readahead: be more verbose about creation failures
systemd-readahead reports "Failed to create shared memory segment:
No such file or directory", but it's unclear how it can happen. Be
more verbose about failures.
systemd: fall back to mounting /sys/fs/cgroup sans xattr
xattrs on cgroup fs were added back in v3.6-rc3-3-g03b1cde. But we
support kernels >= 2.6.39, and we should also support kernels compiled
w/o xattr support, even if systemd is compiled with xattr support.
Fall back to mounting without xattr support.
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
cgroup: make sure all our cgroup objects have a suffix and are properly escaped
Session objects will now get the .session suffix, user objects the .user
suffix, nspawn containers the .nspawn suffix.
This also changes the user cgroups to be named after the numeric UID
rather than the username, since this allows us the parse these paths
standalone without requiring access to the cgroup file system.
This also changes the mapping of instanced units to cgroups. Instead of
mapping foo@bar.service to the cgroup path /user/foo@.service/bar we
will now map it to /user/foo@.service/foo@bar.service, in order to
ensure that all our objects are properly suffixed in the tree.
As discussed with Dan Berrange it's a good idea to suffix all objects in
the cgroup tree with ".something", so that when the system is
partitioned using a resource management tool we can drop objects of
different types into the same partition directory without generate
namespace conflicts.
We'l add this to the Pax Control Group document as soon as write access
to the fdo wiki is restored.
systemd,nspawn: use extended attributes to store metadata
All attributes are stored as text, since root_directory is already
text, and it seems easier to have all of them in text format.
Attributes are written in the trusted. namespace, because the kernel
currently does not allow user. attributes on cgroups. This is a PITA,
and CAP_SYS_ADMIN is required to *read* the attributes. Alas.
A second pipe is opened for the child to signal the parent that the
cgroup hierarchy has been set up.
Because statfs.t_type can be int on some architecures, we have to cast
the const magic to the type, otherwise the compiler warns about
signed/unsigned comparison, because the magic can be 32 bit unsigned.
statfs(2) man page is also wrong on some systems, because
f_type is not __SWORD_TYPE on some architecures.
The following program:
int main(int argc, char**argv)
{
struct statfs s;
statfs(argv[1], &s);
nspawn: create empty /etc/resolv.conf if necessary
nspawn will overmount resolv.conf if it exists. Since e.g.
default install with yum doesn't create /etc/resolv.conf,
a container created with yum will not have network. This
seems undesirable, and since we overmount the file anyway,
let's create it too.
Also, mounting a read-write /etc/resolv.conf in the container
is treated as a failure, since it makes it possible to
modify hosts /etc/resolv.conf from inside the container.
systemd-logind: Fix linking by reordering libraries in LDADD
libsystemd-audit needs functions from libsystemd-shared, so
libsystemd-audit needs to appear first. Otherwise:
CCLD systemd-logind
./.libs/libsystemd-audit.a(audit.o): In function `audit_session_from_pid':
/home/josh/src/systemd/src/shared/audit.c:50: undefined reference to `detect_container'
buildsys: Add --disable-tests to avoid building tests
This patch adds --disable-tests to configure. It is based on a patch
posted by Thierry Reding in 2010. The motivation for adding it is that
some tests fail link-time when cross-compiling.
The patch adds a new Makefile variable -- manual_tests -- and uses
that instead of noinst_PROGRAMS. However, if ENABLE_TESTS is true,
the former is added to the latter. It also renames noinst_tests to
simply tests.
Harald Hoyer [Thu, 18 Apr 2013 08:15:25 +0000 (10:15 +0200)]
fileio.c: do not parse comments after non-whitespace chars
systemd does not want to understand comments after the first
non-whitespace char occured.
key=foo #comment will result into key == "foo #comment"
key="foo" #comment will result into key == "foo#comment"
"key= #comment" will result into key == "#comment"
"key #comment" is an invalid line
Harald Hoyer [Thu, 18 Apr 2013 05:34:25 +0000 (07:34 +0200)]
Add ugly CMP_F_TYPE() macro
On some architectures (like s390x) the kernel has the type int for
f_type, but long in userspace.
Assigning the 32 bit magic constants from linux/magic.h to the 31 bit
signed f_type in the kernel, causes f_type to be negative for some
constants.
glibc extends the int to long for those architecures in 64 bit mode, so
the negative int becomes a negative long, which cannot be simply
compared to the original magic constant, because the compiler would
automatically cast the constant to long.
To workaround this issue, we also compare to the (int)MAGIC value in a
macro. Of course, we could do #ifdef with the architecure, but it has to
be maintained, and the magic constants are 32 bit anyway.
Someday, when the int is unsigned or long for all architectures, we can
remove this macro again. Until then, keep it as simple as it can be.
bus: replace aligned_alloc() with memalign() everywhere
aligned_alloc() is C11 and not available everywhere. Also it would
require us to align the size value. So let's just invoke memalign()
instead, which is universally available and doesn't have any alignment
restrictions on the size parameter.
ExecContext isn't used in this header file, and everything seems to
build just fine without this typedef. The typedef doesn't really belong
here, and at least my gcc-4.4.6 gives an error on type redefined.
Harald Hoyer [Thu, 11 Apr 2013 13:27:55 +0000 (15:27 +0200)]
journal: add one more level on top with AND
When using "-p" and "-b" in combination with "-u", the output is not
what you would expect. The reason is the sd_journal_add_disjunction()
call in add_matches_for_unit() and add_matches_for_user_unit(), which
adds two ORs without taking the other conditions to every OR.
Adding another level on top with AND and sd_journal_add_conjunction()
solves the problem.
-- Reboot --
[ 3.216305] lenovo systemd[1]: Starting OpenSSH server daemon...
-- Reboot --
[ 3.168666] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 3.169639] lenovo systemd[1]: Started OpenSSH server daemon.
[36285.635389] lenovo systemd[1]: Stopped OpenSSH server daemon.
-- Reboot --
[ 10.838657] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 10.913698] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6881.035183] lenovo systemd[1]: Stopped OpenSSH server daemon.
-- Reboot --
[ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22.
[ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
As we see, the output is from _every_ boot and priority 0 is not taken
into account.
Output after patch:
$ journalctl -o short-monotonic -ab -p 0 -u sshd.service
-- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:58:21 CET. --
Increasing the priority:
$ journalctl -o short-monotonic -ab -p 6 -u sshd.service
-- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:59:12 CET. --
[ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon...
[ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon.
[ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22.
[ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
Martin Jansa [Tue, 16 Apr 2013 12:26:30 +0000 (14:26 +0200)]
configure: use AC_CHECK_TOOL for objcopy, strings and gperf
* using AC_PATH_TOOL does not allow to override it from shell environment
which is useful when cross-compiling
* with external toolchain I have different HOST_PREFIX and HOST_SYS
AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy
which is available only as ${TARGET_PREFIX}-objcopy then it tries
objcopy without prefix which is found on host, but that objcopy
does not work for !host (e.g. arm when building on x86) libs
journalctl: show fields requested with --field in full
I see little point in silently truncating fields when
they are explictly requested. With this change e.g.
journalctl -b MESSAGE_ID=9f26aa562cf440c2b16c773d0479b518 --field=BOOTCHART
works as expected.
Apparently nsenter doesn't handle options concatenated together.
I'm pretty sure it worked at one point, but it seems like magic,
since each of those options can take arguments.