free cmd id is read using virtio endian, spec says all fields
in balloon are LE. Fix it up.
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID
because of which when card is inserted, usb otg is enumerated
and the card is never detected.
[ 64.492645] cfg80211: failed to load regulatory.db
[ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
[ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 76.412763] usb usb2: Product: EHCI Host Controller
[ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd
[ 76.424623] usb usb2: SerialNumber: ci_hdrc.0
[ 76.431755] hub 2-0:1.0: USB hub found
[ 76.435862] hub 2-0:1.0: 1 port detected
The TRM mentions GPIO_1 pad should be muxed/assigned for card detect
and ENET_RX_ER pad for USB_OTG_ID for proper operation.
This patch fixes pin muxing as per TRM and is tested on a
i.Core 1.5 MX6 DL SOM.
[ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable
[ 22.459992] mmc0: new high speed SDHC card at address 0001
[ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 22.478856] mmcblk0: p1 p2
__vdso_*() should be removed and fallback used if CNTCVT is not
available by cntvct_functional(). __vdso_clock_gettime64 when added
previous commit is using the incorrect CNTCVT value in that state.
__vdso_clock_gettime64 is also added to remove it's symbol.
Cc: stable@vger.kernel.org Fixes: 74d06efb9c2f ("ARM: 8932/1: Add clock_gettime64 entry point") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Tested-by: Robin Murphy <robin.mruphy@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. LDRT) in kernel mode can cause user watchpoints to fire
unexpectedly. In such cases, the hw_breakpoint logic will invoke the user
overflow handler which will typically raise a SIGTRAP back to the current
task. This is futile when returning back to the kernel because (a) the
signal won't have been delivered and (b) userspace can't handle the thing
anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
Cc: <stable@vger.kernel.org> Fixes: f81ef4a920c8 ("ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework") Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unfortunately the commit listed in the subject line above failed
to ensure that the task's audit_context was properly initialized/set
before enabling the "accompanying records". Depending on the
situation, the resulting audit_context could have invalid values in
some of it's fields which could cause a kernel panic/oops when the
task/syscall exists and the audit records are generated.
We will revisit the original patch, with the necessary fixes, in a
future kernel but right now we just want to fix the kernel panic
with the least amount of added risk.
Cc: stable@vger.kernel.org Fixes: 1320a4052ea1 ("audit: trigger accompanying records when no rules present") Reported-by: j2468h@googlemail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vhost/scsi doesn't handle type conversion correctly
for request type when using virtio 1.0 and up for BE,
or cross-endian platforms.
Fix it up using vhost_32_to_cpu.
Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
destroy_prefetch_work() must always be called if the work is not going
to be queued. The num_sge also should have been set to i, not i-1
which avoids the condition where it shouldn't have been called in the
first place.
Cc: stable@vger.kernel.org Fixes: fb985e278a30 ("RDMA/mlx5: Use SRCU properly in ODP prefetch") Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's been reported that, when neither nouveau nor Nvidia graphics
driver is used, the screen starts flickering. And, after comparing
between the working case (stable 4.4.x) and the broken case, it turned
out that the problem comes from the audio component binding. The
Nvidia and AMD audio binding code clears the bus->keep_power flag
whenever snd_hdac_acomp_init() succeeds. But this doesn't mean that
the component is actually bound, but it merely indicates that it's
ready for binding. So, when both nouveau and Nvidia are blacklisted
or not ready, the driver keeps running without the audio component but
also with bus->keep_power = false. This made the driver runtime PM
kicked in and powering down when unused, which results in flickering
in the graphics side, as it seems.
For fixing the bug, this patch moves the bus->keep_power flag change
into generic_acomp_notifier_set() that is the function called from the
master_bind callback of component ops; i.e. it's guaranteed that the
binding succeeded.
We've received a regression report on Intel HD-audio controller that
wakes up immediately after S3 suspend. The bisection leads to the
commit c4c8dd6ef807 ("ALSA: hda: Skip controller resume if not
needed"). This commit replaces the system-suspend to use
pm_runtime_force_suspend() instead of the direct call of
__azx_runtime_suspend(). However, by some really mysterious reason,
pm_runtime_force_suspend() causes a spurious wakeup (although it calls
the same __azx_runtime_suspend() internally).
As an ugly workaround for now, revert the behavior to call
__azx_runtime_suspend() and __azx_runtime_resume() for those old Intel
platforms that may exhibit such a problem, while keeping the new
standard pm_runtime_force_suspend() and pm_runtime_force_resume()
pair for the remaining chips.
HP NB right speaker had no sound output.
This platform was connected to I2S Amp for speaker out.(None Realtek I2S Amp IC)
EC need to check codec GPIO1 pin to initial I2S Amp.
This patch adds support for headset mic to the ASUS ROG Zephyrus
G15(GA502) notebook series by adding the corresponding
vendor/pci_device id, as well as adding a new fixup for the used
realtek ALC289. The fixup stets the correct pin to get the headset mic
correctly recognized on audio-jack.
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X
bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device
doesn't seem to function properly with ASPM enabled. On an Asus PRIME
H270-PRO motherboard, it causes errors like these:
In addition to flooding the kernel log, this also causes the machine to
wake up immediately after suspend is initiated.
The device advertises ASPM L0s and L1 support in the Link Capabilities
register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM
support".
Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe
errors.
When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
echo "Checking regmap in $i";
cat $i/registers;
done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
The double poll additions were centered around doing POLL_ADD on file
descriptors that use more than one waitqueue (typically one for read,
one for write) when being polled. However, it can also end up being
triggered for when we use poll triggered retry. For that case, we cannot
safely use req->io, as that could be used by the request type itself.
Add a second io_poll_iocb pointer in the structure we allocate for poll
based retry, and ensure we use the right one from the two paths.
Commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages")
eliminated sending of the 'gap' indicator in regular ACK messages and
only allowed to build NACK message with enabled probe/probe_reply.
However, necessary correction for building NACK message was missed
in tipc_link_timeout() function. This leads to significant delay and
link reset (due to retransmission failure) in lossy environment.
This commit fixes it by setting the 'probe' flag to 'true' when
the receive deferred queue is not empty. As a result, NACK message
will be built to send back to another peer.
Fixes: 02288248b051 ("tipc: eliminate gap indicator from ACK messages") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.
Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load
balancing.
The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result
---------------------------------------------
0 | no | 20% | 40%
1 | no | 20% | 20%
2 | yes | 20% | 0%
3 | no | 20% | 40%
4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still
works better than now.
Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.
However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.
Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.
Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When vlan_newlink call register_vlan_dev fails, it might return error
with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should
free the memory. But currently rtnl_newlink only free the memory which
state is NETREG_UNINITIALIZED.
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.
Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fragment packets do defrag in tcf_ct_handle_fragments
will clear the skb->cb which make the qdisc_skb_cb clear
too. So the qdsic_skb_cb should be store before defrag and
restore after that.
It also update the pkt_len after all the
fragments finish the defrag to one packet and make the
following actions counter correct.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.
Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Reviewed-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix allows ath9k_htc modules to connect to WLAN once again.
Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
When SOF is used, the normal links are converted into DPCM ones. This
generates an error
[ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd
Wake on Voice does not support playback
[ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on
Voice :-22
When errors happens while loading graph components, the kernel oopses
while trying to remove all topology components. This can be
root-caused to a list pointing to memory that was already freed on
error.
remove_route() is already called on errors and will perform the
required cleanups so there's no need to free the route memory in
soc_tplg_dapm_graph_elems_load() if the route was added to the
list. We do however want to free the routes allocated but not added to
the list.
Fixes: 7df04ea7a31ea ('ASoC: topology: modify dapm route loading routine and add dapm route unloading') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building on allyesconfig kernel for a NO_DMA=y platform (e.g.
Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n,
leading to a link failure:
sound/soc/qcom/common.o: In function `qcom_snd_parse_of':
common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port'
While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845
don't, so the following warning is seen:
Until recently, this warning was harmless (from a compile-testing
point-of-view), but the new user of q6afe_is_rx_port() turned this into
a hard failure.
As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on
QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is
safe to increase compile testing coverage. Hence fix the link failure
by dropping the HAS_DMA dependency of SND_SOC_QDSP6.
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).
Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.
Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.
As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.
This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.
Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.
Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.
Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0 4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384> 4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calculating the clock divider, start dividing at 2 instead of 1.
The divider is divided by two at the end of the calculation, so starting
at 1 may result in a divider of 0, which shouldn't happen.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200709195706.12741-3-eajames@linux.ibm.com Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
khugepaged has to drop mmap lock several times while collapsing a page.
The situation can change while the lock is dropped and we need to
re-validate that the VMA is still in place and the PMD is still subject
for collapse.
But we miss one corner case: while collapsing an anonymous pages the VMA
could be replaced with file VMA. If the file VMA doesn't have any
private pages we get NULL pointer dereference:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
anon_vma_lock_write include/linux/rmap.h:120 [inline]
collapse_huge_page mm/khugepaged.c:1110 [inline]
khugepaged_scan_pmd mm/khugepaged.c:1349 [inline]
khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline]
khugepaged_do_scan mm/khugepaged.c:2193 [inline]
khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238
The fix is to make sure that the VMA is anonymous in
hugepage_vma_revalidate(). The helper is only used for collapsing
anonymous pages.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hugetlb_cma[0] can be NULL due to various reasons, for example, node0
has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is
not enabled. gigantic pages might have been reserved on other nodes.
This patch fixes possible double reservation and CMA leak.
[akpm@linux-foundation.org: fix CONFIG_CMA=n warning]
[sfr@canb.auug.org.au: better checks before using hugetlb_cma] Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the kmem_cache refcount is greater than one, we should not mark the
root kmem_cache as dying. If we mark the root kmem_cache dying
incorrectly, the non-root kmem_cache can never be destroyed. It
resulted in memory leak when memcg was destroyed. We can use the
following steps to reproduce.
1) Use kmem_cache_create() to create a new kmem_cache named A.
2) Coincidentally, the kmem_cache A is an alias for kmem_cache B,
so the refcount of B is just increased.
3) Use kmem_cache_destroy() to destroy the kmem_cache A, just
decrease the B's refcount but mark the B as dying.
4) Create a new memory cgroup and alloc memory from the kmem_cache
B. It leads to create a non-root kmem_cache for allocating memory.
5) When destroy the memory cgroup created in the step 4), the
non-root kmem_cache can never be destroyed.
If we repeat steps 4) and 5), this will cause a lot of memory leak. So
only when refcount reach zero, we mark the root kmem_cache as dying.
Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of
kmalloc"), simple xattr entry is allocated with kvmalloc() instead of
kmalloc(), so we should release it with kvfree() instead of kfree().
Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Daniel Xu <dxu@dxuuu.xyz> Cc: Chris Down <chris@chrisdown.name> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under
mmap_read_lock(). It can lead to race with __do_munmap():
Thread A Thread B
__do_munmap()
detach_vmas_to_be_unmapped()
mmap_write_downgrade()
expand_downwards()
vma->vm_start = address;
// The VMA now overlaps with
// VMAs detached by the Thread A
// page fault populates expanded part
// of the VMA
unmap_region()
// Zaps pagetables partly
// populated by Thread B
Similar race exists for expand_upwards().
The fix is to avoid downgrading mmap_lock in __do_munmap() if detached
VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA.
[akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment]
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.20+] Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
syzbot is reporting general protection fault in do_con_write() [1] caused
by vc->vc_screenbuf == ZERO_SIZE_PTR caused by vc->vc_screenbuf_size == 0
caused by vc->vc_cols == vc->vc_rows == vc->vc_size_row == 0 caused by
fb_set_var() from ioctl(FBIOPUT_VSCREENINFO) on /dev/fb0 , for
gotoxy(vc, 0, 0) from reset_terminal() from vc_init() from vc_allocate()
from con_install() from tty_init_dev() from tty_open() on such console
causes vc->vc_pos == 0x10000000e due to
((unsigned long) ZERO_SIZE_PTR) + -1U * 0 + (-1U << 1).
I don't think that a console with 0 column or 0 row makes sense. And it
seems that vc_do_resize() does not intend to allow resizing a console to
0 column or 0 row due to
Theoretically, cols and rows can be any range as long as
0 < cols * rows * 2 <= KMALLOC_MAX_SIZE is satisfied (e.g.
cols == 1048576 && rows == 2 is possible) because of
in visual_init() and kzalloc(vc->vc_screenbuf_size) in vc_allocate().
Since we can detect cols == 0 or rows == 0 via screenbuf_size = 0 in
visual_init(), we can reject kzalloc(0). Then, vc_allocate() will return
an error, and con_write() will not be called on a console with 0 column
or 0 row.
We need to make sure that integer overflow in visual_init() won't happen.
Since vc_do_resize() restricts cols <= 32767 and rows <= 32767, applying
1 <= cols <= 32767 and 1 <= rows <= 32767 restrictions to vc_allocate()
will be practically fine.
This patch does not touch con_init(), for returning -EINVAL there
does not help when we are not returning -ENOMEM.
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
WRITE_ONCE() isn't the correct way to publish a pointer to a data
structure, since it doesn't include a write memory barrier. Therefore
other tasks may see that the pointer has been set but not see that the
pointed-to memory has finished being initialized yet. Instead a
primitive with "release" semantics is needed.
Use smp_store_release() for this.
The use of READ_ONCE() on the read side is still potentially correct if
there's no control dependency, i.e. if all memory being "published" is
transitively reachable via the pointer itself. But this pairing is
somewhat confusing and error-prone. So just upgrade the read side to
smp_load_acquire() so that it clearly pairs with smp_store_release().
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable <stable@vger.kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200716060553.24618-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.
Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.
A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.
SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.
Commit 33ae787b74fc ("serial: tegra: add support to ignore read") added
support for dropping input in case CREAD isn't set, but for PIO the
ignore_status_mask wasn't checked until after the character had been
put in the receive buffer.
Note that the NULL tty-port test is bogus and will be removed by a
follow-on patch.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problems started with the revert (18cc7ac8a28e28). The
cdns_uart_console.index is statically assigned -1. When the port is
registered, Linux assigns consecutive numbers to it. It turned out that
when using ttyPS1 as console, the index is not updated as we are reusing
the same cdns_uart_console instance for multiple ports. When registering
ttyPS0, it gets updated from -1 to 0, but when registering ttyPS1, it
already is 0 and not updated.
That led to 2ae11c46d5fdc4. It assigns the index prior to registering
the uart_driver once. Unfortunately, that ended up breaking the
situation where the probe order does not match the id order. When using
the same device tree for both uboot and linux, it is important that the
serial0 alias points to the console. So some boards reverse those
aliases. This was reported by Jan Kiszka. The proposed fix was reverting
the index assignment and going back to the previous iteration.
However such a reversed assignement (serial0 -> uart1, serial1 -> uart0)
was already partially broken by the revert (18cc7ac8a28e28). While the
ttyPS device works, the kmsg connection is already broken and kernel
messages go missing. Reverting the id assignment does not fix this.
>From the xilinx_uartps driver pov (after reverting the refactoring
commits), there can be only one console. This manifests in static
variables console_pprt and cdns_uart_console. These variables are not
properly linked and can go out of sync. The cdns_uart_console.index is
important for uart_add_one_port. We call that function for each port -
one of which hopefully is the console. If it isn't, the CON_ENABLED flag
is not set and console_port is cleared. The next cdns_uart_probe call
then tries to register the next port using that same cdns_uart_console.
It is important that console_port and cdns_uart_console (and its index
in particular) stay in sync. The index assignment implemented by
Shubhrajyoti Datta is correct in principle. It just may have to happen a
second time if the first cdns_uart_probe call didn't encounter the
console device. And we shouldn't change the index once the console uart
is registered.
Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Link: https://lore.kernel.org/linux-serial/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com/ Fixes: 18cc7ac8a28e28 ("Revert "serial: uartps: Register own uart console and driver structures"") Fixes: 2ae11c46d5fdc4 ("tty: xilinx_uartps: Fix missing id assignment to the console") Fixes: 76ed2e10579671 ("Revert "tty: xilinx_uartps: Fix missing id assignment to the console"") Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200713073227.GA3805@laureti-dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under
some circumstances, so don't call it under RCU. There doesn't appear
to be a need for RCU protection around this particular call.
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Patrick Fernie <patrick.fernie@gmail.com> CC: Stable <stable@vger.kernel.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Commit 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org Fixes: 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.
syzbot is reporting that mmput() from shrinker function has a risk of
deadlock [1], for delayed_uprobe_add() from update_ref_ctr() calls
kzalloc(GFP_KERNEL) with delayed_uprobe_lock held, and
uprobe_clear_state() from __mmput() also holds delayed_uprobe_lock.
Commit a1b2289cef92ef0e ("android: binder: drop lru lock in isolate
callback") replaced mmput() with mmput_async() in order to avoid sleeping
with spinlock held. But this patch replaces mmput() with mmput_async() in
order not to start __mmput() from shrinker context.
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.
To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.
Although mmiowb() is concerned only with serialising MMIO writes occuring
in contexts where a spinlock is held, the call to mmiowb_set_pending()
from the MMIO write accessors can occur in preemptible contexts, such
as during driver probe() functions where ordering between CPUs is not
usually a concern, assuming that the task migration path provides the
necessary ordering guarantees.
Unfortunately, the default implementation of mmiowb_set_pending() is not
preempt-safe, as it makes use of a a per-cpu variable to track its
internal state. This has been reported to generate the following splat
on riscv:
Although it's possible to fix the driver in this case, other splats have
been seen from other drivers, including the infamous 8250 UART, and so
it's better to address this problem in the mmiowb core itself.
Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb
state and then only updating the 'mmiowb_pending' field if we are not
preemptible (i.e. we have a non-zero nesting count).
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Guo Ren <guoren@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Palmer Dabbelt <palmer@dabbelt.com> Reported-by: Emil Renner Berthing <kernel@esmil.dk> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To solve the above issue, current module should be registered to kernel,
so that try_module_get() can be invoked when perf sampling starts. This
adds the reference counting of module and could prevent users from removing
modules during sampling.
Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Dietrich reports invalid temperature source messages on Asus Formula
XII Z490.
nct6775 nct6775.656: Invalid temperature source 28 at index 0,
source register 0x100, temp register 0x73
Debugging suggests that temperature source 28 reports the CPU temperature.
Let's assume that temperature sources 28 and 29 reflect "PECI Agent {0,1}
Calibration", similar to other chips of the series.
Reported-by: Stefan Dietrich <roots@gmx.de> Cc: Stefan Dietrich <roots@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
During preemption test for gfx10, it uses kiq to trigger
gfx preemption, which would result in race condition
with flushing TLB for kiq.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Issue:
When PEC is enabled, binding adm1272 to the adm1275 would
fail due to PEC error. See below:
adm1275: probe of xxxx failed with error -74
Diagnosis:
Per the datasheet of adm1272, adm1278, adm1293 and amd1294,
PMON_CONFIG (0xd4) is 16bits wide. On the other hand,
PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not
assume everything is 8bits wide and read only 8bits from it.
Solution:
If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word.
Else, use i2c_read_byte
Testing:
Binding adm1272 to the driver.
The change is only tested on adm1272.
projects / thirdparty / kernel / stable.git / log
