Javier Carrasco [Mon, 27 Jan 2025 19:30:23 +0000 (20:30 +0100)]
iio: light: veml6030: fix scale to conform to ABI
The current scale is not ABI-compliant as it is just the sensor gain
instead of the value that acts as a multiplier to be applied to the raw
value (there is no offset).
Use the iio-gts helpers to obtain the proper scale values according to
the gain and integration time to match the resolution tables from the
datasheet and drop dedicated variables to store the current values of
the integration time, gain and resolution. When at it, use 'scale'
instead of 'gain' consistently for the get/set functions to avoid
misunderstandings.
Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20250127-veml6030-scale-v3-2-4f32ba03df94@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Javier Carrasco [Mon, 27 Jan 2025 19:30:22 +0000 (20:30 +0100)]
iio: gts-helper: export iio_gts_get_total_gain()
Export this function in preparation for the fix in veml6030.c, where the
total gain can be used to ease the calculation of the processed value of
the IIO_LIGHT channel compared to acquiring the scale in NANO.
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250127-veml6030-scale-v3-1-4f32ba03df94@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Silicon Labs Si7210 is an I2C Hall effect magnetic position and
temperature sensor. The driver supports the following functionalities:
* reading the temperature measurements
* reading the magnetic field measurements in a single-shot mode
* choosing the magnetic field measurement scale (20 or 200 mT)
Javier Carrasco [Sun, 19 Jan 2025 17:31:59 +0000 (18:31 +0100)]
iio: light: veml6030: extend regmap to support caching
The configuration registers are not volatile and are not affected
by read operations (i.e. not precious), making them suitable to be
cached in order to reduce the number of accesses to the device.
The key objective in ad7124_disable_one() is clearing the
AD7124_CHANNEL_EN_MSK bit in the channel register. However there is no
advantage to keep the other bits in that register because when the
channel is used next time, all fields are rewritten anyhow. So instead
of using ad7124_spi_write_mask() (which is a register read plus a
register write) use a simple register write clearing the complete
register.
Also do the same in the .disable_all() callback by using the
.disable_one() callback there.
David Lechner [Wed, 22 Jan 2025 23:16:59 +0000 (17:16 -0600)]
iio: dac: ad5791: fix storage
IIO uses "natural" alignment so storagebits should always be a power of
2. Change storagebits to 32 since that is the natural size to store 24
bits of data.
The ad5791 driver currently doesn't use this field anywhere and doesn't
support buffered writes, so this does not change anything. We just don't
want anyone to think that it is OK to have storagebits = 24 in other
drivers.
Gwendal Grignou [Tue, 21 Jan 2025 23:20:07 +0000 (15:20 -0800)]
iio: cros_ec: Trace EC sensors command
For debugging, add tracing for EC_CMD_MOTION_SENSE_CMD command:
- decode the name of the subcommand
- provide internal information for the most common sub-commands:
setting range, frequency, EC probing frequency, ...
- display return status.
When enabled, the tracing output is similar to:
/sys/kernel/debug/tracing # echo 1 > events/cros_ec/enable ; echo 1 > tracing_on ; cat trace_pipe | grep MOTIONSENSE_CMD_SENSOR_ODR
SensorDeviceImp-814 [003] ..... 686.176782: cros_ec_motion_host_cmd: MOTIONSENSE_CMD_SENSOR_ODR, id: 1, data: 200000, result: 4, return: 12500
A new FPGA HDL has been developed from ADI to support ad354xr
devices.
Add support for ad3541r and ad3542r with following additions:
- use common device_info structures for hs and non hs drivers,
- DMA buffering, use DSPI mode for ad354xr and QSPI for ad355xr,
- change sample rate to respect number of lanes.
Preparing for new parts to be added also in the hs driver,
set model data structures in ad3552r-common.c, to be accessible
from both -hs and non hs driver.
iio: dac: ad3552r-hs: use instruction mode for configuration
Use "instruction" mode over initial configuration and all other
non-streaming operations.
DAC boots in streaming mode as default, and the driver is not
changing this mode.
Instruction r/w is still working because instruction is processed
from the DAC after chip select is deasserted, this works until
loop mode is 0 or greater than the instruction size.
All initial operations should be more safely done in instruction
mode, a mode provided for this.
The ad354xr requires DSPI mode (2 data lanes) to work in buffering
mode, so, depending on the DAC type, target TRANSFER_REGISTER
"MULTI_IO_MODE" bitfield can be set between:
SPI (configuration, entire ad35xxr family),
DSPI (ad354xr),
QSPI (ad355xr).
Also bus IO_MODE must be set accordingly.
About removal of AXI_DAC_CUSTOM_CTRL_SYNCED_TRANSFER, according to
the HDL history the flag has never been used. So looks like the driver
was including it by mistake or in anticipation for something that was
never implemented on HDL side.
Current HDL updated documentation confirm it is actually not in use
anymore and replaced by the IO_MODE bits.
Change suggested from the AXI HDL team, modify the function
axi_dac_data_stream_enable() to check for interface busy, to avoid
possible issues when starting the stream.
Matti Vaittinen [Mon, 16 Dec 2024 08:56:37 +0000 (10:56 +0200)]
iio: gts: Simplify available scale table build
Make available scale building more clear. This hurts the performance
quite a bit by looping throgh the scales many times instead of doing
everything in one loop. It however simplifies logic by:
- decoupling the gain and scale allocations & computations
- keeping the temporary 'per_time_gains' table inside the
per_time_scales computation function.
- separating building the 'all scales' table in own function and doing
it based on the already computed per-time scales.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: subhajit.ghosh@tweaklogic.com Link: https://patch.msgid.link/Z1_rRXqdhxhL6wBw@mva-rohm Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fabio Estevam [Mon, 9 Dec 2024 18:16:24 +0000 (15:16 -0300)]
iio: adc: ti-ads124s08: Switch to fsleep()
According to Documentation/timers/delay_sleep_functions.rst,
fsleep() is the preferred delay function to be used in non-atomic
context, so switch to it accordingly.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://patch.msgid.link/20241209181624.1260868-1-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Trevor Gamblin [Wed, 13 Nov 2024 20:53:00 +0000 (15:53 -0500)]
iio: adc: ad4695: add custom regmap bus callbacks
Add a custom implementation of regmap read/write callbacks using the SPI
bus. This allows them to be performed at a lower SCLK rate than data
reads. Previously, all SPI transfers were being performed at a lower
speed, but with this change sample data is read at the max bus speed
while the register reads/writes remain at the lower rate.
Also remove .can_multi_write from the AD4695 driver's regmap_configs, as
this isn't implemented or needed.
Trevor Gamblin [Wed, 13 Nov 2024 20:52:59 +0000 (15:52 -0500)]
iio: adc: ad4695: make ad4695_exit_conversion_mode() more robust
Ensure that conversion mode is successfully exited when the command is
issued by adding an extra transfer beforehand, matching the minimum CNV
high and low times from the AD4695 datasheet. The AD4695 has a quirk
where the exit command only works during a conversion, so guarantee this
happens by triggering a conversion in ad4695_exit_conversion_mode().
Then make this even more robust by ensuring that the exit command is run
at AD4695_REG_ACCESS_SCLK_HZ rather than the bus maximum.
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Trevor Gamblin [Tue, 14 Jan 2025 17:31:55 +0000 (12:31 -0500)]
iio: adc: ad7625: drop BSD license tag
The ad7625 driver was submitted under a dual BSD/GPL license, but this
isn't a requirement for the code, and adds extra complexity. To make it
consistent with similar drivers, drop the BSD tag and leave it as
GPL-2.0-only.
David Lechner [Mon, 13 Jan 2025 21:43:19 +0000 (15:43 -0600)]
iio: adc: ad7173: don't make copy of ad_sigma_delta_info struct
Use two separate static const struct ad_sigma_delta_info instances
instead of making a copy for each driver instance.
Typically in the IIO subsystem, we use multiple static const instances
of the same struct when there are different variants of the same family
of devices as opposed to making a copy for each driver instance and
modifying it.
David Lechner [Mon, 13 Jan 2025 21:43:18 +0000 (15:43 -0600)]
iio: adc: ad7173: move fwnode_irq_get_byname() call site
Move the call to fwnode_irq_get_byname() from the driver-specific
ad7173_fw_parse_device_config() to the shared ad_sd_init() function.
The main reason for this is that we want struct ad_sigma_delta_info to
be static const data that describes the actual ADC chip, not the
application-specific configuration or any runtime state.
Previously, this struct was being used to pass the IRQ number to the
shared ad_sd_init() function. Now, this is replaced by a boolean flag
that is set at compile time and the ad_sd_init() function handles
looking up the IRQ number instead. This also has the added benefit that
if any other drivers need to make use of this in the future, they just
have to set the flag and the shared code will take care of the rest
rather than duplicating the code in each driver.
iio: adc: stm32: Drop unnecessary DT property presence check
There's no reason to check for regulator supply property presence before
calling devm_regulator_get_optional() as that will return -ENODEV if
the supply is not present.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250109182325.3973684-2-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
dt-bindings: iio: Correct indentation and style in DTS example
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Julien Stephan [Wed, 8 Jan 2025 12:49:36 +0000 (13:49 +0100)]
iio: adc: ad7380: add alert support
The alert functionality is an out of range indicator and can be used as
an early indicator of an out of bounds conversion result.
ALERT_LOW_THRESHOLD and ALERT_HIGH_THRESHOLD registers are common to all
channels.
When using 1 SDO line (only mode supported by the driver right now), i.e
data outputs only on SDOA, SDOB (or SDOD for 4 channels variants) is
used as an alert pin. The alert pin is updated at the end of the
conversion (set to low if an alert occurs) and is cleared on a falling
edge of CS.
The ALERT register contains information about the exact alert status:
channel and direction. ALERT register can be accessed using debugfs if
enabled.
User can set high/low thresholds and enable alert detection using the
regular iio events attributes:
In most use cases, user will hardwire the alert pin to trigger a shutdown.
In theory, we could generate userspace IIO events for alerts, but this
is not implemented yet for several reasons [1]. This can be implemented
later if a real use case actually requires it.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
[1] https://lore.kernel.org/all/4be16272-5197-4fa1-918c-c4cdfcaee02e@baylibre.com/
Julien Stephan [Wed, 8 Jan 2025 12:49:33 +0000 (13:49 +0100)]
iio: adc: ad7380: do not use iio_device_claim_direct_scoped anymore
Conditionnal scoped handlers are turning out to be a real pain:
readability issues, compiler and linker handling issues among others so
rollback and remove the scoped version of iio_dvice_claim_direct_mode.
To impove code readability factorize code to set oversampling ratio.
Linus Torvalds [Sun, 2 Feb 2025 18:49:13 +0000 (10:49 -0800)]
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Linus Torvalds [Sun, 2 Feb 2025 18:40:27 +0000 (10:40 -0800)]
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Len Brown [Sun, 2 Feb 2025 16:43:02 +0000 (10:43 -0600)]
tools/power turbostat: version 2025.02.02
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Linus Torvalds [Sat, 1 Feb 2025 23:07:56 +0000 (15:07 -0800)]
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
Linus Torvalds [Sat, 1 Feb 2025 19:30:41 +0000 (11:30 -0800)]
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
Linus Torvalds [Sat, 1 Feb 2025 18:04:29 +0000 (10:04 -0800)]
Merge tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
Linus Torvalds [Sat, 1 Feb 2025 17:49:20 +0000 (09:49 -0800)]
Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
Linus Torvalds [Sat, 1 Feb 2025 17:15:01 +0000 (09:15 -0800)]
Merge tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org. Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.
Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org> Cc: Carlos Bilbao <bilbao@vt.edu> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mattew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
Zhaoyang Huang [Tue, 21 Jan 2025 02:01:59 +0000 (10:01 +0800)]
mm: gup: fix infinite loop within __get_longterm_locked
We can run into an infinite loop in __get_longterm_locked() when
collect_longterm_unpinnable_folios() finds only folios that are isolated
from the LRU or were never added to the LRU. This can happen when all
folios to be pinned are never added to the LRU, for example when
vm_ops->fault allocated pages using cma_alloc() and never added them to
the LRU.
Fix it by simply taking a look at the list in the single caller, to see if
anything was added.
[zhaoyang.huang@unisoc.com: move definition of local] Link: https://lkml.kernel.org/r/20250122012604.3654667-1-zhaoyang.huang@unisoc.com Link: https://lkml.kernel.org/r/20250121020159.3636477-1-zhaoyang.huang@unisoc.com Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()") Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aijun Sun <aijun.sun@unisoc.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Thu, 30 Jan 2025 11:51:31 +0000 (19:51 +0800)]
mm, swap: fix reclaim offset calculation error during allocation
There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed. This may cause corruption of the swap
map, so fix it.
Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com Fixes: 3b644773eefd ("mm, swap: reduce contention on device lock") Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marco Elver [Fri, 24 Jan 2025 12:01:38 +0000 (13:01 +0100)]
kfence: skip __GFP_THISNODE allocations on NUMA systems
On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.
Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.
Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com Fixes: 236e9f153852 ("kfence: skip all GFP_ZONEMASK allocations") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Alexander Potapenko <glider@google.com> Cc: Chistoph Lameter <cl@linux.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nilfs2: fix possible int overflows in nilfs_fiemap()
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
yangge [Sat, 25 Jan 2025 06:53:57 +0000 (14:53 +0800)]
mm: compaction: use the proper flag to determine watermarks
There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory. I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.
Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.
For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point. This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.
Call trace:
__alloc_pages_slowpath
if (compact_result == COMPACT_SKIPPED ||
compact_result == COMPACT_DEFERRED)
goto nopage; // should exit __alloc_pages_slowpath() from here
We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted. There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead. But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.
After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.
Liam R. Howlett [Mon, 27 Jan 2025 17:02:21 +0000 (12:02 -0500)]
kernel: be more careful about dup_mmap() failures and uprobe registering
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.
Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/ Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bruno Faccini [Mon, 27 Jan 2025 17:16:23 +0000 (09:16 -0800)]
mm/fake-numa: handle cases with no SRAT info
Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases
Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com Fixes: 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”) Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Len Brown <lenb@kernel.org> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Catalin Marinas [Mon, 27 Jan 2025 18:42:33 +0000 (18:42 +0000)]
mm: kmemleak: fix upper boundary check for physical address objects
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit 6c99d4eb7c5e ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit 84c326299191 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com Fixes: 84c326299191 ("mm: kmemleak: check physical address when scan") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Cc: Patrick Wang <patrick.wang.shcn@gmail.com> Cc: <stable@vger.kernel.org> [6.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hamza Mahfooz [Mon, 20 Jan 2025 20:56:59 +0000 (15:56 -0500)]
mailmap: add an entry for Hamza Mahfooz
Map my previous work email to my current one.
Link: https://lkml.kernel.org/r/20250120205659.139027-1-hamzamahfooz@linux.microsoft.com Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hans verkuil <hverkuil@xs4all.nl> Cc: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Li Zhijian [Fri, 10 Jan 2025 12:21:32 +0000 (20:21 +0800)]
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
In shrink_folio_list(), demote_folio_list() can be called 2 times.
Currently stat->nr_demoted will only store the last nr_demoted( the later
nr_demoted is always zero, the former nr_demoted will get lost), as a
result number of demoted pages is not accurate.
Accumulate the nr_demoted count across multiple calls to
demote_folio_list(), ensuring accurate reporting of demotion statistics.
[lizhijian@fujitsu.com: introduce local nr_demoted to fix nr_reclaimed double counting] Link: https://lkml.kernel.org/r/20250111015253.425693-1-lizhijian@fujitsu.com Link: https://lkml.kernel.org/r/20250110122133.423481-1-lizhijian@fujitsu.com Fixes: f77f0c751478 ("mm,memcg: provide per-cgroup counters for NUMA balancing operations") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Tested-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Heming Zhao [Tue, 21 Jan 2025 11:22:03 +0000 (19:22 +0800)]
ocfs2: fix incorrect CPU endianness conversion causing mount failure
Commit 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()")
introduced a regression bug. The blksz_bits value is already converted to
CPU endian in the previous code; therefore, the code shouldn't use
le32_to_cpu() anymore.
Link: https://lkml.kernel.org/r/20250121112204.12834-1-heming.zhao@suse.com Fixes: 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hyeonggon Yoo [Mon, 27 Jan 2025 23:16:31 +0000 (08:16 +0900)]
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
Commit c1b3bb73d55e ("mm/zsmalloc: use zpdesc in
trylock_zspage()/lock_zspage()") introduces is_first_zpdesc() function.
However, the function is only used when CONFIG_DEBUG_VM=y.
When building with LLVM=1 and W=1 option, the following warning is
generated:
$ make -j12 W=1 LLVM=1 mm/zsmalloc.o
mm/zsmalloc.c:455:20: error: function 'is_first_zpdesc' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
455 | static inline bool is_first_zpdesc(struct zpdesc *zpdesc)
| ^~~~~~~~~~~~~~~
1 error generated.
Fix the warning by adding __maybe_unused attribute to the function.
No functional change intended.
Link: https://lkml.kernel.org/r/20250127231631.4363-1-42.hyeyoo@gmail.com Fixes: c1b3bb73d55e ("mm/zsmalloc: use zpdesc in trylock_zspage()/lock_zspage()") Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501240958.4ILzuBrH-lkp@intel.com/ Cc: Alex Shi <alexs@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
liuye [Tue, 19 Nov 2024 06:08:42 +0000 (14:08 +0800)]
mm/vmscan: fix hard LOCKUP in function isolate_lru_folios
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn Fixes: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <liuye@kylinos.cn> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sh: boards: Use imply to enable hardware with complex dependencies
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Masahiro Yamada [Sun, 22 Dec 2024 00:32:07 +0000 (09:32 +0900)]
sh: Migrate to the generic rule for built-in DTB
Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
David Wang [Sat, 30 Nov 2024 13:49:09 +0000 (21:49 +0800)]
sh: irq: Use seq_put_decimal_ull_width() for decimal values
On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.
Signed-off-by: David Wang <00107082@163.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
MAINTAINERS: Update my email address
hexagon: Fix unbalanced spinlock in die()
hexagon: Fix warning comparing pointer to 0
hexagon: Move kernel prototypes out of uapi/asm/setup.h header
hexagon: time: Remove redundant null check for resource
hexagon: fix using plain integer as NULL pointer warning in cmpxchg
Linus Torvalds [Sat, 1 Feb 2025 03:49:17 +0000 (19:49 -0800)]
Remove stale generated 'genheaders' file
This bogus stale file was added in commit 101971298be2 ("riscv: add a
warning when physical memory address overflows"). It's the old location
for what is now 'security/selinux/genheaders'.
It looks like it got incorrectly committed back when that file was in
the old location, and then rebasing kept the bogus file alive.
Reported-by: Eric Biggers <ebiggers@kernel.org> Link: https://lore.kernel.org/linux-riscv/20250201020003.GA77370@sol.localdomain/ Fixes: 101971298be2 ("riscv: add a warning when physical memory address overflows") Cc: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 1 Feb 2025 01:10:26 +0000 (17:10 -0800)]
Merge tag 'hardening-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"This is a fix for the soon to be released GCC 15 which has regressed
its initialization of unions when performing explicit initialization
(i.e. a general problem, not specifically a hardening problem; we're
just carrying the fix).
Details in the final patch, Acked by Masahiro, with updated selftests
to validate the fix"
* tag 'hardening-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Use -fzero-init-padding-bits=all
stackinit: Add union initialization to selftests
stackinit: Add old-style zero-init syntax to struct tests
* tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel:
drm/amd/display: restore invalid MSA timing check for freesync
drm/amdkfd: only flush the validate MES contex
drm/amd/display: Correct register address in dcn35
drm/amd/pm: Mark MM activity as unsupported
drm/amd/amdgpu: change the config of cgcg on gfx12
drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1
Linus Torvalds [Fri, 31 Jan 2025 23:39:50 +0000 (15:39 -0800)]
Merge tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Save the original INTX_DISABLE bit at the first pcim_intx() call and
restore that at devres cleanup instead of restoring the opposite of
the most recent enable/disable pcim_intx() argument, which was wrong
when a driver called pcim_intx() multiple times or with the already
enabled state (Takashi Iwai)
* tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Restore original INTX_DISABLE bit by pcim_intx()
Linus Torvalds [Fri, 31 Jan 2025 23:13:25 +0000 (15:13 -0800)]
Merge tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com> Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID") Cc: stable@vger.kernel.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Fri, 31 Jan 2025 20:07:07 +0000 (12:07 -0800)]
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
Linus Torvalds [Fri, 31 Jan 2025 19:49:30 +0000 (11:49 -0800)]
Merge tag 'block-6.14-20250131' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Fix a md-cluster regression introduced
- More sysfs race fixes
- Mark anything inside queue freezing as not being able to do IO for
memory allocations
- Fix for a regression introduced in loop in this merge window
- Fix for a regression in queue mapping setups introduced in this merge
window
- Fix for the block dio fops attempting an iov_iter revert upton
getting -EIOCBQUEUED on the read side. This one is going to stable as
well
* tag 'block-6.14-20250131' of git://git.kernel.dk/linux:
block: force noio scope in blk_mq_freeze_queue
block: fix nr_hw_queue update racing with disk addition/removal
block: get rid of request queue ->sysfs_dir_lock
loop: don't clear LO_FLAGS_PARTSCAN on LOOP_SET_STATUS{,64}
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
blk-mq: create correct map for fallback case
block: don't revert iter for -EIOCBQUEUED
Linus Torvalds [Fri, 31 Jan 2025 19:29:23 +0000 (11:29 -0800)]
Merge tag 'io_uring-6.14-20250131' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
- Series cleaning up the alloc cache changes from this merge window,
and then another series on top making it better yet.
This also solves an issue with KASAN_EXTRA_INFO, by making io_uring
resilient to KASAN using parts of the freed struct for storage
- Cleanups and simplications to buffer cloning and io resource node
management
- Fix an issue introduced in this merge window where READ/WRITE_ONCE
was used on an atomic_t, which made some archs complain
- Fix for an errant connect retry when the socket has been shut down
- Fix for multishot and provided buffers
* tag 'io_uring-6.14-20250131' of git://git.kernel.dk/linux:
io_uring/net: don't retry connect operation on EPOLLERR
io_uring/rw: simplify io_rw_recycle()
io_uring: remove !KASAN guards from cache free
io_uring/net: extract io_send_select_buffer()
io_uring/net: clean io_msg_copy_hdr()
io_uring/net: make io_net_vec_assign() return void
io_uring: add alloc_cache.c
io_uring: dont ifdef io_alloc_cache_kasan()
io_uring: include all deps for alloc_cache.h
io_uring: fix multishots with selected buffers
io_uring/register: use atomic_read/write for sq_flags migration
io_uring/alloc_cache: get rid of _nocache() helper
io_uring: get rid of alloc cache init_once handling
io_uring/uring_cmd: cleanup struct io_uring_cmd_data layout
io_uring/uring_cmd: use cached cmd_op in io_uring_cmd_sock()
io_uring/msg_ring: don't leave potentially dangling ->tctx pointer
io_uring/rsrc: Move lockdep assert from io_free_rsrc_node() to caller
io_uring/rsrc: remove unused parameter ctx for io_rsrc_node_alloc()
io_uring: clean up io_uring_register_get_file()
io_uring/rsrc: Simplify buffer cloning by locking both rings
Masahiro Yamada [Fri, 31 Jan 2025 14:04:01 +0000 (23:04 +0900)]
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
Since commit bede169618c6 ("kbuild: enable objtool for *.mod.o and
additional kernel objects"), Clang LTO builds do not perform any
optimizations when CONFIG_OBJTOOL is disabled (e.g., for ARCH=arm64).
This is because every LLVM bitcode file is immediately converted to
ELF format before the object files are linked together.
This commit fixes the breakage.
Fixes: bede169618c6 ("kbuild: enable objtool for *.mod.o and additional kernel objects") Reported-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Yonghong Song <yonghong.song@linux.dev>
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Linus Torvalds [Fri, 31 Jan 2025 19:07:56 +0000 (11:07 -0800)]
Merge tag 'ata-6.14-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull more ata updates from Niklas Cassel:
- Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives (Daniel)
- Ensure that PIO transfers using libata-sff cannot write outside the
allocated buffer (me)
* tag 'ata-6.14-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sff: Ensure that we cannot write outside the allocated buffer
ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
cifs: Fix parsing native symlinks directory/file type
As SMB protocol distinguish between symlink to directory and symlink to
file, add some mechanism to disallow resolving incompatible types.
When SMB symlink is of the directory type, ensure that its target path ends
with slash. This forces Linux to not allow resolving such symlink to file.
And when SMB symlink is of the file type and its target path ends with
slash then returns an error as such symlink is unresolvable. Such symlink
always points to invalid location as file cannot end with slash.
As POSIX server does not distinguish between symlinks to file and symlink
directory, do not apply this change for symlinks from POSIX SMB server. For
POSIX SMB servers, this change does nothing.
This mimics Windows behavior of native SMB symlinks.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
This change implements support for creating new symlink in WSL-style by
Linux cifs client when -o reparse=wsl mount option is specified. WSL-style
symlink uses reparse point with tag IO_REPARSE_TAG_LX_SYMLINK and symlink
target location is stored in reparse buffer in UTF-8 encoding prefixed by
32-bit flags. Flags bits are unknown, but it was observed that WSL always
sets flags to value 0x02000000. Do same in Linux cifs client.
New symlinks would be created in WSL-style only in case the mount option
-o reparse=wsl is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Tue, 28 Jan 2025 07:04:23 +0000 (01:04 -0600)]
smb3: add support for IAKerb
There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy). IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI. Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.
Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Sun, 29 Dec 2024 14:31:05 +0000 (15:31 +0100)]
cifs: Fix struct FILE_ALL_INFO
struct FILE_ALL_INFO for level 263 (0x107) used by QPathInfo does not have
any IndexNumber, AccessFlags, IndexNumber1, CurrentByteOffset, Mode or
AlignmentRequirement members. So remove all of them.
Also adjust code in move_cifs_info_to_smb2() function which converts struct
FILE_ALL_INFO to struct smb2_file_all_info.
Fixed content of struct FILE_ALL_INFO was verified that is correct against:
* [MS-CIFS] section 2.2.8.3.10 SMB_QUERY_FILE_ALL_INFO
* Samba server implementation of trans2 query file/path for level 263
* Packet structure tests against Windows SMB servers
This change fixes CIFSSMBQFileInfo() and CIFSSMBQPathInfo() functions which
directly copy received FILE_ALL_INFO network buffers into kernel structures
of FILE_ALL_INFO type.
struct FILE_ALL_INFO is the response structure returned by the SMB server.
So the incorrect definition of this structure can lead to returning bogus
information in stat() call.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
CIFS client is currently able to parse NFS-style symlinks, but is not able
to create them. This functionality is useful when the mounted SMB share is
used also by Windows NFS server (on Windows Server 2012 or new). It allows
interop of symlinks between SMB share mounted by Linux CIFS client and same
export from Windows NFS server mounted by some NFS client.
New symlinks would be created in NFS-style only in case the mount option
-o reparse=nfs is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: Add support for creating native Windows sockets
Native Windows sockets created by WinSock on Windows 10 April 2018 Update
(version 1803) or Windows Server 2019 (version 1809) or later versions is
reparse point with IO_REPARSE_TAG_AF_UNIX tag, with empty reparse point
data buffer and without any EAs.
Create AF_UNIX sockets in this native format if -o nonativesocket was not
specified.
This change makes AF_UNIX sockets created by Linux CIFS client compatible
with AF_UNIX sockets created by Windows applications on NTFS volumes.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / thirdparty / kernel / linux.git / log
