Junio C Hamano [Mon, 25 Feb 2013 16:04:03 +0000 (08:04 -0800)]
Merge branch 'bw/get-tz-offset-perl' into maint
* bw/get-tz-offset-perl:
cvsimport: format commit timestamp ourselves without using strftime
perl/Git.pm: fix get_tz_offset to properly handle DST boundary cases
Move Git::SVN::get_tz to Git::get_tz_offset
Junio C Hamano [Wed, 20 Feb 2013 05:54:15 +0000 (21:54 -0800)]
Merge branch 'ob/imap-send-ssl-verify' into maint
* ob/imap-send-ssl-verify:
imap-send: support subjectAltName as well
imap-send: the subject of SSL certificate must match the host
imap-send: move #ifdef around
Check not only the common name of the certificate subject, but also
check the subject alternative DNS names as well, when verifying that
the certificate matches that of the host we are trying to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: the subject of SSL certificate must match the host
We did not check a valid certificate's subject at all, and would
have happily talked with a wrong host after connecting to an
incorrect address and getting a valid certificate that does not
belong to the host we intended to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 15 Feb 2013 20:32:19 +0000 (12:32 -0800)]
imap-send: move #ifdef around
Instead of adding an early return to the inside of the
ssl_socket_connect() function for NO_OPENSSL compilation, split it
into a separate stub function.
No functional change, but the next change to extend ssl_socket_connect()
will become easier to read this way.
W. Trevor King [Mon, 18 Feb 2013 00:15:58 +0000 (19:15 -0500)]
user-manual: use 'git config --global user.*' for setup
A simple command line call is easier than spawning an editor,
especially for folks new to ideas like the "command line" and "text
editors". This is also the approach suggested by 'git commit' if you
try and commit without having configured user.name or user.email.
Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Tue, 12 Feb 2013 09:24:44 +0000 (10:24 +0100)]
Replace filepattern with pathspec for consistency
pathspec is the most widely used term, and is the one defined in
gitglossary.txt. <filepattern> was used only in the synopsys for git-add
and git-commit, and in git-add.txt. Get rid of it.
Jiang Xin [Sat, 9 Feb 2013 06:31:09 +0000 (14:31 +0800)]
Add utf8_fprintf helper that returns correct number of columns
Since command usages can be translated, they may include utf-8
encoded strings, and the output in console may not align well any
more. This is because strlen() is different from strwidth() on utf-8
strings.
A wrapper utf8_fprintf() can help to return the correct number of
columns required.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Mon, 11 Feb 2013 08:35:04 +0000 (09:35 +0100)]
git-bisect.txt: clarify that reset quits bisect
"reset" can be easily misunderstood as resetting a bisect session to its
start without finishing it. Clarify that it actually quits the bisect
session.
Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Walton [Sat, 9 Feb 2013 21:46:58 +0000 (21:46 +0000)]
cvsimport: format commit timestamp ourselves without using strftime
Some implementations of strftime(3) lack support for "%z". Also
there is no need for %s in git-cvsimport as the supplied time is
already in seconds since the epoch.
For %z, use the function get_tz_offset provided by Git.pm instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Walton [Sat, 9 Feb 2013 21:46:57 +0000 (21:46 +0000)]
perl/Git.pm: fix get_tz_offset to properly handle DST boundary cases
When passed a local time that was on the boundary of a DST change,
get_tz_offset returned a GMT offset that was incorrect (off by one
hour). This is because the time was converted to GMT and then back to
a time stamp via timelocal() which cannot disambiguate boundary cases
as noted in its documentation.
Modify this algorithm, using an approach suggested in
to first convert the timestamp in question to two broken down forms
with localtime() and gmtime(), and then compute what timestamps
these two broken down forms would represent in GMT (i.e. a timezone
that does not have DST issues) by applying timegm() on them. The
difference between the resulting timestamps is the timezone offset.
This avoids the ambigious conversion and allows a correct time to be
returned on every occassion.
Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Walton [Sat, 9 Feb 2013 21:46:56 +0000 (21:46 +0000)]
Move Git::SVN::get_tz to Git::get_tz_offset
This function has utility outside of the SVN module for any routine
that needs the equivalent of GNU strftime's %z formatting option.
Move it to the top-level Git.pm so that non-SVN modules don't need to
import the SVN module to use it.
The rename makes the purpose of the function clearer.
Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asheesh Laroia [Fri, 8 Feb 2013 01:16:24 +0000 (17:16 -0800)]
git-mergetool: print filename when it contains %
If git-mergetool was invoked with files with a percent sign (%) in
their names, it would print an error. For example, if you were
calling mergetool on a file called "%2F":
printf: %2F: invalid directive
Do not pass random string to printf as if it were a valid format.
Use format string "%s" and pass the string as data to be formatted
instead.
Signed-off-by: Asheesh Laroia <asheesh@asheesh.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Feb 2013 23:14:22 +0000 (15:14 -0800)]
Merge branch 'jc/fake-ancestor-with-non-blobs' into maint
Rebasing the history of superproject with change in the submodule
has been broken since v1.7.12.
* jc/fake-ancestor-with-non-blobs:
apply: diagnose incomplete submodule object name better
apply: simplify build_fake_ancestor()
git-am: record full index line in the patch used while rebasing
Jeff King [Wed, 6 Feb 2013 10:39:52 +0000 (05:39 -0500)]
http_request: reset "type" strbuf before adding
Callers may pass us a strbuf which we use to record the
content-type of the response. However, we simply appended to
it rather than overwriting its contents, meaning that cruft
in the strbuf gave us a bogus type. E.g., the multiple
requests triggered by http_request could yield a type like
"text/plainapplication/x-git-receive-pack-advertisement".
Reported-by: Michael Schubert <mschub@elegosoft.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn Pearce [Thu, 31 Jan 2013 21:02:07 +0000 (13:02 -0800)]
Verify Content-Type from smart HTTP servers
Before parsing a suspected smart-HTTP response verify the returned
Content-Type matches the standard. This protects a client from
attempting to process a payload that smells like a smart-HTTP
server response.
JGit has been doing this check on all responses since the dawn of
time. I mistakenly failed to include it in git-core when smart HTTP
was introduced. At the time I didn't know how to get the Content-Type
from libcurl. I punted, meant to circle back and fix this, and just
plain forgot about it.
Signed-off-by: Shawn Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 4 Feb 2013 18:03:41 +0000 (10:03 -0800)]
Merge branch 'jc/merge-blobs' into maint
* jc/merge-blobs:
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
John Keeping [Sun, 3 Feb 2013 14:37:11 +0000 (14:37 +0000)]
builtin/apply: tighten (dis)similarity index parsing
This was prompted by an incorrect warning issued by clang [1], and a
suggestion by Linus to restrict the range to check for values greater
than INT_MAX since these will give bogus output after casting to int.
In fact the (dis)similarity index is a percentage, so reject values
greater than 100.
Junio C Hamano [Sun, 3 Feb 2013 21:08:18 +0000 (13:08 -0800)]
combine-diff: lift 32-way limit of combined diff
The "raw" format of combine-diff output is supposed to have as many
colons as there are parents at the beginning, then blob modes for
these parents, and then object names for these parents.
We weren't however prepared to handle a more than 32-way merge and
did not show the correct number of colons in such a case.
Jonathan Nieder [Fri, 18 Nov 2011 23:23:24 +0000 (17:23 -0600)]
Makefile: explicitly set target name for autogenerated dependencies
"gcc -MF depfile -MMD -MP -c -o path/to/file.o" produces a makefile
snippet named "depfile" describing what files are needed to build the
target given by "-o". When ccache versions before v3.0pre0~187 (Fix
handling of the -MD and -MDD options, 2009-11-01) run, they execute
gcc -MF depfile -MMD -MP -E
instead to get the final content for hashing. Notice that the "-c -o"
combination is replaced by "-E". The result is a target name without
a leading path.
Thus when building git with such versions of ccache with
COMPUTE_HEADER_DEPENDENCIES enabled, the generated makefile snippets
define dependencies for the wrong target:
$ make builtin/add.o
GIT_VERSION = 1.7.8.rc3
* new build flags or prefix
CC builtin/add.o
$ head -1 builtin/.depend/add.o.d
add.o: builtin/add.c cache.h git-compat-util.h compat/bswap.h strbuf.h \
After a change in a header file, object files in a subdirectory are
not automatically rebuilt by "make":
$ touch cache.h
$ make builtin/add.o
$
Luckily we can prevent trouble by explicitly supplying the name of the
target to ccache and gcc, using the -MQ option. Do so.
Reported-and-tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reported-by: : 허종만 <jongman.heo@samsung.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Keeping [Thu, 31 Jan 2013 21:59:50 +0000 (21:59 +0000)]
Rename {git- => git}remote-helpers.txt
When looking up a topic via "git help <topic>", git-help prepends "git-"
to topics that are the names of commands (either builtin or found on the
path) and "git" (no hyphen) to any other topic name.
"git-remote-helpers" is not the name of a command, so "git help
remote-helpers" looks for "gitremote-helpers" and does not find it.
Fix this by renaming "git-remote-helpers.txt" to
"gitremote-helpers.txt".
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 1 Feb 2013 03:33:27 +0000 (19:33 -0800)]
apply: diagnose incomplete submodule object name better
"git am -3" uses this function to build a tree that records how the
preimage the patch was created from would have looked like. An
abbreviated object name on the index line is ordinarily sufficient
for us to figure out the object name the preimage tree would have
contained, but a change to a submodule by definition shows an object
name of a submodule commit which our repository should not have, and
get_sha1_blob() is not an appropriate way to read it (or get_sha1()
for that matter).
Use get_sha1_hex() and complain if we do not find a full object name
there.
We could read from the payload part of the patch to learn the full
object name of the commit, but the primary user "git rebase" has
been fixed to give us a full object name, so this should suffice
for now.
Junio C Hamano [Fri, 1 Feb 2013 03:19:44 +0000 (19:19 -0800)]
apply: simplify build_fake_ancestor()
The local variable sha1_ptr in the build_fake_ancestor() function
used to either point at the null_sha1[] (if the ancestor did not
have the path) or at sha1[] (if we read the object name into the
local array), but 7a98869 (apply: get rid of --index-info in favor
of --build-fake-ancestor, 2007-09-17) made the "missing in the
ancestor" case unnecessary, hence sha1_ptr, when used, always points
at the local array.
Get rid of the unneeded variable, and restructure the if/else
cascade a bit to make it easier to read. There should be no
behaviour change.
Junio C Hamano [Fri, 1 Feb 2013 03:26:21 +0000 (19:26 -0800)]
git-am: record full index line in the patch used while rebasing
Earlier, a230949 (am --rebasing: get patch body from commit, not
from mailbox, 2012-06-26) learned to regenerate patch body from the
commit object while rebasing, instead of reading from the rebase-am
front-end. While doing so, it used "git diff-tree" but without
giving it the "--full-index" option.
This does not matter for in-repository objects; during rebasing, any
abbreviated object name should uniquely identify them.
But we may be rebasing a commit that contains a change to a gitlink,
in which case we usually should not have the object (it names a
commit in the submodule). A full object name is necessary to later
reconstruct a fake ancestor index for them.
Stephen Boyd [Thu, 31 Jan 2013 18:18:40 +0000 (10:18 -0800)]
gpg: close stderr once finished with it in verify_signed_buffer()
Failing to close the stderr pipe in verify_signed_buffer() causes
git to run out of file descriptors if there are many calls to
verify_signed_buffer(). An easy way to trigger this is to run
git log --show-signature --merges | grep "key"
on the linux kernel git repo. Eventually it will fail with
error: cannot create pipe for gpg: Too many open files
error: could not run gpg.
Close the stderr pipe so that this can't happen.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fraser Tweedale [Thu, 31 Jan 2013 12:22:51 +0000 (22:22 +1000)]
push: fix segfault when HEAD points nowhere
After a push of a branch other than the current branch fails in
a no-ff error and if you are still on an unborn branch, the code
recently added to report the failure dereferenced a null pointer
while checking the name of the current branch.
Signed-off-by: Fraser Tweedale <frase@frase.id.au> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 30 Jan 2013 15:47:46 +0000 (07:47 -0800)]
Merge branch 'tb/t0050-maint' into maint
Update tests that were expecting to fail due to a bug that was
fixed earlier.
* tb/t0050-maint:
t0050: Use TAB for indentation
t0050: honor CASE_INSENSITIVE_FS in add (with different case)
t0050: known breakage vanished in merge (case change)
Junio C Hamano [Tue, 29 Jan 2013 19:18:54 +0000 (11:18 -0800)]
Merge branch 'nd/fix-directory-attrs-off-by-one' into maint
The attribute mechanism didn't allow limiting attributes to be
applied to only a single directory itself with "path/" like the
exclude mechanism does. The initial implementation of this that was
merged to 'maint' and 1.8.1.1 had severe performance degradations.
Junio C Hamano [Tue, 29 Jan 2013 19:10:58 +0000 (11:10 -0800)]
README: update stale and/or incorrect information
Ramkumar Ramachandra noticed that the old address for the marc
archive no longer works. Update it to its marc.info address,
and also refer to the gmane site.
Remove the reference to "note from the maintainer", which is not
usually followed by any useful discussion on status, direction nor
tasks.
Also replace the reference to "What's in git.git" with "What's
cooking".
Andrej E Baranov [Mon, 28 Jan 2013 23:41:32 +0000 (00:41 +0100)]
gitweb: refer to picon/gravatar images over the same scheme
With the current code, the images from picon and gravatar are
requested over http://, and browsers give mixed contents warning
when gitweb is served over https://.
Just drop the scheme: part from the URL, so that these external
sites are accessed over https:// in such a case.
Signed-off-by: Andrej E Baranov <admin@andrej-andb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 28 Jan 2013 19:07:18 +0000 (11:07 -0800)]
Merge branch 'mh/ceiling' into maint
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()
Brandon Casey [Sat, 26 Jan 2013 19:14:33 +0000 (11:14 -0800)]
git-p4.py: support Python 2.4
Python 2.4 lacks the following features:
subprocess.check_call
struct.pack_into
Take a cue from 460d1026 and provide an implementation of the
CalledProcessError exception. Then replace the calls to
subproccess.check_call with calls to subprocess.call that check the return
status and raise a CalledProcessError exception if necessary.
The struct.pack_into in t/9802 can be converted into a single struct.pack
call which is available in Python 2.4.
Signed-off-by: Brandon Casey <bcasey@nvidia.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Thu, 24 Jan 2013 23:21:46 +0000 (15:21 -0800)]
ident: do not drop username when reading from /etc/mailname
An earlier conversion from fgets() to strbuf_getline() in the
codepath to read from /etc/mailname to learn the default host-part
of the ident e-mail address forgot that strbuf_getline() stores the
line at the beginning of the buffer just like fgets().
The "username@" the caller has prepared in the strbuf, expecting the
function to append the host-part to it, was lost because of this.
Reported-by: Mihai Rusu <dizzy@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 24 Jan 2013 23:08:37 +0000 (15:08 -0800)]
t9902: protect test from stray build artifacts
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
John Keeping [Thu, 24 Jan 2013 19:18:45 +0000 (19:18 +0000)]
git-cvsimport.txt: cvsps-2 is deprecated
git-cvsimport relies on version 2 of cvsps and does not work with the
new version 3. Since cvsps 3.x does not currently work as well as
version 2 for incremental import, document this fact.
Specifically, there is no way to make new git-cvsimport that supports
cvsps 3.x and have a seamless transition for existing users since cvsps
3.x needs a time from which to continue importing and git-cvsimport does
not save the time of the last import or import into a specific namespace
so there is no safe way to calculate the time of the last import.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Tue, 22 Jan 2013 16:47:47 +0000 (16:47 +0000)]
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
Commit fa2364ec ("Which merge_file() function do you mean?", 06-12-2012)
renamed the files merge-file.[ch] to merge-blobs.[ch], but forgot to
rename the header file in the definition of the LIB_H macro.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 21 Jan 2013 01:22:49 +0000 (17:22 -0800)]
Merge branch 'nz/send-email-headers-are-case-insensitive' into maint
When users spell "cc:" in lowercase in the fake "header" in the
trailer part, "git send-email" failed to pick up the addresses from
there. As e-mail headers field names are case insensitive, this
script should follow suit and treat "cc:" and "Cc:" the same way.
* nz/send-email-headers-are-case-insensitive:
git-send-email: treat field names as case-insensitively
Junio C Hamano [Mon, 21 Jan 2013 01:22:22 +0000 (17:22 -0800)]
Merge branch 'rs/zip-tests' into maint
* rs/zip-tests:
t5003: check if unzip supports symlinks
t5000, t5003: move ZIP tests into their own script
t0024, t5000: use test_lazy_prereq for UNZIP
t0024, t5000: clear variable UNZIP, use GIT_UNZIP instead
Junio C Hamano [Sat, 19 Jan 2013 06:35:04 +0000 (22:35 -0800)]
help: include <common-cmds.h> only in one file
This header not only declares but also defines the contents of the
array that holds the list of command names and help text. Do not
include it in multiple places to waste text space.
Dmitry V. Levin [Mon, 14 Jan 2013 20:59:33 +0000 (00:59 +0400)]
am: invoke perl's strftime in C locale
We used to convert timestamps in metadata comment of Hg patch to
mbox-looking Date: field using strftime, without making sure the
resulting string is not translated. Always use C locale for this.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
