to avoid degrading performance.
copy_from_kernel_nofault() and copy_to_kernel_nofault() should
be used but they are out-of-line functions which would degrade
performance. Those two functions are making use of
__get_kernel_nofault() and __put_kernel_nofault() macros.
Those two macros are just wrappers behind __get_user_size_goto() and
__put_user_size_goto().
unsafe_get_user() and unsafe_put_user() are also wrappers of
__get_user_size_goto() and __put_user_size_goto(). Use them to
access kernel space. That allows refactoring userspace and
kernelspace access.
powerpc: warn on emulation of dcbz instruction in kernel mode
dcbz instruction shouldn't be used on non-cached memory. Using
it on non-cached memory can result in alignment exception and
implies a heavy handling.
Instead of silentely emulating the instruction and resulting in high
performance degradation, warn whenever an alignment exception is
taken in kernel mode due to dcbz, so that the user is made aware that
dcbz instruction has been used unexpectedly by the kernel.
powerpc/32: Add support for out-of-line static calls
Add support for out-of-line static calls on PPC32. This change
improve performance of calls to global function pointers by
using direct calls instead of indirect calls.
The trampoline is initialy populated with a 'blr' or branch to target,
followed by an unreachable long jump sequence.
In order to cater with parallele execution, the trampoline needs to
be updated in a way that ensures it remains consistent at all time.
This means we can't use the traditional lis/addi to load r12 with
the target address, otherwise there would be a window during which
the first instruction contains the upper part of the new target
address while the second instruction still contains the lower part of
the old target address. To avoid that the target address is stored
just after the 'bctr' and loaded from there with a single instruction.
Then, depending on the target distance, arch_static_call_transform()
will either replace the first instruction by a direct 'bl <target>' or
'nop' in order to have the trampoline fall through the long jump
sequence.
For the special case of __static_call_return0(), to avoid the risk of
a far branch, a version of it is inlined at the end of the trampoline.
Performancewise the long jump sequence is probably not better than
the indirect calls set by GCC when we don't use static calls, but
such calls are unlikely to be required on powerpc32: With most
configurations the kernel size is far below 32 Mbytes so only
modules may happen to be too far. And even modules are likely to
be close enough as they are allocated below the kernel core and
as close as possible of the kernel text.
static_call selftest is running successfully with this change.
With this patch, __do_irq() has the following sequence to trace
irq entries:
Christophe Leroy [Tue, 31 Aug 2021 08:30:24 +0000 (08:30 +0000)]
powerpc/machdep: Remove stale functions from ppc_md structure
ppc_md.iommu_save() is not set anymore by any platform after
commit c40785ad305b ("powerpc/dart: Use a cachable DART").
So iommu_save() has become a nop and can be removed.
ppc_md.show_percpuinfo() is not set anymore by any platform after
commit 4350147a816b ("[PATCH] ppc64: SMU based macs cpufreq support").
Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were
removed by commit 0f03a43b8f0f ("[POWERPC] Remove todc code from
ARCH=powerpc")
Last user of kgdb_map_scc() was removed by commit 17ce452f7ea3 ("kgdb,
powerpc: arch specific powerpc kgdb support").
ppc.machine_kexec_prepare() has not been used since
commit 8ee3e0d69623 ("powerpc: Remove the main legacy iSerie platform
code"). This allows the removal of machine_kexec_prepare() and the
rename of default_machine_kexec_prepare() into machine_kexec_prepare()
Commit d75d68cfef49 ("powerpc: Clean up obsolete code relating to
decrementer and timebase") made generic_suspend_enable_irqs() and
generic_suspend_disable_irqs() static.
Christophe Leroy [Tue, 24 Aug 2021 13:36:13 +0000 (13:36 +0000)]
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
Commit e65e1fc2d24b ("[PATCH] syscall class hookup for all normal
targets") added generic support for AUDIT but that didn't include
support for bi-arch like powerpc.
Commit 4b58841149dc ("audit: Add generic compat syscall support")
added generic support for bi-arch.
Convert powerpc to that bi-arch generic audit support.
Christophe Leroy [Mon, 23 Aug 2021 15:29:12 +0000 (15:29 +0000)]
powerpc/32: Don't use lmw/stmw for saving/restoring non volatile regs
Instructions lmw/stmw are interesting for functions that are rarely
used and not in the cache, because only one instruction is to be
copied into the instruction cache instead of 19. However those
instruction are less performant than 19x raw lwz/stw as they require
synchronisation plus one additional cycle.
SAVE_NVGPRS / REST_NVGPRS are used in only a few places which are
mostly in interrupts entries/exits and in task switch so they are
likely already in the cache.
Using standard lwz improves null_syscall selftest by:
- 10 cycles on mpc832x.
- 2 cycles on mpc8xx.
Christophe Leroy [Fri, 15 Oct 2021 10:02:42 +0000 (12:02 +0200)]
powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE
fsl_booke and 44x are not able to map kernel linear memory with
pages, so they can't support DEBUG_PAGEALLOC and KFENCE, and
STRICT_KERNEL_RWX is also a problem for now.
Enable those only on book3s (both 32 and 64 except KFENCE), 8xx and 40x.
Wan Jiabing [Mon, 18 Oct 2021 01:54:16 +0000 (21:54 -0400)]
powerpc/kexec_file: Add of_node_put() before goto
Fix following coccicheck warning:
./arch/powerpc/kexec/file_load_64.c:698:1-22: WARNING: Function
for_each_node_by_type should have of_node_put() before goto
Early exits from for_each_node_by_type should decrement the
node reference counter.
Joel Stanley [Wed, 13 Oct 2021 21:34:38 +0000 (08:04 +1030)]
powerpc/s64: Clarify that radix lacks DEBUG_PAGEALLOC
The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.
As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.
There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.
Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au
Christophe Leroy [Wed, 13 Oct 2021 14:43:54 +0000 (16:43 +0200)]
powerpc: Mark .opd section read-only
.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.
To avoid that, move .opd section inside read-only memory.
Athira Rajeev [Thu, 7 Oct 2021 07:51:21 +0000 (13:21 +0530)]
powerpc/perf: Fix cycles/instructions as PM_CYC/PM_INST_CMPL in power10
On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.
Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.
To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com
Kai Song [Sat, 9 Oct 2021 04:16:30 +0000 (12:16 +0800)]
powerpc/eeh: Fix docstrings in eeh.c
We fix the following warnings when building kernel with W=1:
arch/powerpc/kernel/eeh.c:598: warning: Function parameter or member 'function' not described in 'eeh_pci_enable'
arch/powerpc/kernel/eeh.c:774: warning: Function parameter or member 'edev' not described in 'eeh_set_dev_freset'
arch/powerpc/kernel/eeh.c:774: warning: expecting prototype for eeh_set_pe_freset(). Prototype was for eeh_set_dev_freset() instead
arch/powerpc/kernel/eeh.c:814: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset_full'
arch/powerpc/kernel/eeh.c:944: warning: Function parameter or member 'ops' not described in 'eeh_init'
arch/powerpc/kernel/eeh.c:1451: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset'
arch/powerpc/kernel/eeh.c:1526: warning: Function parameter or member 'func' not described in 'eeh_pe_inject_err'
arch/powerpc/kernel/eeh.c:1526: warning: Excess function parameter 'function' described in 'eeh_pe_inject_err'
Cédric Le Goater [Mon, 11 Oct 2021 07:03:56 +0000 (09:03 +0200)]
powerpc/boot: Use CONFIG_PPC_POWERNV to compile OPAL support
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is
used to compile support for other platforms such as Microwatt. There
is no need for OPAL calls on these.
Christophe Leroy [Tue, 12 Oct 2021 10:40:37 +0000 (12:40 +0200)]
powerpc: Set max_mapnr correctly
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Athira Rajeev [Thu, 7 Oct 2021 06:55:04 +0000 (12:25 +0530)]
powerpc/perf: Expose instruction and data address registers as part of extended regs
Patch adds support to include Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers. Update the definition of PERF_REG_PMU_MASK_300/31 and
PERF_REG_EXTENDED_MAX to include these SPR's.
Athira Rajeev [Thu, 7 Oct 2021 06:55:02 +0000 (12:25 +0530)]
powerpc/perf: Refactor the code definition of perf reg extended mask
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask
value for extended registers. Current definition of these mask values
uses hex constant and does not use registers by name, making it less
readable. Patch refactor the macro values by or'ing together the actual
register value constants. Also include PERF_REG_EXTENDED_MAX as
part of enum definition.
powerpc/pseries/cpuhp: remove obsolete comment from pseries_cpu_die
This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.
The core DLPAR code supports two actions (add and remove) and three
subtypes of action:
* By DRC index: the action is attempted on a single specified resource.
This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
beginning at the specified index. This is implemented only by the memory
DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
specified number of resources to which the action can be applied.
I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:
$ ppc64_cpu --smt ; nproc
SMT=8
24
$ printf "cpu remove count 2" > /sys/kernel/dlpar
$ nproc
8
$ printf "cpu add count 2" > /sys/kernel/dlpar
-bash: printf: write error: Invalid argument
$ dmesg | tail -2
pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
dlpar: Could not handle DLPAR request "cpu add count 2"
$ nproc
8
$ drmgr -c cpu -a -q 2 # this uses the by-index method
Validating CPU DLPAR capability...yes.
CPU 1
CPU 17
$ nproc
24
This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.
This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.
Summary:
* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
difficult to test.
So let's remove it.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality") Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality") Fixes: b015f6bc9547 ("powerpc/pseries: Add cpu DLPAR support for drc-info property") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com
powerpc/cpuhp: BUG -> WARN conversion in offline path
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.
On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.
The CPU DLPAR code has the following shortcomings:
* Cache nodes returned as siblings of a new CPU node by
ibm,configure-connector are silently discarded; only the CPU node is
added to the device tree.
* Cache nodes which become unreferenced in the processor removal path are
not removed from the device tree. This can lead to duplicate nodes when
the post-migration device tree update code replaces cache nodes.
This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.
After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:
When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:
Duplicate name in cpus, renamed to "l2-cache@2011#1"
Duplicate name in cpus, renamed to "l3-cache@3111#1"
and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:
* Correctly processing siblings of the node returned from
dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
that they are not associated with other CPUs or caches.
Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality") Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com
The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.
Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
powerpc: fix unbalanced node refcount in check_kvm_guest()
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.
When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:
drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/chipsfb.c:334:17: expected void *
drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base
drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576
Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.
powerpc/mem: Fix arch/powerpc/mm/mem.c:53:12: error: no previous prototype for 'create_section_mapping'
Commit 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba952 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
powerpc: Drop superfluous pci_dev_is_added() calls
On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups
that are done under pcibios_add_device() which in turn is only called in
pci_device_add() whih is called when a PCI device is scanned.
pci_dev_assign_added() is called in pci_bus_add_device() which is only
called after scanning the device. Thus pci_dev_is_added() is always
false and can be dropped.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log slightly to reflect Oliver's comments] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210910141940.2598035-2-schnelle@linux.ibm.com
Daniel Axtens [Fri, 3 Sep 2021 06:32:46 +0000 (16:32 +1000)]
powerpc: Remove unused prototype for of_show_percpuinfo
commit 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
removed of_show_percpuinfo but didn't remove the prototype.
Remove it.
Fixes: 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c") Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210903063246.70691-1-dja@axtens.net
Xiaoming Ni [Wed, 29 Sep 2021 03:36:46 +0000 (11:36 +0800)]
powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
Xiaoming Ni [Wed, 29 Sep 2021 03:36:45 +0000 (11:36 +0800)]
powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
pci_iounmap'2: Electric Boogaloo: try to make sense of it all
Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.
It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.
Famous last words.
Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is. It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.
Let's see what odd architecture did something else strange in this area
to break things. But my arm64 cross build is clean.
Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked
not present in the higher level page table, correctly instead of
blindly dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the
mixture of inclusive and exclusive ranges. memtype_reserve() expect
'end' being exclusive, but sanitize_phys() wants it inclusive. This
worked so far, but with end being the end of the physical address
space the fail is exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
exceed the previous maximum.
* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid infinite loop for copy from user recovery
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
x86/platform: Increase maximum GPIO number for X86_64
x86/pat: Pass valid address to sanitize_phys()
Merge tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
checked and then reread which makes all the checks invalid. Reuse the
already read value instead"
* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
events: Reuse value read using READ_ONCE instead of re-reading it
Merge tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler"
[ This plays ugly games with atomic_add_return_release() because we
don't have a plain atomic_add_release(), and should really be cleaned
up, I think - Linus ]
* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwbase: Take care of ordering guarantee for fastpath reader
locking/rwbase: Extract __rwbase_write_trylock()
locking/rwbase: Properly match set_and_save_state() to restore_state()
Merge tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when scv (System Call Vectored) is used to make a syscall
when a transaction is active, on Power9 or later.
- Fix bad interactions between rfscv (Return-from scv) and Power9
fake-suspend mode.
- Fix crashes when handling machine checks in LPARs using the Hash MMU.
- Partly revert a recent change to our XICS interrupt controller code,
which broke the recently added Microwatt support.
Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.
* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xics: Set the IRQ chip data for the ICS native backend
powerpc/mce: Fix access error in mce handler
KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
powerpc/64s: system call rfscv workaround for TM bugs
selftests/powerpc: Add scv versions of the basic TM syscall tests
powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
x86/build: Do not add -falign flags unconditionally for clang
kbuild: Fix comment typo in scripts/Makefile.modpost
sh: Add missing FORCE prerequisites in Makefile
gen_compile_commands: fix missing 'sys' package
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix ip display in 'perf script' when output type != attr->type.
- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
fixing the build with libbpf v0.6+.
- Make use of FD() robust in libperf, fixing a segfault with 'perf stat
--iostat list'.
- Initialize addr_location:srcline pointer to NULL when resolving
callchain addresses.
- Fix fused instruction logic for assembly functions in 'perf
annotate'.
* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
libperf evsel: Make use of FD robust.
perf machine: Initialize srcline string member in add_location struct
perf script: Fix ip display when type != attr->type
perf annotate: Fix fused instr logic for assembly functions
dmascc: use proper 'virt_to_bus()' rather than casting to 'int'
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().
That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.
Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there. But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.
If somebody actually uses this driver on an alpha and this fixes it for
you, please email me. Because that is just incredibly bizarre.
With the previous commit (9caea0007601: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.
Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.
Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.
parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.
Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().
Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.
9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm").
Revert these two commits until it's been resolved.
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
Similar to commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").
Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:
$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]
When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.
To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
x86/build: Do not add -falign flags unconditionally for clang
clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:
clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]
To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.
arch/sh/boot/Makefile:87: FORCE prerequisite is missing
Add the missing FORCE prerequisites for all build targets identified by
"make help".
Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.
However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.
This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.
Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.
However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)
The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
As opposed to the --diff option, --commit can get ref names instead of
commit hashes.
When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.
However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.
Prevent the user from using HEAD refs.
A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
alpha: move __udiv_qrnnd library function to arch/alpha/lib/
We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.
But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.
So move the extended-precision divide code to be a regular library
function, just like all the regular division code is. That way ie is
available regardless of math-emulation.
Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.
This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.
There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable. That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.
For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Ian Rogers [Sat, 18 Sep 2021 05:44:40 +0000 (22:44 -0700)]
libperf evsel: Make use of FD robust.
FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.
$ sudo gdb --args perf stat --iostat list
...
Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
50 {
(gdb) bt
#0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
#1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
#2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
at util/evsel.c:2045
#3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
at util/evsel.c:2065
#4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
#5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:833
#6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:1048
#7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
#8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
argv=0x7fffffffe4a0) at perf.c:313
#9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
#10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
#11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
...
(gdb) c
Continuing.
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
/bin/dmesg | grep -i perf may provide additional information.
Program received signal SIGSEGV, Segmentation fault.
0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
166 if (FD(evsel, cpu, thread) >= 0)
v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
backward.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Mon, 19 Jul 2021 14:53:32 +0000 (16:53 +0200)]
perf machine: Initialize srcline string member in add_location struct
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:
# perf top --sort comm -g --ignore-callees=do_idle
terminates with:
#0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
sample_self=sample_self@entry=true) at util/hist.c:657
#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
at util/hist.c:1056
#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
at util/hist.c:1231
#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
at builtin-top.c:842
#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6
If you look at the frame #2, the code is:
488 if (he->srcline) {
489 he->srcline = strdup(he->srcline);
490 if (he->srcline == NULL)
491 goto err_rawdata;
492 }
If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.
Also, if you look at the commit 1fb7d06a509e, it adds the srcline property
into the struct, but not initializing it everywhere needed.
Committer notes:
Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():
2181 if (al.sym != NULL) {
2182 if (perf_hpp_list.parent && !*parent &&
2183 symbol__match_regex(al.sym, &parent_regex))
2184 *parent = al.sym;
2185 else if (have_ignore_callees && root_al &&
2186 symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187 /* Treat this symbol as the root,
2188 forgetting its callees. */
2189 *root_al = al;
2190 callchain_cursor_reset(cursor);
2191 }
2192 }
And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:
Adrian Hunter [Sat, 11 Sep 2021 13:30:53 +0000 (16:30 +0300)]
perf script: Fix ip display when type != attr->type
set_print_ip_opts() was not being called when type != attr->type
because there is not a one-to-one relationship between output types
and attr->type. That resulted in ip not printing.
The attr_type() function is removed, and the match of attr->type to
output type is corrected.
Example on ADL using taskset to select an atom cpu:
# perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Sat, 11 Sep 2021 04:38:53 +0000 (10:08 +0530)]
perf annotate: Fix fused instr logic for assembly functions
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.
When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.
The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.
Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.
Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax
Reviewed-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org>
Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TGA boards were based on the DECchip 21030 PCI graphics accelerator
used mainly for alpha, and existed in a TURBOchannel (TC) version for
the DECstation (MIPS) workstations.
However, the config option for the TGA code is a bit confused, and says
depends on FB && (ALPHA || TC)
because people didn't really want to enable the option for random PCI
environments, so the "ALPHA" stands in for that case (while the TC case
is then the MIPS DECstation case).
So that config dependency is kind of a mixture of architecture and bus
choices. But it's incorrect, in that there were non-PCI-based alpha
hardware, and then the driver just causes warnings:
drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function]
1532 | static void tgafb_unregister(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function]
1387 | static int tgafb_register(struct device *dev)
| ^~~~~~~~~~~~~~
so let's make the config option dependencies a bit more explict:
depends on FB
depends on PCI || TC
depends on ALPHA || TC
where that first "FB" is the software configuration dependency, the
second "PCI || TC" is the hardware bus dependency, while that final
"ALPHA || TC" dependency is the "don't bother asking except for these
situations.
We could make that third case have "COMPILE_TEST" as an option, and mark
the register/unregister functions as __maybe_unused, but I'm not sure
it's really worth it.
The Jensen IO functions are overly copmplicated because some of the IO
addresses refer to special 'local IO' ports, and they get accessed
differently.
That then makes gcc not actually inline them, and since they were marked
"extern inline" when included through the regular <asm/io.h> path, and
then only marked "inline" when included from sys_jensen.c, you never
necessarily got a body for the IO functions at all.
The intent of the sys_jensen.c code is to actually get the non-inlined
copy generated, so remove the 'inline' from the magic macro that is
supposed to sort this all out.
Also, do not mix 'extern inline' functions (that may or may not be
inlined and will not generate a function body if they are not) with
'static inline' (that _will_ generate a function body when not inlined).
Because gcc will complain about this situation:
error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static
because gcc basically doesn't know whether to generate a body for that
static inline function or not for that call site.
So make all of these use that __EXTERN_INLINE marker. Gcc will
generally not inline these things on use, and then generate the function
body out-of-line in sys_jensen.c.
This makes the core IO functions build for the alpha Jensen config.
Not that the rest then builds, because it turns out Jensen also doesn't
enable PCI, which then makes other drievrs very unhappy, but that's a
separate issue.
Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in
drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
1200 | static int tegra_slink_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
1188 | static int tegra_slink_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
mark the functions __maybe_unused to make the build happy.
This hits the alpha allmodconfig build (and others).
David Brazdil [Fri, 17 Sep 2021 13:14:23 +0000 (14:14 +0100)]
of: restricted dma: Fix condition for rmem init
of_dma_set_restricted_buffer fails to handle negative return values from
of_property_count_elems_of_size, e.g. when the property does not exist.
This results in an attempt to assign a non-existent reserved memory
region to the device and a warning being printed. Fix the condition to
take negative values into account.
Fixes: f3cfd136aef0 ("of: restricted dma: Don't fail device probe on rmem init failure") Cc: Will Deacon <will@kernel.org> Signed-off-by: David Brazdil <dbrazdil@google.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210917131423.2760155-1-dbrazdil@google.com Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core.
Specifics:
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts to
access memory associated with a kobject after calling kobject_put()
on it (James Morse)"
* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
Merge tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- page align size in sparc32 arch_dma_alloc (Andreas Larsson)
- tone down a new dma-debug message (Hamza Mahfooz)
- fix the kerneldoc for dma_map_sg_attrs (me)
* tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping:
sparc32: page align size in arch_dma_alloc
dma-debug: prevent an error message from causing runtime problems
dma-mapping: fix the kerneldoc for dma_map_sg_attrs
Merge tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Defer VPD sizing until we actually need the contents; fixes a
boot-time slowdown reported by Dave Jones (Bjorn Helgaas)
- Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a
virtio-iommu boot regression (Jean-Philippe Brucker)
- Add AMD GPU multi-function power dependencies; fixes runtime power
management, including GPU resume and temp and fan sensor issues (Evan
Quan)
- Update VMD maintainer to Nirmal Patel (Jon Derrick)
* tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add Nirmal Patel as VMD maintainer
PCI: Add AMD GPU multi-function power dependencies
PCI/ACPI: Don't reset a fwnode set by OF
PCI/VPD: Defer VPD sizing until first access
Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring iov_iter retry fixes from Jens Axboe:
"This adds a helper to save/restore iov_iter state, and modifies
io_uring to use it.
After that is done, we can now kill the iter->truncated addition that
we added for this release. The io_uring change is being overly
cautious with the save/restore/advance, but better safe than sorry and
we can always improve that and reduce the overhead if it proves to be
of concern. The only case to be worried about in this regard is huge
IO, where iteration can take a while to iterate segments.
I spent some time writing test cases, and expanded the coverage quite
a bit from the last posting of this. liburing carries this regression
test case now:
which exercises all of this. It now also supports provided buffers,
and explicitly tests for end-of-file/device truncation as well.
On top of that, Pavel sanitized the IOPOLL retry path to follow the
exact same pattern as normal IO"
* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: move iopoll reissue into regular IO path
Revert "iov_iter: track truncated size"
io_uring: use iov_iter state save/restore helpers
iov_iter: add helper to save iov_iter state
Merge tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Mostly fixes for regressions in this cycle, but also a few fixes that
predate this release.
The odd one out is a tweak to the direct files added in this release,
where attempting to reuse a slot is allowed instead of needing an
explicit removal of that slot first. It's a considerable improvement
in usability to that API, hence I'm sending it for -rc2.
- io-wq race fix and cleanup (Hao)
- loop_rw_iter() type fix
- SQPOLL max worker race fix
- Allow poll arm for O_NONBLOCK files, fixing a case where it's
impossible to properly use io_uring if you cannot modify the file
flags
- Allow direct open to simply reuse a slot, instead of needing it
explicitly removed first (Pavel)
- Fix a case where we missed signal mask restoring in cqring_wait, if
we hit -EFAULT (Xiaoguang)"
* tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
io_uring: allow retry for O_NONBLOCK if async is supported
io_uring: auto-removal for direct open/accept
io_uring: fix missing sigmask restore in io_cqring_wait()
io_uring: pin SQPOLL data before unlocking ring lock
io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items
io-wq: fix potential race of acct->nr_workers
io-wq: code clean of io_wqe_create_worker()
io_uring: ensure symmetry in handling iter types in loop_rw_iter()
Merge tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix ANA state updates when a namespace is not present (Anton
Eidelman)
- nvmet: fix a width vs precision bug in
nvmet_subsys_attr_serial_show (Dan Carpenter)
- avoid race in shutdown namespace removal (Daniel Wagner)
- fix io_work priority inversion in nvme-tcp (Keith Busch)
- destroy cm id before destroy qp to avoid use after free (Ruozhu
Li)
* tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
blkcg: fix memory leak in blk_iolatency_init
nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
block: flush the integrity workqueue in blk_integrity_unregister
block: check if a profile is actually registered in blk_integrity_unregister
nvme-tcp: fix io_work priority inversion
nvme-rdma: destroy cm id before destroy qp to avoid use after free
nvme-multipath: fix ANA state updates when a namespace is not present
nvme: avoid race in shutdown namespace removal
nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
blk-mq: avoid to iterate over stale request
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes and cleanups from Catalin Marinas:
- Fix the memset() size when re-initialising the SVE state.
- Mark __stack_chk_guard as __ro_after_init.
- Remove duplicate include.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Mark __stack_chk_guard as __ro_after_init
arm64/kernel: remove duplicate include in process.c
arm64/sve: Use correct size when reinitialising SVE state
Merge tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- The first hunk of a Xen swiotlb fixup series fixing multiple minor
issues and doing some small cleanups
- Some further Xen related fixes avoiding WARN() splats when running as
Xen guests or dom0
- A Kconfig fix allowing the pvcalls frontend to be built as a module
* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
swiotlb-xen: drop DEFAULT_NSLABS
swiotlb-xen: arrange to have buffer info logged
swiotlb-xen: drop leftover __ref
swiotlb-xen: limit init retries
swiotlb-xen: suppress certain init retries
swiotlb-xen: maintain slab count properly
swiotlb-xen: fix late init retry
swiotlb-xen: avoid double free
xen/pvcalls: backend can be a module
xen: fix usage of pmd_populate in mremap for pv guests
xen: reset legacy rtc flag for PV domU
PM: base: power: don't try to use non-existing RTC for storing data
xen/balloon: use a kernel thread instead a workqueue
Merge tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Slightly busier than usual rc2, but mostly scattered amdgpu fixes,
some i915 and etnaviv resolves an MMU/runtime PM blowup.
amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license
amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases
radeon:
- AGP fix
i915:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
etnaviv:
- MMU context vs runtime PM fix"
* tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits)
drm/amdgpu/display: add a proper license to dc_link_dp.c
drm/amd/display: Fix white screen page fault for gpuvm
amd/display: enable panel orientation quirks
drm/amdgpu: Demote TMZ unsupported log message from warning to info
drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
drm/radeon: pass drm dev radeon_agp_head_init directly
drm/amdgpu: move iommu_resume before ip init/resume
drm/amdgpu: add amdgpu_amdkfd_resume_iommu
drm/amdkfd: separate kfd_iommu_resume from kfd_resume
drm/amd/display: Link training retry fix for abort case
drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
drm/amd/display: Get backlight from PWM if DMCU is not initialized
drm/amdkfd: make needs_pcie_atomics FW-version dependent
drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
drm/amdgpu: update SMU PPSMC for cyan skilfish
drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
...
Dave Airlie [Thu, 16 Sep 2021 19:53:52 +0000 (05:53 +1000)]
Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc2:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
tx timeout and slot time are currently specified in units of HZ. On
Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this
results in the following error message.
drivers/net/hamradio/6pack.c: In function 'sixpack_open':
drivers/net/hamradio/6pack.c:71:41: error:
unsigned conversion from 'int' to 'unsigned char'
changes value from '256' to '0'
In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:
https://www.linux-ax25.org/wiki/6PACK
Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.
Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:
Dave Airlie [Thu, 16 Sep 2021 19:30:56 +0000 (05:30 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
Fixes a very annoying issue where the driver view of the MMU state gets
out of sync with the actual hardware state across a runtime PM cycle,
so we end up restarting the GPU with the wrong (potentially already
freed) MMU context. Hilarity ensues.
drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused
With the new static annotation, the compiler warns when the functions
are actually unused:
drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
1123 | static int cdn_dp_resume(struct device *dev)
| ^~~~~~~~~~~~~
Mark them __maybe_unused to suppress that warning as well.
[ Not so 'new' static annotations any more, and I removed the part of
the patch that added __maybe_unused to cdn_dp_suspend(), because it's
used by the shutdown/remove code.
So only the resume function ends up possibly unused if CONFIG_PM isn't
set - Linus ]
projects / thirdparty / linux.git / log
