Zhangjin Wu [Mon, 7 Aug 2023 11:00:48 +0000 (19:00 +0800)]
tools/nolibc: silence ppc64 compile warnings
Silence the following warnings reported by the new -Wall -Wextra options
with pure assembly code.
In file included from sysroot/powerpc/include/stdio.h:13,
from nolibc-test.c:13:
sysroot/powerpc/include/arch.h: In function '_start':
sysroot/powerpc/include/arch.h:192:32: warning: unused variable 'r2' [-Wunused-variable]
192 | register volatile long r2 __asm__ ("r2") = (void *)&TOC - (void *)_start;
| ^~
sysroot/powerpc/include/arch.h:187:97: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
187 | void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void)
| ^~~~~~
Since only elfv2 ABI requires to save the TOC/GOT pointer to r2
register, when using elfv1 ABI, the old C code is simply ignored by the
compiler, but the compiler can not ignore the inline assembly code and
will introduce build failure or running segfaults. So, let's further
only add the new assembly code for elfv2 ABI with the checking of
_CALL_ELF == 2.
Zhangjin Wu [Sat, 5 Aug 2023 06:12:06 +0000 (14:12 +0800)]
tools/nolibc: stackprotector.h: make __stack_chk_init static
This allows to generate smaller text/data/dec size.
As the _start_c() function added by crt.h, __stack_chk_init() is called
from _start_c() instead of the assembly _start. So, it is able to mark
it with static now.
Zhangjin Wu [Sat, 5 Aug 2023 18:44:58 +0000 (02:44 +0800)]
selftests/nolibc: add test support for ppc64
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64 variant for big endian 64-bit PowerPC, users can pass XARCH=ppc64
to test it.
The powernv machine of qemu-system-ppc64 is used with
powernv_be_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- differs from little endian 64-bit PowerPC, vmlinux is used instead of
zImage, because big endian zImage [2] only boot on qemu with x-vof=on
(added from qemu v7.0) and a fixup patch [3] for qemu v7.0.51:
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
- for big endian ppc64, as the help message from arch/powerpc/Kconfig
shows, the V2 ABI is standard for 64-bit little-endian, but for
big-endian it is less well tested by kernel and toolchain, so, use
elfv1 as-is, no need to explicitly ask toolchain to use elfv2 here.
Zhangjin Wu [Sat, 5 Aug 2023 18:43:53 +0000 (02:43 +0800)]
selftests/nolibc: add test support for ppc64le
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64le variant for little endian 64-bit PowerPC, users can pass
XARCH=ppc64le to test it.
The powernv machine of qemu-system-ppc64le is used for there is just a
working powernv_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- little endian ppc64 prefers elfv2 to elfv1 if the toolchain (e.g. gcc
13.1.0) supports it, let's align with kernel, otherwise, our elfv1
binary will not run on kernel with elfv2 ABI.
Zhangjin Wu [Sat, 5 Aug 2023 18:42:43 +0000 (02:42 +0800)]
selftests/nolibc: add test support for ppc
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc variant for 32-bit PowerPC and uses it as the default variant of
powerpc architecture.
Users can pass XARCH=ppc (or ARCH=powerpc) to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit
powerpc kernel with pmac32_defconfig. The missing PMACZILOG serial tty
and console are enabled in another patch [2].
Note,
- zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are
overlapping" error, so, vmlinux is used instead.
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
Zhangjin Wu [Sat, 5 Aug 2023 18:41:37 +0000 (02:41 +0800)]
selftests/nolibc: add XARCH and ARCH mapping support
Most of the CPU architectures have different variants, but kernel
usually only accepts parts of them via the ARCH variable, the others
should be customized via kernel config files.
To simplify testing, a new XARCH variable is added to extend the
kernel's ARCH with a few variants of the same architecture, and it is
used to customize variant specific variables, at last XARCH is converted
to the kernel's ARCH:
e.g. make run XARCH=<one of the supported variants>
| \
| `-> variant specific variables:
| IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ...
\
`---> kernel's ARCH
XARCH and ARCH are carefully mapped to allow users to pass architecture
variants via XARCH or pass architecture via ARCH from cmdline.
PowerPC is the first user and also a very good reference architecture of
this mapping, it has variants with different combinations of
32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If
the target architecture only has one variant, XARCH is simply an alias
of ARCH, no additional mapping required.
Zhangjin Wu [Sat, 5 Aug 2023 18:40:31 +0000 (02:40 +0800)]
tools/nolibc: add support for powerpc64
This follows the 64-bit PowerPC ABI [1], refers to the slides: "A new
ABI for little-endian PowerPC64 Design & Implementation" [2] and the
musl code in arch/powerpc64/crt_arch.h.
First, stdu and clrrdi are used instead of stwu and clrrwi for
powerpc64.
Second, the stack frame size is increased to 32 bytes for powerpc64, 32
bytes is the minimal stack frame size supported described in [2].
Besides, the TOC pointer (GOT pointer) must be saved to r2.
This works on both little endian and big endian 64-bit PowerPC.
Zhangjin Wu [Sat, 5 Aug 2023 18:39:26 +0000 (02:39 +0800)]
tools/nolibc: add support for powerpc
Both syscall declarations and _start code definition are added for
powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit)
to record the error occurred, and uses another register to return the
value [1]. So, the return value of every syscall declaration must be
normalized to match the __sysret() helper, return -value when there is
an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit,
glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register
to r0 at first, and then check the summary overflow bit in cr0:
selftests/nolibc: prevent out of bounds access in expect_vfprintf
If read() fails and returns -1 (or returns garbage for some other
reason) buf would be accessed out of bounds.
Only use the return value of read() after it has been validated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
Willy Tarreau [Sun, 6 Aug 2023 10:58:52 +0000 (12:58 +0200)]
selftests/nolibc: avoid warnings during intptr tests
Recent fix ceb528feb7c8 ("selftests/nolibc: avoid gaps in test numbers")
had the annoying side effect of always returning skipped tests, which
are normally supposed to happen only when certain features are missing
to run the test (missing kernel options, toolchain not supporting
stack-protector etc). As such there are now always warnings. Let's
modify the test to not use the condition and instead use a ternary
expression to check the result.
Fixes: ceb528feb7c8 ("selftests/nolibc: avoid gaps in test numbers") Cc: Thomas WeiÃ<9F>schuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
tools/nolibc: stdint: use __SIZE_TYPE__ for size_t
Otherwise both gcc and clang may generate warnings about type
mismatches:
sysroot/mips/include/string.h:12:14: warning: mismatch in argument 1 type of built-in function 'malloc'; expected 'unsigned int' [-Wbuiltin-declaration-mismatch]
12 | static void *malloc(size_t len);
| ^~~~~~
The compiler provides __SIZE_TYPE__ as the type that corresponds to size_t
(typically "long unsigned int" or "unsigned int"). It was verified to be
available at least since gcc-3.4 and clang-3.8, so from now on we'll use
this definition for size_t.
Yuan Tan [Tue, 1 Aug 2023 15:40:23 +0000 (23:40 +0800)]
selftests/nolibc: add testcase for pipe
Add a test case of pipe that sends and receives message in a single
process.
Suggested-by: Thomas Weißschuh <thomas@t-8ch.de> Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/all/c5de2d13-3752-4e1b-90d9-f58cca99c702@t-8ch.de/ Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
[wt: fixed the "len" type to size_t to address a sign-compare warning
with upcoming patches] Signed-off-by: Willy Tarreau <w@1wt.eu>
Yuan Tan [Tue, 1 Aug 2023 15:39:54 +0000 (23:39 +0800)]
tools/nolibc: add pipe() and pipe2() support
According to manual page [1], posix spec [2] and source code like
arch/mips/kernel/syscall.c, for historic reasons, the sys_pipe() syscall
on some architectures has an unusual calling convention. It returns
results in two registers which means there is no need for it to do
verify the validity of a userspace pointer argument. Historically that
used to be expensive in Linux. These days the performance advantage is
negligible.
Nolibc doesn't support the unusual calling convention above, luckily
Linux provides a generic sys_pipe2() with an additional flags argument
from 2.6.27. If flags is 0, then pipe2() is the same as pipe(). So here
we use sys_pipe2() to implement the pipe().
pipe2() is also provided to allow users to use flags argument on demand.
Thomas Weißschuh [Wed, 26 Jul 2023 06:08:13 +0000 (08:08 +0200)]
selftests/nolibc: avoid buffer underrun in space printing
If the test description is longer than the status alignment the
parameter 'n' to putcharn() would lead to a signed underflow that then
gets converted to a very large unsigned value.
This in turn leads out-of-bound writes in memset() crashing the
application.
The failure case of EXPECT_PTRER() used in "mmap_bad" exhibits this
exact behavior.
Fixes: 29f5540be392 ("selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRER") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
Ryan Roberts [Wed, 26 Jul 2023 07:06:55 +0000 (08:06 +0100)]
tools/nolibc/stdio: add setvbuf() to set buffering mode
Add a minimal implementation of setvbuf(), which error checks the mode
argument (as required by spec) and returns. Since nolibc never buffers
output, nothing needs to be done.
The kselftest framework recently added a call to setvbuf(). As a result,
any tests that use the kselftest framework and nolibc cause a compiler
error due to missing function. This provides an urgent fix for the
problem which is preventing arm64 testing on linux-next.
Example:
clang --target=aarch64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-Werror=option-ignored -Werror=unused-command-line-argument
--target=aarch64-linux-gnu -fintegrated-as
-fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \
-include ../../../../include/nolibc/nolibc.h -I../..\
-static -ffreestanding -Wall za-fork.c
build/kselftest/arm64/fp/za-fork-asm.o
-o build/kselftest/arm64/fp/za-fork
In file included from <built-in>:1:
In file included from ./../../../../include/nolibc/nolibc.h:97:
In file included from ./../../../../include/nolibc/arch.h:25:
./../../../../include/nolibc/arch-aarch64.h:178:35: warning: unknown
attribute 'optimize' ignored [-Wunknown-attributes]
void __attribute__((weak,noreturn,optimize("omit-frame-pointer")))
__no_stack_protector _start(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from za-fork.c:12:
../../kselftest.h:123:2: error: call to undeclared function 'setvbuf';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
setvbuf(stdout, NULL, _IOLBF, 0);
^
../../kselftest.h:123:24: error: use of undeclared identifier '_IOLBF'
setvbuf(stdout, NULL, _IOLBF, 0);
^
1 warning and 2 errors generated.
selftests/nolibc: allow test -include /path/to/nolibc.h
As the head comment of nolibc-test.c shows, it can be built in 3 ways:
$(CC) -nostdlib -include /path/to/nolibc.h => NOLIBC already defined
$(CC) -nostdlib -I/path/to/nolibc/sysroot => _NOLIBC_* guards are present
$(CC) with default libc => NOLIBC* never defined
Only last two of them are tested currently, let's allow test the first one too.
This may help to find issues about using nolibc.h to build programs. it
derives from this change:
commit 3a8039e289a3 ("tools/nolibc: Fix build of stdio.h due to header ordering")
Usage:
// test with sysroot by default
$ make run-user
// test without sysroot, using nolibc.h directly
$ make run-user NOLIBC_SYSROOT=0
As suggested by Thomas, It is able to move the stackprotector
initialization from the assembly _start to the beginning of the new
_start_c(). Let's call __stack_chk_init() in _start_c() as a
preparation.
As the environ and _auxv support added for nolibc, the assembly _start
function becomes more and more complex and therefore makes the porting
of nolibc to new architectures harder and harder.
To simplify portability, this C version of _start_c() is added to do
most of the assembly start operations in C, which reduces the complexity
a lot and will eventually simplify the porting of nolibc to the new
architectures.
The new _start_c() only requires a stack pointer argument, it will find
argc, argv, envp/environ and _auxv for us, and then call main(),
finally, it exit() with main's return status. With this new _start_c(),
the future new architectures only require to add very few assembly
instructions.
As suggested by Thomas, users may use a different signature of main
(e.g. void main(void)), a _nolibc_main alias is added for main to
silence the warning about potential conflicting types.
As suggested by Willy, the code is carefully polished for both smaller
size and better readability with local variables and the right types.
The statx manpage [1] shows that it has been supported from Linux 4.11
and glibc 2.28, the Linux support can be checked for all of the
architectures with this command:
Besides riscv and loongarch, all of the nolibc supported architectures
have added sys_statx from Linux v4.11. riscv is mainlined to v4.15,
loongarch is mainlined to v5.19, both of them use the generic unistd.h,
so, they have added sys_statx from their first mainline versions.
The current oldest stable branch is v4.14, only reserving sys_statx
still preserves compatibility with all of the supported stable branches,
So, let's remove the old arch related and dependent sys_stat support
completely.
This is friendly to the future new architecture porting.
tools/nolibc: fix up startup failures for -O0 under gcc < 11.1.0
As gcc doc [1] shows:
Most optimizations are completely disabled at -O0 or if an -O level is
not set on the command line, even if individual optimization flags are
specified.
Test result [2] shows, gcc>=11.1.0 deviates from the above description,
but before gcc 11.1.0, "-O0" still forcely uses frame pointer in the
_start function even if the individual optimize("omit-frame-pointer")
flag is specified.
The frame pointer related operations will change the stack pointer (e.g.
In x86_64, an extra "push %rbp" will be inserted at the beginning of
_start) and make it differs from the one we expected, as a result, break
the whole startup function.
To fix up this issue, as suggested by Thomas, the individual "Os" and
"omit-frame-pointer" optimize flags are used together on _start function
to disable frame pointer completely even if the -O0 is set on the
command line.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/34b21ba5-7b59-4b3b-9ed6-ef9a3a5e06f7@t-8ch.de/ Fixes: 7f8548589661 ("tools/nolibc: make compiler and assembler agree on the section around _start") Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
tools/nolibc: arch-*.h: add missing space after ','
Fix up such errors reported by scripts/checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
ERROR: space required after that ',' (ctx:VxV)
#148: FILE: tools/include/nolibc/arch-aarch64.h:148:
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) __no_stack_protector _start(void)
^
Thomas Weißschuh [Tue, 11 Jul 2023 09:48:42 +0000 (11:48 +0200)]
selftests/nolibc: avoid gaps in test numbers
As the test numbers are based on line numbers gaps without testcases are
to be avoided.
Instead use the already existing test condition logic to implement
conditional execution.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
Thomas Weißschuh [Tue, 11 Jul 2023 09:48:40 +0000 (11:48 +0200)]
selftests/nolibc: simplify status printing
pad_spc() is only ever used to print the status message of testcases.
The line size is always constant, the return value is never used and the
format string is never used as such.
Remove all the unneeded logic and simplify the API and its users.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
Thomas Weißschuh [Tue, 11 Jul 2023 09:48:39 +0000 (11:48 +0200)]
selftests/nolibc: make evaluation of test conditions
If "cond" is a multi-token statement the behavior of the preprocessor
will lead to the negation "!" to be only applied to the first token.
Although currently no test uses such multi-token conditions but it can
happen at any time.
Put braces around "cond" to ensure the negation works as expected.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
Thomas Weißschuh [Mon, 10 Jul 2023 18:01:34 +0000 (20:01 +0200)]
tools/nolibc: completely remove optional environ support
In commit 52e423f5b93e ("tools/nolibc: export environ as a weak symbol on i386")
and friends the asm startup logic was extended to directly populate the
"environ" array.
This makes it impossible for "environ" to be dropped by the linker.
Therefore also drop the other logic to handle non-present "environ".
Also add a testcase to validate the initialization of environ.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
selftests/nolibc: chdir_root: restore current path after test
The PWD environment variable has the path of the nolibc-test program,
the current path must be the same as it, otherwise, the test cases will
fail with relative path (e.g. ./nolibc-test).
Since only chdir_root really changes the current path, let's restore it
with the PWD environment variable.
The vfprintf test case require to open a temporary file to write, the
old memfd_create() method is perfect but has strong dependency on
MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig):
config MEMFD_CREATE
def_bool TMPFS || HUGETLBFS
And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable
memfd, otherwise, The kernel warning will be output to the test result
like this:
Running test 'vfprintf'
0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init'
"" = "" [OK]
To avoid such warning and also to remove the MEMFD_CREATE dependency,
let's open a file from tmpfs directly.
The /tmp directory is used to detect the existing of tmpfs, if not
there, skip instead of fail.
And further, for pid == 1, the initramfs is loaded as ramfs, which can
be used as tmpfs, so, it is able to further remove TMPFS dependency too.
selftests/nolibc: fix up failures when CONFIG_PROC_FS=n
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc
directory has been created in the prepare() stage whenever /proc is
there or not.
so, the checking of /proc in the run_syscall() stage will be always true
and at last it will fail all of the procfs dependent test cases, which
deviates from the 'cond' check design of the EXPECT_xx macros, without
procfs, these test cases should be skipped instead of failed.
To solve this issue, one method is checking /proc/self instead of /proc,
another method is removing the /proc directory completely for
CONFIG_PROC_FS=n, we apply the second method to avoid misleading the
users.
selftests/nolibc: fix up kernel parameters support
kernel parameters allow pass two types of strings, one type is like
'noapic', another type is like 'panic=5', the first type is passed as
arguments of the init program, the second type is passed as environment
variables of the init program.
when users pass kernel parameters like this:
noapic NOLIBC_TEST=syscall
our nolibc-test program will use the test setting from argv[1] and
ignore the one from NOLIBC_TEST environment variable, and at last, it
will print the following line and ignore the whole test setting.
Ignoring unknown test name 'noapic'
reversing the parsing order does solve the above issue:
test = getenv("NOLIBC_TEST");
if (test)
test = argv[1];
but it still doesn't work with such kernel parameters (without
NOLIBC_TEST environment variable):
noapic FOO=bar
To support all of the potential kernel parameters, let's verify the test
setting from both of argv[1] and NOLIBC_TEST environment variable.
selftests/nolibc: prefer <sys/reboot.h> to <linux/reboot.h>
Since both glibc and musl provide RB_ flags via <sys/reboot.h>, and we
just add RB_ flags for nolibc, let's use RB_ flags instead of
LINUX_REBOOT_ flags and only reserve the required <sys/reboot.h> header.
This allows compile libc-test for musl libc without the linux headers.
selftests/nolibc: fix up int_fast16/32_t test cases for musl
musl limits the fast signed int in 32bit, but glibc and nolibc don't, to
let such test cases work on musl, let's provide the type based
SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type).
Let's define _LARGEFILE64_SOURCE to fix up this compile error:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’:
tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration]
453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer));
| ^~~~~~~~~~
| getdents
/usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64':
nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64'
collect2: error: ld returned 1 exit status
selftests/nolibc: add sbrk_0 to test current brk getting
>From musl 0.9.14 (to the latest version 1.2.3), both sbrk() and brk()
have almost been disabled for they conflict with malloc, only sbrk(0) is
still permitted as a way to get the current location of the program
break, let's support such case.
EXPECT_PTRNE() is used to expect sbrk() always successfully getting the
current break.
selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRER
The syscalls like sbrk() and mmap() return pointers, to test them, more
pointer compare test macros are required, add them:
- EXPECT_PTREQ() expects two equal pointers.
- EXPECT_PTRNE() expects two non-equal pointers.
- EXPECT_PTRER() expects failure with a specified errno.
- EXPECT_PTRER2() expects failure with one of two specified errnos.
argv0 is the path to nolibc-test program itself, which is a very good
always existing readable file for some tests, let's export it.
Note, the path may be absolute or relative, please make sure the tests
work with both of them. If it is relative, we must make sure the current
path is the one specified by the PWD environment variable.
- Since all supported architectures have my_syscall6() now, remove the
#ifdef check.
- Move the mmap() related macros to tools/include/nolibc/types.h and
reuse most of them from <linux/mman.h>
- Apply the new generic __sysret() to convert the calling of sys_map()
to oneline code
Note, since MAP_FAILED is -1 on Linux, so we can use the generic
__sysret() which returns -1 upon error and still satisfy user land that
checks for MAP_FAILED.
Zhangjin Wu [Mon, 19 Jun 2023 12:25:47 +0000 (20:25 +0800)]
tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYS
Compiling nolibc for rv32 got such errors:
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_gettimeofday’:
nolibc/sysroot/riscv/include/sys.h:557:21: error: ‘__NR_gettimeofday’ undeclared (first use in this function); did you mean ‘sys_gettimeofday’?
557 | return my_syscall2(__NR_gettimeofday, tv, tz);
| ^~~~~~~~~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_lseek’:
nolibc/sysroot/riscv/include/sys.h:675:21: error: ‘__NR_lseek’ undeclared (first use in this function)
675 | return my_syscall3(__NR_lseek, fd, offset, whence);
| ^~~~~~~~~~
nolibc/sysroot/riscv/include/sys.h: In function ‘sys_wait4’:
nolibc/sysroot/riscv/include/sys.h:1341:21: error: ‘__NR_wait4’ undeclared (first use in this function)
1341 | return my_syscall4(__NR_wait4, pid, status, options, rusage);
If a syscall macro is not supported by a target platform, wrap it with
'#ifdef' and 'return -ENOSYS' for the '#else' branch, which lets the
other syscalls work as-is and allows developers to fix up the test
failures reported by nolibc-test one by one later.
This wraps all of the failed syscall macros with '#ifdef' and 'return
-ENOSYS' for the '#else' branch, so, all of the undeclared failures are
fixed.
Zhangjin Wu [Mon, 19 Jun 2023 12:24:15 +0000 (20:24 +0800)]
tools/nolibc: fix up #error compile failures with -ENOSYS
Compiling nolibc for rv32 got such errors:
In file included from nolibc/sysroot/riscv/include/nolibc.h:99,
from nolibc/sysroot/riscv/include/errno.h:26,
from nolibc/sysroot/riscv/include/stdio.h:14,
from tools/testing/selftests/nolibc/nolibc-test.c:12:
nolibc/sysroot/riscv/include/sys.h:946:2: error: #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
946 | #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll()
| ^~~~~
nolibc/sysroot/riscv/include/sys.h:1062:2: error: #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
1062 | #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select()
If a syscall is not supported by a target platform, 'return -ENOSYS' is
better than '#error', which lets the other syscalls work as-is and
allows developers to fix up the test failures reported by nolibc-test
one by one later.
This converts all of the '#error' to 'return -ENOSYS', so, all of the
'#error' failures are fixed.
Zhangjin Wu [Mon, 19 Jun 2023 07:01:43 +0000 (15:01 +0800)]
selftests/nolibc: restore the failed tests print
The commit fa0df56a804b ("selftests/nolibc: also count skipped and
failed tests in output") added counting for the skipped and failed
tests, but also removed the 'FAIL' results print, let's restore it for
it really allow users to learn the failed details without opening the
log file.
Zhangjin Wu [Mon, 19 Jun 2023 06:57:34 +0000 (14:57 +0800)]
selftests/nolibc: always print the path to test log file
Even when there is no failure, developers may be still interested in the
test log file, especially, string alignment, duplicated print, kernel
message and so forth, so, always print the path to test log file.
A new line is added for such a print to avoid annoying people who don't
care about it when the test pass completely.
projects / thirdparty / kernel / linux.git / log
