Junio C Hamano [Tue, 12 Oct 2021 20:51:44 +0000 (13:51 -0700)]
Merge branch 'jc/trivial-threeway-binary-merge' into maint
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Junio C Hamano [Tue, 12 Oct 2021 20:51:43 +0000 (13:51 -0700)]
Merge branch 'mh/send-email-reset-in-reply-to' into maint
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
Junio C Hamano [Tue, 12 Oct 2021 20:51:42 +0000 (13:51 -0700)]
Merge branch 'sg/set-ceiling-during-tests' into maint
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
Junio C Hamano [Tue, 12 Oct 2021 20:51:41 +0000 (13:51 -0700)]
Merge branch 'cb/makefile-apple-clang' into maint
Build update for Apple clang.
* cb/makefile-apple-clang:
build: catch clang that identifies itself as "$VENDOR clang"
build: clang version may not be followed by extra words
build: update detect-compiler for newer Xcode version
Junio C Hamano [Tue, 12 Oct 2021 20:51:39 +0000 (13:51 -0700)]
Merge branch 'pw/rebase-r-fixes' into maint
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Junio C Hamano [Tue, 12 Oct 2021 20:51:39 +0000 (13:51 -0700)]
Merge branch 'pw/rebase-skip-final-fix' into maint
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
Junio C Hamano [Tue, 12 Oct 2021 20:51:38 +0000 (13:51 -0700)]
Merge branch 'jk/range-diff-fixes' into maint
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
Junio C Hamano [Tue, 12 Oct 2021 20:51:36 +0000 (13:51 -0700)]
Merge branch 'en/pull-conflicting-options' into maint
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Junio C Hamano [Tue, 12 Oct 2021 20:51:36 +0000 (13:51 -0700)]
Merge branch 'jt/push-negotiation-fixes' into maint
Bugfix for common ancestor negotiation recently introduced in "git
push" codepath.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
Junio C Hamano [Tue, 12 Oct 2021 20:51:27 +0000 (13:51 -0700)]
Merge branch 'js/maintenance-launchctl-fix' into maint
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
Junio C Hamano [Tue, 12 Oct 2021 20:51:24 +0000 (13:51 -0700)]
Merge branch 'fc/completion-updates' into maint
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Junio C Hamano [Tue, 12 Oct 2021 20:51:22 +0000 (13:51 -0700)]
Merge branch 'en/merge-strategy-docs' into maint
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
9af0b8dbe2 (t0000-basic: more commit-tree tests., 2006-04-26) adds
tests for commit-tree that mask the return exit from git as described
in a378fee5b07 (Documentation: add shell guidelines, 2018-10-05).
Fix the tests, to avoid pipes by using a temporary file instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
b8ba412bf7 (tree-diff: avoid alloca for large allocations, 2016-06-07)
adds a way to route some bigger allocations out of the stack and free
them through the addition of two conveniently named macros, but leaves
the calls to free the xalloca part, which could be also in the heap,
if the system doesn't HAVE_ALLOCA_H (ex: macOS and other BSD).
Add the missing free call, xalloca_free(), which is a noop if we
allocated memory in the stack frame, but a real free() if we
allocated in the heap instead, and while at it, change the expression
to match in both macros for ease of readability.
This avoids a leak reported by LSAN while running t0000 but that
wouldn't fail the test (which is fixed in the next patch):
SUMMARY: LeakSanitizer: 1034 byte(s) leaked in 15 allocation(s).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
documentation: add documentation for 'git version'
While 'git version' is probably the least complex git command,
it is a non-experimental user-facing builtin command. As such
it should have a help page.
Both `git help` and `git version` can be called as options
(`--help`/`--version`) that internally get converted to the
corresponding command. Add a small paragraph to
Documentation/git.txt describing how these two options
interact with each other and link to this help page for the
sub-options that `--version` can take. Well, currently there
is only one sub-option, but that could potentially increase
in future versions of Git.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 13 Sep 2021 21:23:05 +0000 (22:23 +0100)]
doc: config, tell readers of `git help --config`
The `git help` command gained the ability to list config variables in 3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 11:45:43 +0000 (13:45 +0200)]
compression: drop write-only core_compression_* variables
Since 8de7eeb54b (compression: unify pack.compression configuration
parsing, 2016-11-15) the variables core_compression_level and
core_compression_seen are only set, but never read. Remove them.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Sep 2021 22:57:57 +0000 (18:57 -0400)]
t5562: use alarm() to interrupt timed child-wait
The t5562 script occasionally takes 60 extra seconds to complete due to
a race condition in the invoke-with-content-length.pl helper.
The way it's supposed to work is this:
- we set up a SIGCLD handler
- we kick off http-backend and write to it with a set content-length,
but _don't_ close the pipe
- we sleep for 60 seconds, assuming that SIGCLD from http-backend
finishing will interrupt us
- after the sleep finishes (whetherby 60 seconds or because it was
interrupted by the signal), we check a flag to see if our SIGCLD
handler was called. If not, then we complain.
This usually completes immediately, because the signal interrupts our
sleep. But very occasionally the child process dies _before_ we hit the
sleep, so we don't realize it. The test still completes successfully
(because our $exited flag is set), but it takes an extra 60 seconds.
There's no way to check the flag and sleep atomically. So the best we
can do with this approach is to sleep in smaller chunks (say, 1 second)
and check the flag incrementally. Then we waste a maximum of 1 second if
we lose the race. This was proposed in:
Instead of blocking on sleep and waiting for the child signal to
interrupt us, we can block on the child exiting and set an alarm signal
to trigger the timeout.
This lets us exit the script immediately when the child behaves (with no
race possible), and wait a maximum of 60 seconds when it doesn't.
Note one small subtlety: perl is very willing to restart the waitpid()
call after the alarm is delivered, even if we've thrown an exception via
die. "perldoc -f alarm" claims you can get around this with an eval/die
combo (and even has some example code), but it doesn't seem to work for
me with waitpid(); instead, we continue waiting until the child exits.
So instead, we'll instruct the child process to exit in the alarm
handler itself. In the original code this was done by calling
close($out). That would continue to work, since our child is always
http-backend, which should exit when its stdin closes. But we can be
even more robust against a hung or confused child by sending a KILL
signal, which should terminate it immediately.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 9 Sep 2021 21:45:29 +0000 (23:45 +0200)]
setup: use xopen and xdup in sanitize_stdfds
Replace the catch-all error message with specific ones for opening and
duplicating by calling the wrappers xopen and xdup. The code becomes
easier to follow when error handling is reduced to two letters.
Remove the unnecessary mode parameter while at it -- we expect /dev/null
to already exist.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-write: skip *.rev work when not writing *.rev
Fix a performance regression introduced in a587b5a786 (pack-write.c:
extract 'write_rev_file_order', 2021-03-30) and stop needlessly
allocating the "pack_order" array and sorting it with
"pack_order_cmp()", only to throw that work away when we discover that
we're not writing *.rev files after all.
This redundant work was not present in the original version of this
code added in 8ef50d9958 (pack-write.c: prepare to write 'pack-*.rev'
files, 2021-01-25). There we'd call write_rev_file() from
e.g. finish_tmp_packfile(), but we'd "return NULL" early in
write_rev_file() if not doing a "WRITE_REV" or "WRITE_REV_VERIFY".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Sep 2021 22:10:22 +0000 (15:10 -0700)]
hash-object: prefix_filename() returns allocated memory these days
Back when a1be47e4 (hash-object: fix buffer reuse with --path in a
subdirectory, 2017-03-20) was written, the prefix_filename() helper
used a static piece of memory to the caller, making the caller
responsible for copying it, if it wants to keep it across another
call to the same function. Two callers of the prefix_filename() in
hash-object were made to xstrdup() the value obtained from it.
But in the same series, when e4da43b1 (prefix_filename: return newly
allocated string, 2017-03-20) changed the rule to gave the caller
possession of the memory, we forgot to revert one of the xstrdup()
changes, allowing the returned value to leak.
This script was added in f28ac70f48 (Move all dashed-form commands to
libexecdir, 2007-11-28) when commands such as "git-add" lived in the
bin directory, instead of the git exec directory.
This notice helped someone incorrectly installing version v1.6.0 and
later into a directory built for a pre-v1.6.0 git version.
We're now long past the point where anyone who'd be helped by this
warning is likely to be doing that, so let's just remove this check
and warning to simplify the Makefile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: fix a "first config key wins" regression in v2.33.0
Fix a regression in my c95e3a3f0b8 (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128e (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org> Tested-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 4 Sep 2021 07:50:58 +0000 (09:50 +0200)]
range-diff: avoid segfault with -I
output() reuses the same struct diff_options for multiple calls of
diff_flush(). Set the option no_free to instruct it to keep the
ignore regexes between calls and release them explicitly at the end.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes 19b2517f (diff-merges: move specific diff-index "-m"
handling to diff-index, 2021-05-21).
That commit disabled handling of all diff for merges options in
diff-index on an assumption that they are unused. However, it later
appeared that -c and --cc, even though undocumented and not being
covered by tests, happen to have had particular effect on diff-index
output.
Restore original -c/--cc options handling by diff-index.
Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 5 Sep 2021 19:06:57 +0000 (12:06 -0700)]
apply: resolve trivial merge without hitting ll-merge with "--3way"
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch] Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote: avoid -Wunused-but-set-variable in gcc with -DNDEBUG
In make_remote(), we store the return value of hashmap_put() and check
it using assert(), but don't otherwise use it. If Git is compiled with
NDEBUG, then the assert() becomes a noop, and nobody looks at the
variable at all. This causes some compilers to produce warnings.
Let's switch it instead to a BUG(). This accomplishes the same thing,
but is always compiled in (and we don't have to worry about the cost;
the check is cheap, and this is not a hot code path).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the trailing dot from the warning we emit about gc.log. It's
common for various terminal UX's to allow the user to select "words",
and by including the trailing dot a user wanting to select the path to
gc.log will need to manually remove the trailing dot.
Such a user would also probably need to adjust the path if it e.g. had
spaces in it, but this should address this very common case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Suggested-by: Jan Judas <snugar.i@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kim Altintop [Fri, 13 Aug 2021 06:23:54 +0000 (06:23 +0000)]
docs: clarify the interaction of transfer.hideRefs and namespaces
Expand the section about namespaces in the documentation of
`transfer.hideRefs` to point out the subtle differences between
`upload-pack` and `receive-pack`.
ffcfb68176 (upload-pack.c: treat want-ref relative to namespace,
2021-07-30) taught `upload-pack` to reject `want-ref`s for hidden refs,
which is now mentioned. It is clarified that at no point the name of a
hidden ref is revealed, but the object id it points to may.
Signed-off-by: Kim Altintop <kim@eagain.st> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kim Altintop [Fri, 13 Aug 2021 06:23:50 +0000 (06:23 +0000)]
upload-pack.c: treat want-ref relative to namespace
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Kim Altintop <kim@eagain.st> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kim Altintop [Fri, 13 Aug 2021 06:23:40 +0000 (06:23 +0000)]
t5730: introduce fetch command helper
Assembling a "raw" fetch command to be fed directly to "test-tool serve-v2"
is extracted into a test helper.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Kim Altintop <kim@eagain.st> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap.c: fix a memory leak in free_mailap_{info,entry}()
In the free_mailmap_entry() code added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) the intent was clearly to
clear the "me" structure, but while we freed parts of the
mailmap_entry structure, we didn't free the structure itself. The same
goes for the "mailmap_info" structure.
This brings the number of SANITIZE=leak failures in t4203-mailmap.sh
down from 50 to 49. Not really progress as far as the number of
failures is concerned, but as far as I can tell this fixes all leaks
in mailmap.c itself. There's still users of it such as builtin/log.c
that call read_mailmap() without a clear_mailmap(), but that's on
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tal Kelrich [Tue, 31 Aug 2021 15:55:54 +0000 (15:55 +0000)]
fast-export: fix anonymized tag using original length
Commit 7f4075949686 (fast-export: tighten anonymize_mem() interface to
handle only strings, 2020-06-23) changed the interface used in anonymizing
strings, but failed to update the size of annotated tag messages to match
the new anonymized string.
As a result, exporting tags having messages longer than 13 characters
would create output that couldn't be parsed by fast-import,
as the data length indicated was larger than the data output.
Reset the message size when anonymizing, and add a tag with a "long"
message to the test.
Signed-off-by: Tal Kelrich <hasturkun@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in a2ba162cda (object-info: support for retrieving
object info, 2021-04-20) which appears to have been based on a
misunderstanding of how the pkt-line.c API works. There is no need to
strdup() input to packet_writer_write(), it's just a printf()-like
format function.
This fixes a potentially large memory leak, since the number of OID
lines the "object-info" call can be arbitrarily large (or a small one
if the request is small).
This makes t5701-git-serve.sh pass again under SANITIZE=leak, as it
did before a2ba162cda2.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Bruno Albuquerque <bga@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marvin Häuser [Mon, 30 Aug 2021 15:30:01 +0000 (15:30 +0000)]
send-email: avoid incorrect header propagation
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Marvin Häuser <mhaeuser@posteo.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 29 Aug 2021 09:25:36 +0000 (11:25 +0200)]
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 16 Aug 2021 17:48:55 +0000 (17:48 +0000)]
sparse-index: copy dir_hash in ensure_full_index()
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Fri, 27 Aug 2021 18:35:35 +0000 (20:35 +0200)]
branch: allow deleting dangling branches with --force
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 Aug 2021 18:32:06 +0000 (14:32 -0400)]
docs: use "character encoding" to refer to commit-object encoding
The word "encoding" can mean a lot of things (e.g., base64 or
quoted-printable encoding in emails, HTML entities, URL encoding, and so
on). The documentation for i18n.commitEncoding and i18n.logOutputEncoding
uses the phrase "character encoding" to make this more clear.
Let's use that phrase in other places to make it clear what kind of
encoding we are talking about. This patch covers the gui.encoding
option, as well as the --encoding option for git-log, etc (in this
latter case, I word-smithed the sentence a little at the same time).
That, coupled with the mention of iconv in the --encoding description,
should make this more clear.
The other spot I looked at is the working-tree-encoding section of
gitattributes(5). But it gives specific examples of encodings that I
think make the meaning pretty clear already.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 27 Aug 2021 18:30:15 +0000 (14:30 -0400)]
logmsg_reencode(): warn when iconv() fails
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Thu, 26 Aug 2021 19:10:06 +0000 (16:10 -0300)]
checkout: make delayed checkout respect --quiet and --no-progress
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
