Richard Sharpe [Sat, 18 Apr 2015 15:40:14 +0000 (08:40 -0700)]
Convert all uses of uint8/16/32 to uint8/16/32_t in the libads code.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 22 06:22:29 CEST 2015 on sn-devel-104
Ralph Boehme [Fri, 17 Apr 2015 07:12:59 +0000 (09:12 +0200)]
s3:smbd: update comment to correctly reflect MS-SMB2
Signed-off-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 22 01:04:02 CEST 2015 on sn-devel-104
Ralph Boehme [Tue, 21 Apr 2015 16:58:09 +0000 (18:58 +0200)]
s3:lib: use talloc_get_type_abort
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Apr 21 22:14:07 CEST 2015 on sn-devel-104
This causes the talloc.3 build to be reproducible. We're trying to
make all builds in Debian reproducible - see
https://wiki.debian.org/ReproducibleBuilds/About for reasoning.
Change-Id: I9bd64d1783abfb33211cbc9dc9c2bbf6db047f3e Signed-Off-By: Jelmer Vernooij <jelmer@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Apr 19 03:05:53 CEST 2015 on sn-devel-104
Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-by: Jeremy Allison <jra@samba.org> Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Apr 18 01:33:04 CEST 2015 on sn-devel-104
Jeremy Allison [Wed, 15 Apr 2015 17:36:00 +0000 (10:36 -0700)]
s3: locking: Add a memcache based lock cache.
Based on an idea by Volker to optimize cpu usage when
parsing struct share_mode_data entries.
Add a 64-bit sequence number to the share mode entry,
and after the entry is stored back in the db, cache
the in-memory version using talloc reparenting into the
memcache. The memcache key used is the same struct file_id
used as the key into the locking db.
On read, check if the locking db version sequence number
matches the in-memory cache, and if so reparent the
memcache version back onto the required memory context.
Saves all the ndr decoding when multiple accesses to the
same lock entry happen in succession.
Design also improved by Metze and Ira.
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Apr 17 22:38:34 CEST 2015 on sn-devel-104
Due to usage of CTDB_NO_MEMORY macro,
some of the resources are not freed in failure cases.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Guenther Deschner <gd@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Fri Apr 17 16:49:05 CEST 2015 on sn-devel-104
Querying the fileset id requires additional GPFS API calls and also
opening a directory, which might have other side effects. A better
option would be configuring the file system with --filesetdf, then the
fileset quota is automatically reflected in the free space information
reported from gpfs.
Signed-off-by: Christof Schmitt <cs@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Richard Sharpe [Tue, 14 Apr 2015 14:02:37 +0000 (07:02 -0700)]
Change all uses of uint16/uint32/uint64 to uintXX_t in smb.h.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 16 23:44:00 CEST 2015 on sn-devel-104
Richard Sharpe [Wed, 15 Apr 2015 20:53:09 +0000 (13:53 -0700)]
s3: smbd: Make sure we do not pass paths with ./ on the front to VFS routines.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 16 07:30:30 CEST 2015 on sn-devel-104
Richard Sharpe [Tue, 14 Apr 2015 14:50:28 +0000 (07:50 -0700)]
Change the registry subsystem to use uint32_t from uint32. Also change session.h.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 16 00:37:28 CEST 2015 on sn-devel-104
David Disseldorp [Wed, 15 Apr 2015 13:48:06 +0000 (15:48 +0200)]
spoolss: cache_key handle allocation failures early
On cache_key allocation failure, set_printer_hnd_name() currently
stumbles through the rest of the function, and includes extra logic to
handle a NULL key later on.
Handling the allocation failure early makes sense, and also allows for
the NULL key checks to be removed.
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Wed Apr 15 18:55:50 CEST 2015 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Apr 15 11:20:22 CEST 2015 on sn-devel-104
Roel van Meer [Tue, 14 Apr 2015 14:59:13 +0000 (16:59 +0200)]
Fix incorrect order of arguments in error string
Reviewed-by: Jeremy Allison <jra@samba.org> Reviewed-by: Ralph Böhme <rb@sernet.de>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 15 05:57:25 CEST 2015 on sn-devel-104
David Disseldorp [Tue, 31 Mar 2015 23:03:13 +0000 (01:03 +0200)]
spoolss: purge the printer name cache on name change
Currently the name cache is only cleared on printer deletion. This means
that if a printer undergoes a name change, the old name remains in the
cache and can be subsequently used incorrecly if another printer takes
the same name as the old.
Reported-by: Franz Pförtsch <franz.pfoertsch@brose.com> Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Apr 14 05:37:50 CEST 2015 on sn-devel-104
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue Apr 14 02:58:43 CEST 2015 on sn-devel-104
Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Apr 9 19:35:38 CEST 2015 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Apr 9 16:57:15 CEST 2015 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Apr 8 15:06:26 CEST 2015 on sn-devel-104
Martin Schwenke [Wed, 4 Feb 2015 01:06:56 +0000 (12:06 +1100)]
ctdb-tools: Drop the recovery from "reloadnodes"
A recovery is not required: when deleting a node it should already be
disconnected and when adding a node it will also be disconnected. The
new sanity checks in "reloadnodes" ensure that these assumptions are
met.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Martin Schwenke [Tue, 10 Feb 2015 04:43:03 +0000 (15:43 +1100)]
ctdb-daemon: Don't delay reloading the nodes file
Presumably this was done to minimise the chance of a recovery
occurring while the nodemaps are inconsistent across nodes.
Another potential theory is that the forced recovery in the
ctdb.c:control_reload_nodes_file() stops another recovery occurring
for ReRecoveryTimeout seconds, so this delay causes the reloads to
occur during that period.
This is no longer necessary because recoveries are now explicitly
disabled while node files are reloaded.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Martin Schwenke [Fri, 6 Feb 2015 09:59:11 +0000 (20:59 +1100)]
ctdb-recoverd: Avoid nodemap-related checks when recoveries are disabled
The potential resulting recovery won't run anyway. Also recoveries
may have been disabled by "reloadnodes" and if the nodemaps are
inconsistent between nodes then avoid triggering an unnecessary
recovery.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Martin Schwenke [Wed, 1 Apr 2015 06:10:46 +0000 (17:10 +1100)]
ctdb-tools: Fix spurious messages about deleted nodes being disconnected
The code was too "clever". The 4 different cases should be separate.
The "node remains deleted" case doesn't need the IP address comparison
(always 0.0.0.0) or the disconnected check.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
leaked_storage: Variable pk going out of scope leaks the storage it points to.
On failure get_pk_from_raw_keypair_params function should free up
the private key (pk) it allocates internally.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Guenther Deschner <gd@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Thu Apr 2 19:38:22 CEST 2015 on sn-devel-104
Michael Adam [Wed, 1 Apr 2015 10:56:05 +0000 (12:56 +0200)]
build:wafsamba: fix a typo
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Apr 2 16:39:01 CEST 2015 on sn-devel-104
If a vfs module has no ACL callbacks, smbd will use its default ACL
callbacks. These default ACL callbacks operate on local filesytem,
it's clearly wrong for ceph case.
libcephfs does not support ACL yet, so this patch adds ACL callbacks
that do nothing.
Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ira Cooper <ira@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
David Disseldorp [Tue, 31 Mar 2015 16:06:43 +0000 (18:06 +0200)]
ctdb: check for talloc_asprintf() failure
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Apr 1 15:36:03 CEST 2015 on sn-devel-104
s3-passdb: Fix 'force user' with winbind default domain
If we set 'winbind use default domain' and specify 'force user = user'
without a domain name we fail to log in. In this case we need to try a
lookup with the domain name.
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Mar 31 21:17:23 CEST 2015 on sn-devel-104
David Disseldorp [Tue, 14 May 2013 22:42:35 +0000 (00:42 +0200)]
selftest: add snapshot share configuration
Define a share that uses both vfs_shell_snap and fake_snap.pl to create,
delete and expose fake snapshots in response to FSRVP requests.
Additionally test snapshot enumeration and access via the shadow_copy2
module.
Allow for simple testing of FSRVP message sequence timeouts, by
specifying an artificially small interval.
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
David Disseldorp [Wed, 30 Jan 2013 13:42:46 +0000 (14:42 +0100)]
vfs: add vfs_shell_snap module
The shell_snap VFS module plumbs into the snapshot (aka shadow-copy)
management paths used by Samba's File Server Remote VSS Protocol (FSRVP)
server.
The following shell callouts may be configured in smb.conf:
shell_snap: check path command
- Called when an FSRVP client wishes to check whether a given
share supports snapshot create/delete requests.
- The command is called with a single <share path> argument.
- The command must return 0 if <share path> is capable of being
snapshotted.
shell_snap: create command
- Called when an FSRVP client wishes to create a snapshot.
- The command is called with a single <share path> argument.
- The command must return 0 status if the snapshot was
successfully taken.
- The command must output the path of the newly created snapshot
to stdout.
shell_snap: delete command
- Called when an FSRVP client wishes to delete a snapshot.
- The command is called with <base share path> and
<snapshot share path> arguments.
- The command must return 0 status if the snapshot was
successfully removed.
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
This extends the vfs_snapper man page to also cover FSRVP remote
snapshot behaviour and configuration.
The permissions section is also extended to describe specific Samba and
Snapper requirements for remote snapshot creation and deletion using
DiskShadow.exe.
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Noel Power [Thu, 13 Nov 2014 11:13:35 +0000 (11:13 +0000)]
fsrvp: prune shadow copies if associated path doesn't exist
This patch implements some simple FSRVP server housekeeping. On startup
the server scans the cached entries, any entries where the underlying
system paths associated with shadow copies no longer exist are removed
from the cache and from the registry.
This behaviour is disabled by default, but can be enabled via the new
"fss: prune stale" smb.conf parameter.
Signed-off-by: Noel Power <noel.power@suse.com> Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
David Disseldorp [Tue, 10 Apr 2012 12:32:41 +0000 (14:32 +0200)]
fsrvp: add remote snapshot RPC server
The Samba fss_agent RPC server is an implementation of the File Server
Remote VSS (Volume Shadow Copy Service) Protocol, or FSRVP for short.
FSRVP is new with Windows Server 2012, and allows authenticated clients
to remotely request the creation, exposure and deletion of share
snapshots.
The fss_agent RPC server processes requests on the FssAgentRpc named
pipe, and dispatches relevant snapshot creation and deletion requests
through to the VFS.
The registry smb.conf back-end is used to expose snapshot shares, with
configuration parameters and share ACLs cloned from the base share.
There are three FSRVP client implementations that I'm aware of:
- Samba rpcclient includes fss_X commands.
- Windows Server 2012 includes diskshadow.exe.
- System Center 2012.
FSRVP operations are only processed for users with:
- Built-in Administrators group membership, or
- Built-in Backup Operators group membership, or
- Backup Operator privileges, or
- Security token matches the initial process UID
MS-FSRVP specifies that server state should be stored persistently
during operation and retrieved on startup. Use the existing fss_srv.tdb
FSRVP state storage back-end to satisfy this requirement.
Signed-off-by: David Disseldorp <ddiss@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
projects / thirdparty / samba.git / log
