dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller
Add support for Airoha EN7581 GPIO System Controller which provide a
register map for controlling the GPIO, pinctrl and PWM of the SoC via
dedicated pinctrl and pwm child nodes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-4-afb0cbcab0ec@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lorenzo Bianconi [Tue, 22 Oct 2024 23:20:01 +0000 (01:20 +0200)]
dt-bindings: arm: airoha: Add the chip-scu node for EN7581 SoC
This patch adds the chip-scu document bindings for EN7581 SoC.
The airoha chip-scu block provides a configuration interface for clock,
io-muxing and other functionalities used by multiple controllers (e.g.
clock, pinctrl, ecc.) on EN7581 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-1-afb0cbcab0ec@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Dan Carpenter [Wed, 23 Oct 2024 08:39:47 +0000 (11:39 +0300)]
pinctrl: spacemit: fix double free of map
The map pointer is freed by pinctrl_utils_free_map(). It must not be a
devm_ pointer or it leads to a double free when the device is unloaded.
This is similar to a couple bugs Harshit Mogalapalli fixed earlier in
commits 3fd976afe974 ("pinctrl: nuvoton: fix a double free in
ma35_pinctrl_dt_node_to_map_func()") and 4575962aeed6 ("pinctrl: sophgo:
fix double free in cv1800_pctrl_dt_node_to_map()").
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Yixun Lan <dlan@gentoo.org> Link: https://lore.kernel.org/4b5f1306-dc01-4edc-96d3-b232b930ddf2@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Markuss Broks [Sat, 26 Oct 2024 20:32:35 +0000 (23:32 +0300)]
dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint
Add the compatible for Samsung Exynos9810 pinctrl eint block
to the schema. It is compatible with Exynos850 EINT controller,
and doesn't have a dedicated IRQ line.
Markuss Broks [Sat, 26 Oct 2024 20:32:34 +0000 (23:32 +0300)]
dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC
Add a compatible for Samsung Exynos9810 pinctrl block to the schema.
Exynos9810 has 9 total pin banks and it's similar to other Samsung
SoC pinctrl blocks.
Mukesh Ojha [Mon, 14 Oct 2024 19:29:30 +0000 (00:59 +0530)]
pinmux: Use sequential access to access desc->pinmux data
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
Marek Vasut [Thu, 17 Oct 2024 21:11:18 +0000 (23:11 +0200)]
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: Convert i.MX35/5x/6 to YAML
The IOMUXC controller description is almost identical on i.MX35/5x/6 SoCs,
except for the configuration bits which differ across SoCs. Rename the
fsl,imx6ul-pinctrl.yaml to fsl,imx35-pinctrl.yaml, fill in compatible
strings for the other SoCs and fill in the various bits into desciption.
This way, i.MX35/5x/6 series SoCs can all be converted to DT schema.
Remove the old text DT bindings description.
Jean Delvare [Tue, 22 Oct 2024 11:40:17 +0000 (13:40 +0200)]
pinctrl: imx-scmi: Drop obsolete dependency on COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), OF
can be enabled on all architectures. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
As ARM_SCMI_PROTOCOL already depends on COMPILE_TEST, we also don't
need to add COMPILE_TEST as an alternative dependency for it.
Dmitry Baryshkov [Fri, 18 Oct 2024 08:42:40 +0000 (11:42 +0300)]
pinctrl: qcom: add support for TLMM on SAR2130P
Add driver for the pincontrol device as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.
Yixun Lan [Wed, 16 Oct 2024 00:59:42 +0000 (08:59 +0800)]
pinctrl: spacemit: add support for SpacemiT K1 SoC
SpacemiT's K1 SoC has a pinctrl controller which use single register
to describe all functions, which include bias pull up/down(strong pull),
drive strength, schmitter trigger, slew rate, mux mode.
Add a dedicated compatible for the exynos990-wakeup-eint node.
This SoC pin controller does not mux interrupts. It's compatible with
Exynos 850's node, while also being compatible with the Exynos7
fallback.
Colin Ian King [Wed, 16 Oct 2024 15:56:55 +0000 (16:56 +0100)]
pinctrl: th1520: Fix potential null pointer dereference on func
The initialization of muxtype deferences pointer func before func
is sanity checked with a null pointer check, hence we have a null
pointer deference issue. Fix this by only deferencing func with
the assignment to muxtype after func has been null pointer checked.
Fixes: 1fc30cd92770 ("pinctrl: th1520: Factor out casts") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reported-by: Kees Bakker <kees@ijzerbout.nl> Acked-by: Drew Fustini <dfustini@tenstorrent.com> Link: https://lore.kernel.org/20241016155655.334518-1-colin.i.king@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
dt-bindings: pinctrl: samsung: Fix interrupt constraint for variants with fallbacks
Commit 904140fa4553 ("dt-bindings: pinctrl: samsung: use Exynos7
fallbacks for newer wake-up controllers") added
samsung,exynos7-wakeup-eint fallback to some compatibles, so the
intention in the if:then: conditions was to handle the cases:
1. Single Exynos7 compatible or Exynos5433+Exynos7 or
Exynos7885+Exynos7: only one interrupt
2. Exynos850+Exynos7: no interrupts
This was not implemented properly however and if:then: block matches
only single Exynos5433 or Exynos7885 compatibles, which do not exist in
DTS anymore, so basically is a no-op and no enforcement on number of
interrupts is made by the binding.
Fix the if:then: condition so interrupts in the Exynos5433 and
Exynos7885 wake-up pin controller will be properly constrained.
Fixes: 904140fa4553 ("dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers") Cc: stable@vger.kernel.org Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241015065848.29429-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pinctrl: PINCTRL_K230 should depend on ARCH_CANAAN
The Canaan Kendryte K230 pin controller is only present on Canaan
Kendryte K230 SoCs. Hence add a dependency on ARCH_CANAAN, to prevent
asking the user about this driver when configuring a kernel without
Canaan Kendryte series SoC platform support.
Arnd Bergmann [Tue, 15 Oct 2024 15:11:13 +0000 (15:11 +0000)]
pinctrl: th1520: add a CONFIG_OF dependency
When compile-testing without CONfIG_OF:
drivers/pinctrl/pinctrl-th1520.c: In function 'th1520_pinctrl_dt_node_to_map':
drivers/pinctrl/pinctrl-th1520.c:455:23: error: implicit declaration of function 'pinconf_generic_parse_dt_config'; did you mean 'pinconf_generic_dump_config'? [-Wimplicit-function-declaration]
455 | ret = pinconf_generic_parse_dt_config(child, pctldev, &configs, &nconfigs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| pinconf_generic_dump_config
pinctrl: Switch back to struct platform_driver::remove()
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
When Drew took over the pinctrl driver it seems like he didn't use the
git tree I pointed him at and thus missed some important fixes to the
tables describing valid pinmux settings.
The documentation has a nice overview table of these settings but
unfortunately it doesn't fully match the register descriptions, which
seem to be the correct version.
Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Drew Fustini <dfustini@tenstorrent.com> Tested-by: Drew Fustini <dfustini@tenstorrent.com> Link: https://lore.kernel.org/20241011144826.381104-3-emil.renner.berthing@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When Drew took over the pinctrl driver he must have changed
all the -ENOTSUPP returns into -EOPNOTSUPP. This subtle change
was most likely not spotted because it was never mentioned in the
changelog of the patchset, but it breaks all the places in the
pin control and GPIO frameworks where -ENOTSUPP is expected.
Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Drew Fustini <dfustini@tenstorrent.com> Tested-by: Drew Fustini <dfustini@tenstorrent.com> Link: https://lore.kernel.org/20241011144826.381104-2-emil.renner.berthing@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Added definitions for some pins which were missing from the
S32G2 SIUL2 pinctrl driver. These pins are used by the JTAG,
PFE and LLCE hardware modules.
Drew Fustini [Wed, 9 Oct 2024 01:16:48 +0000 (18:16 -0700)]
pinctrl: th1520: Convert dt child node loop to scoped iterator
Convert th1520_pinctrl_dt_node_to_map() to use a scoped iterator with
for_each_available_child_of_node_scoped(). As a result, there is no need
to call of_node_put() anymore. The put_child label has been renamed to
free_map which is now a more accurate description.
Lad Prabhakar [Fri, 4 Oct 2024 12:36:56 +0000 (13:36 +0100)]
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow schmitt and open drain properties
On the RZ/V2H(P) SoC one can configure the 'input-schmitt-{enable,disable}',
'drive-open-drain' and 'drive-push-pull' of multiplexed pins. Update the
binding documentation to include these properties.
The RZ/V2H(P) SoC has 16 IRQ interrupts, while every other SoC has 8,
and this affects the start index of TINT interrupts (1 + 16 = 17, rather
than 1 + 8 = 9).
Macro RZG2L_TINT_IRQ_START_INDEX cannot work anymore, replace it with a
new member within struct rzg2l_hwcfg.
Linus Walleij [Thu, 3 Oct 2024 14:16:47 +0000 (16:16 +0200)]
pinctrl: imx27: Fix too generic defines
The "PC" define is colliding with the (apparently broadcased)
define for "program counter" on Loongarch, so let's rename all
these 2-letter defines so they don't collide with stuff.
Fixes: a55222b7a132 ("pinctrl: freescale: enable use with COMPILE_TEST") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410030214.dPrgmUqd-lkp@intel.com/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20241003-fix-imx27-pc-v1-1-0e78d1fc6175@linaro.org
Esben Haabendal [Thu, 3 Oct 2024 09:23:09 +0000 (11:23 +0200)]
pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.
Linus Walleij [Wed, 2 Oct 2024 14:18:36 +0000 (16:18 +0200)]
pinctrl: imx1: Fix too generic defines
The "PC" define is colliding with the (apparently broadcased)
define for "program counter" on Loongarch, so let's rename all
these 2-letter defines so they don't collide with stuff.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410020940.wGISlWfV-lkp@intel.com/ Fixes: a55222b7a132 ("pinctrl: freescale: enable use with COMPILE_TEST") Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Quentin Schulz [Wed, 2 Oct 2024 12:03:03 +0000 (14:03 +0200)]
pinctrl: rockchip: improve error message for incorrect rockchip,pins property
If one improperly writes a rockchip,pins property, the pinctrl driver
basically just states that one in the myriad of pinctrl nodes is
improper but does not tell you which one.
Instead, let's print the full name of the Device Tree node that is
improper as well as provide more context on what the expected content
is.
Note that this should be rather unnecessary if one reads the output of
the dtbs_check as it would be highlighted as an error.
Mark Brown [Tue, 24 Sep 2024 15:39:18 +0000 (17:39 +0200)]
pinctrl: sx150x: Use maple tree register cache
The sx150x driver uses a rbtree register cache with no obvious reason for
specifically preferring it. The maple tree register cache is based on a
more modern data structure and makes implementation decisions more suitable
for modern systems so let's switch the driver to use that. No functional
change.
pinctrl: aw9523: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
dt-bindings: pinctrl: document the QCS615 Top Level Mode Multiplexer
Document the Top Level Mode Multiplexer on the QCS615 Platform.
It concisely explains the pin multiplexing and configuration in
the device tree, and includes simple examples of typical device
tree snippets, making it easier for designers to configure and
manage chip pins.
Ze Huang [Thu, 26 Sep 2024 15:57:44 +0000 (23:57 +0800)]
pinctrl: canaan: Add support for k230 SoC
Configuration of the K230 is similar to that of the K210. However, in
K210, the 256 functions for each pin are shared, whereas in K230,
multiplex functions are different for every pin.
`drv_data` of `pinctrl_pin_desc` is pointing to currently activated
group, which is used to print the name of current function of pin in
`pin_dbg_show` and will be updated in `set_mux`, so they are not set
const.
Daniel Machon [Tue, 17 Sep 2024 12:45:41 +0000 (14:45 +0200)]
pinctrl: ocelot: add support for lan969x SoC pinctrl
This adds support for lan969x SoC pinctrl, reusing the existing ocelot
driver. There are 66 General Purpose I/O pins that are individually
configurable to multiple interfaces.
Esben Haabendal [Mon, 6 May 2024 10:23:54 +0000 (12:23 +0200)]
pinctrl: freescale: Use CONFIG_SOC_IMXRT to guard i.MX RT1xxx drivers
This aligns with the use of SOC_IMX* as dependencies for all the other
mach-imx pinctrl drivers. Enabling i.MX RT pinctrl drivers for a kernel
with out i.MX RT SOC support is pointless.
Esben Haabendal [Mon, 6 May 2024 10:23:53 +0000 (12:23 +0200)]
ARM: imx: Allow user to disable pinctrl
Making pinctrl drivers and subsequently the pinctrl framework
user-controllable, allows building a kernel without this.
While in many (most) cases, this could make the system unbootable, it
does allow building smaller kernels for those situations where picntrl
is not needed.
One such situation is when building a kernel for NXP LS1021A systems,
which does not have run-time controllable pinctrl, so pinctrl framework
and drivers are 100% dead-weight.
Nikunj Kela [Thu, 5 Sep 2024 20:02:18 +0000 (13:02 -0700)]
dt-bindings: pinctrl: Add SA8255p TLMM
Add compatible for TLMM block representing support on SA8255p.
SA8255p uses the same TLMM block as SA8775p however the ownership
of pins are split between Firmware VM and Linux VM on SA8255p. For
example, pins used by UART are owned and configured by Firmware VM
while pins used by ethernet are owned and configured by Linux VM.
Therefore, adding a sa8255p specific compatible to mark the difference.
pinctrl: pinctrl-zynqmp: Add support for Versal platform
Add Pinctrl support for Xilinx Versal platform.
Driver checks for firmware support to retrieve the Pin information, if it
is supported then proceed further otherwise it returns error saying
operation not supported. Latest Xilinx Platform Management Firmware must
be used to make use of the Pinctrl driver for Versal platform.
GPIOs showed up as unclaimed in debugfs, so they could be muxed to
something else even though they were in use. Mark GPIOs as claimed when
in use to avoid that.
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Chao Gao <chao.gao@intel.com> Cc: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Merge tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
projects / thirdparty / linux.git / log
