Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take
into account that irq_of_parse_and_map() and platform_get_irq() have a
different way of indicating an error: the former returns 0 and the latter
returns a negative error code. Fix up the IRQ checks!
Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()") Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sergey Shtylyov [Mon, 29 Mar 2021 20:50:58 +0000 (23:50 +0300)]
scsi: ufs: ufshcd-pltfrm: Fix deferred probing
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream as it should have been done from the start...
Ye Bin [Fri, 9 Apr 2021 07:55:22 +0000 (15:55 +0800)]
scsi: ufs: ufs-qcom: Remove redundant dev_err() call in ufs_qcom_init()
There is a error message within devm_ioremap_resource() already, so remove
the dev_err() call to avoid redundant error message.
Link: https://lore.kernel.org/r/20210409075522.2111083-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Tue, 6 Apr 2021 11:48:30 +0000 (19:48 +0800)]
scsi: hisi_sas: Warn in v3 hw channel interrupt handler when status reg cleared
If a channel interrupt occurs without any status bit set, the handler will
return directly. However, if such redundant interrupts are received, it's
better to check what happen, so add logs for this.
scsi: hisi_sas: Call sas_unregister_ha() to roll back if .hw_init() fails
Function sas_unregister_ha() needs to be called to roll back if
hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or
hisi_sas_v3_probe(). Make that change.
Colin Ian King [Wed, 7 Apr 2021 13:58:40 +0000 (14:58 +0100)]
scsi: pm80xx: Fix potential infinite loop
The for-loop iterates with a u8 loop counter i and compares this with the
loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a
potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop
counter. Fix this by making the loop counter the same type as
pm8001_ha->max_q_num.
[mkp: this is purely theoretical, max_q_num is currently limited to 64]
Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure")
Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There was a similar fix for mpi_init_check() in commit d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check")
Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Igor Pylypiv [Tue, 6 Apr 2021 18:05:33 +0000 (11:05 -0700)]
scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()
The mpi_uninit_check() takes longer for inbound doorbell register to be
cleared. Increase the timeout substantially so that the driver does not
fail to load.
Previously, the inbound doorbell wait time was mistakenly increased in the
mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the
mpi_init_check() wait time as-is as these are timeout values and if there
is a failure, waiting longer is not an issue.
Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bodo Stroesser [Wed, 24 Mar 2021 19:57:57 +0000 (20:57 +0100)]
scsi: target: tcmu: Replace block size definitions with new udev members
Replace DATA_PAGES_PER_BLK and DATA_BLOCK_SIZE with new struct elements
tcmu_dev->data_pages_per_blk and tcmu_dev->data_blk_size. These new
variables are still loaded with constant definition DATA_PAGES_PER_BLK_DEF
(= 1) and DATA_PAGES_PER_BLK_DEF * PAGE_SIZE.
There is no way yet to set the values via configfs.
Bodo Stroesser [Wed, 24 Mar 2021 19:57:55 +0000 (20:57 +0100)]
scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE
Change tcmu to support DATA_BLOCK_SIZE being a multiple of PAGE_SIZE. There
are two reasons why one would like to have a bigger DATA_BLOCK_SIZE:
1) If userspace - e.g. due to data compression, encryption or
deduplication - needs to have receive or transmit data in a consecutive
buffer, we can define DATA_BLOCK_SIZE to the maximum size of a SCSI
READ/WRITE to enforce that userspace sees just one consecutive
buffer. That way we can avoid the need for doing data copy in
userspace.
2) Using a bigger data block size can speed up command processing in
tcmu. The number of free data blocks to look up in bitmap is reduced
substantially. The lookup for data pages in radix_tree can be done more
efficiently if there are multiple pages in a data block. The maximum
number of IOVs to set up is lower so cmd entries in the ring become
smaller.
Bodo Stroesser [Wed, 24 Mar 2021 19:57:54 +0000 (20:57 +0100)]
scsi: target: tcmu: Prepare for PAGE_SIZE != DATA_BLOCK_SIZE
Rename some variables and definitions as a first preparation for
DATA_BLOCK_SIZE != PAGE_SIZE and add the new DATA_PAGES_PER_BLK definition
containing the number of pages per data block.
Rename tcmu_try_get_block_page() to tcmu_try_get_data_page(). Keep name
tcmu_get_block_page() since it will go away in a following commit when
there is only one caller left. Subsequent commits will then add full
support for DATA_PAGES_PER_BLK != 1, which also means DATA_BLOCK_SIZE =
DATA_PAGES_PER_BLK * PAGE_SIZE
Bodo Stroesser [Wed, 24 Mar 2021 19:57:53 +0000 (20:57 +0100)]
scsi: target: tcmu: Adjust names of variables and definitions
Some definitions and members of struct tcmu_dev had misleading
names. Examples:
- ring_size was used for the size of mailbox + cmd ring + data area
- CMDR_SIZE was used for size of mailbox + cmd ring
I added the new definition MB_CMDR_SIZE (mailbox + command ring), changed
CMDR_SIZE to hold the size of the command ring only and replaced in struct
tcmu_dev the member ring_size with mmap_pages, because the member is now
used in tcmu_mmap() only, where we need page count, not size.
I also added the new struct tcmu_dev member 'cmdr' which is used to replace
some occurences of '(void *)mb + CMDR_OFF' with 'udev->cmdr' for better
readability.
scsi: ufs: core: Fix out-of-bounds warnings in ufshcd_exec_raw_upiu_cmd()
Fix the following out-of-bounds warnings by enclosing some structure
members into new structure objects upiu_req and upiu_rsp:
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds]
arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds]
arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds]
Refactor the code by making it more structured.
The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). Now
that a new struct _upiu_req_ enclosing all those adjacent members is
introduced, memcpy() doesn't overrun the length of &treq.req_header,
because the address of the new struct object _upiu_req_ is used as the
destination, instead. The same problem is present when memcpy() overruns
the length of the source &treq.rsp_header; in this case the address of the
new struct object _upiu_rsp_ is used, instead.
Also, this helps with the ongoing efforts to enable -Warray-bounds and
avoid confusing the compiler.
Sreekanth Reddy [Tue, 30 Mar 2021 10:51:37 +0000 (16:21 +0530)]
scsi: mpt3sas: Block PCI config access from userspace during reset
While diag reset is in progress there is short duration where all access to
controller's PCI config space from the host needs to be blocked. This is
due to a hardware limitation of the IOC controllers.
Block all access to controller's config space from userland applications by
calling pci_cfg_access_lock() while diag reset is in progress and unlocking
it again after the controller comes back to ready state.
Sreekanth Reddy [Tue, 30 Mar 2021 10:50:04 +0000 (16:20 +0530)]
scsi: mpt3sas: Only one vSES is present even when IOC has multi vSES
Whenever the driver is adding a vSES to virtual-phys list it is
reinitializing the list head. Hence those vSES devices which were added
previously are lost.
Stop reinitializing the list every time a new vSES device is added.
Create the device for the virtual LUN 0 using the DUMMY flag. This change
makes it possible to remove some special-casing in the INQUIRY code.
Link: https://lore.kernel.org/r/20210322200938.53300-3-k.shelekhin@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit adds the DUMMY flag to the rd_mcp backend that forces a logical
unit to report itself as not connected device of an unknown type.
Essentially this allows users to create devices identical to the device for
the virtual LUN 0, making it possible to explicitly create a LUN 0 device
and configure its WWNs (e.g. vendor or product name).
Link: https://lore.kernel.org/r/20210322200938.53300-2-k.shelekhin@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Pittman [Wed, 31 Mar 2021 18:16:56 +0000 (14:16 -0400)]
scsi: scsi_dh_alua: Prevent duplicate pg info print in alua_rtpg()
Due to the frequency that alua_rtpg() is called, the path group info print
within can print the same info multiple times in the logs, subsequent
prints adding no new information or value.
To fix, check stored values, only printing at alua attach/activate and if
any of the values change.
Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.com Reviewed-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin Wilck [Thu, 1 Apr 2021 09:11:05 +0000 (11:11 +0200)]
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the
SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with
srp_reconnect_work(), a warning is printed:
Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18.
Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------
Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22
Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace:
Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90
Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp]
Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp]
Avoid this by not trying to block targets for rports in SRP_PORT_LOST
state.
Roman Bolshakov [Sat, 3 Apr 2021 21:54:15 +0000 (00:54 +0300)]
scsi: target: iscsi: Fix zero tag inside a trace event
target_sequencer_start event is triggered inside target_cmd_init_cdb().
se_cmd.tag is not initialized with ITT at the moment so the event always
prints zero tag.
Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:17:54 +0000 (14:17 -0600)]
scsi: smartpqi: Update version to 2.1.8-045
Update version.
Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:48 +0000 (14:17 -0600)]
scsi: smartpqi: Add new PCI IDs
Add support for newer hardware.
Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:42 +0000 (14:17 -0600)]
scsi: smartpqi: Correct system hangs when resuming from hibernation
Correct system hangs when resuming from hibernation after first successful
hibernation/resume cycle. Rare condition involving OFA.
Note: Suspend/resume is not supported on many platforms. It was originally
intended for workstations.
Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Thu, 11 Mar 2021 20:17:37 +0000 (14:17 -0600)]
scsi: smartpqi: Update enclosure identifier in sysfs
Update enclosure identifier field corresponding to physical devices in
lsscsi/sysfs.
During device add the SCSI devtype is filled in during slave_configure().
However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns
zero for the SCSI devtype field, and valid devtype is overwritten by
zero. Due to this, lsscsi output shows wrong values.
Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:31 +0000 (14:17 -0600)]
scsi: smartpqi: Add additional logging for LUN resets
LUN resets can take longer to complete. Adding in more driver logging helps
show where the driver is in the reset process.
Add a timeout in pqi_device_wait_for_pending_io() to cap how long the
driver will wait for outstanding commands.
Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhilda Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Thu, 11 Mar 2021 20:17:25 +0000 (14:17 -0600)]
scsi: smartpqi: Update SAS initiator_port_protocols and target_port_protocols
Export valid sas initiator_port_protocols and target_port_protocols to
sysfs. Needed for lsscsi to show correct values.
Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Thu, 11 Mar 2021 20:17:19 +0000 (14:17 -0600)]
scsi: smartpqi: Add phy ID support for the physical drives
Display topology using PHY numbers. PHY (both local and remote) numbers
corresponding to physical drives are read from
BMIC_IDENTIFY_PHYSICAL_DEVICE.
Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:13 +0000 (14:17 -0600)]
scsi: smartpqi: Convert snprintf() to scnprintf()
The entire Linux kernel has been slowly migrating from snprintf() to
scnprintf(), so we are doing our part. This article explains the rationale
for this change:
https: //lwn.net/Articles/69419/
Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:07 +0000 (14:17 -0600)]
scsi: smartpqi: Fix driver synchronization issues
- Synchronize OFA and controller offline events. Prevent I/O during the
above conditions.
- Cleanup pqi_device_wait_for_pending_io() by checking the
device->scsi_cmds_outstanding instead of walking the device's list of
commands.
- Stop failing all I/O for all devices. This was causing OS to retry them,
delaying OFA.
- Clean up cache flush. The controller is checked for offline status in
lower level functions.
Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:17:01 +0000 (14:17 -0600)]
scsi: smartpqi: Update device scan operations
Change return type from EINPROGRESS to EBUSY to signal applications to
retry a REGNEWD if the driver cannot process the REGNEWD. Events such as
OFA, suspend, and shutdown return EINPROGRESS if a scan is currently
running. This prevents applications from immediately retrying REGNEWD.
Schedule a new REGNEWD if system low on memory.
Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:55 +0000 (14:16 -0600)]
scsi: smartpqi: Update OFA management
OFA, Online Firmware Activation, allows users to update firmware without a
reboot.
- Change OFA setup to a worker thread
- Delay soft resets
- Add OFA event handler to allow FW to initiate OFA
- Add in-memory allocation to OFA events
- Update OFA buffer size calculations
- Add ability to cancel OFA events
- Update OFA quiesce/un-quiesce
- Prevent Kernel crashes while issuing ioctl during OFA
- Returned EBUSY for pass-through IOCTLs throughout all stages of OFA
- Add mutex to prevent parallel OFA updates.
Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:49 +0000 (14:16 -0600)]
scsi: smartpqi: Update RAID bypass handling
Simplify AIO retry management by removing retry list and list
management. Need to retry is already set in the response status. Also
remove the bypass worker thread.
Accelerated I/O requests bypass the RAID engine and go directly to either
an HBA disk or to a physical component of a RAID volume.
Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:44 +0000 (14:16 -0600)]
scsi: smartpqi: Update suspend/resume and shutdown
For suspend/resume and shutdown prevent: Controller events, any new I/O
requests, controller requests, REGNEWD, and reset operations.
Wait for any pending completions from the controller to complete to avoid
controller NMI events.
Link: https://lore.kernel.org/r/161549380398.25025.12266769502766103580.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:38 +0000 (14:16 -0600)]
scsi: smartpqi: Synchronize device resets with mutex
Remove some flags used to check for device resets already in
progress. Allow only 1 reset operation at a time for the host.
Link: https://lore.kernel.org/r/161549379810.25025.10194117431886743795.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:32 +0000 (14:16 -0600)]
scsi: smartpqi: Update soft reset management for OFA
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows
controller firmware updates without a reboot.
OFA updates require an on-line controller reset to activate the updated
firmware. There were some missing actions for some of the reset cases. The
controller is first set back to sis mode before returning to pqi mode.
Check to ensure the controller is in sis mode.
Release QRM memory (OFA buffer) on OFA error conditions. Clean up
controller state which can cause a kernel panic upon reboot after an
unsuccessful OFA.
Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:26 +0000 (14:16 -0600)]
scsi: smartpqi: Update event handler
Change the data types for event_id and additional_event_id.
Link: https://lore.kernel.org/r/161549378628.25025.14338046567871170916.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:20 +0000 (14:16 -0600)]
scsi: smartpqi: Add support for wwid
WWID has been added to Report Physical LUNs in newer controller
firmware. The presence of this field is detected by a feature bit. Add
detection of this new feature and store the WWID when set.
Link: https://lore.kernel.org/r/161549378041.25025.3869709982357729841.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:14 +0000 (14:16 -0600)]
scsi: smartpqi: Remove timeouts from internal cmds
Remove timeouts for driver-initiated commands. Responses to internal
requests can take longer than hard coded timeout values and the driver will
still have an outstanding request that may complete in the future with no
context.
Link: https://lore.kernel.org/r/161549377451.25025.12306492868851801623.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:16:08 +0000 (14:16 -0600)]
scsi: smartpqi: Disable WRITE SAME for HBA NVMe disks
Controller does not support SCSI WRITE SAME for NVMe drives in HBA mode
Link: https://lore.kernel.org/r/161549376866.25025.5961694654342018260.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current stream detection:
cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
1
Turn off stream detection:
echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Turn on stream detection:
echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:15:56 +0000 (14:15 -0600)]
scsi: smartpqi: Add stream detection
Enhance performance by adding sequential stream detection for RAID5/RAID6
sequential write requests. Reduce stripe lock contention with full-stripe
write operations.
There is one common stripe lock for each RAID volume that can be set by
either the RAID engine or the AIO engine. The AIO path has I/O request
sizes well below the stripe size resulting in many Read-Modify-Write
operations.
Sending the request to the RAID engine allows for coalescing requests into
full stripe operations resulting in reduced Read-Modify-Write operations.
Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:15:50 +0000 (14:15 -0600)]
scsi: smartpqi: Align code with oob driver
Reduce differences between out-of-box driver and kernel.org driver. No
functional changes.
Link: https://lore.kernel.org/r/161549375094.25025.9268879575316758510.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:15:45 +0000 (14:15 -0600)]
scsi: smartpqi: Add support for long firmware version
Add support for new "long" firmware version which requires minor driver
changes to expose.
Link: https://lore.kernel.org/r/161549374508.25025.15467221395888158022.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:15:39 +0000 (14:15 -0600)]
scsi: smartpqi: Add support for BMIC sense feature cmd and feature bits
Determine support for supported features from BMIC sense feature command
instead of config table. Enable features such as: RAID 1/5/6 write
support, SATA wwid, and encryption.
Link: https://lore.kernel.org/r/161549373914.25025.7999816178098103135.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:15:33 +0000 (14:15 -0600)]
scsi: smartpqi: Add support for RAID1 writes
Add RAID1 write IU and implement RAID1 write support. Change brand names
ADM/ADG to TRIPLE/RAID-6.
Link: https://lore.kernel.org/r/161549373324.25025.2441592111049564780.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:15:27 +0000 (14:15 -0600)]
scsi: smartpqi: Add support for RAID5 and RAID6 writes
Add in new IU definition and implement support for RAID5 and RAID6 writes.
Link: https://lore.kernel.org/r/161549372734.25025.963261942897080281.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:15:21 +0000 (14:15 -0600)]
scsi: smartpqi: Refactor scatterlist code
Factor out code common to all scatter-gather list building to prepare for
new AIO functionality. AIO (Accelerated I/O) requests go directly to disk
No functional changes.
Link: https://lore.kernel.org/r/161549372147.25025.9706613054649682229.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:15:15 +0000 (14:15 -0600)]
scsi: smartpqi: Refactor aio submission code
Refactor aio submission code:
1. Break up function pqi_raid_bypass_submit_scsi_cmd()
into smaller functions.
2. Add common block (rmd - raid_map_data) to carry around into newly
added functions.
3. Prepare for new AIO functionality.
No functional changes.
Link: https://lore.kernel.org/r/161549371553.25025.8840958689316611074.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Thu, 11 Mar 2021 20:15:09 +0000 (14:15 -0600)]
scsi: smartpqi: Add support for new product ids
Add support for newer hardware by adding in a product identifier. This
identifier can then be used to check for the hardware generation.
Link: https://lore.kernel.org/r/161549370966.25025.2968242206975557607.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Thu, 11 Mar 2021 20:15:03 +0000 (14:15 -0600)]
scsi: smartpqi: Correct request leakage during reset operations
While failing queued I/Os in TMF path, there was a request leak and hence
stale entries in request pool with ref count being non-zero. In shutdown
path we have a BUG_ON to catch stuck I/O either in firmware or in the
driver. The stale requests caused a system crash. The I/O request pool
leakage also lead to a significant performance drop.
Link: https://lore.kernel.org/r/161549370379.25025.12793264112620796062.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Thu, 11 Mar 2021 20:14:57 +0000 (14:14 -0600)]
scsi: smartpqi: Use host-wide tag space
Correct SCSI midlayer sending more requests than exposed host queue depth
causing firmware ASSERT and lockup issues by enabling host-wide tags.
Note: This also results in better performance.
Link: https://lore.kernel.org/r/161549369787.25025.8975999483518581619.stgit@brunhilda Suggested-by: Ming Lei <ming.lei@redhat.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()),
but since blk_mq_tagset_busy_iter() only iterates over all reserved tags
and requests which are not in IDLE state, ufshcd_compl_tm() never gets a
chance to run. Thus, TMR always ends up with completion timeout. Fix it by
calling blk_mq_start_request() in __ufshcd_issue_tm_cmd().
Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: message: mptlan: Replace one-element array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in struct
_SGE_TRANSACTION32 instead of one-element array.
Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:
CC [M] drivers/message/fusion/mptlan.o
drivers/message/fusion/mptlan.c: In function ‘mpt_lan_sdu_send’:
drivers/message/fusion/mptlan.c:759:28: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
759 | pTrans->TransactionDetails[1] = cpu_to_le32((mac[2] << 24) |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
scsi: message: fusion: Replace one-element array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members"[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:
drivers/message/fusion/mptbase.c: In function ‘mptbase_reply’:
drivers/message/fusion/mptbase.c:7747:62: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
7747 | ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
./include/uapi/linux/byteorder/little_endian.h:34:51: note: in definition of macro ‘__le32_to_cpu’
34 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
drivers/message/fusion/mptbase.c:7747:33: note: in expansion of macro ‘le32_to_cpu’
7747 | ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
|
An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in
the declaration, but now gcc-11 warns about this:
drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=]
1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33:
include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
| ~~~~~~~~~~~~~~^~~~~
Change the type back to what the function definition uses.
Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In this case, the code is entirely valid, as the string is properly
terminated, and the size argument is only there out of extra caution in
case it exceeds a page.
This cannot really happen here, so just simplify it to a sizeof().
Link: https://lore.kernel.org/r/20210322160253.4032422-10-arnd@kernel.org Fixes: afff0d2321ea ("scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Mon, 22 Mar 2021 10:33:09 +0000 (11:33 +0100)]
scsi: mvsas: Avoid -Wempty-body warning
Building with 'make W=1' shows a few harmless -Wempty-body warning for the
mvsas driver:
drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_phy_reset':
drivers/scsi/mvsas/mv_94xx.c:278:63: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
278 | mv_dprintk("phy hard reset failed.\n");
| ^
drivers/scsi/mvsas/mv_sas.c: In function 'mvs_task_prep':
drivers/scsi/mvsas/mv_sas.c:723:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
723 | SAS_ADDR(dev->sas_addr));
| ^
Change the empty dprintk() macros to no_printk(), which avoids this warning
and adds format string checking.
There are a couple of warnings in this driver when building with W=1:
drivers/message/fusion/mptbase.c: In function 'PrimeIocFifos':
drivers/message/fusion/mptbase.c:4608:65: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
4608 | "restoring 64 bit addressing\n", ioc->name));
| ^
drivers/message/fusion/mptbase.c:4633:65: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
4633 | "restoring 64 bit addressing\n", ioc->name));
The macros are slightly suboptimal since are not proper statements.
Change both versions to the usual "do { ... } while (0)" style to
make them more robust and avoid the warning.
Arnd Bergmann [Mon, 22 Mar 2021 10:25:43 +0000 (11:25 +0100)]
scsi: aic94xx: Avoid -Wempty-body warning
Building with 'make W=1' shows a harmless -Wempty-body warning:
drivers/scsi/aic94xx/aic94xx_init.c: In function 'asd_free_queues':
drivers/scsi/aic94xx/aic94xx_init.c:858:62: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
858 | ASD_DPRINTK("Uh-oh! Pending is not empty!\n");
Change the empty ASD_DPRINTK() macro to no_printk(), which avoids this
warning and adds format string checking.
scsi: hpsa: Add an assert to prevent __packed reintroduction
Link: https://lore.kernel.org/r/20210330071958.3788214-3-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek <jszczype@redhat.com> CC: Scott Benesh <scott.benesh@microchip.com> CC: Scott Teel <scott.teel@microchip.com> CC: Tomas Henzl <thenzl@redhat.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Don Brace <don.brace@microchip.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Suggested-by: Don Brace <don.brace@microchip.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Boot failure was observed on an HP rx3600 ia64 machine with RAID bus
controller: Hewlett-Packard Company Smart Array P600:
kernel unaligned access to 0xe000000105dd8b95, ip=0xa000000100b87551
kernel unaligned access to 0xe000000105dd8e95, ip=0xa000000100b87551
hpsa 0000:14:01.0: Controller reports max supported commands of 0 Using 16 instead. Ensure that firmware is up to date.
swapper/0[1]: error during unaligned kernel access
The unaligned access comes from 'struct CommandList' that happens to be
packed. Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for
retried cmds") introduced unexpected padding and unaligned atomic_t from
natural alignment to something else.
This change removes packing annotation from a struct not intended to be
sent to controller as is. This restores natural `atomic_t` alignment.
The change was tested on the same rx3600 machine.
Link: https://lore.kernel.org/r/20210330071958.3788214-2-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek <jszczype@redhat.com> CC: Scott Benesh <scott.benesh@microchip.com> CC: Scott Teel <scott.teel@microchip.com> CC: Tomas Henzl <thenzl@redhat.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Don Brace <don.brace@microchip.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Suggested-by: Don Brace <don.brace@microchip.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: hpsa: Use __packed on individual structs, not header-wide
The hpsa driver uses data structures which contain a combination of driver
internals and commands sent directly to the hardware. To manage alignment
for the hardware portions the driver used #pragma pack(1).
Commit f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried
cmds") switched an existing variable from int to bool. Due to the pragma an
atomic_t in the same data structure ended up being misaligned and broke
boot on ia64.
Add __packed to every struct and union in the header file. Subsequent
commits will address the actual atomic_t misalignment regression.
The commit is a no-op at least on ia64:
$ diff -u <(objdump -d -r old.o) <(objdump -d -r new.o)
Link: https://lore.kernel.org/r/20210330071958.3788214-1-slyfox@gentoo.org Fixes: f749d8b7a989 ("scsi: hpsa: Correct dev cmds outstanding for retried cmds") CC: linux-ia64@vger.kernel.org CC: storagedev@microchip.com CC: linux-scsi@vger.kernel.org CC: Joe Szczypek <jszczype@redhat.com> CC: Scott Benesh <scott.benesh@microchip.com> CC: Scott Teel <scott.teel@microchip.com> CC: Tomas Henzl <thenzl@redhat.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Don Brace <don.brace@microchip.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Suggested-by: Don Brace <don.brace@microchip.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Sat, 27 Mar 2021 23:06:50 +0000 (23:06 +0000)]
scsi: qedi: Remove redundant assignment to variable err
Variable err is assigned -ENOMEM followed by an error return path via label
err_udev that does not access the variable and returns with the -ENOMEM
error return code. The assignment to err is redundant and can be removed.
Lee Duncan [Tue, 23 Mar 2021 17:27:56 +0000 (10:27 -0700)]
scsi: fnic: Remove bogus ratelimit messages
Commit b43abcbbd5b1 ("scsi: fnic: Ratelimit printks to avoid flooding when
vlan is not set by the switch.i") added printk_ratelimit() in front of a
couple of debug-mode messages to reduce logging overrun when debugging the
driver. The code:
> if (printk_ratelimit())
> FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
> "Start VLAN Discovery\n");
ends up calling printk_ratelimit() quite often, triggering many kernel
messages about callbacks being supressed.
The fix is to decompose FNIC_FCS_DBG(), then change the order of checks so
that printk_ratelimit() is only called if driver debugging is enabled.
Quinn Tran [Mon, 29 Mar 2021 08:52:26 +0000 (01:52 -0700)]
scsi: qla2xxx: Fix mailbox recovery during PCIe error
For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.
Quinn Tran [Mon, 29 Mar 2021 08:52:22 +0000 (01:52 -0700)]
scsi: qla2xxx: Fix use after free in bsg
On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.
projects / thirdparty / linux.git / log
