MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with OpenBSD targets
OpenBSD targets produce ELF64 files while the pattern dump expects ELF32
output and specific header sizes. Disable it for `mips64*-*-openbsd*'
for these targets then, removing these failures:
MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with IRIX targets
IRIX targets do not enable the production of a `.pdr' section in GAS by
default, which causes a failure with the `attr-gnu-4-10' test case due
to a difference resulting in the number and indices of sections produced
in linker output.
As the presence or absence of this section is not relevant to this test
case, just enable it unconditionally, fixing these regressions:
MIPS/LD/testsuite: Fix JALR relaxation test failure with IRIX 6
The `mips-sgi-irix6' target only supports IRIX linker emulations, but
most JALR relaxation tests request the relevant traditional emulation
instead, causing a link failure:
This is clearly an omission from the conversion to use the per-ABI
framework made with commit 78da84f99405 ("MIPS/LD/testsuite: Correct
mips-elf.exp test ABI/emul/endian arrangement"). These tests are also
endianness agnostic, which was missed in the conversion as well.
Remove the unnecessary explicit ABI and endianness options then and rely
on the per-ABI framework to get things right, removing this regression:
mips-sgi-irix6 -FAIL: MIPS relax-jalr-shared n32
ld/
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Remove flags
related to ABI and endianness selection from the `as' and `ld'
tags.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Remove `as' and `ld' tag
additions from the invocation of JALR relaxation tests.
MIPS/LD/testsuite: Fix unaligned JALX failures with OpenBSD targets
There are only n64 linker emulations included with `mips64*-*-openbsd*'
targets, however the unaligned JALX tests insist on running across all
targets and force the n32 ABI, causing link errors with the targets
concerned, e.g.:
./ld-new: tmpdir/unaligned-jalx-0.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-jalx-0.o
./ld-new: tmpdir/unaligned-insn.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-insn.o
Convert the tests then to use the per-ABI framework and run them for the
o32 and n32 ABIs, removing these regressions:
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
Similar tests for the n64 ABI can be added separately, using suitable
dump patterns.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-0.d: Remove `-32' from
the `as' tag.
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Run unaligned JALX tests
with `run_dump_test_o32' and `run_dump_test_n32' rather than
`run_dump_test'.
MIPS/GAS/testsuite: Disable compact EH #7 tests with OpenBSD targets
Compact EH #7 tests use output templates that are not suitable for the
n64 ABI, which `mips64*-*-openbsd*' targets use by default, because the
contents of the sections examined are expected to be differnt. Disable
the tests then, removing these regressions:
mips64-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
Suitable corresponding tests for the n64 ABI can be added separately.
gas/
* testsuite/gas/mips/compact-eh-eb-7.d: Exclude for
`mips64*-*-openbsd*'.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/LD: Include n64 `.interp' with INITIAL_READONLY_SECTIONS
In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the
`.interp' section, which causes it to be positioned in output at an odd
place.
Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do,
fixing a regression from commit 5a8e7be242f3 ("INITIAL_READONLY_SECTIONS
in elf.sc"), where the handling of n64 was missed due to an unfortunate
sequence of events where ld/emulparams/elf64bmip-defs.sh was only added
with commit 94bb04b3c611 ("Use .reginfo rather than .MIPS.options in n32
linker scripts") the day before.
Add test cases covering section ordering across the three ABIs. This
change also fixes ld/pr23658-2:
FAIL: Build pr23658-2
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
ld/ChangeLog:
* emulparams/elf64bmip-defs.sh: Include `.interp' with
INITIAL_READONLY_SECTIONS.
* testsuite/ld-mips-elf/pie-n64.d: Adjust addresses.
* testsuite/ld-mips-elf/sections-1-o32.rd: New test.
* testsuite/ld-mips-elf/sections-1-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64t.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64t.rd: New test.
* testsuite/ld-mips-elf/sections.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
Alan Modra [Wed, 19 Jul 2023 00:56:04 +0000 (10:26 +0930)]
[GOLD, PowerPC64] Debug info relocation overflow
It is possible to build huge binaries on powerpc64, where 32-bit
addresses in debug info are insufficient to descibe locations in the
binary. Help out the user, and only warn about debug overflows.
* powerpc.cc (Target_powerpc::Relocate::relocate): Warn on
relocation overflows in debug info.
Alan Modra [Sat, 15 Jul 2023 10:17:10 +0000 (19:47 +0930)]
PR10957, Missing option to really print section+offset
Many of the reloc error messages have already been converted from
using %C to using %H in ld.bfd, to print section+offset as well as
file/line/function. This catches a few remaining, and changes gold to
do the same.
Alan Modra [Thu, 13 Jul 2023 04:02:42 +0000 (13:32 +0930)]
elf_object_p load of dynamic symbols
This fixes an uninitialised memory access on a fuzzed file:
0 0xf22e9b in offset_from_vma /src/binutils-gdb/bfd/elf.c:1899:2
1 0xf1e90f in _bfd_elf_get_dynamic_symbols /src/binutils-gdb/bfd/elf.c:2099:13
2 0x10e6a54 in bfd_elf32_object_p /src/binutils-gdb/bfd/elfcode.h:851:9
Hopefully it will also stop any attempt to load dynamic symbols from
eu-strip debug files.
* elfcode.h (elf_object_p): Do not attempt to load dynamic
symbols for a file with no section headers until all the
program headers are swapped in. Do not fail on eu-strip debug
files.
gprofng: 30602 [2.41] gprofng test hangs on i686-linux-gnu
There were several problems in the gprofng testing:
- we did not catch a timeout for each test.
- we used exit() to stop a failed test. But this stops all other tests.
- we used a time_t (long) type in smalltest.c instead of a long long type.
PR gprofng/30602
* configure.ac: Launch only native testing.
* configure: Rebuild.
* testsuite/config/default.exp: Set TEST_TIMEOUT.
* testsuite/gprofng.display/setpath_map.exp: Use return instead of exit.
* testsuite/gprofng.display/gp-archive.exp: Likewise.
* testsuite/gprofng.display/gp-collect-app_F.exp: Likewise.
* testsuite/gprofng.display/display.exp: Delete an unnecessary test
for native testing.
* testsuite/lib/display-lib.exp (run_native_host_cmd): Add timeout.
* testsuite/lib/smalltest.c: Use a long long type instead of time_t.
Alan Modra [Mon, 10 Jul 2023 22:49:20 +0000 (08:19 +0930)]
Re: Keeping track of rs6000-coff archive element pointers
bfd/
* coff-rs6000.c (add_range): Revise comment, noting possible fail.
(_bfd_xcoff_openr_next_archived_file): Start with clean ranges.
binutils/
* bfdtest1.c: Enhance to catch errors on second scan.
Alan Modra [Wed, 5 Jul 2023 13:53:51 +0000 (23:23 +0930)]
Use run_host_cmd to run $CC and other no-section-header test fixes
We should be using run_host_cmd everywhere we invoke a compiler in the
ld testsuite, if we want to use ld/ld-new just built. run_host_cmd
properly inserts $gcc_B_opt in cases where a user wants to test
binutils with a newly built compiler, ie. when $CC specifies -B itself.
Also, it is not good practice to exclude tests when non-native except
of course those tests that run a target binary. Compiling and linking
often shows up problems.
* testsuite/ld-elf/no-section-header.exp (binutils_run_test):
Use run_host_cmd to invoke $CC_FOR_TARGET. Run all tests
non-native too, except for attempting to run the binaries.
Run tests for ELF in general, not just linux.
* testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Allow localentry
symbol decoration, and support either sorting of symbols.
* testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise.
* testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise.
* testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Accept D function syms.
* testsuite/ld-elf/start-shared-noheader-sysv.rd: Accept
mips-sgi-irix symbol output.
* testsuite/ld-elf/start-shared-noheader.nd: Likewise.
YunQiang Su [Fri, 30 Jun 2023 05:14:51 +0000 (13:14 +0800)]
ld: Use [list ] syntax to define run_tests in indirect.exp
Currently, the var run_tests is defined by syntax {{}},
while in this case, variables cannot be used.
Thus $NOPIE_CFLAGS and $NOPIE_LDFLAGS are passed to cmd as names
instead of values:
gcc ... $NOPIE_CFLAGS -c .../indirect5a.c -o tmpdir/indirect5a.o
Let's use [list [list ]] syntax instead.
ld/ChangeLog:
* testsuite/ld-elf/indirect.exp(run_tests): use [list [list]]
syntax instead of {{}}.
YunQiang Su [Mon, 3 Jul 2023 04:43:21 +0000 (12:43 +0800)]
ld: fix plugin tests for MIPS PIC
On MIPS, for PIC objects, symbols may reference 2 times:
once from the caller, and once from GOT.
Thus ld may complains 2 times about "undefined reference".
So we add a new "#?" line to every effected testsuite.
WANG Xuerui [Sun, 2 Jul 2023 10:14:22 +0000 (18:14 +0800)]
LoongArch: gas: Fix shared builds
Formerly an include of libbfd.h was added in commit 56576f4a722
("LoongArch: gas: Add support for linker relaxation."), in order to
allow calling _bfd_read_unsigned_leb128 from gas, but doing so broke
shared builds. Commit d2fddb6d783 fixed this reference but did not
remove the now unnecessary inclusion of libbfd.h. The gas_assert macro
expands into a conditional call to abort(), but "abort" is re-defined to
_bfd_abort in libbfd.h, so the extra include breaks any gas_assert
usage, and should be removed.
gas/ChangeLog:
* config/tc-loongarch.c: Don't include libbfd.h.
Fixes: d2fddb6d783 ("LoongArch: Fix ld "undefined reference" error with --enable-shared") Signed-off-by: WANG Xuerui <git@xen0n.name>
In our GUI project (https://savannah.gnu.org/projects/gprofng-gui), we use
the output of gprofng to display the data. Sometimes this data is corrupted.
gprofng/ChangeLog
2023-06-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* src/ipc.cc (ipc_doWork): Fix data race.
* src/ipcio.cc (IPCresponse::print): Fix data race.
Remove unused variables and functions.
* src/ipcio.h: Declare two variables.
* src/StringBuilder.cc (StringBuilder::write): New function.
* src/StringBuilder.h: Likewise.
Certain extensions require two levels of implications. For example,
zvkng implies zvkn and zvkn implies zvkned. Enabling zvkng should also
enable zvkned.
This patch fixes this behavior.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_add_implicit_subsets): Allow nested
implications for extensions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This extension adds the following instructions:
- vandn.[vv,vx]
- vbrev.v
- vbrev8.v
- vrev8.v
- vclz.v
- vctz.v
- vcpop.v
- vrol.[vv,vx]
- vror.[vv,vx,vi]
- vwsll.[vv,vx,vi]
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvbb.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add 'l' as new format
string directive.
(riscv_ip): Likewise.
* testsuite/gas/riscv/zvbb.d: New test.
* testsuite/gas/riscv/zvbb.s: New test.
Tom Tromey [Fri, 30 Jun 2023 01:38:10 +0000 (19:38 -0600)]
Fix regressions caused by agent expression C++-ification
Simon pointed out that my agent expression C++-ification patches
caused a regression with the native-gdbserver target board. The bug
is that append_const is supposed to write in big-endian order, but I
switched this by mistake.
Philipp Tomsich [Fri, 30 Jun 2023 14:02:11 +0000 (16:02 +0200)]
binutils: NEWS: announce new RISC-V extensions
We picked up support for a few new extensions over the last weeks
(this may need further updating prior to the next release), list them
in the NEWS file.
binutils/ChangeLog:
* binutils/NEWS: announce suuport for the new RISC-V
extensions (Zicond, Zfa, XVentanaCondOps).
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
This patch adds support for the RISC-V Zfa extension,
which introduces additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of FP registers in case XLEN < FLEN
* fleq/fltq (quiet comparison instructions)
Zfa defines its instructions in combination with the following
extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
This patch is based on an earlier version from Tsukasa OI:
https://sourceware.org/pipermail/binutils/2022-September/122939.html
Most significant change to that commit is the switch from the rs1-field
value to the actual floating-point value in the last operand of the fli*
instructions. Everything that strtof() can parse is accepted and
the '%a' printf specifier is used to output hex floating-point literals
in the disassembly.
The Zfa specification is frozen (and has passed public review). It is
available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
https://github.com/riscv/riscv-isa-manual/releases
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for 'Zfa' extension.
(riscv_multi_subset_supports_ext): Likewise.
(riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
gas/ChangeLog:
* config/tc-riscv.c (flt_lookup): New helper to lookup a float value
in an array.
(validate_riscv_insn): Add 'Wfv' as new format string directive.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Add floating-point chapter and describe
limiations of the Zfa FP literal parsing.
* testsuite/gas/riscv/zfa-32.d: New test.
* testsuite/gas/riscv/zfa-32.s: New test.
* testsuite/gas/riscv/zfa-64.d: New test.
* testsuite/gas/riscv/zfa-64.s: New test.
* testsuite/gas/riscv/zfa-fail.d: New test.
* testsuite/gas/riscv/zfa-fail.l: New test.
* testsuite/gas/riscv/zfa-fail.s: New test.
* testsuite/gas/riscv/zfa.d: New test.
* testsuite/gas/riscv/zfa.s: New test.
* testsuite/gas/riscv/zfa.s: New test.
WANG Xuerui [Thu, 29 Jun 2023 16:35:04 +0000 (00:35 +0800)]
LoongArch: Deprecate $v[01], $fv[01] and $x names per spec
As outlined in the LoongArch ELF psABI spec [1], it is actually already
2 versions after the initial LoongArch support, and the $v[01] and
$fv[01] names should really get sunset by now.
In addition, the "$x" name for $r21 was never included in any released
version of the ABI spec, and such usages are all fixed to say just $r21
for every project I could think of that accepted a LoongArch port.
Plus, the upcoming LSX/LASX support makes use of registers named
"$vrNN" and "$xrNN", so having "$vN" and "$x" alongside would almost
certainly create confusion for developers.
Issue warnings for such usages per the deprecation procedure detailed
in the spec, so we can finally remove support in the next release cycle
after this.
* config/tc-loongarch.c: Init canonical register ABI name
mappings and deprecated register names.
(loongarch_args_parser_can_match_arg_helper): Warn in case of
deprecated register name usage.
* testsuite/gas/loongarch/deprecated_reg_aliases.d: New test.
* testsuite/gas/loongarch/deprecated_reg_aliases.l: Likewise.
* testsuite/gas/loongarch/deprecated_reg_aliases.s: Likewise.
include/ChangeLog:
* opcode/loongarch.h: Rename global variables.
opcodes/ChangeLog:
* loongarch-opc.c: Rename the alternate/deprecated register name
mappings, and move $x to the deprecated name map.
WANG Xuerui [Thu, 29 Jun 2023 16:35:02 +0000 (00:35 +0800)]
opcodes/loongarch: do not print hex notation for signed immediates
The additional hex notation was minimally useful when one had to
inspect code with heavy bit manipulation, or of unclear signedness, but
it clutters the output, and the style is not regular assembly language
syntax either.
Precisely how one approaches the original use case is not taken care of
in this patch (maybe we want a disassembler option forcing a certain
style for immediates, like for example printing every immediate in
decimal or hexadecimal notation), but at least let's stop the current
practice.
WANG Xuerui [Thu, 29 Jun 2023 16:35:01 +0000 (00:35 +0800)]
opcodes/loongarch: style disassembled address offsets as such
Add a modifier char 'o' telling the disassembler to print the immediate
using the address offset style, and mark the memory access instructions'
offset operands as such.
opcodes/ChangeLog:
* loongarch-dis.c (dis_one_arg): Style disassembled address
offsets as such when the operand has a modifier char 'o'.
* loongarch-opc.c: Add 'o' to operands that represent address
offsets.
WANG Xuerui [Thu, 29 Jun 2023 16:34:58 +0000 (00:34 +0800)]
LoongArch: support disassembling certain pseudo-instructions
Add a flag in the pinfo field for being able to mark certain specialized
matchers as disassembler-only, so some degree of isolation between
assembler-side and disassembler-side can be achieved.
This isolation is necessary, firstly because some pseudo-instructions
cannot be fully described in the opcode table, like `li.[wd]`, so the
corresponding opcode entry cannot have meaningful match/mask values.
Secondly, some of these pseudo-instructions can be realized in more than
one plausible ways; e.g. `li.w rd, <something between 0 and 0x7ff>` can
be realized on LA64 with any of `addi.w`, `addi.d` or `ori`. If we tie
disassembly of such aliases with the corresponding GAS support, only one
canonical form among the above would be recognized as `li.w`, and it
would mildly impact the readability of disassembly output.
People wanting the exact disassembly can always set `-M no-aliases` to
get the original behavior back.
In addition, in certain cases, information is irreversibly lost after
assembling, so perfect round-trip would not be possible in such cases.
For example, `li.w` and `li.d` of immediates within int32_t range
produce the same code; in this patch, `addi.d rd, $zero, imm` is treated
as `li.d`, while `addi.w` and `ori` immediate loads are shown as `li.w`,
due to the expressible value range well within 32 bits.
* loongarch-dis.c: Move register name map declarations to top.
(get_loongarch_opcode_by_binfmt): Consider aliases when
disassembling without the no-aliases option.
(parse_loongarch_dis_option): Support the no-aliases option.
* loongarch-opc.c: Collect pseudo instructions into a new
dedicated table.
Indu Bhagat [Thu, 29 Jun 2023 23:29:12 +0000 (16:29 -0700)]
doc: sframe: update specification for SFRAME_VERSION_2
Add details for the changes made from Version 1 to Version 2 of the format.
Also add details about alignment in the SFrame format. A portion of the
SFrame stack trace format has an unaligned on-disk representation. Add
description at relevant points in the specificatin to clarify the
alignment related details.
Indu Bhagat [Thu, 29 Jun 2023 23:29:09 +0000 (16:29 -0700)]
sframe: bfd: gas: ld: format bump to SFrame version 2
SFrame version 2 encodes the size of repetitive insn block explicitly
in the format. Add information in the SFrame FDE to convey the size
of the block of repeating instructions. This information is used only
for SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK.
Introduce two extra bytes for padding: this ensures that the memory
accesses to the members of the SFrame Frame Descriptor Entry (FDE) are
naturally aligned.
gas generates SFrame section with version SFRAME_VERSION_2 by default.
libsframe provides two new APIs to:
- get an SFrame FDE data from the decoder context, and
- add an SFrame FDE to the encoder context.
The additional argument (for rep_block_size) is useful for SFrame FDEs
where FDE type is SFRAME_FDE_TYPE_PCMASK.
The linker will generate the output SFrame sections in the
SFRAME_VERSION_2 format. If the input sections offered to the linker
are not all in the SFRAME_VERSION_2 format, the linker issues an error
to the user.
objdump/readelf will show the following message to the user if .sframe
section in SFRAME_VERSION_1 format is seen:
"No further information can be displayed. SFrame version not
supported."
In other words, like the rest of the binutils, only the current SFrame
format version, i.e., SFRAME_VERSION_2 is supported by the textual dump
facilities.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Generate an
output SFrame section with version SFRAME_VERSION_2. Also,
error out if the SFrame sections do not all have
SFRAME_VERSION_2.
* elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Generate SFrame
section for plt entries with version SFRAME_VERSION_2.
gas/
* gen-sframe.c (sframe_set_version): Update to SFRAME_VERSION_2.
(output_sframe): Likewise.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-aarch64-1.d: Use SFRAME_VERSION_2.
* gas/cfi-sframe/cfi-sframe-aarch64-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise.
* gas/cfi-sframe/common-empty-1.d: Likewise.
* gas/cfi-sframe/common-empty-2.d: Likewise.
* gas/cfi-sframe/common-empty-3.d: Likewise.
ld/testsuite/
* ld-aarch64/sframe-simple-1.d: Adjust for SFRAME_VERSION_2.
* ld-x86-64/sframe-plt-1.d: Likewise.
* ld-x86-64/sframe-simple-1.d: Likewise.
libsframe/
* libsframe.ver: Add the new APIs.
* sframe.c (sframe_decoder_get_funcdesc_v2): New definition.
(sframe_encoder_add_funcdesc_v2): Likewise.
(sframe_header_sanity_check_p): Include SFRAME_VERSION_2.
(sframe_fre_check_range_p): Get rep_block_size info from SFrame
FDE.
* sframe-dump.c (dump_sframe_header): Add support for
SFRAME_VERSION_2.
(dump_sframe): Inform user if SFrame section in SFRAME_VERSION_1
format is seen.
libsframe/testsuite/
* libsframe.decode/DATA-BE: Regenerated data file.
* libsframe.decode/DATA1: Likewise.
* libsframe.decode/DATA2: Likewise.
* libsframe.find/plt-findfre-1.c: Use new API in the testcase.
include/
* sframe.h: Add member to encode size of the code block of
repeating instructions. Add 2 bytes of padding.
* sframe-api.h (sframe_decoder_get_funcdesc_v2): New
declaration.
(sframe_encoder_add_funcdesc_v2): Likewise.
Indu Bhagat [Thu, 29 Jun 2023 23:28:56 +0000 (16:28 -0700)]
libsframe: add new APIs to get SFrame version
While the SFrame preamble is guaranteed to not change between versions,
providing these access APIs from the SFrame decoder and encoder APIs is
for convenience only. The linker may want to use these APIs as the
format evolves.
include/
* sframe-api.h (sframe_decoder_get_version): New declaration.
(sframe_encoder_get_version): Likewise.
libsframe/
* libsframe/libsframe.ver: Add new APIs.
* libsframe/sframe.c (sframe_decoder_get_version): New
definition.
(sframe_encoder_get_version): Likewise.
projects / thirdparty / binutils-gdb.git / log
