Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
We already have stubs for getuid, geteuid, getgid but
not for getegid. Something in gnulib already does a
check for it during configure, so we already have the
HAVE_GETEGID macro defined.
Only allow the UNIX transport in remote driver when setuid
We don't know enough about quality of external libraries used
for non-UNIX transports, nor do we want to spawn external
commands when setuid. Restrict to the bare minimum which is
UNIX transport for local usage. Users shouldn't need to be
running setuid if connecting to remote hypervisors in any
case.
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
Initialize threading & error layer in LXC controller
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Move virt-login-shell into libvirt-login-shell sub-RPM
Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled
Zhou Yimin [Thu, 17 Oct 2013 07:59:21 +0000 (15:59 +0800)]
remote: fix regression in event deregistration
Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com> Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 9712c2510ec87a87578576a407768380e250a6a4)
Marian Neagul [Tue, 22 Oct 2013 15:03:39 +0000 (16:03 +0100)]
python: Fix Create*WithFiles filefd passing
Commit d76227be added functions virDomainCreateWithFiles and
virDomainCreateXMLWithFiles, but there was a little piece missing in
python bindings. This patch fixes proper passing of file descriptors
in the overwrites of these functions.
Jim Fehlig [Tue, 22 Oct 2013 05:12:22 +0000 (23:12 -0600)]
build: fix build of virt-login-shell on systems with older gnutls
On systems where gnutls uses libgcrypt, I'm seeing the following
build failure
libvirt.c:314: error: variable 'virTLSThreadImpl' has initializer but incomplete type
libvirt.c:319: error: 'GCRY_THREAD_OPTION_PTHREAD' undeclared here (not in a function)
...
Fix by undefining WITH_GNUTLS_GCRYPT in config-post.h
Jim Fehlig [Mon, 21 Oct 2013 21:36:11 +0000 (15:36 -0600)]
build: fix linking virt-login-shell
After commit 3e2f27e1, I've noticed build failures of virt-login-shell
when libapparmor-devel is installed on the build host
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o):
In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined
reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
I was about to commit an easy fix under the build-breaker rule
(build-fix-1.patch), but thought to extend the notion of SECDRIVER_LIBS
to SECDRIVER_CFLAGS, and use both throughout src/Makefile.am where it
makes sense (build-fix-2.patch).
Should I just stick with the simple fix, or is something along the lines
of patch 2 preferred?
Regards,
Jim
>From a0f35945f3127ab70d051101037e821b1759b4bb Mon Sep 17 00:00:00 2001
From: Jim Fehlig <jfehlig@suse.com>
Date: Mon, 21 Oct 2013 15:30:02 -0600
Subject: [PATCH] build: fix virt-login-shell build with apparmor
With libapparmor-devel installed, virt-login-shell fails to link
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o): In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
Fix by linking libvirt_setuid_rpc_client with previously determined
SECDRIVER_LIBS in src/Makefile.am. While at it, introduce SECDRIVER_CFLAGS
and use both throughout src/Makefile.am where it makes sense.
Don't link virt-login-shell against libvirt.so (CVE-2013-4400)
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Close all non-stdio FDs in virt-login-shell (CVE-2013-4400)
We don't want to inherit any FDs in the new namespace
except for the stdio FDs. Explicitly close them all,
just in case some do not have the close-on-exec flag
set.
Only allow 'stderr' log output when running setuid (CVE-2013-4400)
We must not allow file/syslog/journald log outputs when running
setuid since they can be abused to do bad things. In particular
the 'file' output can be used to overwrite files.
Add helpers for getting env vars in a setuid environment
Care must be taken accessing env variables when running
setuid. Introduce a virGetEnvAllowSUID for env vars which
are safe to use in a setuid environment, and another
virGetEnvBlockSUID for vars which are not safe. Also add
a virIsSUID helper method for any other non-env var code
to use.
Fix perms for virConnectDomainXML{To,From}Native (CVE-2013-4401)
The virConnectDomainXMLToNative API should require 'connect:write'
not 'connect:read', since it will trigger execution of the QEMU
binaries listed in the XML.
Also make virConnectDomainXMLFromNative API require a full
read-write connection and 'connect:write' permission. Although the
current impl doesn't trigger execution of QEMU, we should not
rely on that impl detail from an API permissioning POV.
Ján Tomko [Wed, 9 Oct 2013 12:17:13 +0000 (14:17 +0200)]
LXC: Fix handling of RAM filesystem size units
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
(cherry picked from commit 3f029fb5319b9dc9cc2fbf8d1ba4505ee9e4b1e3)
After successful @cmd construction the memory where @keys points to is
part of @cmd. Avoid double freeing it.
(cherry picked from commit 3e8343e1510741623aa5bc1dfb74ec39fde868dd)
Ryota Ozaki [Sat, 5 Oct 2013 05:56:36 +0000 (14:56 +0900)]
rpc: fix getsockopt for LOCAL_PEERCRED on Mac OS X
This fixes the following error:
error : virGetUserEnt:703 : Failed to find user record for uid '32654'
'32654' (it's random and varies) comes from getsockopt with
LOCAL_PEERCRED option. getsockopt returns w/o error but seems
to not set any value to the buffer for uid.
For Mac OS X, LOCAL_PEERCRED has to be used with SOL_LOCAL level.
With SOL_LOCAL, getsockopt returns a correct uid.
Note that SOL_LOCAL can be found in
/System/Library/Frameworks/Kernel.framework/Versions/A/Headers/sys/un.h.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 5a468b38b6b9ac66c1db5d8ed5d5a122a9cf01cd)
Remove use of virConnectPtr from all remaining nwfilter code
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Don't pass virConnectPtr in nwfilter 'struct domUpdateCBStruct'
The nwfilter driver only needs a reference to its private
state object, not a full virConnectPtr. Update the domUpdateCBStruct
struct to have a 'void *opaque' field instead of a virConnectPtr.
So far the virNetDevBandwidthEqual() expected both ->in and ->out items
to be allocated for both @a and @b compared. This is not necessary true
for all our code. For instance, running 'update-device' twice over a NIC
with the very same XML results in SIGSEGV-ing in this function.
qemu_hotplug: Allow QoS update in qemuDomainChangeNet
The qemuDomainChangeNet() is called when 'virsh update-device' is
invoked on a NIC. Currently, we fail to update the QoS even though
we have routines for that.
Claudio Bley [Mon, 7 Oct 2013 10:13:00 +0000 (12:13 +0200)]
Adjust legacy max payload size to account for header information
Commit 27e81517a87 set the payload size to 256 KB, which is
actually the max packet size, including the size of the header.
Reduce this by VIR_NET_MESSAGE_HEADER_MAX (24) and set
VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX to 262120, which was the original
value before increasing the limit in commit eb635de1fed.
The libvirtd server pushes data out to clients. It does not
know what protocol version the client might have, so must be
conservative and use the old payload limits. ie send no more
than 256kb of data per packet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
LXC: workaround machined uncleaned data with containers running systemd.
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
Boris Fiuczynski [Mon, 30 Sep 2013 12:23:17 +0000 (14:23 +0200)]
virscsi: hostdev SCSI AdapterId retrieval fix
Fixed the retrieval of the AdapterId from the AdapterName of the
hostdev source so it does return an error instead of leaving the
adapter_id uninitialized.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Peter Krempa [Mon, 30 Sep 2013 09:47:47 +0000 (11:47 +0200)]
qemu: process: Silence coverity warning when rewinding log file
The change in ef29de14c37d14abc546e90555a0093797facfdd that introduced
better error logging from qemu introduced a warning from coverity about
unused return value from lseek. Silence this warning and fix typo in the
corresponding error message.
Michal Privoznik [Mon, 30 Sep 2013 09:23:08 +0000 (11:23 +0200)]
python: Document virNodeGetInfo bug
The memory size in virNodeGetInfo python API binding is reported in MiB
instead of KiB (like we have in C struct). However, there already might
be applications out there relying on this inconsistence so we can't
simply fix it. Document this sad fact as known bug.
Currently the VMware version check code only supports two types of
VMware backends, Workstation and Player. But in the near future we will
have an additional one so we need to support more. Additionally, we
discover and cache the path to the vmrun binary so we should use that
path when using the corresponding binary from the VMware VIX SDK.
Michal Privoznik [Fri, 27 Sep 2013 16:04:31 +0000 (18:04 +0200)]
Makefile.am: Always include rule to make org.libvirt.api.policy
When running 'make dist' on a system without policykit, we currently
fail. This is because $(srcdir)/access/org.libvirt.api.policy is in
EXTRA_DIST, however, the rule to generate the file is conditional
whether we build with polkit or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 27 Sep 2013 14:47:12 +0000 (16:47 +0200)]
fchosttest: Run the test only under linux
Currently, we have functions to handle fc_host implemented just
for linux. On all other platforms an error is thrown. It makes no
sense to run the test on those platforms then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 27 Sep 2013 14:20:49 +0000 (16:20 +0200)]
genprotocol.pl: Fix code on FreeBSD too
On some systems (linux, cygwin and gnukfreebsd) rpcgen generates files
which when compiling produces this warning:
remote/remote_protocol.c: In function 'xdr_remote_node_get_cpu_stats_ret':
remote/remote_protocol.c:530: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
Hence, on those systems we need to post-process the files by the
rpc/genprotocol.pl perl script. At the beginning of the script the OS is
detected via $^O perl variable. From my latest build on FreeBSD I see we
need to fix the code there too. On FreeBSD the variable contains
'freebsd' string:
http://perldoc.perl.org/perlport.html#PLATFORMS
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The debug message said there was a timeout of 0 pending for -1 ms which
made me think this is where a hang was coming from but according to the
function comments this case means that there is no timeout pending so
make the debug message say that instead of saying there's a -1 ms
timeout.
While BSDs don't support process creation timestamp information via
PEERCRED for Unix sockets, we need to actually initialize the value
because it is used by the libvirt code.
Fix crash in libvirtd when events are registered & ACLs active
When a client disconnects from libvirtd, all event callbacks
must be removed. This involves running the public API
virConnectDomainEventDeregisterAny
This code does not run in normal API dispatch context, so no
identity was set. The result was that the access control drivers
denied the attempt to deregister callbacks. The callbacks thus
continued to trigger after the client was free'd causing fairly
predictable use of free memory & a crash.
This can be triggered by any client with readonly access when
the ACL drivers are active.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
autoport='yes' listen='127.0.0.1'
defaultMode='secure'>
However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.
This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
However, the child only unreferenced hookData.cfg and the parent only
removed the cfg reference. That said, we don't need to increment the
reference counter when assigning cfg to hookData. Both the child and the
parent will correctly remove the reference on cfg (the child will do
that through hookData).
Commit 6d7d0b1869ed293e3208d11f375cecea0129dfc5 (in 1.1.2) added bounds
checking to virDomainGetJobStats. But even at that time the API was able
to return 20 parameters while the limit was set to 16.
Eric Blake [Thu, 26 Sep 2013 21:14:38 +0000 (15:14 -0600)]
build: fix use of rpc.h on cygwin
Caused by commit 012c25e8 splitting out a convenience library.
CC libvirtd_conf_la-libvirtd-config.lo
In file included from ../src/rpc/virnetmessage.h:24:0,
from ../src/rpc/virnetserverprogram.h:27,
from ../src/rpc/virnetserver.h:32,
from libvirtd-config.c:31:
../src/rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file
or directory
qemu: virDomainControllerFind may return 0 if controller found
The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Peter Krempa [Thu, 26 Sep 2013 06:12:39 +0000 (08:12 +0200)]
conf: Don't crash on invalid chardev source definition of RNGs and other
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
spec: Clean up distribution of ChangeLog (and others)
- Move COPYING* to libvirt-client, so every package pulls them in
- Move AUTHORS ChangeLog.gz NEWS README TODO from -daemon to -docs
- Drop duplicate distribution of docs in -python
Avoid double free in qemuMonitorCommonTestInit on OOM
The qemuMonitorCommonTestInit method did not allocate the
test object, so it should not free it upon failure. Doing
so causes a double free with the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For inexplicable reasons, the nwfilter XML parser is intentionally
ignoring errors that arise during parsing. As well as meaning that
users don't get any feedback on their XML mistakes, this will lead
it to silently drop data in OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Normally a lockspace resource is not freed while there are
active owners. During initial resource creation though, an
OOM error will trigger this scenario. virLockSpaceResourceFree
was not freeing the 'owners' field in this case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virStoragePoolDefParseSource method would set def->nhosts
before allocating def->hosts. If the allocation failed due to
OOM, the cleanup code would crash accessing out of bounds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainSnapshotDefParse method assigned to def->ndisks
before allocating def->disks. Thus if an OOM occurred, the
cleanup code would access out of bounds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Don't clobber return value in virInterfaceDefParseProtoIPv6
Several places in virInterfaceDefParseProtoIPv6 clobber the
default 'ret' return value. So when jumping to cleanup on
error, 'ret' may mistakenly be set to 0 instead of -1. This
caused failure to report OOM errors, meaning data was silently
lost during parsing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The methods for obtaining the Xen dom ID cannot distinguish
between returning -1 due to an error and returning -1 due to
the domain being shutoff. Change them to return the dom ID
via an output parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The xenParseSxpr method sets def->nconsoles to 1 before allocating
the def->consoles array. If the allocation fails due to OOM the
cleanup code will thus crash accessing out of bounds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The xenParseXM sets def->nconsoles to 1 before claling
VIR_REALLOC_N on def->consoles. So if the alloc fails
due to OOM, the cleanup code will crash accessing a
console that does not exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
projects / thirdparty / libvirt.git / log
