Merge tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu into staging

accel: Introduce AccelClass::cpu_common_[un]realize
accel: Target agnostic code movement
accel/tcg: Cleanups to use CPUState instead of CPUArchState
accel/tcg: Move CPUNegativeOffsetState into CPUState
tcg: Split out tcg init functions to tcg/startup.h
linux-user/hppa: Fix struct target_sigcontext layout
build: Remove --enable-gprof

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmUdsL4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/iYggAvDJEyMCAXSSH97BA
# wZT/2D/MFIhOMk6xrQRnrXfrG70N0iVKz44jl9j7k1D+9BOHcso//DDJH3c96k9A
# MgDb6W2bsWvC15/Qw6BALf5bb/II0MJuCcQvj3CNX5lNkXAWhwIOBhsZx7V9ST1+
# rihN4nowpRWdV5GeCjDGaJW455Y1gc96hICYHy6Eqw1cUgUFt9vm5aYU3FHlat29
# sYRaVYKUL2hRUPPNcPiPq0AaJ8wN6/s8gT+V1UvTzkhHqskoM4ZU89RchuXVoq1h
# SvhKElyULMRzM7thWtpW8qYJPj4mxZsKArESvHjsunGD6KEz3Fh1sy6EKRcdmpG/
# II1vkg==
# =k2Io
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 14:36:46 EDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu: (47 commits)
  tcg/loongarch64: Fix buid error
  tests/avocado: Re-enable MIPS Malta tests (GitLab issue #1884 fixed)
  build: Remove --enable-gprof
  linux-user/hppa: Fix struct target_sigcontext layout
  tcg: Split out tcg init functions to tcg/startup.h
  tcg: Remove argument to tcg_prologue_init
  accel/tcg: Make cpu-exec-common.c a target agnostic unit
  accel/tcg: Make icount.o a target agnostic unit
  accel/tcg: Make monitor.c a target-agnostic unit
  accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h'
  exec: Rename target specific page-vary.c -> page-vary-target.c
  exec: Rename cpu.c -> cpu-target.c
  accel: Rename accel-common.c -> accel-target.c
  accel: Make accel-blocker.o target agnostic
  accel/tcg: Restrict dump_exec_info() declaration
  exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h'
  exec: Make EXCP_FOO definitions target agnostic
  accel/tcg: move ld/st helpers to ldst_common.c.inc
  accel/tcg: Unify user and softmmu do_[st|ld]*_mmu()
  accel/tcg: Remove env_tlb()
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tcg/loongarch64: Fix buid error

Fix:

  In file included from ../tcg/tcg.c:735:
  /home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc: In function ‘tcg_out_vec_op’:
  /home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc:1855:9: error: a label can only be part of a statement and a declaration is not a statement
           TCGCond cond = args[3];
           ^~~~~~~

Signed-off-by: gaosong <gaosong@loongson.cn>
Message-Id: <20230926075819.3602537-1-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/avocado: Re-enable MIPS Malta tests (GitLab issue #1884 fixed)

Commit 18a536f1f8 ("accel/tcg: Always require can_do_io") fixed
the GitLab issue #1884: we can now re-enable those tests.

This reverts commit f959c3d87ccfa585b105de6964a6261e368cc1da.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231003063808.66564-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

build: Remove --enable-gprof

This build option has been deprecated since 8.0.
Remove all CONFIG_GPROF code that depends on that,
including one errant check using TARGET_GPROF.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/hppa: Fix struct target_sigcontext layout

Use abi_ullong not uint64_t so that the alignment of the field
and therefore the layout of the struct is correct.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg init functions to tcg/startup.h

The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend.  The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Remove argument to tcg_prologue_init

We can load tcg_ctx just as easily within the callee.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Make cpu-exec-common.c a target agnostic unit

cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).

Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c.  There is no more target specific
code in this file: make it target agnostic.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Make icount.o a target agnostic unit

Remove the unused "exec/exec-all.h" header. There is
no more target specific code in it: make it target
agnostic (rename using the '-common' suffix). Since
it is TCG specific, move it to accel/tcg, updating
MAINTAINERS.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-11-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Make monitor.c a target-agnostic unit

Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h'

accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Rename target specific page-vary.c -> page-vary-target.c

This matches the target agnostic 'page-vary-common.c' counterpart.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Rename cpu.c -> cpu-target.c

We have exec/cpu code split in 2 files for target agnostic
("common") and specific. Rename 'cpu.c' which is target
specific using the '-target' suffix. Update MAINTAINERS.
Remove the 's from 'cpus-common.c' to match the API cpu_foo()
functions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel: Rename accel-common.c -> accel-target.c

We use the '-common.c' suffix for target agnostic units.
This file is target specific, rename it using the '-target'
suffix.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel: Make accel-blocker.o target agnostic

accel-blocker.c is not target specific, move it to system_ss[].

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Restrict dump_exec_info() declaration

In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h'

While these functions are not TCG specific, they are not target
specific. Move them to "exec/cpu-common.h" so their callers don't
have to be tainted as target specific.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Make EXCP_FOO definitions target agnostic

The EXCP_* definitions don't need to be target specific,
move them to "exec/cpu-common.h".

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: move ld/st helpers to ldst_common.c.inc

A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.

Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Unify user and softmmu do_[st|ld]*_mmu()

The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove env_tlb()

The function is no longer used to access the TLB,
and has been replaced by cpu->neg.tlb.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Merge comment update patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Use CPUState in atomicity helpers

Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Modify atomic_mmu_lookup() to use CPUState

The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Modify memory access functions to use CPUState

do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Modify probe_access_internal() to use CPUState

probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Modify tlb_*() to use CPUState

Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.

Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Remove TCGContext.tlb_fast_offset

Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.

Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove env_neg()

Replace the single use within env_tlb() and remove.

Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove cpu_set_cpustate_pointers

This function is now empty, so remove it.  In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Replace CPUState.env_ptr with cpu_env()

Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmUdbkgACgkQnKSrs4Gr
# c8j03Af/Ww5CrGjvcTefvm6W65zTh6Di6ymUn59eqIpjpDbWTPruhnsrJFtNEo3Z
# wv8hcxgc+wP8Y7BbZiwiNrSZsjQ1y8rReeO+Eoe9YZoRTMy8aJYaASXvs9TWZoMT
# IjqPR6YEAEzh+30zLaPje/Lfy49Ni2Lqsg/fKsozl0b2LrZoEN5xJMHqI8CuRrzB
# JmtX4nCkaf/P0yvW1MAp4Dxiuqgk3Z7n2+F1Qrjklw1eSZsc6Mi9QmEwuzX4rnKO
# tzU2EApDWNvFQ604H86XHqWqXIw4C+7nNl81kOIZhUqIRamPD8bCNAeijkthmdLF
# l4EIOqSDX8nkxuddRS7jQmHxlIw18g==
# =26iN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 09:53:12 EDT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
  osdep: set _FORTIFY_SOURCE=2 when optimization is enabled

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu into staging

Migration Pull request (20231004)

Hi

In this series:

* make sure migration-tests get 0's (daniil)
  Notice that this creates a checkpatch negative, everything on that
  file is volatile, no need to add a comment.

* RDMA fix from li
* MAINTAINERS
  Get peter and fabiano to become co-maintainers of migration
  Get Entry fro migration-rdma for Li Zhijian
* Create field_exists() (peterx)
* Improve error messages (Tejus)

Please apply.

s

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUdXTwACgkQ9IfvGFhy
# 1yPFPg//awd8HpoLs1Cq6zquBRivZOS88+tstwlBIODoU3lwPlriGU9Wquv8MqxG
# NGvcUKVsv1XXsRWYsqN3OPV6m+uRZpKrFfXEnIGNpHptf/e6KrrDGAttukalhx4n
# hJXCAActe9DlujSu+QI0L/j7R9S33zvLS46sjq7jaYLQLMzuEf5i+hiEPWfPP7AT
# 0SjrtpFaqIOGY4+VKteDirP7zJtu1+WEMVFgtAUeh3c0R8UAOsxVzBjfM3+KagIx
# NnYesFZoaOjVi1Xi1cRII7FmeKZ2OU7VBdYN9h3Y+dRIRjzF/YZOdt6Ypgb1c4gw
# ohpWJWT2tHU1z7nguSFpnqtu8xCeGhwAy+HUn/Az0TP6SCtpKRh23bZpwbfWIrHs
# eSZB6tO/eC/noQ5/d2cSs6pz7P77MkhTfxwD2+n9R4O36vSHEj3dGF0JbgCPr/Kw
# 0qfch9BQkFkAec3kiaZO/JOQ1rJuIMTbdER9gDzIODpUIc5QExs1dFwLoz5IRcpQ
# A1kOqVatMmm8jrvC3lEw76FjMX5pv11DKcS75ogWsSZHGk/jpXWABPEtiamzloqv
# c6owc5f09etkQCzT5ME8AZyZRjt7eeqIxZDZlGCjHbqZ+w/xuDsFJrEdg8YJvRLw
# AmsU5rRT2JV4lDNgZ1XG+xY9HF5LhAXYet5+UrCMBpFGk7JnHIw=
# =il/A
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 08:40:28 EDT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu:
  migration: Unify and trace vmstate field_exists() checks
  migration: file URI offset
  migration: file URI
  s390x/a-b-bios: zero the first byte of each page on start
  i386/a-b-bootblock: zero the first byte of each page on start
  i386/a-b-bootblock: factor test memory addresses out into constants
  migration/rdma: zore out head.repeat to make the error more clear
  migration: Add co-maintainers for migration
  MAINTAINERS: Add entry for rdma migration
  migration: Update error description outside migration.c
  migration/vmstate: Introduce vmstate_save_state_with_err

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'bsd-user-mmap-pull-request' of https://gitlab.com/bsdimp/qemu into staging

bsd-user mmap and exec branches from gsoc

This pull request represents the mmap and exec changes from Karim Taha
for his GSoC project.

They represent all the mmap and exec related system calls and get bsd-user to
the point that a dynamic hello-world works (at least for armv7).

There are a couple of patch check errors, but they are the lessor evil: I made
purposely bad style choices to ensure all the commits compiled (and i undid the
style choices in subsequent commits).

I pushed an earlier version to gitlab, and all but the riscv64 pipelines were
green.  Since bsd-user doesn't change anything related to ricsv64 (there's no
support in qemu-project repo, though we do have it in the bsd-user fork: coming
soon).

I think this is good to go.

https://gitlab.com/bsdimp/qemu.git

Warner

# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmUcpC4ACgkQbBzRKH2w
# EQDD9xAA3Rg0AnfnFrd+AoWRb/1/gOuO0v+dEGXj50qnGY8OmHeYtg3XecYPArBq
# EicZzL/OG7UZKMl5OfrmGP9tbr32yfeRUTe3AGGHfmnSb11q0yeSaEFZI7felLHj
# 9nlq4H/2EDRrY+7EnG1TWqtnuqDJAJf/7M0giiVxIk77XGX+USUNPOSG4NP/yc8E
# D5p2GN23pUsvnI0jBZkyP3gyeXVNCNG5+KobwqJM3r6OjEiTRmLEVBw98YzG12bh
# OY9ekMtVUKHi4Cvsf+2TtkDGRya0wX4uqm4UB1TtV1VUDoCWhYgEKBHp3ozCoVjB
# J+ygbx7/jNfY53cpgEpKUBFH7rnOq1yQQ+ad5Ap5hbp4j6WSvPwdp1N3RCnkZzd/
# L50VIaySd+P6enAgPO5Mbt3kMMVd/eDGhQDWdzNToIjyhXBb5hUNfumg9AgdEwTh
# rW/kKT39YLYWLO123hIJCy2CKU9nvoea9588ExkKb22v0ltrtDcAlWfCbZvZYxNN
# wRzh+MFBt7Cd/bqk7HaJ0J/YyPToqImoUjNuBnBSDPqZQP2H4U8v/FoICQ0mm5kR
# jZCmGLMEP1PiDlusjUjaW0iamHvXiSP8KEzaAbIxx5UUiTWTTkQm4CKY/xPxC9VQ
# 0ygJqJVrKHlNrAY9u6ggJAXtorVwmC55z4ZqIVQH6cbzUYFMuJU=
# =WpL4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 19:30:54 EDT
# gpg:                using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg:                 aka "Warner Losh <imp@village.org>" [unknown]
# gpg:                 aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD  E1B7 6C1C D128 7DB0 1100

* tag 'bsd-user-mmap-pull-request' of https://gitlab.com/bsdimp/qemu: (51 commits)
  bsd-user: Add stubs for vadvise(), sbrk() and sstk()
  bsd-user: Implement shmat(2) and shmdt(2)
  bsd-user: Implement shmctl(2)
  bsd-user: Implement shm_unlink(2) and shmget(2)
  bsd-user: Implement shm_open(2)
  bsd-user: Implement do_obreak function
  bsd-user: Implement mincore(2)
  bsd-user: Implment madvise(2) to match the linux-user implementation.
  bsd-user: Implement mlock(2), munlock(2), mlockall(2), munlockall(2), minherit(2)
  bsd-user: Implement msync(2)
  bsd-user: Implement mprotect(2)
  bsd-user: Implement mmap(2) and munmap(2)
  bsd-user: Introduce bsd-mem.h to the source tree
  bsd-user: Implement shmid_ds conversion between host and target.
  bsd-user: Implement ipc_perm conversion between host and target.
  bsd-user: Implement target_set_brk function in bsd-mem.c instead of os-syscall.c
  bsd-user: Add bsd-mem.c to meson.build
  bsd-user: Implement shm_rename(2) system call
  bsd-user: Implement shm_open2(2) system call
  bsd-user: Introduce freebsd/os-misc.h to the source tree
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'misc-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

Misc fixes and cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmUcClAcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5R5FD/9oeCDGXVzkm52K0DoW
# 90N5Blda/3exvnS49TEz+rbIxXcy9IBxEKV3aPesCDw0V7Vxy6ZijPA/aHKzQEeP
# DOX+0sELWLFRKvNNuXLxPlZcEQDgXkgqoCKf+0jp5oH7TAL2upezMhIr4XlUwG3v
# rKQstpmr0Jm9sjsBTL9uIZCJpzglWk7CIbgAlBjOX6MFz0HAManrhBBuguvSZtrW
# wYWrdkBEdTK6ranBvRA3IKi4ux/pmNsCpCtuOVT+WOLjC/wmJIE8+pBzlK9eOdqW
# bPaxuu4XK1qao1+z6EyoaUtH/UW50EUInGq7aR2Z31/S1BLxqEpFCCnPAw7RGYZO
# VlAuiR2U7K7AHFDfp8fJaUNH8a3Zh2wzpba5cyQ7LqVNRVbDhx65sQZw0pA3pjfi
# JG0brIpWldD7auJtZTdCxXcoHWxeyfqqzH3a6GpeZzrRwuuAwxv0+yGF3Y2cMJ7+
# lV9JVcei5M+Acq1UfO4BCC77UpXs4Jl0+zyRq02vOJFnfwcLMQ7VjD2A3e00yodj
# F5cPnbacI212ynNm925RNv45svaY1hD2Z8kJRV/15/04m9dRv4WHOOTuF3iwZjt1
# 9gp/p949tcEL/rBbDF+9QZiVHTWurVCQ0ZFnNhVnbKm+Hm5nHk5slc2p+VXQ0KB0
# E2mN1irWzLov0K1YZTfetiXo8A==
# =3ol2
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 08:34:24 EDT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'misc-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  chardev/char-pty: Avoid losing bytes when the other side just (re-)connected
  hw/display/ramfb: plug slight guest-triggerable leak on mode setting
  hw/pc: remove needless includes
  hw/core: remove needless includes
  analyze-migration: ignore RAM_SAVE_FLAG_MULTIFD_FLUSH
  ui/gtk: fix UI info precondition
  win32: avoid discarding the exception handler
  ui: add XBGR8888 and ABGR8888 in drm_format_pixman_map
  ui/console: sanitize search in qemu_graphic_console_is_multihead()
  ui/console: eliminate QOM properties from qemu_console_is_multihead()
  ui/console: only walk QemuGraphicConsoles in qemu_console_is_multihead()
  ui/console: make qemu_console_is_multihead() static
  input: Allow to choose console with qemu_input_is_absolute

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

osdep: set _FORTIFY_SOURCE=2 when optimization is enabled

Currently we set _FORTIFY_SOURCE=2 as a compiler argument when the
meson 'optimization' setting is non-zero, the compiler is GCC and
the target is Linux.

While the default QEMU optimization level is 2, user could override
this by setting CFLAGS="-O0" or --extra-cflags="-O0" when running
configure and this won't be reflected in the meson 'optimization'
setting. As a result we try to enable _FORTIFY_SOURCE=2 and then the
user gets compile errors as it only works with optimization.

Rather than trying to improve detection in meson, it is simpler to
just check the __OPTIMIZE__ define from osdep.h.

The comment about being incompatible with clang appears to be
outdated, as compilation works fine without excluding clang.

In the coroutine code we must set _FORTIFY_SOURCE=0 to stop the
logic in osdep.h then enabling it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20231003091549.223020-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

migration: Unify and trace vmstate field_exists() checks

For both save/load we actually share the logic on deciding whether a field
should exist.  Merge the checks into a helper and use it for both save and
load.  When doing so, add documentations and reformat the code to make it
much easier to read.

The real benefit here (besides code cleanups) is we add a trace-point for
this; this is a known spot where we can easily break migration
compatibilities between binaries, and this trace point will be critical for
us to identify such issues.

For example, this will be handy when debugging things like:

https://gitlab.com/qemu-project/qemu/-/issues/932

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230906204722.514474-1-peterx@redhat.com>

migration: file URI offset

Allow an offset option to be specified as part of the file URI, in
the form "file:filename,offset=offset", where offset accepts the common
size suffixes, or the 0x prefix, but not both.  Migration data is written
to and read from the file starting at offset.  If unspecified, it defaults
to 0.

This is needed by libvirt to store its own data at the head of the file.

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-3-git-send-email-steven.sistare@oracle.com>

migration: file URI

Extend the migration URI to support file:<filename>.  This can be used for
any migration scenario that does not require a reverse path.  It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.

For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running.  If ram is not so configured, then the user
is advised to stop the guest first.  Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly.  That issue is being addressed in the
"fixed-ram" patch series.

Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-2-git-send-email-steven.sistare@oracle.com>

s390x/a-b-bios: zero the first byte of each page on start

Same as with the x86 verison of this test, we relied on the contents of
all pages in RAM to be the same across the entire test range, which is
very fragile. Zero the first byte of each page before running the
increment loop to fix this.

Fixes: 5571dc824b ("tests/migration: Enable the migration test on s390x, too")
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-4-d-tatianin@yandex-team.ru>

i386/a-b-bootblock: zero the first byte of each page on start

The migration qtest all the way up to this point used to work by sheer
luck relying on the contents of all pages from 1MiB to 100MiB to contain
the same one value in the first byte initially.

This easily breaks if we reduce the amount of RAM for the test instances
from 150MiB to e.g 110MiB since that makes SeaBIOS dirty some of the
pages starting at about 0x5dd2000 (~93 MiB) as it reuses those for the
HighMemory allocator since commit dc88f9b72df ("malloc: use large
ZoneHigh when there is enough memory").

This would result in the following errors:
    12/60 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test                 ERROR           2.74s   killed by signal 6 SIGABRT
    stderr:
    Memory content inconsistency at 5dd2000 first_byte = cc last_byte = cb current = 9e hit_edge = 1
    Memory content inconsistency at 5dd3000 first_byte = cc last_byte = cb current = 89 hit_edge = 1
    Memory content inconsistency at 5dd4000 first_byte = cc last_byte = cb current = 23 hit_edge = 1
    Memory content inconsistency at 5dd5000 first_byte = cc last_byte = cb current = 31 hit_edge = 1
    Memory content inconsistency at 5dd6000 first_byte = cc last_byte = cb current = 70 hit_edge = 1
    Memory content inconsistency at 5dd7000 first_byte = cc last_byte = cb current = ff hit_edge = 1
    Memory content inconsistency at 5dd8000 first_byte = cc last_byte = cb current = 54 hit_edge = 1
    Memory content inconsistency at 5dd9000 first_byte = cc last_byte = cb current = 64 hit_edge = 1
    Memory content inconsistency at 5dda000 first_byte = cc last_byte = cb current = 1d hit_edge = 1
    Memory content inconsistency at 5ddb000 first_byte = cc last_byte = cb current = 1a hit_edge = 1
    and in another 26 pages**
    ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)

Fix this by always zeroing the first byte of each page in the range so
that we get consistent results no matter the initial contents.

Fixes: ea0c6d62391 ("test: Postcopy")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-3-d-tatianin@yandex-team.ru>

i386/a-b-bootblock: factor test memory addresses out into constants

So that we have less magic numbers to deal with. This also allows us to
reuse these in the following commits.

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-2-d-tatianin@yandex-team.ru>

migration/rdma: zore out head.repeat to make the error more clear

Previously, we got a confusion error that complains
the RDMAControlHeader.repeat:
qemu-system-x86_64: rdma: Too many requests in this message (3638950032).Bailing.

Actually, it's caused by an unexpected RDMAControlHeader.type.
After this patch, error will become:
qemu-system-x86_64: Unknown control message QEMU FILE

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230926100103.201564-2-lizhijian@fujitsu.com>

migration: Add co-maintainers for migration

Per the qemu upstream call a few hours ago, proposing Fabiano and myself as
the co-maintainer for migration subsystem to help Juan.

Cc: Fabiano Rosas <farosas@suse.de>
Cc: Juan Quintela <quintela@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003143847.9245-1-peterx@redhat.com>

MAINTAINERS: Add entry for rdma migration

It's not obvious to many that RDMA migration is in Odd Fixes stage for a
long time.  Add an explicit sub entry for it (besides migration, which
already covers the rdma files) to be clear on that, meanwhile add Zhijian
as Reviewer, so Zhijian can see the patches and review when he still has
the bandwidth.

Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Zhijian Li (Fujitsu) <lizhijian@fujitsu.com>
Cc: Fabiano Rosas <farosas@suse.de>
Acked-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230925133441.265455-1-peterx@redhat.com>

migration: Update error description outside migration.c

A few code paths exist in the source code,where a migration is
marked as failed via MIGRATION_STATUS_FAILED, but the failure happens
outside of migration.c

In such cases, an error_report() call is made, however the current
MigrationState is never updated with the error description, and hence
clients like libvirt never know the actual reason for the failure.

This patch covers such cases outside of migration.c and updates the
error description at the appropriate places.

Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-3-tejus.gk@nutanix.com>

migration/vmstate: Introduce vmstate_save_state_with_err

Currently, a few code paths exist in the function vmstate_save_state_v,
which ultimately leads to a migration failure. However, an update in the
current MigrationState for the error description is never done.

vmstate.c somehow doesn't seem to allow the use of migrate_set_error due
to some dependencies for unit tests. Hence, this patch introduces a new
function vmstate_save_state_with_err, which will eventually propagate
the error message to savevm.c where a migrate_set_error call can be
eventually done.

Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-2-tejus.gk@nutanix.com>

bsd-user: Add stubs for vadvise(), sbrk() and sstk()

The above system calls are not supported by qemu.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-24-kariem.taha2.7@gmail.com>

bsd-user: Implement shmat(2) and shmdt(2)

Use `WITH_MMAP_LOCK_GUARD` instead of mmap_lock() and mmap_unlock(),
to match linux-user implementation, according to the following commits:

69fa2708a216df715ba5102a0f98468b540a464e linux-user: Use WITH_MMAP_LOCK_GUARD in target_{shmat,shmdt}
ceda5688b650646248f269a992c06b11148c5759 linux-user: Fix shmdt

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Message-Id: <20230925182709.4834-23-kariem.taha2.7@gmail.com>

bsd-user: Implement shmctl(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-22-kariem.taha2.7@gmail.com>

bsd-user: Implement shm_unlink(2) and shmget(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-21-kariem.taha2.7@gmail.com>

bsd-user: Implement shm_open(2)

Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-20-kariem.taha2.7@gmail.com>

bsd-user: Implement do_obreak function

Match linux-user, by manually applying the following commits, in order:

d28b3c90cfad1a7e211ae2bce36ecb9071086129   linux-user: Make sure initial brk(0) is page-aligned
15ad98536ad9410fb32ddf1ff09389b677643faa   linux-user: Fix qemu brk() to not zero bytes on current page
dfe49864afb06e7e452a4366051697bc4fcfc1a5   linux-user: Prohibit brk() to to shrink below initial heap address
eac78a4b0b7da4de2c0a297f4d528ca9cc6256a3   linux-user: Fix signed math overflow in brk() syscall
c6cc059eca18d9f6e4e26bb8b6d1135ddb35d81a   linux-user: Do not call get_errno() in do_brk()
e69e032d1a8ee8d754ca119009a3c2c997f8bb30   linux-user: Use MAP_FIXED_NOREPLACE for do_brk()
cb9d5d1fda0bc2312fc0c779b4ea1d7bf826f31f   linux-user: Do nothing if too small brk is specified
2aea137a425a87b930a33590177b04368fd7cc12   linux-user: Do not align brk with host page size

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-19-kariem.taha2.7@gmail.com>

bsd-user: Implement mincore(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-18-kariem.taha2.7@gmail.com>

bsd-user: Implment madvise(2) to match the linux-user implementation.

Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-17-kariem.taha2.7@gmail.com>

bsd-user: Implement mlock(2), munlock(2), mlockall(2), munlockall(2), minherit(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-16-kariem.taha2.7@gmail.com>

bsd-user: Implement msync(2)

Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-15-kariem.taha2.7@gmail.com>

bsd-user: Implement mprotect(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-14-kariem.taha2.7@gmail.com>

bsd-user: Implement mmap(2) and munmap(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-13-kariem.taha2.7@gmail.com>

bsd-user: Introduce bsd-mem.h to the source tree

Preserve the copyright notice and help with the 'Author' info for
subsequent changes to the file.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-12-kariem.taha2.7@gmail.com>

bsd-user: Implement shmid_ds conversion between host and target.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-11-kariem.taha2.7@gmail.com>

bsd-user: Implement ipc_perm conversion between host and target.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-10-kariem.taha2.7@gmail.com>

bsd-user: Implement target_set_brk function in bsd-mem.c instead of os-syscall.c

The definitions and variables names matches the corresponding ones in
linux-user/syscall.c, for making later implementation of do_obreak easier

Co-authored-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-9-kariem.taha2.7@gmail.com>

bsd-user: Add bsd-mem.c to meson.build

Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-8-kariem.taha2.7@gmail.com>

bsd-user: Implement shm_rename(2) system call

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-7-kariem.taha2.7@gmail.com>

bsd-user: Implement shm_open2(2) system call

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230925182709.4834-6-kariem.taha2.7@gmail.com>

bsd-user: Introduce freebsd/os-misc.h to the source tree

To preserve the copyright notice and help with the 'Author' info for
subsequent changes to the file.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-5-kariem.taha2.7@gmail.com>

bsd-user: Declarations for ipc_perm and shmid_ds conversion functions

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-4-kariem.taha2.7@gmail.com>

bsd-user: Implement struct target_shmid_ds

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-3-kariem.taha2.7@gmail.com>

bsd-user: Implement struct target_ipc_perm

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182709.4834-2-kariem.taha2.7@gmail.com>

bsd-user: Implement pdfork(2) system call.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-29-kariem.taha2.7@gmail.com>

bsd-user: Implement rfork(2) system call.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-28-kariem.taha2.7@gmail.com>

bsd-user: Implement fork(2) and vfork(2) system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-27-kariem.taha2.7@gmail.com>

bsd-user: Implement pdgetpid(2) and the undocumented setugid.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-26-kariem.taha2.7@gmail.com>

bsd-user: Implement setloginclass(2) and getloginclass(2) system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-25-kariem.taha2.7@gmail.com>

bsd-user: Implement wait4(2) and wait6(2) system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-24-kariem.taha2.7@gmail.com>

bsd-user: Implement execve(2) and fexecve(2) system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-23-kariem.taha2.7@gmail.com>

bsd-user: Implement procctl(2) along with necessary conversion functions.

Implement t2h_procctl_cmd, h2t_reaper_status, h2t_reaper_pidinfo and h2t/t2h reaper_kill conversion functions.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-22-kariem.taha2.7@gmail.com>

bsd-user: Implement freebsd_exec_common, used in implementing execve/fexecve.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-21-kariem.taha2.7@gmail.com>

bsd-user: Implement get_filename_from_fd.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-20-kariem.taha2.7@gmail.com>

bsd-user: Implement getpriority(2) and setpriority(2).

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-19-kariem.taha2.7@gmail.com>

bsd-user: Add stubs for profil(2), ktrace(2), utrace(2) and ptrace(2).

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-18-kariem.taha2.7@gmail.com>

bsd-user: Implement get/set[resuid/resgid/sid] and issetugid.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-17-kariem.taha2.7@gmail.com>

bsd-user: Implement several get/set system calls:

getpid(2), getppid(2), getpgrp(2)
setreuid(2), setregid(2)
getuid(2), geteuid(2), getgid(2), getegid(2), getpgid(2)
setuid(2), seteuid(2), setgid(2), setegid(2), setpgid(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-16-kariem.taha2.7@gmail.com>

bsd-user: Implement getrlimit(2) and setrlimit(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-15-kariem.taha2.7@gmail.com>

bsd-user: Implement getrusage(2).

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-14-kariem.taha2.7@gmail.com>

bsd-user: Implement umask(2), setlogin(2) and getlogin(2)

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-13-kariem.taha2.7@gmail.com>

bsd-user: Implement getgroups(2) and setgroups(2) system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-12-kariem.taha2.7@gmail.com>

bsd-user: Get number of cpus.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-11-kariem.taha2.7@gmail.com>

bsd-user: Implement host_to_target_waitstatus conversion.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-10-kariem.taha2.7@gmail.com>

bsd-user: Implement host_to_target_rusage and host_to_target_wrusage.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-9-kariem.taha2.7@gmail.com>

bsd-user: Implement target_to_host_rlim and host_to_target_rlim conversion.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-8-kariem.taha2.7@gmail.com>

bsd-user: Implement target_to_host_resource conversion function

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-7-kariem.taha2.7@gmail.com>

bsd-user: add extern declarations for bsd-proc.c conversion functions

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-6-kariem.taha2.7@gmail.com>

bsd-user: Add freebsd_exec_common and do_freebsd_procctl to qemu.h.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-5-kariem.taha2.7@gmail.com>

bsd-user: Implement host_to_target_siginfo.

Used in wait6 system call

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-4-kariem.taha2.7@gmail.com>

bsd-user: Define procctl(2) related structs

Implement procctl flags and related structs:
struct target_procctl_reaper_status
struct target_procctl_reaper_pidinfo
struct target_procctl_reaper_pids
struct target_procctl_reaper_kill

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-3-kariem.taha2.7@gmail.com>

bsd-user: define TARGET_RFSPAWN for rfork to use vfork(2) semantics, and fix RLIM_INFINITY

RLIM_INFINITY on FreeBSD, OpenBSD and NetBSD has value of ~(1<<63), caculated
one way or another.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230925182425.3163-2-kariem.taha2.7@gmail.com>

tcg: Rename cpu_env to tcg_env

Allow the name 'cpu_env' to be used for something else.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove cpu_neg()

Now that CPUNegativeOffsetState is part of CPUState,
we can reference it directly.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Move can_do_io to CPUNegativeOffsetState

Minimize the displacement to can_do_io, since it may
be touched at the start of each TranslationBlock.
It fits into other padding within the substructure.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>