Marco Pagani [Wed, 23 Nov 2022 08:56:39 +0000 (09:56 +0100)]
habanalabs/gaudi2: added memset for the cq_size register
The clang-analyzer reported a warning: "Value stored to
'cq_size_addr' is never read".
The cq_size register of dcore0 is not being zeroed using
gaudi2_memset_device_lbw(), along with the other cq_* registers,
even though the corresponding cq_size_addr variable is set.
farah kassabri [Tue, 8 Nov 2022 13:24:33 +0000 (15:24 +0200)]
habanalabs/gaudi2: change memory scrub mechanism
Currently the scrubbing mechanism used the EDMA engines by directly
setting the engine core registers to scrub a chunk of memory.
Due to a sporadic failure with this mechanism, it was decided to
initiate the engines via its QMAN using LIN-DMA packets.
Oded Gabbay [Thu, 10 Nov 2022 15:24:02 +0000 (17:24 +0200)]
habanalabs: extend process wait timeout in device fine
Processes that use our device are likely to use at the same time other
devices such as remote storage.
In case our device is removed and a user process is still using the
device, we need to kill the user process. However, if that process
has a thread waiting for i/o to complete on remote storage, for example,
the process won't terminate.
Let's give it enough time to terminate before giving up.
Tomer Tayar [Wed, 9 Nov 2022 16:08:38 +0000 (18:08 +0200)]
habanalabs: reset device if still in use when released
If the device file is released while a context is still held, it won't
be possible to reopen it until the context is eventually released.
If that doesn't happen, only a device reset will revert it back to an
operational state, i.e. need to wait for a CS timeout or an error, or to
wait for an external intervention of injecting a reset via sysfs.
At this stage, after the device was released by user, context is held
either because of CS which were left running on the device and are not
relevant anymore, or due to missing cleanup steps from user side.
All of this is in any case handled in the device reset flow, so initiate
the reset at this point instead of waiting for it.
Tomer Tayar [Thu, 20 Oct 2022 11:40:16 +0000 (14:40 +0300)]
habanalabs/gaudi2: return to reset upon SM SEI BRESP error
Due to a H/W issue in the LBW path to the PCIE_DBI MSI-X doorbell, there
were false sporadic error responses in SM when it was configured to
write to there, and hence no reset was done as part of handling the
relevant event.
Now that the virtual MSI-X doorbell is used, such errors in SM are not
expected and reset shouldn't be skipped.
Dani Liberman [Thu, 27 Oct 2022 17:38:26 +0000 (20:38 +0300)]
habanalabs: use single threaded WQ for event handling
Creating event queue workqueue using alloc_workqueue made it run in
multi threaded mode, which caused parallel dumping of events as well as
parallel events notifying to user, causing logs with multiple
events to be out of order.
Fixed by creating event queue workqueue as single threaded work queue.
Ofir Bitton [Wed, 26 Oct 2022 13:20:45 +0000 (16:20 +0300)]
habanalabs/gaudi2: add PCI revision 2 support
Add support for Gaudi2 Device with PCI revision 2.
Functionality is exactly the same as revision 1, the only difference
is device name exposed to user.
Tomer Tayar [Sun, 23 Oct 2022 22:14:18 +0000 (01:14 +0300)]
habanalabs: fix PCIe access to SRAM via debugfs
hl_access_sram_dram_region() uses a region base which is set within the
hl_set_dram_bar() function. However, for SRAM access this function is
not called, and we end up with a wrong value of region base and with a
bad calculated address.
Fix it by initializing the region base value independently of whether
hl_set_dram_bar() is called or not.
Tal Cohen [Tue, 18 Oct 2022 14:35:06 +0000 (17:35 +0300)]
habanalabs: no consecutive err when user context is enabled
Consecutive error protects a device reset loop from being triggered
due to h/w issues and enters the device into an unavailable state.
When user may cause the error, an unavailable state
will prevent the user from running its workloads.
The commit prevents entering consecutive state when a user context
is enabled.
habanalabs: add an option to control watchdog timeout via debugfs
Add an option to control the timeout value for the driver's watchdog
of the reset process. The timeout represents the amount of the user
has to close his process once he gets a device reset notification from
the driver.
Calling hl_device_reset() for a hard reset will lead to a quite
immediate device reset and to killing user process.
For resets that follow errors, it disables the option to debug the
errors on both the device side and the user application side.
This patch adds a 'graceful hard reset' option and a new
hl_device_cond_reset() function.
Under some conditions, mainly if there is no user process or if he is
not registered to driver notifications, this function will execute hard
reset as usual.
Otherwise, the reset will be postponed and a notification will be sent
to user, to let him perform post-error actions and then to release the
device, after which reset will take place.
If device is not released by user in some defined time, a watchdog work
will execute the reset in any case.
habanalabs: allow setting HBM BAR to other regions
Up until now the use-case in the driver was that the HBM is accessed
using the HBM BAR, yet the BAR sometimes cannot cover the whole HBM and
so we needed to set the BAR to other HBM offset.
Now we are facing the need to access other PCI memory regions that can
be covered by the HBM BAR.
To answer that we are allowing the caller to determine if the HBM BAR
need to be set or not regardless of the PCI memory region.
Added function to calculate possible engines which caused
RAZWI (read-only zero, write ignored), from a given router id or
module index.
When getting RAZWI via PSOC IP, first the router id is calculated
and then the possible engines that caused the RAZWI are calculated.
There is a possibility that the RAZWI initiator is not an engine. In
that case, it will not be included in possible engines as it
doesn't have an engine id.
RAZWI information is captured when receiving event from engine or via
PSOC IP.
habanalabs: move reset workqueue to be under hl_device
'struct hl_device_reset_work' is used as a wrapper for the reset work
and its parameters, including the reset workqueue on which it runs.
In a future commit, another reset related work with similar parameters
is going to be added, but it won't use the reset workqueue.
As in any case there is a single reset workqueue, and to allow the resue
of this structure, move the reset workqueue to 'struct hl_device'.
habanalabs: allow unregistering eventfd when device non-operational
Unregistering eventfd is for releasing host resources and doesn't
involve an access to the device. As such, there is no reason to disallow
it when device isn't operational.
habanalabs: skip idle status check if reset on device release
If reset upon device release is enabled, there is no need to check the
device idle status in hpriv_release(), because device is going to be
reset in any case.
Device unavailable notifies the user that there isn't an option to
retrieve debug information from the device.
When a critical device error occurs and the f/w performs the device
reset, a device unavailable notification shall be sent to the user
process.
Only the first page fault will be saved.
Besides the address which caused the page fault, the driver captures
all of the mmu user mappings.
User can retrieve this data via the new uapi (new opcode in INFO ioctl).
habanalabs/gaudi2: fix module ID for RAZWI handling
RAZWI is optionally handled as part of the generic QM SEI error
handling, but it always uses PDMA as the module ID.
Fix it to use the suitable module ID according to the specific event.
Linus Torvalds [Sun, 20 Nov 2022 23:31:20 +0000 (15:31 -0800)]
Merge tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
Linus Torvalds [Sun, 20 Nov 2022 23:25:32 +0000 (15:25 -0800)]
Merge tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
tracing: Fix race where eprobes can be called before the event
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Linus Torvalds [Sun, 20 Nov 2022 18:47:39 +0000 (10:47 -0800)]
Merge tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
Linus Torvalds [Sun, 20 Nov 2022 18:43:52 +0000 (10:43 -0800)]
Merge tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
Linus Torvalds [Sun, 20 Nov 2022 18:41:14 +0000 (10:41 -0800)]
Merge tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
Linus Torvalds [Sun, 20 Nov 2022 17:47:33 +0000 (09:47 -0800)]
Merge tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix writable sections being moved into the rodata region.
Thanks to Nicholas Piggin and Christophe Leroy.
* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix writable sections being moved into the rodata region
Linus Torvalds [Sat, 19 Nov 2022 23:51:22 +0000 (15:51 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
Linus Torvalds [Sat, 19 Nov 2022 17:08:57 +0000 (09:08 -0800)]
Merge tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Preset accessed bits in Intel VT-d page-directory entries to avoid
hardware error
- Set supervisor bit only when Intel IOMMU has the SRS capability
* tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Set SRE bit only when hardware has SRS cap
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
Linus Torvalds [Sat, 19 Nov 2022 17:03:20 +0000 (09:03 -0800)]
Merge tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
Linus Torvalds [Sat, 19 Nov 2022 16:58:58 +0000 (08:58 -0800)]
Merge tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- two missing and one incorrect return value checks
- fix leak on tlink mount failure
* tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add check for returning value of SMB2_set_info_init
cifs: Fix wrong return value checking when GETFLAGS
cifs: add check for returning value of SMB2_close_init
cifs: Fix connections leak when tlink setup failed
Tina Zhang [Wed, 16 Nov 2022 05:15:44 +0000 (13:15 +0800)]
iommu/vt-d: Set SRE bit only when hardware has SRS cap
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Tina Zhang [Wed, 16 Nov 2022 05:15:43 +0000 (13:15 +0800)]
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Linus Torvalds [Sat, 19 Nov 2022 01:56:29 +0000 (17:56 -0800)]
Merge tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for 8042 to stop leaking platform device on unload
- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
need to reset controller to load config from firmware
- a workaround for Acer Switch to avoid interrupt storm from home and
power buttons
- a workaround for more ASUS ZenBook models to detect keyboard
controller
- a fix for iforce driver to properly handle communication errors
- touchpad on HP Laptop 15-da3001TU switched to RMI mode
* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix leaking of platform device on module removal
Input: i8042 - apply probe defer to more ASUS ZenBook models
Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
Input: soc_button_array - add use_low_level_irq module parameter
Input: iforce - invert valid length check when fetching device IDs
Input: goodix - try resetting the controller when no config is set
dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
Linus Torvalds [Sat, 19 Nov 2022 01:17:42 +0000 (17:17 -0800)]
Merge tag 'zonefs-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix the IO error recovery path for failures happening in the last
zone of device, and that zone is a "runt" zone (smaller than the
other zone). The current code was failing to properly obtain a zone
report in that case.
- Remove the unused to_attr() function as it is unused, causing
compilation warnings with clang.
* tag 'zonefs-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Remove to_attr() helper function
zonefs: fix zone report size in __zonefs_io_error()
Chen Jun [Fri, 18 Nov 2022 23:40:03 +0000 (15:40 -0800)]
Input: i8042 - fix leaking of platform device on module removal
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
Linus Torvalds [Fri, 18 Nov 2022 22:59:53 +0000 (14:59 -0800)]
Merge tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
tweaks for the multishot handling for accept and receive.
All stable material"
* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
io_uring: disallow self-propelled ring polling
io_uring: fix multishot recv request leaks
io_uring: fix multishot accept request leaks
io_uring: fix tw losing poll events
io_uring: update res mask in io_poll_check_events
Linus Torvalds [Fri, 18 Nov 2022 22:31:03 +0000 (14:31 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a build error with CONFIG_CFI_CLANG + CONFIG_FTRACE when
CONFIG_FUNCTION_GRAPH_TRACER is not enabled.
- Fix a BUG_ON triggered by the page table checker due to incorrect
file_map_count for non-leaf pmd/pud (the arm64
pmd_user_accessible_page() not checking whether it's a leaf entry).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud
arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACER
Linus Torvalds [Fri, 18 Nov 2022 21:59:45 +0000 (13:59 -0800)]
Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
Linus Torvalds [Fri, 18 Nov 2022 21:31:40 +0000 (13:31 -0800)]
Merge tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I guess the main question is are things settling down, and I'd say
kinda, these are all pretty small fixes, nothing big stands out
really, just seems to be quite a few of them.
Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits.
core:
- Fix potential memory leak in drm_dev_init()
- Fix potential null-ptr-deref in drm_vblank_destroy_worker()
- Revert hiding unregistered connectors from userspace, as it breaks
on DP-MST
- Add workaround for DP++ dual mode adaptors that don't support i2c
subaddressing
i915:
- Fix uaf with lmem_userfault_list handling
amdgpu:
- gang submit fixes
- Fix a possible memory leak in ganng submit error path
- DP tunneling fixes
- DCN 3.1 page flip fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Don't expose degamma on hardware that doesn't support it
- BACO fixes for SMU 11.x
- BACO fixes for SMU 13.x
- Virtual display fix for devices with no display hardware
amdkfd:
- Memory limit regression fix
tegra:
- tegra20 GART fix
vc4:
- Fix error handling in vc4_atomic_commit_tail()
lima:
- Set lima's clkname corrrectly when regulator is missing
panel:
- Set bpc for logictechno panels"
* tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits)
gpu: host1x: Avoid trying to use GART on Tegra20
drm/display: Don't assume dual mode adaptors support i2c sub-addressing
drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround
drm/amd/pm: enable runpm support over BACO for SMU13.0.7
drm/amd/pm: enable runpm support over BACO for SMU13.0.0
drm/amdgpu: there is no vbios fb on devices with no display hw (v2)
drm/amdkfd: Fix a memory limit issue
drm/amdgpu: disable BACO support on more cards
drm/amd/display: don't enable DRM CRTC degamma property for DCE
drm/amd/display: Set max for prefetch lines on dcn32
drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
drm/amd/display: Fix prefetch calculations for dcn32
drm/amd/display: Fix optc2_configure warning on dcn314
drm/amd/display: Fix calculation for cursor CAB allocation
Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
drm/amd/display: Fix invalid DPIA AUX reply causing system hang
drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
drm/amd/display: Add HUBP surface flip interrupt handler
drm/amd/display: Fix access timeout to DPIA AUX at boot time
...
Linus Torvalds [Fri, 18 Nov 2022 20:30:23 +0000 (12:30 -0800)]
Merge tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix deadlock in discontiguous saved segments (DCSS) block device
driver. When adding a disk and scanning partitions the scan would not
break out early without a missed flag.
- Avoid using global register variable for current_stack_pointer due to
an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken
code is generated, which leads to stack corruptions.
* tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: avoid using global register for current_stack_pointer
s390/dcssblk: fix deadlock when adding a DCSS
Linus Torvalds [Fri, 18 Nov 2022 20:23:35 +0000 (12:23 -0800)]
Merge tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix misbehavior if list_versions DM ioctl races with module loading
- Fix missing decrement of no_sleep_enabled if dm_bufio_client_create
failed
- Allow DM integrity devices to be activated in read-only mode
* tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: clear the journal on suspend
dm integrity: flush the journal on suspend
dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
dm ioctl: fix misbehavior if list_versions races with module loading
Linus Torvalds [Fri, 18 Nov 2022 20:08:24 +0000 (12:08 -0800)]
Merge tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of USB driver fixes and new device ids for 6.1-rc6.
Included in here are:
- new usb-serial device ids
- dwc3 driver fixes for reported problems
- cdns3 driver fixes
- new USB device quirks
- typec driver fixes
- extcon USB typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add u-blox LARA-L6 modem
USB: serial: option: add u-blox LARA-R6 00B modem
USB: serial: option: remove old LARA-R6 PID
USB: serial: option: add Fibocom FM160 0x0111 composition
usb: add NO_LPM quirk for Realforce 87U Keyboard
usb: cdns3: host: fix endless superspeed hub port reset
usb: chipidea: fix deadlock in ci_otg_del_timer
usb: dwc3: Do not get extcon device when usb-role-switch is used
usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler
usb: typec: mux: Enter safe mode only when pins need to be reconfigured
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
Revert "usb: dwc3: disable USB core PHY management"
usb: dwc3: gadget: Return -ESHUTDOWN on ep disable
USB: bcma: Make GPIO explicitly optional
USB: serial: option: add Sierra Wireless EM9191
Since pmd_user_accessible_page() doesn't check if a pmd is leaf, it
decrease file_map_count for a non-leaf pmd comes from collapse_huge_page().
and so trigger BUG_ON() unexpectedly.
Fix this problem by using pmd_leaf() insteal of pmd_present() in
pmd_user_accessible_page(). Moreover, use pud_leaf() for
pud_user_accessible_page() too.
Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK") Reported-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20221117075602.2904324-2-liushixin2@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 18 Nov 2022 18:49:53 +0000 (10:49 -0800)]
Merge tag 'driver-core-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes for 6.1-rc6:
- utsname fix, this one should already be in your tree as it came
from a different tree earlier.
- kernfs bugfix for a much reported syzbot report that seems to keep
getting triggered.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: Fix spurious lockdep warning in kernfs_find_and_get_node_by_id()
kernel/utsname_sysctl.c: Add missing enum uts_proc value
Linus Torvalds [Fri, 18 Nov 2022 18:29:25 +0000 (10:29 -0800)]
Merge tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.1-rc6 to
resolve some reported problems. Included in here are:
- iio driver fixes
- binder driver fix
- nvmem driver fix
- vme_vmci information leak fix
- parport fix
- slimbus configuration fix
- coreboot firmware bugfix
- speakup build fix and crash fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
firmware: coreboot: Register bus in module init
nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env
slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
docs: update mediator contact information in CoC doc
slimbus: stream: correct presence rate frequencies
nvmem: lan9662-otp: Fix compatible string
binder: validate alloc->mm in ->mmap() handler
parport_pc: Avoid FIFO port location truncation
siox: fix possible memory leak in siox_device_add()
misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
speakup: replace utils' u_char with unsigned char
speakup: fix a segfault caused by switching consoles
tools: iio: iio_generic_buffer: Fix read size
iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
iio: adc: mp2629: fix potential array out of bound access
iio: adc: mp2629: fix wrong comparison of channel
iio: pressure: ms5611: changed hardcoded SPI speed to value limited
iio: pressure: ms5611: fixed value compensation bug
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
...
Linus Torvalds [Fri, 18 Nov 2022 17:52:10 +0000 (09:52 -0800)]
Merge tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1"
* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
ASoC: stm32: dfsdm: manage cb buffers cleanup
ASoC: sof_es8336: reduce pop noise on speaker
ASoC: SOF: topology: No need to assign core ID if token parsing failed
ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
ASoC: rt5677: fix legacy dai naming
ASoC: rt5514: fix legacy dai naming
ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
ASoC: tas2780: Fix set_tdm_slot in case of single slot
ASoC: tas2764: Fix set_tdm_slot in case of single slot
ASoC: tas2770: Fix set_tdm_slot in case of single slot
ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
ASoC: core: Fix use-after-free in snd_soc_exit()
MAINTAINERS: update Tzung-Bi's email address
ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
...
MMC host:
- sdhci-pci: Fix memory leak by adding a missing pci_dev_put()
- sdhci-pci-o2micro: Fix card detect by tuning the debounce timeout"
* tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()
mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout
mmc: core: properly select voltage range without power cycle
Pavel Begunkov [Fri, 18 Nov 2022 15:41:41 +0000 (15:41 +0000)]
io_uring: disallow self-propelled ring polling
When we post a CQE we wake all ring pollers as it normally should be.
However, if a CQE was generated by a multishot poll request targeting
its own ring, it'll wake that request up, which will make it to post
a new CQE, which will wake the request and so on until it exhausts all
CQ entries.
Don't allow multishot polling io_uring files but downgrade them to
oneshots, which was always stated as a correct behaviour that the
userspace should check for.
Mikulas Patocka [Tue, 15 Nov 2022 17:51:50 +0000 (12:51 -0500)]
dm integrity: clear the journal on suspend
There was a problem that a user burned a dm-integrity image on CDROM
and could not activate it because it had a non-empty journal.
Fix this problem by flushing the journal (done by the previous commit)
and clearing the journal (done by this commit). Once the journal is
cleared, dm-integrity won't attempt to replay it on the next
activation.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Mikulas Patocka [Tue, 15 Nov 2022 17:48:26 +0000 (12:48 -0500)]
dm integrity: flush the journal on suspend
This commit flushes the journal on suspend. It is prerequisite for the
next commit that enables activating dm integrity devices in read-only mode.
Note that we deliberately didn't flush the journal on suspend, so that the
journal replay code would be tested. However, the dm-integrity code is 5
years old now, so that journal replay is well-tested, and we can make this
change now.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Zhihao Cheng [Fri, 11 Nov 2022 12:10:27 +0000 (20:10 +0800)]
dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
The 'no_sleep_enabled' should be decreased in error handling path
in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag
is set, otherwise static_branch_unlikely() will always return true
even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP
flag set.
Cc: stable@vger.kernel.org Fixes: 3c1c875d0586 ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Mikulas Patocka [Tue, 1 Nov 2022 20:53:35 +0000 (16:53 -0400)]
dm ioctl: fix misbehavior if list_versions races with module loading
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".
Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Jens Axboe [Fri, 18 Nov 2022 14:47:54 +0000 (07:47 -0700)]
Merge tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme into block-6.1
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- memory leak fix in nvmet (Sagi Grimberg)"
* tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme:
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
Robin Murphy [Thu, 20 Oct 2022 14:23:40 +0000 (15:23 +0100)]
gpu: host1x: Avoid trying to use GART on Tegra20
Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avoid issues with the GPU driver expecting it to work in ways
that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration") that bodge no longer works, but really the
GPU driver should be responsible for its own behaviour anyway. Make the
workaround explicit.
Reported-by: Jon Hunter <jonathanh@nvidia.com> Suggested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Zheng Yejian [Mon, 14 Nov 2022 10:46:32 +0000 (18:46 +0800)]
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
Entries in list 'tr->err_log' will be reused after entry number
exceed TRACING_LOG_ERRS_MAX.
The cmd string of the to be reused entry will be freed first then
allocated a new one. If the allocation failed, then the entry will
still be in list 'tr->err_log' but its 'cmd' field is set to be NULL,
later access of 'cmd' is risky.
Currently above problem can cause the loss of 'cmd' information of first
entry in 'tr->err_log'. When execute `cat /sys/kernel/tracing/error_log`,
reproduce logs like:
[ 37.495100] trace_kprobe: error: Maxactive is not for kprobe(null) ^
[ 38.412517] trace_kprobe: error: Maxactive is not for kprobe
Command: p4:myprobe2 do_sys_openat2
^
tracing/eprobe: Fix eprobe filter to make a filter correctly
Since the eprobe filter was defined based on the eprobe's trace event
itself, it doesn't work correctly. Use the original trace event of
the eprobe when making the filter so that the filter works correctly.
Without this fix:
# echo 'e syscalls/sys_enter_openat \
flags_rename=$flags:u32 if flags < 1000' >> dynamic_events
# echo 1 > events/eprobes/sys_enter_openat/enable
[ 114.551550] event trace: Could not enable event sys_enter_openat
-bash: echo: write error: Invalid argument
With this fix:
# echo 'e syscalls/sys_enter_openat \
flags_rename=$flags:u32 if flags < 1000' >> dynamic_events
# echo 1 > events/eprobes/sys_enter_openat/enable
# tail trace
cat-241 [000] ...1. 266.498449: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0
cat-242 [000] ...1. 266.977640: sys_enter_openat: (syscalls.sys_enter_openat) flags_rename=0
Rafael Mendonca [Fri, 18 Nov 2022 01:15:34 +0000 (10:15 +0900)]
tracing/eprobe: Fix warning in filter creation
The filter pointer (filterp) passed to create_filter() function must be a
pointer that references a NULL pointer, otherwise, we get a warning when
adding a filter option to the event probe:
projects / thirdparty / kernel / linux.git / log
