feijuan.li [Wed, 14 May 2025 06:35:11 +0000 (14:35 +0800)]
drm/edid: fixed the bug that hdr metadata was not reset
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cbe0 ("drm: Parse HDR metadata info from EDID") Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: "feijuan.li" <feijuan.li@samsung.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Hyejeong Choi [Tue, 13 May 2025 02:06:38 +0000 (21:06 -0500)]
dma-buf: insert memory barrier before updating num_fences
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com> Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence") CC: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com Signed-off-by: Christian König <christian.koenig@amd.com>
Markus Burri [Thu, 8 May 2025 13:06:08 +0000 (15:06 +0200)]
accel/ivpu: Use effective buffer size for zero terminator
Use the effective written size instead of original size as index for zero
termination. If the input from user-space is to larger and the input is
truncated, the original size is out-of-bound.
Since there is an upfront size check here, the change is for consistency.
drm/tiny: panel-mipi-dbi: Use drm_client_setup_with_fourcc()
Since commit 559358282e5b ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org Fixes: 559358282e5b ("drm/fb-helper: Don't use the preferred depth for the BPP default") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
I Hsin Cheng [Mon, 5 May 2025 18:43:38 +0000 (02:43 +0800)]
drm/meson: Use 1000ULL when operating with mode->clock
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
The abstraction was previously added to support separate
ttm_backup implementations.
However with the current implementation casting from a
struct file to a struct ttm_backup, we run into trouble since
struct file may have randomized the layout and gcc complains.
Remove the struct ttm_backup abstraction
Cc: dri-devel@lists.freedesktop.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Kees Cook <kees@kernel.org> Closes: https://lore.kernel.org/dri-devel/9c8dbbafdaf9f3f089da2cde5a772d69579b3795.camel@linux.intel.com/T/#mb153ab9216cb813b92bdeb36f391ad4808c2ba29 Suggested-by: Christian König <christian.koenig@amd.com> Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250502130014.3156-1-thomas.hellstrom@linux.intel.com
The docs were not properly updated from an earlier version of the code.
Fixes: e7b5d23e5d47 ("drm/ttm: Provide a shmem backup implementation") Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250502130101.3185-1-thomas.hellstrom@linux.intel.com
drm/v3d: Add job to pending list if the reset was skipped
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout.
drm: Fix potential overflow issue in event_string array
When calling scnprintf() to append recovery method to event_string,
the second argument should be `sizeof(event_string) - len`, otherwise
there is a potential overflow problem.
Karol Wachowski [Fri, 25 Apr 2025 09:36:56 +0000 (11:36 +0200)]
accel/ivpu: Correct mutex unlock order in job submission
The mutex unlock for vdev->submitted_jobs_lock was incorrectly placed
before unlocking file_priv->lock. Change order of unlocks to avoid potential
race conditions.
Fixes: 5bbccadaf33e ("accel/ivpu: Abort all jobs after command queue unregister") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250425093656.2228168-1-jacek.lawrynowicz@linux.intel.com
accel/ivpu: Fix pm related deadlocks in cmdq ioctls
Fix deadlocks in ivpu_cmdq_create_ioctl() and ivpu_cmdq_destroy_ioctl()
related to runtime suspend.
Runtime suspend acquires file_priv->lock mutex by calling
ivpu_cmdq_reset_all_contexts(). The same lock is acquired in the cmdq
ioctls. If one of the cmdq ioctls is called while runtime suspend is in
progress, it can lead to a deadlock.
Increase JMS message state dump command timeout to 100 ms. On some
platforms, the FW may take a bit longer than 50 ms to dump its state
to the log buffer and we don't want to miss any debug info during TDR.
Russell Cloran [Tue, 15 Apr 2025 05:32:59 +0000 (22:32 -0700)]
drm/mipi-dbi: Fix blanking for non-16 bit formats
On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.
This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.
Maxime Ripard [Tue, 8 Apr 2025 14:07:58 +0000 (16:07 +0200)]
drm/tests: shmem: Fix memleak
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
Janne Grunau [Tue, 4 Mar 2025 19:12:14 +0000 (20:12 +0100)]
drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:
error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER
Janne Grunau [Mon, 28 Apr 2025 11:37:15 +0000 (13:37 +0200)]
drm: adp: Enable vblank interrupts in crtc's .atomic_enable
Calling drm_crtc_vblank_on() drm_crtc_helper_funcs' atomic_enable is
expected to enable vblank interrupts. It may have been avoided here to
due to drm_crtc_vblank_get()'s error behavior after
drm_crtc_vblank_reset(). With that fixed in the preceding change the
driver can call drm_crtc_vblank_on() from adp_crtc_atomic_enable().
Janne Grunau [Mon, 28 Apr 2025 11:37:14 +0000 (13:37 +0200)]
drm: adp: Handle drm_crtc_vblank_get() errors
drm_crtc_vblank_get() may fail when it's called before
drm_crtc_vblank_on() on a resetted CRTC. This occurs in
drm_crtc_helper_funcs' atomic_flush() calls after
drm_atomic_helper_crtc_reset() for example directly after probe. Send
the vblank event directly in such cases. Avoids following warning in
the subsequent drm_crtc_vblank_put() call from the vblank irq handler as
below:
Modifying `crtc->state->event` here is fine as crtc->mutex is locked by
the non-async atomic commit. In retrospect this looks so obvious that it
doesn't warrant a comment in the file.
If we unbind a driver from the PCI device with an active DRM client,
subsequent read of the fdinfo data associated with the file descriptor in
question will not end well.
Protect the path with a drm_dev_enter/exit() pair.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: 3f09a0cd4ea3 ("drm: Add common fdinfo helper") Cc: <stable@vger.kernel.org> # v6.5+ Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250418162512.72324-1-tvrtko.ursulin@igalia.com
drm/ttm: fix the warning for hit_low and evict_low
fix the below warning messages:
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'hit_low' not described in 'ttm_bo_swapout_walk'
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'evict_low' not described in 'ttm_bo_swapout_walk'
Correct setup of D0i2 disable which was
by mistake set up to value 1 and use BIT(1) instead.
Fixes: 011529fe8112 ("accel/ivpu: Implement D0i2 disable test mode") Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@linux.intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250416102629.384626-1-maciej.falkowski@linux.intel.com
Karol Wachowski [Wed, 16 Apr 2025 10:26:16 +0000 (12:26 +0200)]
accel/ivpu: Correct DCT interrupt handling
Fix improper use of dct_active_percent field in DCT interrupt handler
causing DCT to never get enabled. Set dct_active_percent internally before
IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.
Fixes: a19bffb10c46 ("accel/ivpu: Implement DCT handling") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250416102616.384577-1-maciej.falkowski@linux.intel.com
Philipp Stanner [Tue, 15 Apr 2025 12:19:00 +0000 (14:19 +0200)]
drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled.
Cc: stable@vger.kernel.org # v5.10+ Fixes: ea13e5abf807 ("drm/nouveau: signal pending fences when channel has been killed") Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Hugo Villeneuve [Thu, 17 Apr 2025 19:55:06 +0000 (15:55 -0400)]
drm: panel: jd9365da: fix reset signal polarity in unprepare
commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().
It was not done in jadard_unprepare() because of an incorrect assumption
about reset line handling in power off mode. After looking into the
datasheet, it now appears that before disabling regulators, the reset line
is deasserted first, and if reset_before_power_off_vcioo is true, then the
reset line is asserted.
Fix reset polarity by inverting gpiod_set_value() second argument in
in jadard_unprepare().
Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel") Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
The patch does permit the offending YUV420 @ 59.94 phy_freq and
vclk_freq mode to match in calculations. It also results in all
fractional rates being unavailable for use. This was unintended
and requires the patch to be reverted.
Fix an off-by-one error when setting the vblanking start in
<VBLKSTR>. Commit d6460bd52c27 ("drm/mgag200: Add dedicated
variables for blanking fields") switched the value from
crtc_vdisplay to crtc_vblank_start, which DRM helpers copy
from the former. The commit missed to subtract one though.
Reported-by: Wakko Warner <wakko@animx.eu.org> Closes: https://lore.kernel.org/dri-devel/CAMwc25rKPKooaSp85zDq2eh-9q4UPZD=RqSDBRp1fAagDnmRmA@mail.gmail.com/ Reported-by: Сергей <afmerlord@gmail.com> Closes: https://lore.kernel.org/all/5b193b75-40b1-4342-a16a-ae9fc62f245a@gmail.com/ Closes: https://bbs.archlinux.org/viewtopic.php?id=303819 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Wakko Warner <wakko@animx.eu.org> Link: https://lore.kernel.org/r/20250416083847.51764-1-tzimmermann@suse.de
drm/gem: Internally test import_attach for imported objects
Test struct drm_gem_object.import_attach to detect imported objects.
During object clenanup, the dma_buf field might be NULL. Testing it in
an object's free callback then incorrectly does a cleanup as for native
objects. Happens for calls to drm_mode_destroy_dumb_ioctl() that
clears the dma_buf field in drm_gem_object_exported_dma_buf_free().
v3:
- only test for import_attach (Boris)
v2:
- use import_attach.dmabuf instead of dma_buf (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: b57aa47d39e9 ("drm/gem: Test for imported GEM buffers with helper") Reported-by: Andy Yan <andyshrk@163.com> Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/ Tested-by: Andy Yan <andyshrk@163.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Anusha Srivatsa <asrivats@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20250416065820.26076-1-tzimmermann@suse.de
Dan Carpenter [Tue, 8 Apr 2025 11:01:26 +0000 (14:01 +0300)]
dma-buf/sw_sync: Decrement refcount on error in sw_sync_ioctl_get_deadline()
Call dma_fence_put(fence) before returning an error if
dma_fence_to_sync_pt() fails. Use an unwind ladder at the
end of the function to do the cleanup.
Karol Wachowski [Tue, 1 Apr 2025 15:59:39 +0000 (17:59 +0200)]
accel/ivpu: Add cmdq_id to job related logs
Add tracking of command queue ID in JOB debug message to improve
debugging capabilities.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155939.4049467-1-maciej.falkowski@linux.intel.com
Add sysfs files that show maximum and current
frequency of the NPU's data processing unit.
New sysfs entries:
- npu_max_frequency_mhz
- npu_current_frequency_mhz
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155912.4049340-3-maciej.falkowski@linux.intel.com
accel/ivpu: Fix the NPU's DPU frequency calculation
Fix the frequency returned to the user space by
the DRM_IVPU_PARAM_CORE_CLOCK_RATE GET_PARAM IOCTL.
The kernel driver returned CPU frequency for MTL and bare
PLL frequency for LNL - this was inconsistent and incorrect
for both platforms. With this fix the driver returns maximum
frequency of the NPU data processing unit (DPU) for all HW
generations. This is what user space always expected.
Also do not set CPU frequency in boot params - the firmware
does not use frequency passed from the driver, it was only
used by the early pre-production firmware.
With that we can remove CPU frequency calculation code.
Show NPU frequency in FREQ_CHANGE interrupt when frequency
tracking is enabled.
Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155912.4049340-2-maciej.falkowski@linux.intel.com
Karol Wachowski [Tue, 1 Apr 2025 15:58:17 +0000 (17:58 +0200)]
accel/ivpu: Update FW Boot API to version 3.28.3
Update firmware Boot API to 3.28.3 version and
adjust driver to API changes for preemption buffers.
Use new preemption buffer size fields from FW header added to
firmware boot API for preemption buffers allocations,
if those new fields are zeroed, use old values instead.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155817.4049220-1-maciej.falkowski@linux.intel.com
accel/ivpu: Flush pending jobs of device's workqueues
Use flush_work() instead of cancel_work_sync() for driver IRQ
workqueues to guarantee that remaining pending work
will be handled.
This resolves two issues that were encountered where a driver was left
in an incorrect state as the bottom-half was canceled:
1. Cancelling context-abort of a job that is still executing and
is causing translation faults which is going to cause additional TDRs
2. Cancelling bottom-half of a DCT (duty-cycle throttling) request
which will cause a device to not be adjusted to an external frequency
request.
Fixes: bc3e5f48b7ee ("accel/ivpu: Use workqueue for IRQ handling") Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250401155755.4049156-1-maciej.falkowski@linux.intel.com
drm/v3d: Fix Indirect Dispatch configuration for V3D 7.1.6 and later
This commit is a resubmission of commit 1fe1c66274fb ("drm/v3d: Fix
Indirect Dispatch configuration for V3D 7.1.6 and later"), which was
accidentally reverted by commit 91dae758bdb8 ("Merge tag
'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel
into drm-next"), likely due to an unfortunate conflict resolution.
From the original commit message:
```
`args->cfg[4]` is configured in Indirect Dispatch using the number of
batches. Currently, for all V3D tech versions, `args->cfg[4]` equals the
number of batches subtracted by 1. But, for V3D 7.1.6 and later, we must not
subtract 1 from the number of batches.
Implement the fix by checking the V3D tech version and revision.
Fixes several `dEQP-VK.synchronization*` CTS tests related to Indirect Dispatch.
```
Fixes: 91dae758bdb8 ("Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://lore.kernel.org/r/20250409205051.9639-1-mcanal@igalia.com
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_connector_helper_tv_get_modes_check() test never does however,
which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 1e4a91db109f ("drm/probe-helper: Provide a TV get_modes helper") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-7-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_modes_analog_tv_mono_576i() test never does however, which
leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: e31538489908 ("drm/tests: Add tests for the new Monochrome value of tv_mode") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-6-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_modes_analog_tv tests never
do however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 4fcd238560ee ("drm/modes: Add a function to generate analog display modes") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-5-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_cmdline_tv_options() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: e691c9992ae1 ("drm/modes: Introduce the tv_mode property as a command-line option") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-4-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_pick_cmdline_named() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: fedcaf726f54 ("drm/modes: Properly generate a drm_display_mode from a named mode") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-3-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_mode_find_dmt() returns a drm_display_mode that needs to be
destroyed later one. The drm_test_pick_cmdline_res_1920_1080_60() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 8fc0380f6ba7 ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-2-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
tools/include: make uapi/linux/types.h usable from assembly
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
Len Brown [Sun, 6 Apr 2025 18:49:20 +0000 (14:49 -0400)]
tools/power turbostat: v2025.05.06
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Len Brown [Sun, 6 Apr 2025 15:18:39 +0000 (11:18 -0400)]
tools/power turbostat: report CoreThr per measurement interval
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
Justin Ernst [Wed, 19 Mar 2025 20:27:31 +0000 (15:27 -0500)]
tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f75256b ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
Uday Shankar [Mon, 31 Mar 2025 22:46:32 +0000 (16:46 -0600)]
kbuild: rpm-pkg: build a debuginfo RPM
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Daniel Gomez [Fri, 28 Mar 2025 14:28:37 +0000 (14:28 +0000)]
kconfig: merge_config: use an empty file as initfile
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sun, 22 Dec 2024 00:30:53 +0000 (09:30 +0900)]
nios2: migrate to the generic rule for built-in DTB
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Johan Korsnes [Sun, 23 Mar 2025 19:13:30 +0000 (20:13 +0100)]
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
This option was removed from Kconfig in 8c710f75256b ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Artur Rojek [Sun, 16 Feb 2025 17:55:44 +0000 (18:55 +0100)]
sh: Align .bss section padding to 8-byte boundary
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3c5 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Rob Landley <rob@landley.net> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
Nam Cao [Wed, 5 Feb 2025 10:55:20 +0000 (11:55 +0100)]
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:18 +0000 (11:55 +0100)]
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:17 +0000 (11:55 +0100)]
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Nam Cao [Wed, 5 Feb 2025 10:55:16 +0000 (11:55 +0100)]
hrtimers: Make callback function pointer private
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Nam Cao [Wed, 5 Feb 2025 10:55:11 +0000 (11:55 +0100)]
hrtimers: Switch to use __htimer_setup()
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Merge tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a race condition in the newly added eip93 driver"
* tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash
Merge tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix machine check handler _CIF_MCCK_GUEST bit setting by adding the
missing base register for relocated lowcore address
- Fix build failure on older linkers by conditionally adding the
-no-pie linker option only when it is supported
- Fix inaccurate kernel messages in vfio-ap by providing descriptive
error notifications for AP queue sharing violations
- Fix PCI isolation logic by ensuring non-VF devices correctly return
false in zpci_bus_is_isolated_vf()
- Fix PCI DMA range map setup by using dma_direct_set_offset() to add a
proper sentinel element, preventing potential overruns and
translation errors
- Cleanup header dependency problems with asm-offsets.c
- Add fault info for unexpected low-address protection faults in user
mode
- Add support for HOTPLUG_SMT, replacing the arch-specific "nosmt"
handling with common code handling
- Use bitop functions to implement CPU flag helper functions to ensure
that bits cannot get lost if modified in different contexts on a CPU
- Remove unused machine_flags for the lowcore
* tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Fix no AP queue sharing allowed message written to kernel log
s390/pci: Fix dev.dma_range_map missing sentinel element
s390/mm: Dump fault info in case of low address protection fault
s390/smp: Add support for HOTPLUG_SMT
s390: Fix linker error when -no-pie option is unavailable
s390/processor: Use bitop functions for cpu flag helper functions
s390/asm-offsets: Remove ASM_OFFSETS_C
s390/asm-offsets: Include ftrace_regs.h instead of ftrace.h
s390/kvm: Split kvm_host header file
s390/pci: Fix zpci_bus_is_isolated_vf() for non-VFs
s390/lowcore: Remove unused machine_flags
s390/entry: Fix setting _CIF_MCCK_GUEST with lowcore relocation
Merge tag '6.15-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- reconnect fixes: three for updating rsize/wsize and an SMB1 reconnect
fix
- RFC1001 fixes: fixing connections to nonstandard ports, and negprot
retries
- fix mfsymlinks to old servers
- make mapping of open flags for SMB1 more accurate
- permission fixes: adding retry on open for write, and one for stat to
workaround unexpected access denied
- add two new xattrs, one for retrieving SACL and one for retrieving
owner (without having to retrieve the whole ACL)
- fix mount parm validation for echo_interval
- minor cleanup (including removing now unneeded cifs_truncate_page)
* tag '6.15-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: Implement is_network_name_deleted for SMB1
cifs: Remove cifs_truncate_page() as it should be superfluous
cifs: Do not add FILE_READ_ATTRIBUTES when using GENERIC_READ/EXECUTE/ALL
cifs: Improve SMB2+ stat() to work also without FILE_READ_ATTRIBUTES
cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES
cifs: Fix querying and creating MF symlinks over SMB1
cifs: Fix access_flags_to_smbopen_mode
cifs: Fix negotiate retry functionality
cifs: Improve handling of NetBIOS packets
cifs: Allow to disable or force initialization of NetBIOS session
cifs: Add a new xattr system.smb3_ntsd_owner for getting or setting owner
cifs: Add a new xattr system.smb3_ntsd_sacl for getting or setting SACLs
smb: client: Update IO sizes after reconnection
smb: client: Store original IO parameters and prevent zero IO sizes
smb:client: smb: client: Add reverse mapping from tcon to superblocks
cifs: remove unreachable code in cifs_get_tcp_session()
cifs: fix integer overflow in match_server()
Merge tag 'ntb-6.15' of https://github.com/jonmason/ntb
Pull ntb fixes from Jon Mason:
"Bug fixes for NTB Switchtec driver mw negative shift, Intel NTB link
status db, ntb_perf double unmap (in error case), and MSI 64bit
arithmetic.
Also, add new AMD NTB PCI IDs, update AMD NTB maintainer, and pull in
patch to reduce the stack usage in IDT driver"
* tag 'ntb-6.15' of https://github.com/jonmason/ntb:
ntb_hw_amd: Add NTB PCI ID for new gen CPU
ntb: reduce stack usage in idt_scan_mws
ntb: use 64-bit arithmetic for the MSI doorbell mask
MAINTAINERS: Update AMD NTB maintainers
ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk()
ntb: intel: Fix using link status DB's
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
Miroslav reported that the changes for handling the inconsistencies in the
coarse time getters result in a regression on the adjtimex() side.
There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
Userspace expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Revert the change, so that the established expectations of user space
implementations (ntpd, chronyd) are restored. The re-introduced
inconsistency of the coarse time getters will be addressed in a subsequent
fix.
Fixes: 757b000f7b93 ("timekeeping: Fix possible inconsistencies in _COARSE clockids") Reported-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/Z-qsg6iDGlcIJulJ@localhost
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
Merge tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the merge window,
everything is driver specific with nothing standing out particularly"
* tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835: Restore native CS probing when pinctrl-bcm2835 is absent
spi: bcm2835: Do not call gpiod_put() on invalid descriptor
spi: cadence-qspi: revert "Improve spi memory performance"
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
spi: fsl-qspi: use devm function instead of driver remove
spi: SPI_QPIC_SNAND should be tristate and depend on MTD
spi-rockchip: Fix register out of bounds access
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
Merge tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
Thomas Gleixner [Fri, 4 Apr 2025 14:51:19 +0000 (16:51 +0200)]
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
Frank reported, that the common irq_force_complete_move() breaks the out of
tree build of ia64. The reason is that ia64 uses the migration code, but
does not have hierarchical interrupt domains enabled.
This went unnoticed in mainline as both x86 and RISC-V have hierarchical
domains enabled. Not that it matters for mainline, but it's still
inconsistent.
Use irqd_get_parent_data() instead of accessing the parent_data field
directly. The helper returns NULL when hierarchical domains are disabled
otherwise it accesses the parent_data field of the domain.
No functional change.
Fixes: 751dc837dabd ("genirq: Introduce common irq_force_complete_move() implementation") Reported-by: Frank Scheiner <frank.scheiner@web.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frank Scheiner <frank.scheiner@web.de> Link: https://lore.kernel.org/all/87h634ugig.ffs@tglx
Jakub Kicinski [Thu, 3 Apr 2025 14:56:36 +0000 (07:56 -0700)]
selftests: net: amt: indicate progress in the stress test
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
It is confusing to see 'host' and 'domain' to be used as 'domain'. Given
this header is all about domains, switch the remaining 'host' uses to
'domain'.
projects / thirdparty / linux.git / log
