Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
Merge tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm ARM32 DeviceTree updates for v6.4
This adds IPA definition to the sdx65 platform, and brings a few
stylistic changes to sdx55 and sdx65.
Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and
RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on
IPQ5332. These are all ARM64 boards, despite being introduced through
the ARM32 pull request...
* tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family
dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board
dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
ARM: dts: qcom: sdx65: move status properties to end of nodes
ARM: dts: qcom: sdx65: add IPA information
Merge tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
* tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
arm64: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Merge tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Merge tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.4
New features:
* Overlays for CPSW9G and CPSW5G on J721e-evm, J7200-evm
* Add support for AM625 based BeaglePlay, AM62-LP-SK
* Audio, RTC, watchdog support for AM625
* McSPI for J7200,j721e, j721s2, J784s4
* ADC for j721s2
* Crypto acceleration, CPSW2G for J784s4
Non critical fixes:
AM62, AM62a:
* Fix schematics error to increase DDR to 4GB on AM62a-SK
* L2Cache size fix (AM62a/AM625)
* ti,vbus-divider property to USB1 on AM625-SK
* Gpio count fix for AM625
J7200,j721e, j721s2, J784s4, AM68, AM69:
* ti,sci-dev-id for J784s4 NAVSS nodes
* j721e-sk: Drop application specific firmware name
* am68-sk: Fix the gpio expander lines for production version
Cleanups:
* Pinmux header move to dt folder (next kernel PR, we will drop the uapi header).
* j721e: ti,strobe-sel property cleanup for descoped HS400 MMC operation
* tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (34 commits)
arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support
arm64: dts: ti: Enable audio on SK-AM62(-LP)
arm64: dts: ti: k3-am62-main: Add McASP nodes
arm64: dts: ti: k3-j784s4: Add MCSPI nodes
arm64: dts: ti: k3-j721s2: Add MCSPI nodes
arm64: dts: ti: k3-j7200: Add MCSPI nodes
arm64: dts: ti: k3-j721e: Add MCSPI nodes
arm64: ti: dts: Add support for AM62x LP SK
arm64: dts: ti: Refractor AM625 SK dts
dt-bindings: arm: ti: k3: Add compatible for AM62x LP SK
arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1
arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2
arm64: dts: ti: Add k3-am625-beagleplay
dt-bindings: arm: ti: Add BeaglePlay
arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode
arm64: dts: ti: j7200-main: Add CPSW5G nodes
arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode
arm64: dts: ti: k3-j721e: Add CPSW9G nodes
arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G
arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC
...
Merge tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Merge tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: OrangePi R1 Plus, NanoPi R2C + R5C + R5S, Khadas Edge2.
General RK3588 additions: audio, thermal management, sdmmc, clock fixes,
watchdog; RK3588-Rock5b: rtc, pwm, audio.
Display support for Odroid Go Super and PinephonePro.
And some misc adaptions for recently merged yaml binding conversions.
* tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: correct panel supplies on Odroid Go Super
arm64: dts: rockchip: Add rk3588-rock-5b analog audio
arm64: dts: rockchip: Add I2S rk3588 nodes
arm64: dts: rockchip: Add rk3588s I2S nodes
arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s
arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s
arm64: dts: rockchip: add rk3588 thermal sensor
arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b
arm64: dts: rockchip: Enable RTC support for Rock 5B
arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
dt-bindings: Add doc for Xunlong OrangePi R1 Plus LTS
arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
dt-bindings: Add doc for FriendlyARM NanoPi R2C
arm64: dts: rockchip: Add touchscreen support to rk3399-pinephone-pro
arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro
dt-bindings: watchdog: rockchip: Add rockchip,rk3588-wdt string
arm64: dts: rockchip: Enable watchdog support for RK3588
arm64: dts: rockchip: remove hclk from dsi node on rk356x
arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts
arm64: dts: rockchip: fix rk3399 dp node
...
Merge tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Merge tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon,
new revision of the IOTA board.
- A couple of imx7d-remarkable2 update to enable cyttsp5 touch and BD71815 PMIC.
- A series from Oleksij Rempel to configure Ethernet reference clock
from device tree.
- A series from Stefan Wahren to use label references for i.MX28 based
boards.
* tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx6ull: Add chargebyte Tarragon support
ARM: dts: imx: Add devicetree for Tolino Vison
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTAÂ board
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
ARM:Â dts: imx6dl-yapp4: Move status to the end of property list
ARM: dts: imx6dl-yapp4: Move phy reset into switch node
ARM: dts: imx28-tx28: add SPDX-License-Identifier
ARM: dts: imx28-ts4600: Convert to use label references
ARM: dts: imx28-evk: Convert to use label references
ARM: dts: imx28-duckbill-2: Include base board
ARM: dts: imx28-duckbill: Convert to use label references
ARM: dts: imx28-cfa10036: Convert to use label references
ARM: dts: imx28-apx4devkit: Convert to use label references
ARM: dts: imx28-m28/sps1: Convert to use label references
ARM: dts: imx28-apf28: Convert to use label references
ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815
ARM: dts: imx7d-remarkable2: Enable the cyttsp5
ARM: dts: imx6dl-yapp4: Use reset-gpios property name
ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
...
Merge tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTAÂ Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Merge tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Merge tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
ARM: dts: aspeed: p10bmc: Change power supply info
Bonnell system supports new ACBEL FSG032 power supply on
I2C addresses 5A and 5B. Update the device tree with new
power supply information and device addresses.
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Marek Vasut [Thu, 6 Apr 2023 16:01:16 +0000 (18:01 +0200)]
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.
Konrad Dybcio [Fri, 31 Mar 2023 01:14:53 +0000 (03:14 +0200)]
arm64: dts: qcom: sm8250: Add GPU speedbin support
SM8250 has (at least) four GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 II (speed bin 0x7) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-5-2dede22dd7f7@linaro.org
Konrad Dybcio [Fri, 31 Mar 2023 01:14:52 +0000 (03:14 +0200)]
arm64: dts: qcom: sm8150: Add GPU speedbin support
SM8150 has (at least) two GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 (speed bin 0x3) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-4-2dede22dd7f7@linaro.org
Konrad Dybcio [Fri, 31 Mar 2023 01:14:51 +0000 (03:14 +0200)]
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
Now that there's display support, there is no reason to assume the default
mode for Adreno should be headless. Keep it like that for boards that
previously enabled it, so as not to create regressions though.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-3-2dede22dd7f7@linaro.org
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
The reset and wake properties in the PCIe EP node belong to the board dts
as they can be customized per board design. So let's move them from SoC
dtsi.
Kathiravan T [Thu, 23 Mar 2023 09:31:20 +0000 (15:01 +0530)]
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
Add the initial device tree support for the Reference Design
Platform(RDP) 468 based on IPQ5332 family of SoCs. This patch carries the
support for Console UART, SPI NOR, eMMC.
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared
by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not
in DSI0.
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
Bindings require pin configuration nodes to have the function, even if
it is GPIO:
msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed:
'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Jianhua Lu [Thu, 23 Mar 2023 00:59:25 +0000 (08:59 +0800)]
arm64: dts: qcom: sm8250-xiaomi-elish-csot: Add Xiaomi Mi Pad 5 Pro CSOT variant
Add support for the Xiaomi Mi Pad 5 Pro CSOT variant. The CSOT variant
uses China Star Optoelectronics Technology (CSOT) panel based on NT36523
display controller.
Jianhua Lu [Thu, 23 Mar 2023 00:59:23 +0000 (08:59 +0800)]
arm64: dts: qcom: Split elish dts into common dtsi and elish-boe dts
There are two panel variants of xiaomi-elish, BOE and CSOT panels.
In order to support both panels, so split elish dts into common dtsi
and elish-boe dts.
Konrad Dybcio [Wed, 5 Apr 2023 15:50:34 +0000 (17:50 +0200)]
arm64: dts: qcom: Add initial QTI RB1 device tree
Add an initial device tree for the QTI RB1 development board, based on
the QRB2210 (QCM2290 derivative) SoC. This device tree targets the SoM
revision 4, a.k.a. the Mass Production SKU.
There's no dtbo or other craziness to worry about.
For the best dev experience, you can erase boot and use fastboot boot
everytime, so that the bootloader doesn't mess with you.
If you have a SoM revision 3 or older (there should be a sticker on it
with text like -r00, where r is the revision), you will need to apply
this additional diff:
aliases {
- serial0 = &uart0;
+ serial0 = &uart4;
/* UART connected to the Micro-USB port via a FTDI chip */
- &uart0 {
+ &uart4 {
That should however only concern preproduction boards.
arm64: dts: qcom: sdm845: add SLPI FastRPC support
Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through
an allocated memory region to load files from the host filesystem
such as sensor configuration files.
Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to
downstream, to allow userspace to communicate with the SLPI via the
FastRPC interface for initializing the sensors on the SLPI.
Add the SLPI remoteproc to the SDM845 Qualcomm SoC which is responsible
for exposing the sensors connected to the SoC. The SLPI communicates
over GLink edge 'dsps' and is similar to other DSPs e.g. ADSP or CDSP.
This patch allows the SLPI to boot and expose itself over QRTR as
service 400.
Konrad Dybcio [Fri, 7 Apr 2023 13:28:35 +0000 (15:28 +0200)]
arm64: dts: qcom: pm8916: Fix pm8941-misc node name
Fix the node name to make dtbs_check happy:
qcom/apq8016-sbc.dtb: pmic@0: 'extcon@1300' does not match any of the
regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$',
'^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$',
'^mpps@[0-9a-f]+$', '^nvram@[0-9a-f]+$', '^rtc@[0-9a-f]+$',
'^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$',
'^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$',
'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$'
projects / thirdparty / kernel / linux.git / log
