David Heidelberg [Mon, 13 Dec 2021 19:02:28 +0000 (20:02 +0100)]
arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible
Use correct compatible according to dt-binding.
Fixes + few other lines of `make qcom/sdm845-oneplus-fajita.dtb`:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: qfprom@784000: compatible: ['qcom,qfprom'] is too short
From schema: Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
The clock-frequency property was meant to aid platforms with broken firmwares
that don't set up the timer properly on their own. Don't include it where it is
not the case.
Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback.
This setup has issues, ex if we try to play on headset the audio stream is
also sent to SoundWire Speakers and we will hear sound in both headsets and speakers.
Make a separate device for Speakers and Headset so that the streams are
different and handled properly.
Caleb Connolly [Thu, 9 Dec 2021 22:59:38 +0000 (22:59 +0000)]
arm64: dts: qcom: sdm845-oneplus-*: add msm-id and board-id
The msm-id and board-id can be used to select the correct dtb when
multiple are provided to the bootloader.
Multiple DTBs can be provided on sdm845 devices using boot image header
v1 by appending them all to the kernel image before creating the boot
image. The bootloader then selects them like this:
Best match DTB tags 321/00000008/0x00000000/20001/20014/20115/20018/0/(offset)0x79998E27/(size)0x000173CD
Using pmic info 0x20014/0x20115/0x20018/0x0 for device 0x20014/0x20115/0x20018/0x0
Luca Weiss [Mon, 13 Dec 2021 08:26:11 +0000 (09:26 +0100)]
arm64: dts: qcom: sm6350: Fix validation errors
Sort clocks and interrupts as specified in the docs and remove the stray
property #power-domain-cells from aoss_qmp to solve dtbs_check
validation errors.
Julian Ribbeck [Tue, 16 Nov 2021 20:07:34 +0000 (21:07 +0100)]
arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5)
Samsung J5 2015 is a MSM8916 based Smartphone. It is similar to some of the
other MSM8916 devices, especially the Samsung ones.
With this patch initial support for the following is added:
- eMMC/SD card
- Buttons
- USB (although no suiting MUIC driver currently)
- UART (untested for lack of equipment)
- WiFi/Bluetooth (WCNSS)
It is worth noting that Samsung J5 with MSM8916 exists in different
generations (e.g Samsung J5 2015 and Samsung J5 2016) which each have
different models (e.g. samsung-j5nlte, samsung-j5xnlte, etc). This patch
is only regarding the 2015 generation, but should work with all of it's
models, as far as we could test.
Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211116200734.73920-1-julian.ribbeck@gmx.de
Change sdhcN aliases to mmcN to make them actually work. Currently the
board uses non-standard aliases sdhcN, which do not work, resulting in
mmc0 and mmc1 hosts randomly changing indices between boots.
Kshitiz Godara [Mon, 29 Nov 2021 11:31:36 +0000 (17:01 +0530)]
arm64: dts: qcom: sc7280: Define EC and H1 nodes for IDP/CRD
The IDP2 and CRD boards share the EC and H1 parts, so define
all related device nodes into a common file and include them
in the idp2 and crd dts files to avoid duplication.
Rajendra Nayak [Mon, 29 Nov 2021 11:31:35 +0000 (17:01 +0530)]
arm64: dts: qcom: sc7280-crd: Add device tree files for CRD
CRD (Compute Reference Design) is a sc7280 based board, largely
derived from the existing IDP board design with some key deltas
1. has EC and H1 over SPI similar to IDP2
2. touchscreen and trackpad support
3. eDP display
We just add the barebones dts file here, subsequent patches will
add support for EC/H1 and other components.
Document the qcom,sc7280-crd board based off sc7280 SoC,
The board is also known as hoglin in the Chrome OS builds,
so document the google,hoglin compatible as well.
Stephan Gerhold [Fri, 19 Nov 2021 21:39:53 +0000 (22:39 +0100)]
arm64: dts: qcom: msm8916: Add RPM sleep stats
MSM8916 is similar to the other SoCs that had the RPM stats node added
in commit 290bc6846547 ("arm64: dts: qcom: Enable RPM Sleep stats").
However, the dynamic offset readable at 0x14 seems only available on
some of the newer firmware versions. To be absolutely sure, make use
of the new qcom,msm8916-rpm-stats compatible that reads the sleep stats
from a fixed offset of 0xdba0.
Statistics are available for a "vmin" and "xosd" low power mode:
$ cat /sys/kernel/debug/qcom_stats/vmin
Count: 0
Last Entered At: 0
Last Exited At: 0
Accumulated Duration: 0
Client Votes: 0x0
$ cat /sys/kernel/debug/qcom_stats/xosd
Count: 0
Last Entered At: 0
Last Exited At: 0
Accumulated Duration: 0
Client Votes: 0x0
Dang Huynh [Sat, 20 Nov 2021 21:42:21 +0000 (04:42 +0700)]
arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsi
It's not worth duplicating the same node over and over again,
so let's keep the common bits in the pm660 DTSI, making only
changing the status and keycode necessary.
Also, disable RESIN/PWR by default just in case if there are
devices that doesn't use them.
yangcong [Mon, 15 Nov 2021 03:01:55 +0000 (11:01 +0800)]
arm64: dts: qcom: sc7180: Fix ps8640 power sequence for Homestar rev4
When powering up the ps8640, we need to deassert PD right
after we turn on the vdd33 regulator. Unfortunately, the vdd33
regulator takes some time (~4ms) to turn on. Add in the delay
for the vdd33 regulator so that when the driver deasserts PD
that the regulator has had time to ramp.
Konrad Dybcio [Sun, 14 Nov 2021 01:27:52 +0000 (02:27 +0100)]
arm64: dts: qcom: Add support for Xperia 1 III / 5 III
Add support for SONY Xperia 1 III (PDX215) and 5 III (PDX214) smartphones.
Both are based on the SM8350 Sagami platform and feature some really high-end
specs, such as:
- 4K (1 III / PRO-I) / 1080p (5 III), 120Hz HDR OLED 10-bit panels
- USB-C 3.1 with HDMI in (yes, phone as display!) and DP out
- 5G
- 8 or 12 gigs of ram, 128/256/512 gigs of storage
- A 3.5mm headphone jack, a RGB notification LED and a uSD card slot :)
- IP65/68 dust/water resistance
- Dual front-firing speakers and a lot of microphones
- Crazy complex camera hardware (especially on the PRO-I), which includes
4 cameras, an RGBIR sensor and a 3D iToF
The aforementioned PRO-I (PDX217) is not supported in this patch, because
even though it shares most of the code with 1 III, nobody really has it (yet?)
This only adds basic support for booting to a USB shell with a
bootloader-enabled display, support for all the awesome hardware listed above
will (hopefully) come (hopefully) soon.
In order to get a working boot image, you need to run (e.g. for 1 III):
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Disable PON/RESIN keys by default and keep the RESIN keycode set-per-board, as
these settings are not common between devices (one cannot even assume all
devices have buttons nowadays..).
Konrad Dybcio [Sun, 14 Nov 2021 01:27:45 +0000 (02:27 +0100)]
arm64: dts: qcom: sm8350: Shorten camera-thermal-bottom name
Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.
Konrad Dybcio [Sun, 14 Nov 2021 01:27:40 +0000 (02:27 +0100)]
arm64: dts: qcom: sm8350: Move gpio.h inclusion to SoC DTSI
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Yassine Oudjana [Thu, 4 Nov 2021 11:15:18 +0000 (11:15 +0000)]
arm64: dts: qcom: msm8996-xiaomi-common: Change TUSB320 to TUSB320L
This platform actually doesn't have TUSB320, but rather TUSB320L.
The TUSB320 compatible string was used due to lack of support for
TUSB320L, and it was close enough to detect cable plug-in and
direction, but it was limited to upstream facing port mode only.
Now that support for TUSB320L is added[1], change node name and
compatible to match and allow it to be properly reset and have
its mode set to dual-role port.
Device tree for the Sony Xperia tone family of devices specifies
S9+S10+S11 SAW regulator as a part of the pmi8994_spmi_regulators device
tree node. However PMI8994 does not have these regulators, they are part
of the PM8994 device. All other MSM8996-based devices list them in the
pm8994_spmi_regulators device tree node. Move them accordingly.
arm64: dts: qcom: msm8994-sony-xperia-kitakami: correct lvs1 and lvs2 supply property
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and LVS2 (following the pin name
in the PMIC datasheet). Correct the board's device tree property, so
that the regulator supply is setup properly.
arm64: dts: qcom: apq8096-db820c: correct lvs1 and lvs2 supply property
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and LVS2 (following the pin name
in the PMIC datasheet). Correct the board's device tree property, so
that the regulator supply is setup properly.
Specify that S11 (well, whole block of s8+s9+s10+s11) of pm8994 and S2
(s2 + s3) of pmi8994 are supplied by vph_pwr. While we are at it, add
regulator name to S11, so that is displayed as VDD_APCC in the system.
arm64: dts: qcom: apq8096-db820c: specify adsp firmware name
Specify firmware name to be used for the ADSP. Quoting Bjorn from the
respective apq8016-sbc commit:
The firmware for the modem and WiFi subsystems platform specific and is
signed with a OEM specific key (or a test key). In order to support more
than a single device it is therefor not possible to rely on the default
path and stash these files directly in the firmware directory.
Konrad Dybcio [Thu, 11 Nov 2021 18:46:28 +0000 (19:46 +0100)]
arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)
Add support for SONY Xperia XZ2, XZ2 Compact and XZ3 smartphones, all based on
the Qualcomm SDM845 chipset. There also exists a fourth Tama device, the XZ2
Premium (Aurora) with a 4K display, but it's relatively rare.
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
This platform's bootloader is not very nice either. To boot mainline you need
to flash a bogus DTBO (fastboot erasing may cut it, but it takes an inhumane
amount of time) - one that's just 4 bytes (all zeroes) seems to work just fine.
Of course, one can also provide a "normal" DTBO (device-specific DT overlayed
on top of the SoC DT), but that's not yet supported by the mainline kernel
build system.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211111184630.605035-1-konrad.dybcio@somainline.org
David Heidelberg [Sat, 30 Oct 2021 10:04:12 +0000 (12:04 +0200)]
arm64: dts: qcom: msm8996: drop not documented adreno properties
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Philip Chen [Fri, 29 Oct 2021 22:27:43 +0000 (15:27 -0700)]
arm64: dts: qcom: sc7180: Support Homestar rev4
Support Homestar rev4 board where Parade ps8640 is added as the
second source edp bridge.
Support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-homestar.dtsi"
to per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-homestar.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Philip Chen [Fri, 29 Oct 2021 22:27:42 +0000 (15:27 -0700)]
arm64: dts: qcom: sc7180: Support Lazor/Limozeen rev9
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Philip Chen [Fri, 29 Oct 2021 22:27:41 +0000 (15:27 -0700)]
arm64: dts: qcom: sc7180: Specify "data-lanes" for DSI host output
MSM DSI host driver actually parses "data-lanes" in DT and compare
it with the number of DSI lanes the bridge driver sets for
mipi_dsi_device. So we need to always specify "data-lanes" for the
DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
fragment, but missing in parade-ps8640 dts fragment, which requires
a fixup.
Since we'll do 4-lane DSI regardless of which bridge chip is used,
instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
Philip Chen [Fri, 29 Oct 2021 22:27:40 +0000 (15:27 -0700)]
arm64: dts: qcom: sc7180: Include gpio.h in edp bridge dts
The edp bridge dts fragment files use the macros defined in
'dt-bindings/gpio/gpio.h'.
To help us more flexibly order the #include lines of dts files in a
board-revision-specific dts file, let's include the gpio header in the
bridge dts fragment files themselves.
Stephan Gerhold [Mon, 25 Oct 2021 10:22:24 +0000 (12:22 +0200)]
arm64: dts: qcom: Add missing 'chassis-type's
Add the "chassis-type" to msm8916-samsung-serranove and
sm7225-fairphone-fp4 that were posted before the patch that added the
chassis-type to existing device trees, but merged after it.
Also, looks like sdm636-sony-xperia-ganges-mermaid was missing in
commit eaa744b1c101 ("arm64: dts: qcom: add 'chassis-type' property")
so add it there as well.
SM8250-MTP has WCD9380 codec for headset playback and capture via
rx and tx macro respectively.
Add node for this device to be able to use it for sound card device.
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Linus Torvalds [Sun, 14 Nov 2021 20:18:22 +0000 (12:18 -0800)]
Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Linus Torvalds [Sun, 14 Nov 2021 19:53:59 +0000 (11:53 -0800)]
Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
Linus Torvalds [Sun, 14 Nov 2021 19:37:49 +0000 (11:37 -0800)]
Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
Linus Torvalds [Sun, 14 Nov 2021 19:30:50 +0000 (11:30 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
Linus Torvalds [Sun, 14 Nov 2021 19:11:51 +0000 (11:11 -0800)]
Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Linus Torvalds [Sun, 14 Nov 2021 18:43:38 +0000 (10:43 -0800)]
Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
Linus Torvalds [Sun, 14 Nov 2021 18:38:27 +0000 (10:38 -0800)]
Merge tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
Linus Torvalds [Sun, 14 Nov 2021 18:30:17 +0000 (10:30 -0800)]
Merge tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 static call update from Thomas Gleixner:
"A single fix for static calls to make the trampoline patching more
robust by placing explicit signature bytes after the call trampoline
to prevent patching random other jumps like the CFI jump table
entries"
* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call,x86: Robustify trampoline patching
Linus Torvalds [Sun, 14 Nov 2021 17:39:03 +0000 (09:39 -0800)]
Merge tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
Linus Torvalds [Sun, 14 Nov 2021 17:33:12 +0000 (09:33 -0800)]
Merge tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent unintentional page sharing by checking whether a page
reference to a PMU samples page has been acquired properly before
that
- Make sure the LBR_SELECT MSR is saved/restored too
- Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
residual data left
* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Avoid put_page() when GUP fails
perf/x86/vlbr: Add c->flags to vlbr event constraints
perf/x86/lbr: Reset LBR_SELECT during vlbr reset
Linus Torvalds [Sun, 14 Nov 2021 17:29:03 +0000 (09:29 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
- Clarify the path of paravirt ops patches upstream
- Add an optimization to avoid writing out AMX components to sigframes
when former are in init state
* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Raptor Lake to Intel family
x86/mce: Add errata workaround for Skylake SKX37
MAINTAINERS: Add some information to PARAVIRT_OPS entry
x86/fpu: Optimize out sigframe xfeatures when in init state
Linus Torvalds [Sun, 14 Nov 2021 17:25:01 +0000 (09:25 -0800)]
Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Hardware tracing:
- ARM:
* Print the size of the buffer size consistently in hexadecimal in
ARM Coresight.
* Add Coresight snapshot mode support.
* Update --switch-events docs in 'perf record'.
* Support hardware-based PID tracing.
* Track task context switch for cpu-mode events.
- Fix memory leak of perf_cpu_map__new() in the futex benchmarks.
libbpf:
- Add some more weak libbpf functions o allow building with the
libbpf versions, old ones, present in distros.
libbeauty:
- Translate [gs]setsockopt 'level' argument integer values to
strings.
tools headers UAPI:
- Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
with the kernel sources.
Documentation:
- Add documentation to 'struct symbol'.
- Synchronize the definition of enum perf_hw_id with code in
tools/perf/design.txt"
* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf tests: Remove bash constructs from stat_all_pmu.sh
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
perf test: Remove bash construct from stat_bpf_counters.sh test
perf bench futex: Fix memory leak of perf_cpu_map__new()
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync sound/asound.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
perf tools: Add more weak libbpf functions
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf symbols: Factor out annotation init/exit
perf symbols: Bit pack to save a byte
perf symbols: Add documentation to 'struct symbol'
tools headers UAPI: Sync files changed by new futex_waitv syscall
perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
perf arm-spe: Support hardware-based PID tracing
perf arm-spe: Save context ID in record
perf arm-spe: Update --switch-events docs in 'perf record'
perf arm-spe: Track task context switch for cpu-mode events
...
Linus Torvalds [Sat, 13 Nov 2021 23:32:30 +0000 (15:32 -0800)]
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Linus Torvalds [Sat, 13 Nov 2021 21:14:05 +0000 (13:14 -0800)]
Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux
Pull virtio-mem update from David Hildenbrand:
"Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
now that "accidential" access to logically unplugged memory inside
added Linux memory blocks is no longer possible, because we:
- Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove
/dev/kmem for good")
- Disallowed access to virtio-mem device memory via /dev/mem in
commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory
via /dev/mem")
- Sanitized access to virtio-mem device memory via /proc/kcore in
commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections,
logically offline pages and hwpoisoned pages")
- Sanitized access to virtio-mem device memory via /proc/vmcore in
commit ce2814622e84 ("virtio-mem: kdump mode to sanitize
/proc/vmcore access")
The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
required by some hypervisors implementing virtio-mem in the near
future, so let's support it now that we safely can"
* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
Changing the regexes to a grep works in sh and prints this:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 60186
[...]
Testing tlb_flush.stlb_any
test child finished with 0
---- end ----
perf all PMU test: Ok
Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:26 +0000 (14:48 +0100)]
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:25 +0000 (14:48 +0100)]
perf test: Remove bash construct from stat_bpf_counters.sh test
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / thirdparty / kernel / linux.git / log
