Merge tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.12:
- A series from Alexander Stein that improves imx93-tqma9352 board
support by adding PMIC, eMMC regulators, pad configurations, etc.
- A series from Benjamin Hahn that enables overlay for no Ethernet
device, TPM and PCIe support for imx8mp-phycore board
- A few changes from Fabio Estevam that fix dt-schema warnings for
i.MX8MM and i.MX93 based boards
- A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC
thermal zone and USB3803 HUB for colibri-imx8x board
- A great number of changes from Frank Li that improve i.MX95 based with
many device additions, and fix dt-schema warnings on various i.MX8 and
layerscape device trees
- A series from João Paulo Gonçalves to add HDMI audio, analog input,
VPU, and sound card support for Toradex Verdin and Colibri boards
- A series from Markus Niebel to improve imx93-tqma9352 board support
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- A couple of changes from Peng Fan to describe cache configuration for
i.MX93 SoC and add device tree for i.MX93-14x14-EVK board
- A series from Shengjiu Wang to improve various audio features for
imx93-11x11-evk board
- A series from Yashwanth Varakala to better describe regulator usage
for imx8mp-phyboard-pollux board
- Other random changes on various board device trees
* tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits)
arm64: dts: imx: rename gpio hog as <gpio name>-hog
arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
arm64: dts: imx8mm-var-som: drop unused top-level compatible
arm64: dts: ls1088ardb: add new RTC PCF2131 support
arm64: dts: colibri-imx8x: Cleanup comments
arm64: dts: colibri-imx8x: Add 50mhz clock for eth
arm64: dts: colibri-imx8x: Add adma_pwm
arm64: dts: colibri-imx8x: Add vpu support
arm64: dts: colibri-imx8x: Add USB3803 HUB
arm64: dts: colibri-imx8x: Add PMIC thermal zone
arm64: dts: colibri-imx8x: Add sound card
arm64: dts: colibri-imx8x: Add fxl6408 gpio expander
arm64: dts: colibri-imx8x: Add analog inputs
arm64: dts: colibri-imx8x: Add usb support
arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes
arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
arm64: dts: imx8qm: add mipi subsystem
arm64: dts: imx8: add basic mipi subsystem
...
Merge tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Merge tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.12:
- New compatibles for boards: Kontron i.MX93 OSM-S, i.MX93 14x14 EVK,
Variscite Symphony and VAR-SOM-MX8MP, etc
- One spelling correction on TQ-Systems
- One renaming of gw7905 to gw75xx
* tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible alone
dt-bindings: arm: fsl: rename gw7905 to gw75xx
dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
dt-bindings: arm: fsl: correct spelling of TQ-Systems
dt-bindings: arm: fsl: add fsl-ls2081a-rdb board
dt-bindings: arm: fsl: add i.MX93 14x14 EVK board
Merge tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v6.12
Sopgho:
Added DMA controller for CV18XX.
Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042.
Enable SDHCI0 for HuashanPi (using cv1812h).
Some minor changes about dt-bindings for Sipeed LicheeRV Nano board
(using SG2002, and SG2002 is the new codename of CV181xC).
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux:
dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles
dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic
riscv: dts: sophgo: Add mcu device for Milk-V Pioneer
riscv: sophgo: dts: add gpio controllers for SG2042 SoC
riscv: sophgo: dts: add mmc controllers for SG2042 SoC
riscv: dts: sophgo: Add i2c device support for sg2042
riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042
riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi
riscv: dts: sophgo: cv18xx: add DMA controller
Merge tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.12
Generic Fixups/Cleanups:
- AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups
- J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges
- j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep
- j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage.
- Misc device tree warning fixups: Serdes simple-mfd fixes for
am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names
SoC Specific features and Fixes:
New boards:
- AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI
AM62:
- Thermal throttling enabled
AM62A:
- Add E5010 JPEG encoder
AM62P:
- gpio-reserved ranges
- SK: drop cts/rts for wakeup_uart0 firmware console pinmux
J722s: (AM62P variant)
- IPC/Remote proc for C7x and R5F
- gpio-reserved ranges
- EVM: Add main_uart5 description and CAN support.
AM64x:
- adc description fixes for dtbs_check warnings
- tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability
- CPSW Ethernet is now disabled by default at SoC level and enabled explicitly
at board level.
- USB property to add fall back to j721e
AM65x:
- IOT2050: Add overlays for M.2, add Eth phy LED description
- idk: Fixes for DMA causing dtbs_check warning, Add MCAN
J721e:
- SK and beagleboneai64: Fixes for inverted C6x carveouts
J721s2:
- AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup
alignment fixup.
J784s4:
- WDT clock ID fix.
- EVM: Use 4 lanes for PCIe0.
* tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits)
arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication
arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash
arm64: dts: ti: Add k3-am67a-beagley-ai
dt-bindings: arm: ti: Add BeagleY-AI
arm64: dts: ti: iot2050: Declare Ethernet PHY leds
arm64: dts: ti: k3-am65: Add ESM nodes
arm64: dts: ti: k3-am64: Add more ESM interrupt sources
arm64: dts: ti: k3-am62a: Add ESM nodes
arm64: dts: ti: k3-am62: Add comments to ESM nodes
arm64: dts: ti: k3-am62p: Fix ESM interrupt sources
arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM
arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name
arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names
arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas
arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges
arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges
arm64: dts: ti: k3-j721e: Include entire FSS region in ranges
arm64: dts: ti: k3-am65: Include entire FSS region in ranges
arm64: dts: ti: k3-am64: add USB fallback compatible to J721E
...
Merge tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Frank Li [Mon, 2 Sep 2024 19:30:12 +0000 (15:30 -0400)]
arm64: dts: imx: rename gpio hog as <gpio name>-hog
Rename admin_led_lower to admin-led-lower-hog.
Rename gpio rs485_en as rs485-en-hog.
Rename gpio uart4_rs485_en to uart4-rs485-en-hog.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76:
'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb:
gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arm64: dts: imx8mm-var-som: drop unused top-level compatible
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the top-level compatible field to avoid any
false impression that such usage is possible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN,
and the GPU is already enabled in the SOC dtsi.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add adma_pwm node for Colibri-iMX8X carrier boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add adc nodes for analog inputs support for all Colibri-iMX8X carrier
boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Wed, 28 Aug 2024 17:36:51 +0000 (10:36 -0700)]
arm64: dts: freescale: rename gw7905 to gw75xx
The GW7905 was renamed to GW7500 before production release.
While we typically do not change compatibles, the GW7905 was never
released before its product name was changed to a GW7500.
The use the the 'xx' wildcard is to denote the fact that this
device-tree can support range of board models from GW7500 to GW7599 as
has been done historically with the Gateworks baseboards to support
various build customizatoins based on the same PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Liu Ying [Tue, 27 Aug 2024 06:47:16 +0000 (14:47 +0800)]
arm64: dts: imx93-11x11-evk: Add PWM backlight for "LVDS" connector
J702 on i.MX93 11x11 EVK base board is a 40-pin connector labelled
"LVDS". This connector supports PWM backlight with default 12V power
supply and ADP5585 PWM controller. Add support for the backlight.
Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an S/PDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
that the fsl-asoc-card driver supports multiple hardware.
They are properties already used by devices using the
fsl-asoc-card driver.
They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
driver. However, there are already two codec drivers for the S/PDIF,
spdif_transmitter and spdif_receiver.
It is better to declare S/PDIF Tx and Rx devices in a DT, and then
reference them with "audio-codec" than using the dummy codec.
For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
These modifications were tested only on an imx8mn-evk board.
Note that out-of-tree and old DTs are still supported.
Adam Ford [Mon, 19 Aug 2024 23:18:14 +0000 (18:18 -0500)]
arm64: dts: imx8mp-beacon: Enable DW HDMI Bridge
There is a second HDMI connector on the baseboard which is routed
to the DW HDMI bridge through the PVI to the LCDIF3 and requires the
HDMI PHY to be enabled too.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:21 +0000 (13:01 -0400)]
arm64: dts: imx8mm-beacon-kit: add DVDD-supply and DOVDD-supply
According to binding doc, DVDD-supply and DOVDD-supply is required
properties. Add these to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper
Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove fallback comaptible string arm,cortex-a9-gic to fix below warning:
/home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
/home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
'nvidia,tegra210-agic' was expected
'arm,cortex-a15-gic' is not one of ['nvidia,tegra186-agic', 'nvidia,tegra194-agic', 'nvidia,tegra234-agic']
'arm,gic-400' was expected
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:18 +0000 (13:01 -0400)]
arm64: dts: imx8mp-venice: add vddl and vana for sensor@10
Add vddl and vana for sensor@10 to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb:
sensor@10: 'VANA-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:16 +0000 (13:01 -0400)]
arm64: dts: imx8mm-venice-gw7902(3): add #address-cells for gsc@20
Add #address-cells and #size-cells for gsc@20 node to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dtb:
gsc@20: '#address-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:15 +0000 (13:01 -0400)]
arm64: dts: fsl-ls1028: add missed supply for wm8904
Add A(CP, DB, DC, MIC)VDD-supply for wm8904 to fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb:
audio-codec@1a: 'AVDD-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:14 +0000 (13:01 -0400)]
arm64: dts: layerscape: rename mdio-mux-emi to mdio-mux@<addr>
Rename node name mdio-mux-emi<n>@<addr> to mdio-mux@<addr>.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dtb: board-control@2,0: 'mdio-mux-emi1@54' does not match any of the regexes: '^mdio-mux@[a-f0-9,]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 19 Aug 2024 17:01:13 +0000 (13:01 -0400)]
arm64: dts: fsl-ls1012a-frdm: move clock-sc16is7xx under root node
Move fixed clock "clock-sc16is7x" from dspi to root node to fix below
warning:
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb:
serial@0: Unevaluated properties are not allowed ('clock-sc16is7xx' was unexpected)
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix warning:
dma-controller@8380000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,ls1021a-qdma', 'fsl,ls1043a-qdma'] is too long
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 19 Aug 2024 12:03:28 +0000 (14:03 +0200)]
arm64: dts: freescale: imx93-tqma9352: set SION for cmd and data pad of USDHC
imx93 pad integrate has one issue, refer to ERR052021:
ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low
drive mode and nominal mode
Description:
uSDHC PADs have one integration issue.
When CMD/DATA lines direction change from output to input, uSDHC
controller begin sampling, the integration issue will make input
enable signal from uSDHC propagated to the PAD with a long delay,
thus the new input value on the pad comes to uSDHC lately. The
uSDHC sampled the old input value and the sampling result is wrong.
Workaround:
Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will
propagate input to uSDHC with no delay, so correct value is sampled.
This issue will wrongly trigger the start bit when sample the USDHC
command response, cause the USDHC trigger command CRC/index/endbit
error, which will finally impact the tuning pass window, espically
will impact the standard tuning logic, and can't find a correct delay
cell to get the best timing.
This follows changes made for i.MX93 EVK with commit bb89601282fc ("arm64:
dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Sun, 18 Aug 2024 20:29:52 +0000 (22:29 +0200)]
arm64: dts: imx8mm: Update Data Modul i.MX8M Mini eDM SBC DT to rev.A01
Update the DT to match newest Data Modul i.MX8M Mini eDM SBC rev.A01
board which implements PHY changes. Keep some of the rev.900 PHY node
in the DT so that a DTO can be used to support rev.900 boards easily.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Paul Elder [Wed, 14 Aug 2024 16:14:51 +0000 (19:14 +0300)]
arm64: dts: imx8mp: Add DT nodes for the two ISPs
The ISP supports both CSI and parallel interfaces, where port 0
corresponds to the former and port 1 corresponds to the latter. Since
the i.MX8MP's ISPs are connected by the parallel interface to the CSI
receiver, set them both to port 1.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurent Pinchart [Tue, 13 Aug 2024 23:40:10 +0000 (02:40 +0300)]
arm64: dts: imx8mp: Clarify csis clock frequency
The DT nodes for the MIPI CSI-2 receivers (MIPI_CSI) configure the
CAM1_PIX and CAM2_PIX clocks to 266 MHz through the assigned-clock-rates
property, and report that frequency in the clock-frequency property. The
i.MX8MP reference manual and datasheet list 266 MHz as a nominal
frequency when using both CSI-2 receivers, so all looks normal.
In reality, the clock is actually set to 250 MHz, as the selected
parent, IMX8MP_SYS_PLL2_1000M, has a 1/4 output that is selected as the
closest frequency to 266 MHz. This doesn't break operation of the
device, but is clearly misleading.
Clarify the clock configuration by selecting the IMX8MP_SYS_PLL2_250M
parent, dropping the redundant assigned-clock-rates, and setting
clock-frequency to 250 MHz. This doesn't cause any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merge tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
spidev on the elgin-r1 got a real compatible, the rk3128 could enable its
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
* tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1
ARM: dts: rockchip: Add vpu nodes for RK3128
ARM: dts: rockchip: use constant for HCLK_SFC on rk3128
Merge tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus,
Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook
Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S
With recent dtc changes making it into linux-next the Wolfvision Visualizer
overlay finally compiles without warnings. And smaller number of
improvements on a number of Radxa boards.
Interesting new additions on a soc-level are the hardware RNG on rk3568,
an additional sdmmc-controller (not supported before) on rk3328 and
v4l video codecs for the rk3588 (decoding of h.264 amongst others).
* tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits)
arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6
arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6
arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6
arm64: dts: rockchip: add Mask Rom key on NanoPC-T6
arm64: dts: rockchip: enable USB-C on NanoPC-T6
arm64: dts: rockchip: enable GPU on NanoPC-T6
arm64: dts: rockchip: add IR-receiver to NanoPC-T6
arm64: dts: rockchip: add SPI flash on NanoPC-T6
arm64: dts: rockchip: add NanoPC-T6 LTS
arm64: dts: rockchip: move NanoPC-T6 parts to DTS
arm64: dts: rockchip: prepare NanoPC-T6 for LTS board
dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
arm64: dts: rockchip: disable display subsystem only for Radxa E25
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A
arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566
dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566
dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB
arm64: dts: rockchip: Add Hardkernel ODROID-M1S
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S
...
Merge tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Merge tag 'tegra-for-6.12-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.12-rc1
This contains a slew of cleanups and consolidation changes for several
Orin boards and also fix some minor issues and enable more features on
the Jetson TX1.
* tag 'tegra-for-6.12-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add thermal nodes to AGX Orin SKU8
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Wire up WiFi on Jetson TX1 module
arm64: tegra: Wire up Bluetooth on Jetson TX1 module
arm64: tegra: Wire up power sensors on Jetson TX1 DevKit
arm64: tegra: Add p3767 PCIe C4 EP details
arm64: tegra: Add Tegra234 PCIe C4 EP definition
arm64: tegra: Add wp-gpio for P2597's external card slot
arm64: tegra: Fix gpio for P2597 vmmc regulator
arm64: tegra: Correct location of power-sensors for IGX Orin
arm64: tegra: enable same UARTs for Orin NX/Nano
arm64: tegra: Add DMA properties for Tegra234 UARTA
Merge tag 'tegra-for-6.12-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.12-rc1
This adds compatible strings for all revisions of the Nyan board.
* tag 'tegra-for-6.12-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Document Nyan, all revisions in kernel tree
Merge tag 'juno-update-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP update for v6.12
Just a single update adding stdout-path to the fast models(FVP and
Foundation) which eliminates the need to specify any platform-specific
kernel command line parameters to get working earlycon or console.
* tag 'juno-update-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Set stdout-path to serial0 in the chosen node
Merge tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.12
1. Exynos7885: Correct amount of RAM on Samsung Galaxy A8.
2. ExynosAutov9: Add new DPUM clock controller and DPUM IOMMU (SysMMU).
3. ExynosAutov920: Add initial (incomplete) clock controllers: TOP and
PERIC0 controllers.
4. Google GS101: Add reboot and poweroff support.
5. Add binding headers with clock IDs for several devices, used by the
DTS.
* tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynosautov920: add initial CMU clock nodes in ExynosAuto v920
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
arm64: dts: exynosautov9: Add dpum SysMMU
arm64: dts: exynosautov9: add dpum clock DT nodes
dt-bindings: clock: exynosautov9: add dpum clock
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
dt-bindings: clock: exynos850: Add TMU clock
arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes
arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB
Merge tag 'renesas-dts-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12
- Add support for sound, push switches, and GP LEDs on the Gray Hawk
Single development board,
- Add missing iommus properties on R-Car Gen3/Gen4 and RZ/G2 SoCs,
- Add PWM support for the R-Car V4M SoC,
- Improve Ethernet descriptions on the RZ/G2L, RZ/G2LC, and RZ/G2UL
SMARC SoMs,
- Add DMAC support for the RZ/G3S SoC,
- Add CAN-FD support for the R-Car V4M SoC and the Gray Hawk Single
development board.
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
ARM: dts: imx6qdl: align pin config nodes with bindings
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: dts: imx6sl: align pin config nodes with bindings
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Fabio Estevam [Wed, 28 Aug 2024 19:49:19 +0000 (16:49 -0300)]
ARM: dts: imx23/8: Rename apbh and apbx nodes
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Niklas Söderlund [Mon, 26 Aug 2024 14:43:52 +0000 (16:43 +0200)]
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
The usage of the R-Car V4M CSISP bindings where merged before the
bindings where approved. At that time the family fallback compatible
where not part of the bindings, add them.
Niklas Söderlund [Mon, 26 Aug 2024 14:43:49 +0000 (16:43 +0200)]
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
To make it easier to support new R-Car Gen4 SoCs add a family fallback
compatible similar to what was done for VIN on R-Car Gen4.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
projects / thirdparty / kernel / linux.git / log
