wifi: rt2x00: Switch to use hrtimer_update_function()

The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.

Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/82dcc0eae40bb84e6452f242751c0650e79bd87e.1738746927.git.namcao@linutronix.de

io_uring: Use helper function hrtimer_update_function()

The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.

Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/9b33f490fb1d207d3918ef5e116dc3412ae35c1e.1738746927.git.namcao@linutronix.de

serial: xilinx_uartps: Use helper function hrtimer_update_function()

The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.

Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/af7823518fb060c6c97105a2513cfc61adbdf38f.1738746927.git.namcao@linutronix.de

ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/ed4be9ec380a688291e3fc9b24f8c38a3f07a143.1738746904.git.namcao@linutronix.de

RDMA: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/37bd6895bb946f6d785ab5fe32f1a6f4b9e77c26.1738746904.git.namcao@linutronix.de

virtio: mem: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/4a911503d16684592b59a16d8ade97e42df64a54.1738746904.git.namcao@linutronix.de

drm/vmwgfx: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/6f6664cf2fea2f782e37f64a77fc9f8699794f58.1738746904.git.namcao@linutronix.de

drm/xe/oa: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/08238e193b1f63ae7d5d607fa975420735a869a5.1738746904.git.namcao@linutronix.de

drm/vkms: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/866841803c850c38819f98fdf6bd992ee4a4d012.1738746904.git.namcao@linutronix.de

drm/msm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/2689e1ad4105f415ce8cd9e426873d9ac479dc36.1738746904.git.namcao@linutronix.de

drm/i915/request: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/4fe658e6d8483e44d4fff579bc426e627487f6ca.1738746904.git.namcao@linutronix.de

drm/i915/uncore: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/1d0ad9ab31040d9c3478b77626cdb0a04c0a7bad.1738746904.git.namcao@linutronix.de

drm/i915/pmu: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/71198b93c438866fe2be7323e59cdbf21aa0d493.1738746904.git.namcao@linutronix.de

drm/i915/perf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/b712673a02c7132ea85eff57b0e7e59f6d5d0da0.1738746904.git.namcao@linutronix.de

drm/i915/gvt: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/9af55b7d0918bb3642c6392fbb4800d8ea7c9c50.1738746904.git.namcao@linutronix.de

drm/i915/huc: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/all/d293dd4dd9cb6a9bb9e99f3fc11ea174c6525bf8.1738746904.git.namcao@linutronix.de

drm/amdgpu: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/all/2e3664eebb00d3a8c786ee7cc1fba8096bababc9.1738746904.git.namcao@linutronix.de

stm class: heartbeat: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c822671342e6ca0437b25f8e24935f09821e389f.1738746904.git.namcao@linutronix.de

i2c: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/6a0d31244560b76cc7e76954bf68dbe14a4761e3.1738746904.git.namcao@linutronix.de

iio: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/570792e31b28a94a511c19c6789f2171a6745685.1738746904.git.namcao@linutronix.de

leds: trigger: pattern: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/76fa1cc9777a99a48f49f949abadc1c10af1bc64.1738746904.git.namcao@linutronix.de

mailbox: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/b742f81b6acdaa604511834a06a8aac3e6e63ca3.1738746904.git.namcao@linutronix.de

media: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c725ad8d0ecac3cf6bbc532af567e56d47a6b75c.1738746904.git.namcao@linutronix.de

misc: vcpu_stall_detector: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/a1c984288c6e47d956c07339ced486a8ec95f8d5.1738746904.git.namcao@linutronix.de

mmc: dw_mmc: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/4dec579387ced5e97bb25739fad2ac852e5a689c.1738746904.git.namcao@linutronix.de

ntb: ntb_pingpong: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/2b179e16ab830611fdcb09a33a5a531c9800679b.1738746904.git.namcao@linutronix.de

drivers: perf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/471ea3b829d14a4b4c3c7814dbe1ed13b15d47b8.1738746904.git.namcao@linutronix.de

power: reset: ltc2952-poweroff: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/all/75ef5206f52f194b9c51653628cd2d0b083a482f.1738746904.git.namcao@linutronix.de

power: supply: ab8500_chargalg: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/all/fa0bf7376ce8f124c8285a52d9f55d0ab4c42988.1738746904.git.namcao@linutronix.de

powercap: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/fffc5ecc232069d91817b519dcafd8985120e51c.1738746904.git.namcao@linutronix.de

pps: generators: pps_gen_parport: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/4bf3bb22e21f27c58bb28690d856df913431e693.1738746904.git.namcao@linutronix.de

rtc: class: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/all/22f3f087ddbab1708583033c07c3b7fb17810110.1738746904.git.namcao@linutronix.de

scsi: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c951a5966e134307b8e50afb08e4b742e3f6ad06.1738746904.git.namcao@linutronix.de

serial: xilinx_uartps: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/4a028a23126b3350a5e243dcb49e1ef1b2a4b740.1738746904.git.namcao@linutronix.de

serial: sh-sci: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c21664d013015584aebbb6bb8cedd748182cb551.1738746904.git.namcao@linutronix.de

serial: imx: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/ad27070bc67c13f8a9acbd5cbf4cbae72797e3e1.1738746904.git.namcao@linutronix.de

serial: amba-pl011: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/78e8c0d1b38998eab983fad265751ed13c2b9009.1738746904.git.namcao@linutronix.de

serial: 8250: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/991926d130cc272df30d226760d5d74187991669.1738746904.git.namcao@linutronix.de

usb: typec: tcpm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/7fd2a1f72b3833e1fb36f56f2b28a08c1e64f47e.1738746904.git.namcao@linutronix.de

usb: musb: cppi41: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/80d59a56c76c76ace982417e4dc8ddd37a5441d7.1738746904.git.namcao@linutronix.de

usb: ehci: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/d703731ba61d1901c97758a60ccc3c209d21de0e.1738746904.git.namcao@linutronix.de

usb: gadget: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/7239d6211ffb0dff6351d0549d065277f2562793.1738746904.git.namcao@linutronix.de

usb: fotg210-hcd: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/eeabb788995d7566017ebcff6cc2daa8da35432d.1738746904.git.namcao@linutronix.de

usb: dwc2: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/ab5762d4fd512ac318e7962109d80547d38419cd.1738746904.git.namcao@linutronix.de

USB: chipidea: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/a6e43ac5a90f975343e1cef2d8346b4697ec0473.1738746904.git.namcao@linutronix.de

xfrm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d338b246f087ee2b2a305348c896449e107a7ff4.1738746872.git.namcao@linutronix.de

octeontx2-pf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a935bc6ca7933053f9e349578da4a8fb477b7c2d.1738746872.git.namcao@linutronix.de

igc: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/baeaabb84aef1803dfae385f6e9614d6fc547667.1738746872.git.namcao@linutronix.de

wifi: rt2x00: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely. This new function replaces
hrtimer_init().

However, converting this driver is not obvious: the driver calls
hrtimer_init() in rt2x00dev.c, then set the hrtimer's callback function in
rt2800mmio.c and rt2800usb.c. Therefore, switching to the new function is
not a simple one-for-one replacement.

With the lack of hardware to verify any non-trivial changes, keep it simple
and calls hrtimer_setup() with hrtimer_dummy_timeout() as callback function
pointer.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f086be77528edf0dfb455af4cb984b863084a455.1738746872.git.namcao@linutronix.de

wifi: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/71fbc442aee9a9e892e475f3bbf8f368c6692a55.1738746872.git.namcao@linutronix.de

net/cdc_ncm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/219735f98754fb30dcfd892fbaa5766f9d78c1f1.1738746872.git.namcao@linutronix.de

net: wwan: iosm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e42d7d29879017d4b5ca9555f806e782658e3f21.1738746872.git.namcao@linutronix.de

net: fec: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/c68759ce7879a41d33d1d435c721f156cb1683c2.1738746872.git.namcao@linutronix.de

net: stmmac: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/73598e0c22ca99ce7a0e863298a0e0902f4d6e1d.1738746872.git.namcao@linutronix.de

net: qualcomm: rmnet: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/4312885d95fc99053b2c285f74cc83a852c03f4a.1738746872.git.namcao@linutronix.de

net: mvpp2: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/44e2ebca1a3c1b90213cdb79f7a19ebe0ae70510.1738746872.git.namcao@linutronix.de

net: ieee802154: at86rf230: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/9f701c1b64e248539772aee62e130a7e50bbf1b0.1738746872.git.namcao@linutronix.de

net: sparx5: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d8f0e09bfa4bd4850e363645cc634afeb5779b88.1738746872.git.namcao@linutronix.de

net: ethernet: hisilicon: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/11f5140e157cc0cd02a715f531217b021743aa71.1738746872.git.namcao@linutronix.de

net: ethernet: ec_bhf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2d8fcf9bf83af507f1ca25cb068af2ac32cdcb2c.1738746872.git.namcao@linutronix.de

net: ethernet: cortina: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ddbeac1e5d81df33e9cccb099f520111cb8ce9c4.1738746872.git.namcao@linutronix.de

net: ethernet: ti: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/bd34d3d0dba9a47b6ec5d14776941e9aa118c7d2.1738746872.git.namcao@linutronix.de

can: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Most of this patch is generated by Coccinelle. Except for the TX thrtimer
in bcm_tx_setup() because this timer is not used and the callback function
is never set. For this particular case, set the callback to
hrtimer_dummy_timeout()

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/a3a6be42c818722ad41758457408a32163bfd9a0.1738746872.git.namcao@linutronix.de

can: mcp251xfd: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/af32e1b1814263485be17bca9707d555f857c53f.1738746872.git.namcao@linutronix.de

can: m_can: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/f1a87fcba211f6ce262a2d23fd152185f452c32d.1738746872.git.namcao@linutronix.de

tcp: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a16c227cc6882d8aecf658e6a7e38b74e7fd7573.1738746872.git.namcao@linutronix.de

mac802154: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/5a89d86092d11a1d0cdfdfaa33990aaf7f1eec87.1738746872.git.namcao@linutronix.de

net/sched: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f1d4843589dd924743b35de1f0920c4a4c43be01.1738746872.git.namcao@linutronix.de

netdev: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/861d9b287f2b5206b853dbcc0f302127f2a7f8ac.1738746872.git.namcao@linutronix.de

hwrng: timeriomem: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/010640f1668d40894a1721037c56f7a684dbcc5f.1738746821.git.namcao@linutronix.de

null_blk: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/076cd30acb4b2d6b699f3c80463a8983530d4f06.1738746821.git.namcao@linutronix.de

PM / devfreq: rockchip-dfi: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/all/dfb35fb45eacdba7b8767052aa8c29ca157ac1b0.1738746821.git.namcao@linutronix.de

PM: runtime: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/all/8d1ce108b043896733ce08d3deea6e84941d499b.1738746821.git.namcao@linutronix.de

blk_iocost: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/196d487c925411923a2d59d4bf5e366b9dac2747.1738746821.git.namcao@linutronix.de

ata: pata_octeon_cf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/all/a36ae1e4be26f8359bf2777b1813bbf4d7a7983f.1738746821.git.namcao@linutronix.de

block, bfq: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d0d57e1dab46b617856dfb93c721d221cc31ab0b.1738746821.git.namcao@linutronix.de

tracing/osnoise: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/ff8e6e11df5f928b2b97619ac847b4fa045376a1.1738746821.git.namcao@linutronix.de

watchdog: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a5c62f2b5e1ea1cf4d32f37bc2d21a8eeab2f875.1738746821.git.namcao@linutronix.de

ubifs: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/all/f5767e50aaa2935b3e4a0e9cf1bc4365d6b0c1a0.1738746821.git.namcao@linutronix.de

bpf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e4be2486f02a8e0ef5aa42624f1708d23e88ad57.1738746821.git.namcao@linutronix.de

time: Switch to hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/170bb691a0d59917c8268a98c80b607128fc9f7f.1738746821.git.namcao@linutronix.de

timerfd: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2d1f26c2c2f3ad15f1ca1a09ecb9d760cafef4a6.1738746821.git.namcao@linutronix.de

perf: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f611e6d3fc6996bbcf0e19fe234f75edebe4332f.1738746821.git.namcao@linutronix.de

fork: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/174111145b945391e48936d6debcd43caec3e406.1738746821.git.namcao@linutronix.de

io_uring/timeout: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/80ca8d959f2cc67c75f6d61008e3bebfe7fbc30a.1738746821.git.namcao@linutronix.de

lib: test_objpool: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/edc46fbf290b280ebe67bb0d21599c4c30716b68.1738746821.git.namcao@linutronix.de

mm/slab: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/030065d66630068f788caf9df15756fad404e754.1738746821.git.namcao@linutronix.de

sched: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a55e849cba3c41b4c5708be6ea6be6f337d1a8fb.1738746821.git.namcao@linutronix.de

s390/ap_bus: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d8a3919c09caa671e64d9f9bbf726aa8a885a844.1738746821.git.namcao@linutronix.de

perf/x86: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e84ad5a660b8e10867e547db8e64f7e99c48ebba.1738746821.git.namcao@linutronix.de

powerpc/watchdog: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/099ebf6d352094a56e22fdfe76582b50f8fd6029.1738746821.git.namcao@linutronix.de

ARM: 8611/1: l2x0: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/5ca584b1e32c34630bb15ccc84467c1e05059e66.1738746821.git.namcao@linutronix.de

ARM: imx: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aff915511ee629b461fee98688b8e859075386ac.1738746821.git.namcao@linutronix.de

riscv: kvm: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d5ededf778f59f2fc38ff4276fb7f4c893e4142c.1738746821.git.namcao@linutronix.de

LoongArch: KVM: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a5b1b53813a15a73afdfff6fbb4c9064fa582be1.1738746821.git.namcao@linutronix.de

KVM: arm64: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/59f527713562ad491df7c216eeee0378e0eb2402.1738746821.git.namcao@linutronix.de

KVM: x86: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/5051cfe7ed48ef9913bf2583eeca6795cb53d6ae.1738746821.git.namcao@linutronix.de

KVM: s390: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/all/637865c62963fb8cddf6c4368ca12434988a8c27.1738746821.git.namcao@linutronix.de

KVM: PPC: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a58c4f16b1cfba13f96201fda355553850a97562.1738746821.git.namcao@linutronix.de

KVM: MIPS: Switch to use hrtimer_setup()

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/34004267eba24388fb50ef6de1b8dd7addba6475.1738746821.git.namcao@linutronix.de