Jim Wilson [Mon, 17 Apr 2000 23:45:22 +0000 (23:45 +0000)]
Initial patches for IA-64 EFI (64-bit PE) support.
* pe.h (PEP64AOUTHDR): New header for PE+.
(PEP64AOUTSZ): New macro.
(IMAGE_SUBSYSTEM_UNKNOWN): New macro.
(IMAGE_SUBSYSTEM_NATIVE): Ditto.
(IMAGE_SUBSYSTEM_WINDOWS_GUI): Ditto.
(IMAGE_SUBSYSTEM_WINDOWS_CUI): Ditto.
(IMAGE_SUBSYSTEM_POSIX_CUI): Ditto.
(IMAGE_SUBSYSTEM_WINDOWS_CE_GUI): Ditto.
(IMAGE_SUBSYSTEM_EFI_APPLICATION): Ditto.
(IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER): Ditto.
(IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER): Ditto.
* internal.h (PE_DEF_FILE_ALIGNMENT): Define only if not defined
already.
* ia64.h: New file.
Elena Zannoni [Mon, 17 Apr 2000 16:09:04 +0000 (16:09 +0000)]
2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* symfile.h (struct section_addr_info ): Remove fields for special
treatment of .text, .data and .bss sections.
* solib.c (symbol_add_stub): The special field text_addr is not
available anymore. Search for the .text field the hard way.
* symfile.c (build_section_addr_info_from_section_table): Don't
fill in {text, data, bss}_addr any more.
(default_symfile_offsets): Don't use {text, data, bss}_addr fields
to fill in section_offsets for objfile.
(syms_from_objfile): Don't deal with {text, data, bss}_addr as a
special case anymore.
(add_symbol_file_command): Ditto.
Elena Zannoni [Mon, 17 Apr 2000 15:47:17 +0000 (15:47 +0000)]
2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* symfile.c (add_symbol_file_command): Rewrite the arguments
processing part. Simplify syntax of command. Remove support for
rombug.
(_initialize_symfile): Update help message for add-symbol-file
command.
Eli Zaretskii [Mon, 17 Apr 2000 10:42:13 +0000 (10:42 +0000)]
* gdb.texinfo (Protocol): Prevent makeinfo from complaining about
a comma inside @var.
(Command Files): Index markup changes from Dmitry Sivachenko
<dima@Chg.RU>.
Jim Blandy [Fri, 14 Apr 2000 19:14:19 +0000 (19:14 +0000)]
Bring IEEE_FLOAT under gdbarch's control.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
Jim Blandy [Fri, 14 Apr 2000 18:43:41 +0000 (18:43 +0000)]
* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
functions which architectures can redefine, defaulting to
generic_pointer_to_address and generic_address_to_pointer.
* findvar.c (extract_typed_address, store_typed_address,
generic_pointer_to_address, generic_address_to_pointer): New
functions.
(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
definitions.
(extract_address, store_address): Doc fixes.
* values.c (value_as_pointer): Doc fix.
(value_from_pointer): New function.
* defs.h (extract_typed_address, store_typed_address): New
declarations.
* inferior.h (generic_address_to_pointer,
generic_pointer_to_address): New declarations.
* value.h (value_from_pointer): New declaration.
* ax-gdb.c (const_var_ref): Use value_from_pointer, not
value_from_longest.
* blockframe.c (generic_push_dummy_frame): Use read_pc and
read_sp, not read_register.
* c-valprint.c (c_val_print): Use extract_typed_address instead of
extract_address to extract vtable entries and references.
* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
instead of value_from_longest to extract the vtable's address.
* eval.c (evaluate_subexp_standard): Use value_from_pointer
instead of value_from_longest to compute `this', and for doing
pointer-to-member dereferencing.
* findvar.c (read_register): Use extract_unsigned_integer, not
extract_address.
(read_var_value): Use store_typed_address instead of store_address
for building label values.
(locate_var_value): Use value_from_pointer instead of
value_from_longest.
* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
instead of value_from_longest, to build arguments to __d_shl_get.
* printcmd.c (set_next_address): Use value_from_pointer, not
value_from_longest.
(x_command): Use value_from_pointer, not value_from_longest.
* tracepoint.c (set_traceframe_context): Use value_from_pointer,
not value_from_longest.
* valarith.c (value_add, value_sub): Use value_from_pointer, not
value_from_longest.
* valops.c (find_function_in_inferior, value_coerce_array,
value_coerce_function, value_addr, hand_function_call): Same.
* value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
* values.c (unpack_long): Use extract_typed_address to produce
addresses from pointers and references, not extract_address.
(value_from_longest): Use store_typed_address instead of
store_address to produce pointer and reference values.
* scripttempl/elf.sc: Add support for .sbss2 and .sdata2 sections.
Add new BSS_PLT variable for when .plt need not be contained in
the file. Move _etext so that it is also after .fini, and provide
both etext and _etext with a leading underscore. Mark the start
and end of .sbss.
Peter Schauer [Thu, 13 Apr 2000 18:11:41 +0000 (18:11 +0000)]
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Define.
* config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
to handle floating point registers if NUM_FREGS is not zero.
Eli Zaretskii [Thu, 13 Apr 2000 10:22:22 +0000 (10:22 +0000)]
* infrun.c (proceed, normal_stop): Change the error message about
failure to insert breakpoints/watchpoints so that it makes sense
even if ptrace is not used or no other processes can be active.
Andrew Cagney [Thu, 13 Apr 2000 02:17:35 +0000 (02:17 +0000)]
* Makefile.in (gdb-taz): New target. GDB specific archive.
(do-md5sum): New target.
(MD5PROG): Define.
(PACKAGE): Default to TOOL.
(VER): Default to a shell script.
(taz): Rewrite target. Move real work to do-proto-toplev. Include
md5 checksum generation.
(do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
(do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
(gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
insight.tar.bz2): Use gdb-taz to create archive.
Eli Zaretskii [Wed, 12 Apr 2000 17:04:42 +0000 (17:04 +0000)]
* go32-nat.c (go32_insert_hw_breakpoint): When there are no more
hardware breakpoint resources, return EBUSY.
(go32_handle_nonaligned_watchpoint): If the argument WHAT is not
one of the enumerated values, return EINVAL.
Eli Zaretskii [Wed, 12 Apr 2000 16:43:27 +0000 (16:43 +0000)]
* top.c (gdb_completer_file_name_break_characters): New variable.
(line_completion_function): When completing on file names, use
gdb_completer_file_name_break_characters as word break
characters for the readline library.
Fernando Nasser [Tue, 11 Apr 2000 19:41:11 +0000 (19:41 +0000)]
2000-04-11 Fernando Nasser <fnasser@cygnus.com>
* wrapper.h: Remove definitions of internal functions.
* wrapper.c: Remove definitions of exported functions (which are
already in wrapper.h) and make static all internal wrap_* functions.
Andrew Cagney [Sun, 9 Apr 2000 13:29:52 +0000 (13:29 +0000)]
2000-04-07 J.T. Conklin <jtc@redback.com>: lynx-nat.c
(fetch_inferior_registers, store_inferior_registers): replace calls to
target_xfer_memory() with target_read_memory() and
target_write_memory().
Andrew Cagney [Sun, 9 Apr 2000 12:17:43 +0000 (12:17 +0000)]
Remove ``-W -Wall'' from top-level Makefile/configure.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
Jim Blandy [Sat, 8 Apr 2000 22:35:35 +0000 (22:35 +0000)]
* dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
Don't include "bfd-elf.h".
(address_significant_size): Delete variable.
(dwarf2_build_psymtabs_hard): Don't set it, or check for
consistency between it and the Dwarf 2 compilation unit header
address size.
(read_address): Don't mask off bits above
address_significant_size.
* Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
(elf_bfd_h): Remove variable; it's no longer used.
Jim Blandy [Sat, 8 Apr 2000 17:49:31 +0000 (17:49 +0000)]
* gdbint.texinfo (Using Different Register and Memory Data
Representations): New section.
(REGISTER_CONVERTIBLE, REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE,
REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Document.
projects / thirdparty / binutils-gdb.git / log
