Jagan Teki [Wed, 2 Feb 2022 16:04:14 +0000 (21:34 +0530)]
drm: of: Lookup if child node has panel or bridge
Devices can also be child nodes when we also control that device
through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
drm_of_find_panel_or_bridge can lookup panel or bridge for a given
device has port and endpoint and it fails to lookup if the device
has a child nodes.
This patch add support to lookup for a child node of the given parent
that isn't either port or ports.
Example OF graph representation of DSI host, which has port but
not has ports and has child panel node.
drm/stm: ltdc: add support for CRC hashing feature
This patch adds the CRC hashing feature supported by some recent hardware
versions of the LTDC. This is useful for test suite such as IGT-GPU-tools
[1] where a CRTC output frame can be compared to a test reference frame
thanks to their respective CRC hash.
drm/stm: Avoid using val uninitialized in ltdc_set_ycbcr_config()
Clang warns:
drivers/gpu/drm/stm/ltdc.c:625:2: warning: variable 'val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/stm/ltdc.c:635:2: note: uninitialized use occurs here
val |= LxPCR_YCEN;
^~~
drivers/gpu/drm/stm/ltdc.c:600:9: note: initialize the variable 'val' to silence this warning
u32 val;
^
= 0
1 warning generated.
Use a return instead of break in the default case to fix the warning.
Add an error message so that this return is not silent, which could hide
issues in the future.
Kees Cook [Fri, 25 Feb 2022 03:56:10 +0000 (19:56 -0800)]
drm/dp: Fix OOB read when handling Post Cursor2 register
The link_status array was not large enough to read the Adjust Request
Post Cursor2 register, so remove the common helper function to avoid
an OOB read, found with a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor':
drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds]
59 | return link_status[r - DP_LANE0_1_STATUS];
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status'
147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the only user of the helper with an open-coded fetch and decode,
similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.
Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Fixes: 79465e0ffeb9 ("drm/dp: Add helper to get post-cursor adjustments") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20220105173507.2420910-1-keescook@chromium.org Signed-off-by: Thierry Reding <treding@nvidia.com>
Hans de Goede [Mon, 21 Feb 2022 22:00:45 +0000 (23:00 +0100)]
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left. Free the largest block, then whittle down again.
Eventually we will have a fully 50% fragmented mm.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Arunpravin [Tue, 22 Feb 2022 17:48:41 +0000 (23:18 +0530)]
drm/selftests: add drm buddy alloc range testcase
- add a test to check the range allocation
- export get_buddy() function in drm_buddy.c
- export drm_prandom_u32_max_state() in lib/drm_random.c
- include helper functions
- include prime number header file
v2:
- add drm_get_buddy() function description (Matthew Auld)
- removed unnecessary test succeeded print
Arunpravin [Mon, 21 Feb 2022 16:45:50 +0000 (22:15 +0530)]
drm: implement a method to free unused pages
On contiguous allocation, we round up the size
to the *next* power of 2, implement a function
to free the unused pages after the newly allocate block.
v2(Matthew Auld):
- replace function name 'drm_buddy_free_unused_pages' with
drm_buddy_block_trim
- replace input argument name 'actual_size' with 'new_size'
- add more validation checks for input arguments
- add overlaps check to avoid needless searching and splitting
- merged the below patch to see the feature in action
- add free unused pages support to i915 driver
- lock drm_buddy_block_trim() function as it calls mark_free/mark_split
are all globally visible
v3(Matthew Auld):
- remove trim method error handling as we address the failure case
at drm_buddy_block_trim() function
v4:
- in case of trim, at __alloc_range() split_block failure path
marks the block as free and removes it from the original list,
potentially also freeing it, to overcome this problem, we turn
the drm_buddy_block_trim() input node into a temporary node to
prevent recursively freeing itself, but still retain the
un-splitting/freeing of the other nodes(Matthew Auld)
- modify the drm_buddy_block_trim() function return type
v5(Matthew Auld):
- revert drm_buddy_block_trim() function return type changes in v4
- modify drm_buddy_block_trim() passing argument n_pages to original_size
as n_pages has already been rounded up to the next power-of-two and
passing n_pages results noop
v6:
- fix warnings reported by kernel test robot <lkp@intel.com>
v7:
- modify drm_buddy_block_trim() function doc description
- at drm_buddy_block_trim() handle non-allocated block as
a serious programmer error
- fix a typo
Arunpravin [Mon, 21 Feb 2022 16:45:49 +0000 (22:15 +0530)]
drm: implement top-down allocation method
Implemented a function which walk through the order list,
compares the offset and returns the maximum offset block,
this method is unpredictable in obtaining the high range
address blocks which depends on allocation and deallocation.
for instance, if driver requests address at a low specific
range, allocator traverses from the root block and splits
the larger blocks until it reaches the specific block and
in the process of splitting, lower orders in the freelist
are occupied with low range address blocks and for the
subsequent TOPDOWN memory request we may return the low
range blocks.To overcome this issue, we may go with the
below approach.
The other approach, sorting each order list entries in
ascending order and compares the last entry of each
order list in the freelist and return the max block.
This creates sorting overhead on every drm_buddy_free()
request and split up of larger blocks for a single page
request.
v2:
- Fix alignment issues(Matthew Auld)
- Remove unnecessary list_empty check(Matthew Auld)
- merged the below patch to see the feature in action
- add top-down alloc support to i915 driver
Arunpravin [Mon, 21 Feb 2022 16:45:48 +0000 (22:15 +0530)]
drm: improve drm_buddy_alloc function
- Make drm_buddy_alloc a single function to handle
range allocation and non-range allocation demands
- Implemented a new function alloc_range() which allocates
the requested power-of-two block comply with range limitations
- Moved order computation and memory alignment logic from
i915 driver to drm buddy
v2:
merged below changes to keep the build unbroken
- drm_buddy_alloc_range() becomes obsolete and may be removed
- enable ttm range allocation (fpfn / lpfn) support in i915 driver
- apply enhanced drm_buddy_alloc() function to i915 driver
v3(Matthew Auld):
- Fix alignment issues and remove unnecessary list_empty check
- add more validation checks for input arguments
- make alloc_range() block allocations as bottom-up
- optimize order computation logic
- replace uint64_t with u64, which is preferred in the kernel
v4(Matthew Auld):
- keep drm_buddy_alloc_range() function implementation for generic
actual range allocations
- keep alloc_range() implementation for end bias allocations
v5(Matthew Auld):
- modify drm_buddy_alloc() passing argument place->lpfn to lpfn
as place->lpfn will currently always be zero for i915
v6(Matthew Auld):
- fixup potential uaf - If we are unlucky and can't allocate
enough memory when splitting blocks, where we temporarily
end up with the given block and its buddy on the respective
free list, then we need to ensure we delete both blocks,
and no just the buddy, before potentially freeing them
- fix warnings reported by kernel test robot <lkp@intel.com>
v7(Matthew Auld):
- revert fixup potential uaf
- keep __alloc_range() add node to the list logic same as
drm_buddy_alloc_blocks() by having a temporary list variable
- at drm_buddy_alloc_blocks() keep i915 range_overflows macro
and add a new check for end variable
v8:
- fix warnings reported by kernel test robot <lkp@intel.com>
v9(Matthew Auld):
- remove DRM_BUDDY_RANGE_ALLOCATION flag
- remove unnecessary function description
v10:
- keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag
and replacing with (end < size) logic fails amdgpu driver load
Ville Syrjälä [Fri, 18 Feb 2022 10:03:58 +0000 (12:03 +0200)]
drm/vc4: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
Linus Walleij [Mon, 3 Jan 2022 11:38:20 +0000 (12:38 +0100)]
drm/panel: Rename Sony ACX424 to Novatek NT35560
A code drop from Sony Mobile reveals that the ACX424 panels are
built around the Novatek NT35560 panel controllers so just bite
the bullet and rename the driver and all basic symbols so that
we can modify this driver to cover any other panels also using
the Novatek NT35560 display controller.
Fbdev's deferred I/O sorts all dirty pages by default, which incurs a
significant overhead. Make the sorting step optional and update the few
drivers that require it. Use a FIFO list by default.
Most fbdev drivers with deferred I/O build a bounding rectangle around
the dirty pages or simply flush the whole screen. The only two affected
DRM drivers, generic fbdev and vmwgfx, both use a bounding rectangle.
In those cases, the exact order of the pages doesn't matter. The other
drivers look at the page index or handle pages one-by-one. The patch
sets the sort_pagelist flag for those, even though some of them would
probably work correctly without sorting. Driver maintainers should update
their driver accordingly.
Sorting pages by memory offset for deferred I/O performs an implicit
bubble-sort step on the list of dirty pages. The algorithm goes through
the list of dirty pages and inserts each new page according to its
index field. Even worse, list traversal always starts at the first
entry. As video memory is most likely updated scanline by scanline, the
algorithm traverses through the complete list for each updated page.
For example, with 1024x768x32bpp each page covers exactly one scanline.
Writing a single screen update from top to bottom requires updating
768 pages. With an average list length of 384 entries, a screen update
creates (768 * 384 =) 294912 compare operation.
Fix this by making the sorting step opt-in and update the few drivers
that require it. All other drivers work with unsorted page lists. Pages
are appended to the list. Therefore, in the common case of writing the
framebuffer top to bottom, pages are still sorted by offset, which may
have a positive effect on performance.
Playing a video [1] in mplayer's benchmark mode shows the difference
(i7-4790, FullHD, simpledrm, kernel with debugging).
VC shows the overhead of video decoding, VO shows the overhead of the
video output. Using unsorted page lists reduces the benchmark's run time
by ~32s/~25%.
v2:
* Make sorted pagelists the special case (Sam)
* Comment on drivers' use of pagelist (Sam)
* Warn about the overhead in comment
fbdev/defio: Early-out if page is already enlisted
Return early if a page is already in the list of dirty pages for
deferred I/O. This can be detected if the page's list head is not
empty. Keep the list head initialized while the page is not enlisted
to make this work reliably.
dt-bindings: display: ssd1307fb: Add myself as binding co-maintainer
The ssd130x DRM driver also makes use of this Device Tree binding to allow
existing users of the fbdev driver to migrate without the need to change
their Device Trees.
Add myself as another maintainer of the binding, to make sure that I will
be on Cc when patches are proposed for it.
Pull the per-line conversion logic into a separate helper function.
This will allow to do line-by-line conversion in other helpers that
convert to a gray8 format.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-2-javierm@redhat.com
drm/panel-edp: Allow querying the detected panel via debugfs
Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.
We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.
Let's add a new debugfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.
NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.
As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.
drm/bridge: ti-sn65dsi86: Use drm_bridge_connector
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge
connector. It should use the normal drm_bridge_connector. Let's switch
to do that, removing all of the custom code.
NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR
support for ti-sn65dsi86 and that would still be a useful thing to do
in the future. It was attempted in the past [1] but put on the back
burner. However, unless we instantly change ti-sn65dsi86 fully from
not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_
supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit
of time when we support both. This is a better way to support the old
way where the driver hand rolls things itself.
A new notes about the implementation here:
* When using the drm_bridge_connector the connector should be created
after all the bridges, so we change the ordering a bit.
* I'm reasonably certain that we don't need to do anything to "free"
the new drm_bridge_connector. If drm_bridge_connector_init() returns
success then we know drm_connector_init() was called with the
`drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a
.destroy() that does all the cleanup. drm_connector_init() calls
__drm_mode_object_add() with a drm_connector_free() that will call
the .destroy().
* I'm also reasonably certain that I don't need to "undo" the
drm_bridge_attach() if drm_bridge_connector_init() fails. The
"detach" function is private and other similar code doesn't try to
undo the drm_bridge_attach() in error cases. There's also a comment
indicating the lack of balance at the top of drm_bridge_attach().
Kevin Tang [Fri, 24 Dec 2021 13:37:00 +0000 (21:37 +0800)]
drm/sprd: check the platform_get_resource() return value
platform_get_resource() may fail and return NULL, so check it's value
before using it.
Reported-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/all/20220117084156.9338-1-kevin3.tang@gmail.com
v1 -> v2:
- new patch
Kevin Tang [Sun, 16 Jan 2022 15:55:47 +0000 (23:55 +0800)]
drm/sprd: fix potential NULL dereference
'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference
it, remove this warning log.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/all/20220117084044.9210-1-kevin3.tang@gmail.com
v1 -> v2:
- Split checking platform_get_resource() return value to a separate patch
- Use dev_warn() instead of removing the warning log
Kevin Tang [Fri, 24 Dec 2021 13:28:31 +0000 (21:28 +0800)]
drm/sprd: remove the selected DRM_KMS_CMA_HELPER in kconfig
On commit 43531edd53f0 ("drm/sprd: add Unisoc's drm kms master"),
adds the config DRM_SPRD, which selects DRM_KMS_CMA_HELPER.
However, commit 09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER
option") just removed the DRM_KMS_CMA_HELPER.
So the select DRM_KMS_CMA_HELPER refers to a non-existing kconfig symbol.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/all/20220117083820.6893-2-kevin3.tang@gmail.com
v1 -> v2:
- fix commit comments long lines issue and drop "On linux-next" comments
Hsin-Yi Wang [Sun, 13 Feb 2022 10:34:36 +0000 (18:34 +0800)]
drm/bridge: anx7625: Support reading edid through aux channel
Support reading edid through aux channel if panel is connected to aux
bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function:
1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move
anx7625_parse_dt() after.
2. Use pm runtime autosuspend since aux transfer function is called
multiple times when reading edid.
3. No-op if aux transfer length is 0.
Initialize default vm_ops in static initialization of the GEM SHMEM funcs,
instead of the mmap code. It's simply better style. GEM helpers will later
set a VMA's vm_ops from the default automatically.
v2:
* also update the drivers that build upon GEM SHMEM
Erico Nunes [Wed, 9 Feb 2022 09:37:00 +0000 (10:37 +0100)]
drm/lima: avoid error task dump attempt when not enabled
Currently when users try to run an application with lima and that hits
an issue such as a timeout, a message saying "fail to save task state"
and "error task list is full" is shown in dmesg.
The error task dump is a debug feature disabled by default, so the
error task list is usually not going to be available at all.
The message can be misleading and creates confusion in bug reports.
We can avoid that code path and that particular message when the user
has not explicitly set the max_error_tasks parameter to enable the
feature.
The IDVS group size feature was missing. It is used on some Bifrost and
Valhall GPUs, and is the last kernel-relevant Bifrost feature we're
missing.
This feature adds an extra IDVS group size field to the JM_CONFIG
register. In kbase, the value is configurable via the device tree; kbase
uses 0xF as a default if no value is specified. Until we find a device
demanding otherwise, let's always set the 0xF default on devices which
support this feature mimicking kbase's behaviour.
Tuning this register slightly improves performance of index-driven
vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is
improved from 1026 to 1037. Geometry-heavy scenes like -bshading are
improved from 1068 to 1098.
Neil Armstrong [Fri, 4 Feb 2022 14:33:37 +0000 (15:33 +0100)]
drm/bridge: dw-hdmi: use safe format when first in bridge chain
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
drm/fb-helper: Clip damage area to written memory range
Write helpers used to mark the complete screen as dirty. This is
wasteful for writes that only change a small portion of the screen.
Fix the problem by computing the damaged area from the written
memory range and perform damage handling accordingly.
drm/fb-helper: Calculate damaged area in separate helper
Add drm_fb_helper_memory_range_to_clip(), a helper function that
accepts an linear range of video memory and converts it into a
rectangle. The computed rectangle describes the damaged area in
terms of scanlines and pixels per scanline.
While at it, make the code more readable by using struct drm_rect
and related helpers.
The code was previously part of the deferred I/O helpers, but is
also useful for damage handling of regular write operations. Update
the deferred I/O code to use the new function.
Don't clip the damage rectangle against the viewport. This only
works if the viewport is located at the beginning of the video
memory and the video memory doesn't extend the screen (i.e., if
there's no overallocation).
Fbdev emulation transfers data from write operations into a
possible shadow buffer, then into a GEM buffer object, and finally
via graphics driver onto the screen.
If callers write outside the currently visible area, clipping the
damage rectangle against the viewport will loose these updates in
the shadow buffer and the fbdev's buffer object will contain stale
data. Panning the viewport to the stale area of the buffer will
display obsolete data.
Instead, mark all written areas as damaged, so that the damage
handler updates the buffer object from the shadow buffer for all
such areas. The graphics driver's later has the option of clipping
the damaged area against the viewport when updating the screen
from the buffer object.
Computing the clip rectangle is prone to off-by-one errors when writes
happen near the end of a memory page. Point the end of the memory area
to the first trailing byte, so that (end - start) returns the area's
length.
This functions needs to be split into 2 parts where
one is called only once for locking single instance of
reset_domain's sem and reset flag and the other part
which handles MP1 states should still be called for
each device in XGMI hive.
We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
The reset domain contains register access semaphor
now and so needs to be present as long as each device
in a hive needs it and so it cannot be binded to XGMI
hive life cycle.
Adress this by making reset domain refcounted and pointed
by each member of the hive and the hive itself.
v4:
Fix crash on boot witrh XGMI hive by adding type to reset_domain.
XGMI will only create a new reset_domain if prevoius was of single
device type meaning it's first boot. Otherwsie it will take a
refocunt to exsiting reset_domain from the amdgou device.
Add a wrapper around reset_domain->refcount get/put
and a wrapper around send to reset wq (Lijo)
drm/amd/virt: For SRIOV send GPU reset directly to TDR queue.
No need to to trigger another work queue inside the work queue.
v3:
Problem:
Extra reset caused by host side FLR notification
following guest side triggered reset.
Fix: Preven qeuing flr_work from mailbox irq if guest
already executing a reset.
Suggested-by: Liu Shaoyun <Shaoyun.Liu@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Liu Shaoyun <Shaoyun.Liu@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74114.html
drm/amdgpu: Serialize non TDR gpu recovery with TDRs
Use reset domain wq also for non TDR gpu recovery trigers
such as sysfs and RAS. We must serialize all possible
GPU recoveries to gurantee no concurrency there.
For TDR call the original recovery function directly since
it's already executed from within the wq. For others just
use a wrapper to qeueue work and wait on it to finish.
drm/amdgpu: Move scheduler init to after XGMI is ready
Before we initialize schedulers we must know which reset
domain are we in - for single device there iis a single
domain per device and so single wq per device. For XGMI
the reset domain spans the entire XGMI hive and so the
reset wq is per hive.
Defined a reset_domain struct such that
all the entities that go through reset
together will be serialized one against
another. Do it for both single device and
XGMI hive cases.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by: Christian König <ckoenig.leichtzumerken@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74111.html
Lyude Paul [Fri, 4 Feb 2022 19:33:19 +0000 (14:33 -0500)]
drm/nouveau/backlight: Just set all backlight types as RAW
Currently we can get a warning on systems with eDP backlights like so:
nv_backlight: invalid backlight type
WARNING: CPU: 4 PID: 454 at drivers/video/backlight/backlight.c:420
backlight_device_register+0x226/0x250
This happens as a result of us not filling out props.type for the eDP
backlight, even though we do it for all other backlight types.
Since nothing in our driver uses anything but BACKLIGHT_RAW, let's take the
props\.type assignments out of the codepaths for individual backlight types
and just set it unconditionally to prevent this from happening again.
Lyude Paul [Fri, 4 Feb 2022 18:05:04 +0000 (13:05 -0500)]
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops
It seems that some laptops will report having both an eDP and LVDS
connector, even though only the LVDS connector is actually hooked up. This
can lead to issues with backlight registration if the eDP connector ends up
getting registered before the LVDS connector, as the backlight device will
then be registered to the eDP connector instead of the LVDS connector.
So, fix this by only registering the backlight on connectors that are
reported as being connected.
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
Bugzilla: https://gitlab.freedesktop.org/drm/nouveau/-/issues/137 Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204180504.328999-1-lyude@redhat.com
nouveau/svm: Use struct_size() helper in nouveau_pfns_map()
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
drm/ast: Move SIL164-based connector code into separate helpers
Add helpers for initializing SIL164-based connectors. These used to be
handled by the VGA connector code. But SIL164 provides output via DVI-I,
so set the encoder and connector types accordingly.
If a SIL164 chip has been detected, ast will now create a DVI-I
connector instead of a VGA connector.
drm/ast: Move DP501-based connector code into separate helpers
Add helpers for DP501-based connectors. DP501 provides output via
DisplayPort. This used to be handled by the VGA connector code.
If a DP501 chip has been detected, ast will now create a DisplayPort
connector instead of a VGA connector.
Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also
remove the call to drm_connector_update_edid_property(), which is
performed by drm_get_edid().
drm/ast: Initialize encoder and connector for VGA in helper function
Move encoder and connector initialization into a single helper and
put all related mode-setting structures into a single place. Done in
preparation of moving transmitter code into separate helpers. No
functional changes.
v2:
* move encoder CRTC bitmask fix into separate patch (Javier)
drm/ast: Move connector mode_valid function to CRTC
The tests in ast_mode_valid() verify the correct resolution for the
supplied mode. This is a limitation of the CRTC, so move the function
to the CRTC helpers. No functional changes.
Update the connector code to fail if the connector could not be
initialized. The current code just ignored the error and failed
later when the connector was supposed to be used.
Lucas De Marchi [Wed, 26 Jan 2022 09:39:49 +0000 (01:39 -0800)]
drm: Convert open-coded yes/no strings to yesno()
linux/string_helpers.h provides a helper to return "yes"/"no" strings.
Replace the open coded versions with str_yes_no(). The places were
identified with the following semantic patch:
@@
expression b;
@@
- b ? "yes" : "no"
+ str_yes_no(b)
Then the includes were added, so we include-what-we-use, and parenthesis
adjusted in drivers/gpu/drm/v3d/v3d_debugfs.c. After the conversion we
still see the same binary sizes:
projects / thirdparty / linux.git / log
