Peter Zijlstra [Wed, 9 Oct 2024 23:53:34 +0000 (16:53 -0700)]
locking/mutex: Remove wakeups from under mutex::wait_lock
In preparation to nest mutex::wait_lock under rq::lock we need
to remove wakeups from under it.
Do this by utilizing wake_qs to defer the wakeup until after the
lock is dropped.
[Heavily changed after 55f036ca7e74 ("locking: WW mutex cleanup") and 08295b3b5bee ("locking: Implement an algorithm choice for Wound-Wait
mutexes")]
[jstultz: rebased to mainline, added extra wake_up_q & init
to avoid hangs, similar to Connor's rework of this patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Metin Kaya <metin.kaya@arm.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Tested-by: Metin Kaya <metin.kaya@arm.com> Link: https://lore.kernel.org/r/20241009235352.1614323-2-jstultz@google.com
sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
introduced a per-mm/cpu current concurrency id (mm_cid), which keeps
a reference to the concurrency id allocated for each CPU. This reference
expires shortly after a 100ms delay.
These per-CPU references keep the per-mm-cid data cache-local in
situations where threads are running at least once on each CPU within
each 100ms window, thus keeping the per-cpu reference alive.
However, intermittent workloads behaving in bursts spaced by more than
100ms on each CPU exhibit bad cache locality and degraded performance
compared to purely per-cpu data indexing, because concurrency IDs are
allocated over various CPUs and cores, therefore losing cache locality
of the associated data.
Introduce the following changes to improve per-mm-cid cache locality:
- Add a "recent_cid" field to the per-mm/cpu mm_cid structure to keep
track of which mm_cid value was last used, and use it as a hint to
attempt re-allocating the same concurrency ID the next time this
mm/cpu needs to allocate a concurrency ID,
- Add a per-mm CPUs allowed mask, which keeps track of the union of
CPUs allowed for all threads belonging to this mm. This cpumask is
only set during the lifetime of the mm, never cleared, so it
represents the union of all the CPUs allowed since the beginning of
the mm lifetime (note that the mm_cpumask() is really arch-specific
and tailored to the TLB flush needs, and is thus _not_ a viable
approach for this),
- Add a per-mm nr_cpus_allowed to keep track of the weight of the
per-mm CPUs allowed mask (for fast access),
- Add a per-mm max_nr_cid to keep track of the highest number of
concurrency IDs allocated for the mm. This is used for expanding the
concurrency ID allocation within the upper bound defined by:
min(mm->nr_cpus_allowed, mm->mm_users)
When the next unused CID value reaches this threshold, stop trying
to expand the cid allocation and use the first available cid value
instead.
Spreading allocation to use all the cid values within the range
[ 0, min(mm->nr_cpus_allowed, mm->mm_users) - 1 ]
improves cache locality while preserving mm_cid compactness within the
expected user limits,
- In __mm_cid_try_get, only return cid values within the range
[ 0, mm->nr_cpus_allowed ] rather than [ 0, nr_cpu_ids ]. This
prevents allocating cids above the number of allowed cpus in
rare scenarios where cid allocation races with a concurrent
remote-clear of the per-mm/cpu cid. This improvement is made
possible by the addition of the per-mm CPUs allowed mask,
- In sched_mm_cid_migrate_to, use mm->nr_cpus_allowed rather than
t->nr_cpus_allowed. This criterion was really meant to compare
the number of mm->mm_users to the number of CPUs allowed for the
entire mm. Therefore, the prior comparison worked fine when all
threads shared the same CPUs allowed mask, but not so much in
scenarios where those threads have different masks (e.g. each
thread pinned to a single CPU). This improvement is made
possible by the addition of the per-mm CPUs allowed mask.
* Benchmarks
Each thread increments 16kB worth of 8-bit integers in bursts, with
a configurable delay between each thread's execution. Each thread run
one after the other (no threads run concurrently). The order of
thread execution in the sequence is random. The thread execution
sequence begins again after all threads have executed. The 16kB areas
are allocated with rseq_mempool and indexed by either cpu_id, mm_cid
(not cache-local), or cache-local mm_cid. Each thread is pinned to its
own core.
Testing configurations:
8-core/1-L3: Use 8 cores within a single L3
24-core/24-L3: Use 24 cores, 1 core per L3
192-core/24-L3: Use 192 cores (all cores in the system)
384-thread/24-L3: Use 384 HW threads (all HW threads in the system)
Intermittent workload delays between threads: 200ms, 10ms.
Zhongqiu Han [Wed, 9 Oct 2024 09:37:45 +0000 (17:37 +0800)]
sched: idle: Optimize the generic idle loop by removing needless memory barrier
The memory barrier rmb() in generic idle loop do_idle() function is not
needed, it doesn't order any load instruction, just remove it as needless
rmb() can cause performance impact.
The rmb() was introduced by the tglx/history.git commit f2f1b44c75c4
("[PATCH] Remove RCU abuse in cpu_idle()") to order the loads between
cpu_idle_map and pm_idle. It pairs with wmb() in function cpu_idle_wait().
And then with the removal of cpu_idle_state in function cpu_idle() and
wmb() in function cpu_idle_wait() in commit 783e391b7b5b ("x86: Simplify
cpu_idle_wait"), rmb() no longer has a reason to exist.
After that, commit d16699123434 ("idle: Implement generic idle function")
implemented a generic idle function cpu_idle_loop() which resembles the
functionality found in arch/. And it retained the rmb() in generic idle
loop in file kernel/cpu/idle.c.
And at last, commit cf37b6b48428 ("sched/idle: Move cpu/idle.c to
sched/idle.c") moved cpu/idle.c to sched/idle.c. And commit c1de45ca831a
("sched/idle: Add support for tasks that inject idle") renamed function
cpu_idle_loop() to do_idle().
Peter Zijlstra [Thu, 10 Oct 2024 09:38:10 +0000 (11:38 +0200)]
sched/fair: Fix external p->on_rq users
Sean noted that ever since commit 152e11f6df29 ("sched/fair: Implement
delayed dequeue") KVM's preemption notifiers have started
mis-classifying preemption vs blocking.
Notably p->on_rq is no longer sufficient to determine if a task is
runnable or blocked -- the aforementioned commit introduces tasks that
remain on the runqueue even through they will not run again, and
should be considered blocked for many cases.
Add the task_is_runnable() helper to classify things and audit all
external users of the p->on_rq state. Also add a few comments.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Reported-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20241010091843.GK33184@noisy.programming.kicks-ass.net
Johannes Weiner [Fri, 11 Oct 2024 08:49:33 +0000 (10:49 +0200)]
sched/psi: Fix mistaken CPU pressure indication after corrupted task state bug
Since sched_delayed tasks remain queued even after blocking, the load
balancer can migrate them between runqueues while PSI considers them
to be asleep. As a result, it misreads the migration requeue followed
by a wakeup as a double queue:
First, call psi_enqueue() after p->sched_class->enqueue_task(). A
wakeup will clear p->se.sched_delayed while a migration will not, so
psi can use that flag to tell them apart.
Then teach psi to migrate any "sleep" state when delayed-dequeue tasks
are being migrated.
Delayed-dequeue tasks can be revived by ttwu_runnable(), which will
call down with a new ENQUEUE_DELAYED. Instead of further complicating
the wakeup conditional in enqueue_task(), identify migration contexts
instead and default to wakeup handling for all other cases.
It's not just the warning in dmesg, the task state corruption causes a
permanent CPU pressure indication, which messes with workload/machine
health monitoring.
Debugged-by-and-original-fix-by: K Prateek Nayak <kprateek.nayak@amd.com> Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Closes: https://lore.kernel.org/lkml/20240830123458.3557-1-spasswolf@web.de/ Closes: https://lore.kernel.org/all/cd67fbcd-d659-4822-bb90-7e8fbb40a856@molgen.mpg.de/ Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lkml.kernel.org/r/20241010193712.GC181795@cmpxchg.org
Peter Zijlstra [Thu, 10 Oct 2024 08:28:36 +0000 (08:28 +0000)]
sched/core: Dequeue PSI signals for blocked tasks that are delayed
psi_dequeue() in for blocked task expects psi_sched_switch() to clear
the TSK_.*RUNNING PSI flags and set the TSK_IOWAIT flags however
psi_sched_switch() uses "!task_on_rq_queued(prev)" to detect if the task
is blocked or still runnable which is no longer true with DELAY_DEQUEUE
since a blocking task can be left queued on the runqueue.
Peter Zijlstra [Thu, 10 Oct 2024 09:54:38 +0000 (11:54 +0200)]
sched: Fix delayed_dequeue vs switched_from_fair()
Commit 2e0199df252a ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
and its follow up fixes try to deal with a rather unfortunate
situation where is task is enqueued in a new class, even though it
shouldn't have been. Mostly because the existing ->switched_to/from()
hooks are in the wrong place for this case.
This all led to Paul being able to trigger failures at something like
once per 10k CPU hours of RCU torture.
For now, do the ugly thing and move the code to the right place by
ignoring the switch hooks.
Note: Clean up the whole sched_class::switch*_{to,from}() thing.
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Phil Auld [Fri, 4 Oct 2024 12:37:29 +0000 (08:37 -0400)]
sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()
The deadline server code moved one of the start_hrtick_dl() calls
but dropped the dl specific hrtick_enabled check. This causes hrticks
to get armed even when sched_feat(HRTICK_DL) is false. Fix it.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers") Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lore.kernel.org/r/20241004123729.460668-1-pauld@redhat.com
Ingo Molnar [Wed, 9 Oct 2024 08:00:09 +0000 (10:00 +0200)]
fs/bcachefs: Fix __wait_on_freeing_inode() definition of waitqueue entry
The following recent commit made DEFINE_WAIT_BIT() type requirements stricter:
2382d68d7d43 ("sched: change wake_up_bit() and related function to expect unsigned long *")
.. which results in a build failure:
> fs/bcachefs/fs.c: In function '__wait_on_freeing_inode':
> fs/bcachefs/fs.c:281:31: error: initialization of 'long unsigned int *' from incompatible pointer type 'u32 *' {aka 'unsigned int *'} [-Wincompatible-pointer-types]
> 281 | DEFINE_WAIT_BIT(wait, &inode->v.i_state, __I_NEW);
Since this code relies on the waitqueue initialization within
inode_bit_waitqueue() anyway, the DEFINE_WAIT_BIT() initialization
is unnecessary - we can just declare a waitqueue entry.
Huang Shijie [Tue, 1 Oct 2024 06:54:51 +0000 (14:54 +0800)]
sched/fair: remove the DOUBLE_TICK feature
The patch "5e963f2bd46 sched/fair: Commit to EEVDF"
removed the code following the DOUBLE_TICK:
-
- if (!sched_feat(EEVDF) && cfs_rq->nr_running > 1)
- check_preempt_tick(cfs_rq, curr);
The DOUBLE_TICK feature becomes dead code now, so remove it.
David Disseldorp [Mon, 30 Sep 2024 05:09:46 +0000 (05:09 +0000)]
sched: remove unused __HAVE_THREAD_FUNCTIONS hook support
__HAVE_THREAD_FUNCTIONS could be defined by architectures wishing to
provide their own task_thread_info(), task_stack_page(),
setup_thread_stack() and end_of_stack() hooks.
Commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
removed the last upstream consumer of __HAVE_THREAD_FUNCTIONS, so change
the remaining !CONFIG_THREAD_INFO_IN_TASK && !__HAVE_THREAD_FUNCTIONS
conditionals to only check for the former case.
The waiting in softirq.c is always waiting for a bit to be cleared.
This makes the bit wait functions seem more suitable.
By switching over we can rid of all explicit barriers. We also use
wait_on_bit_lock() to avoid an explicit loop.
sched: Add wait/wake interface for variable updated under a lock.
Sometimes we need to wait for a condition to be true which must be
testing while holding a lock. Correspondingly the condition is made
true while holding the lock and the wake up is sent under the lock.
This patch provides wake and wait interfaces which can be used for this
situation when the lock is a mutex or a spinlock, or any other lock for
which there are foo_lock() and foo_unlock() functions.
sched: Add test_and_clear_wake_up_bit() and atomic_dec_and_wake_up()
There are common patterns in the kernel of using test_and_clear_bit()
before wake_up_bit(), and atomic_dec_and_test() before wake_up_var().
These combinations don't need extra barriers but sometimes include them
unnecessarily.
To help avoid the unnecessary barriers and to help discourage the
general use of wake_up_bit/var (which is a fragile interface) introduce
two combined functions which implement these patterns.
Also add store_release_wake_up() which supports the task of simply
setting a non-atomic variable and sending a wakeup. This pattern
requires barriers which are often omitted.
sched: Document wait_var_event() family of functions and wake_up_var()
wake_up_var(), wait_var_event() and related interfaces are not
documented but have important ordering requirements. This patch adds
documentation and makes these requirements explicit.
The return values for those wait_var_event_* functions which return a
value are documented. Note that these are, perhaps surprisingly,
sometimes different from comparable wait_on_bit() functions.
sched: Improve documentation for wake_up_bit/wait_on_bit family of functions
This patch revises the documention for wake_up_bit(),
clear_and_wake_up_bit(), and all the wait_on_bit() family of functions.
The new documentation places less emphasis on the pool of waitqueues
used (an implementation detail) and focuses instead on details of how
the functions behave.
The barriers included in the wait functions and clear_and_wake_up_bit()
and those required for wake_up_bit() are spelled out more clearly.
The error statuses returned are given explicitly.
The fact that the wait_on_bit_lock() function sets the bit is made more
obvious.
sched: change wake_up_bit() and related function to expect unsigned long *
wake_up_bit() currently allows a "void *". While this isn't strictly a
problem as the address is never dereferenced, it is inconsistent with
the corresponding wait_on_bit() which requires "unsigned long *" and
does dereference the pointer.
Any code that needs to wait for a change in something other than an
unsigned long would be better served by wake_up_var()/wait_var_event().
This patch changes all related "void *" to "unsigned long *".
Linus Torvalds [Sun, 6 Oct 2024 18:34:55 +0000 (11:34 -0700)]
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Linus Torvalds [Sun, 6 Oct 2024 18:11:01 +0000 (11:11 -0700)]
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Linus Torvalds [Sun, 6 Oct 2024 17:53:28 +0000 (10:53 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Aaron Thompson [Fri, 4 Oct 2024 07:52:45 +0000 (07:52 +0000)]
kbuild: deb-pkg: Remove blank first line from maint scripts
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by: Aaron Thompson <dev@aaront.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Hans de Goede [Sat, 5 Oct 2024 13:05:45 +0000 (15:05 +0200)]
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
Armin Wolf [Sat, 5 Oct 2024 21:38:24 +0000 (23:38 +0200)]
platform/x86: wmi: Update WMI driver API documentation
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 3 Oct 2024 20:26:13 +0000 (22:26 +0200)]
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/ Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
Armin Wolf [Tue, 1 Oct 2024 21:28:35 +0000 (23:28 +0200)]
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org> Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jithu Joseph [Tue, 1 Oct 2024 17:08:08 +0000 (10:08 -0700)]
MAINTAINERS: Update Intel In Field Scan(IFS) entry
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Paolo Bonzini [Tue, 1 Oct 2024 14:34:58 +0000 (10:34 -0400)]
x86/reboot: emergency callbacks are now registered by common KVM code
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Oct 2024 14:15:01 +0000 (10:15 -0400)]
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 5 Oct 2024 22:18:04 +0000 (15:18 -0700)]
Merge tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Linus Torvalds [Sat, 5 Oct 2024 17:47:00 +0000 (10:47 -0700)]
Merge tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Linus Torvalds [Sat, 5 Oct 2024 17:31:04 +0000 (10:31 -0700)]
Merge tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
Linus Torvalds [Sat, 5 Oct 2024 17:25:04 +0000 (10:25 -0700)]
Merge tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Linus Torvalds [Sat, 5 Oct 2024 17:19:14 +0000 (10:19 -0700)]
Merge tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Linus Torvalds [Sat, 5 Oct 2024 17:10:45 +0000 (10:10 -0700)]
Merge tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.496451] raw: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.497906] head: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.499379] head: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.500844] head: 0057ffffc0000003ffffea0020a79801ffffea0020a7984800000000ffffffff
[ 19.502316] head: 0000000800000000000000000000000000000000ffffffff0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sat, 5 Oct 2024 00:30:59 +0000 (17:30 -0700)]
Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Kent Overstreet [Tue, 24 Sep 2024 02:06:58 +0000 (22:06 -0400)]
bcachefs: Rework logged op error handling
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 04:00:33 +0000 (00:00 -0400)]
bcachefs: Kill snapshot arg to fsck_write_inode()
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 03:38:37 +0000 (23:38 -0400)]
bcachefs: Check for unlinked, non-empty dirs in check_inode()
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 02:38:04 +0000 (22:38 -0400)]
bcachefs: Check for unlinked inodes with dirents
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Sat, 28 Sep 2024 19:27:37 +0000 (15:27 -0400)]
bcachefs: Check for directories with no backpointers
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 1 Oct 2024 23:08:37 +0000 (19:08 -0400)]
bcachefs: Kill alloc_v4.fragmentation_lru
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 1 Oct 2024 20:40:33 +0000 (16:40 -0400)]
bcachefs: minor lru fsck fixes
check_lru_key() wasn't using write buffer updates for deleting bad lru
entries - dating from before the lru btree used the btree write buffer.
And when possibly flushing the btree write buffer (to make sure we're
seeing a real inconsistency), we need to be using the modern
bch2_btree_write_buffer_maybe_flush().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Sat, 28 Sep 2024 06:44:12 +0000 (02:44 -0400)]
bcachefs: Fix reattach_inode()
Ensure a copy of the lost+found inode exists in the snapshot that we're
reattaching, so that we don't trigger warnings in
lookup_inode_for_snapshot() later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Fri, 4 Oct 2024 23:44:32 +0000 (19:44 -0400)]
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
This fixes two different bugs:
- Looser locking with the rhashtable means we need to recheck if the
inode is still hashed after prepare_to_wait(), and add a corresponding
wakeup after removing from the hash table.
- da18ecbf0fb6 ("fs: add i_state helpers") changed the bit waitqueues
used for inodes, and bcachefs wasn't updated and thus broke; this
updates bcachefs to the new helper.
Fixes: 112d21fd1a12 ("bcachefs: switch to rhashtable for vfs inodes hash") Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Baokun Li [Fri, 27 Sep 2024 13:33:29 +0000 (21:33 +0800)]
ext4: fix off by one issue in alloc_flex_gd()
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Linus Torvalds [Fri, 4 Oct 2024 19:20:09 +0000 (12:20 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"A couple of build/config issues and expanding the speculative SSBS
workaround to more CPUs:
- Expand the speculative SSBS workaround to cover Cortex-A715,
Neoverse-N3 and Microsoft Azure Cobalt 100
- Force position-independent veneers - in some kernel configurations,
the LLD linker generates position-dependent veneers for otherwise
position-independent code, resulting in early boot-time failures
- Fix Kconfig selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS so that it
is not enabled when not supported by the combination of clang and
GNU ld"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Subscribe Microsoft Azure Cobalt 100 to erratum 3194386
arm64: fix selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS
arm64: errata: Expand speculative SSBS workaround once more
arm64: cputype: Add Neoverse-N3 definitions
arm64: Force position-independent veneers
Linus Torvalds [Fri, 4 Oct 2024 19:16:51 +0000 (12:16 -0700)]
Merge tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- PERF_TYPE_BREAKPOINT now returns -EOPNOTSUPP instead of -ENOENT,
which aligns to other ports and is a saner value
- The KASAN-related stack size increasing logic has been moved to a C
header, to avoid dependency issues
* tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix kernel stack size when KASAN is enabled
drivers/perf: riscv: Align errno for unsupported perf event
Linus Torvalds [Fri, 4 Oct 2024 19:11:06 +0000 (12:11 -0700)]
Merge tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
Linus Torvalds [Fri, 4 Oct 2024 19:05:39 +0000 (12:05 -0700)]
Merge tag 'slab-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
"Fixes for issues introduced in this merge window: kobject memory leak,
unsupressed warning and possible lockup in new slub_kunit tests,
misleading code in kvfree_rcu_queue_batch()"
* tag 'slab-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slub/kunit: skip test_kfree_rcu when the slub kunit test is built-in
mm, slab: suppress warnings in test_leak_destroy kunit test
rcu/kvfree: Refactor kvfree_rcu_queue_batch()
mm, slab: fix use of SLAB_SUPPORTS_SYSFS in kmem_cache_release()
Linus Torvalds [Fri, 4 Oct 2024 18:59:36 +0000 (11:59 -0700)]
Merge tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König)"
* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid a bad reference count on CPU node
cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
Linus Torvalds [Fri, 4 Oct 2024 18:29:46 +0000 (11:29 -0700)]
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Linus Torvalds [Fri, 4 Oct 2024 18:25:14 +0000 (11:25 -0700)]
Merge tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, xe and amdgpu lead the way, with panthor, and few core
components getting various fixes. Nothing seems too out of the
ordinary.
atomic:
- Use correct type when reading damage rectangles
display:
- Fix kernel docs
dp-mst:
- Fix DSC decompression detection
hdmi:
- Fix infoframe size
sched:
- Update maintainers
- Fix race condition whne queueing up jobs
- Fix locking in drm_sched_entity_modify_sched()
- Fix pointer deref if entity queue changes
sysfb:
- Disable sysfb if framebuffer parent device is unknown
i915:
- One fix for bitwise and logical "and" mixup in PM code
xe:
- Restore pci state on resume
- Fix locking on submission, queue and vm
- Fix UAF on queue destruction
- Fix resource release on freq init error path
- Use rw_semaphore to reduce contention on ASID->VM lookup
- Fix steering for media on Xe2_HPM
- Tuning updates to Xe2
- Resume TDR after GT reset to prevent jobs running forever
- Move id allocation to avoid userspace using a guessed number to
trigger UAF
- Fix OA stream close preventing pbatch buffers to complete
- Fix NPD when migrating memory on LNL
- Fix memory leak when aborting binds
panthor:
- Fix locking
- Set FOP_UNSIGNED_OFFSET in fops instance
- Acquire lock in panthor_vm_prepare_map_op_ctx()
- Avoid uninitialized variable in tick_ctx_cleanup()
- Do not block scheduler queue if work is pending
- Do not add write fences to the shared BOs
vbox:
- Fix VLA handling"
* tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Fix memory leak when aborting binds
drm/xe: Prevent null pointer access in xe_migrate_copy
drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close
drm/xe/queue: move xa_alloc to prevent UAF
drm/xe/vm: move xa_alloc to prevent UAF
drm/xe: Clean up VM / exec queue file lock usage.
drm/xe: Resume TDR after GT reset
drm/xe/xe2: Add performance tuning for L3 cache flushing
drm/xe/xe2: Extend performance tuning to media GT
drm/xe/mcr: Use Xe2_LPM steering tables for Xe2_HPM
drm/xe: Use helper for ASID -> VM in GPU faults and access counters
drm/xe: Convert to USM lock to rwsem
drm/xe: use devm_add_action_or_reset() helper
drm/xe: fix UAF around queue destruction
drm/xe/guc_submit: add missing locking in wedged_fini
drm/xe: Restore pci state upon resume
drm/amd/display: Fix system hang while resume with TBT monitor
drm/amd/display: Enable idle workqueue for more IPS modes
drm/amd/display: Add HDR workaround for specific eDP
drm/amd/display: avoid set dispclk to 0
...
Linus Torvalds [Fri, 4 Oct 2024 17:43:44 +0000 (10:43 -0700)]
Merge tag 'block-6.12-20241004' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix another use-after-free in aoe
- Fixup wrong nested non-saving irq disable/restore in blk-iocost
- Fixup a kerneldoc complaint introduced by a merge window patch
* tag 'block-6.12-20241004' of git://git.kernel.dk/linux:
aoe: fix the potential use-after-free problem in more places
blk_iocost: remove some duplicate irq disable/enables
block: fix blk_rq_map_integrity_sg kernel-doc
Linus Torvalds [Fri, 4 Oct 2024 17:39:36 +0000 (10:39 -0700)]
Merge tag 'io_uring-6.12-20241004' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix an error path memory leak, if one part fails to allocate.
Obviously not something that'll generally hit without error
injection.
- Fix an io_req_flags_t cast to make sparse happier.
- Improve the recv multishot termination. Not a bug now, but could be
one in the future. This makes it do the same thing that recvmsg does
in terms of when to terminate a request or not.
* tag 'io_uring-6.12-20241004' of git://git.kernel.dk/linux:
io_uring/net: harden multishot termination case for recv
io_uring: fix casts to io_req_flags_t
io_uring: fix memory leak when cache init fail
Linus Torvalds [Fri, 4 Oct 2024 17:31:59 +0000 (10:31 -0700)]
Merge tag 'fsnotify_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Fixes for an inotify deadlock and a data race in fsnotify"
* tag 'fsnotify_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Fix possible deadlock in fsnotify_destroy_mark
fsnotify: Avoid data race between fsnotify_recalc_mask() and fsnotify_object_watched()
Linus Torvalds [Fri, 4 Oct 2024 17:24:06 +0000 (10:24 -0700)]
Merge tag 'fs_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes from Jan Kara:
"A couple of UDF error handling fixes for issues spotted by syzbot"
* tag 'fs_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix uninit-value use in udf_get_fileshortad
udf: refactor inode_bmap() to handle error
udf: refactor udf_next_aext() to handle error
udf: refactor udf_current_aext() to handle error
Linus Torvalds [Fri, 4 Oct 2024 17:10:23 +0000 (10:10 -0700)]
Merge tag 'ceph-for-6.12-rc2' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix from Patrick for a variety of CephFS lockup scenarios caused by
a regression in cap handling which sneaked in through the netfs helper
library in 5.18 (marked for stable) and an unrelated one-line cleanup"
* tag 'ceph-for-6.12-rc2' of https://github.com/ceph/ceph-client:
ceph: fix cap ref leak via netfs init_request
ceph: use struct_size() helper in __ceph_pool_perm_get()
Linus Torvalds [Fri, 4 Oct 2024 17:05:13 +0000 (10:05 -0700)]
Merge tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in incremental send, fix invalid clone operation for file that got
its size decreased
- fix __counted_by() annotation of send path cache entries, we do not
store the terminating NUL
- fix a longstanding bug in relocation (and quite hard to hit by
chance), drop back reference cache that can get out of sync after
transaction commit
- wait for fixup worker kthread before finishing umount
- add missing raid-stripe-tree extent for NOCOW files, zoned mode
cannot have NOCOW files but RST is meant to be a standalone feature
- handle transaction start error during relocation, avoid potential
NULL pointer dereference of relocation control structure (reported by
syzbot)
- disable module-wide rate limiting of debug level messages
- minor fix to tracepoint definition (reported by checkpatch.pl)
* tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: disable rate limiting when debug enabled
btrfs: wait for fixup workers before stopping cleaner kthread during umount
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
btrfs: send: fix invalid clone operation for file that got its size decreased
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
btrfs: drop the backref cache during relocation if we commit
btrfs: also add stripe entries for NOCOW writes
btrfs: send: fix buffer overflow detection when copying path to cache entry
Linus Torvalds [Fri, 4 Oct 2024 16:56:05 +0000 (09:56 -0700)]
Merge tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- statfs fix (e.g. when limited access to root directory of share)
- special file handling fixes: fix packet validation to avoid buffer
overflow for reparse points, fixes for symlink path parsing (one for
reparse points, and one for SFU use case), and fix for cleanup after
failed SET_REPARSE operation.
- fix for SMB2.1 signing bug introduced by recent patch to NFS symlink
path, and NFS reparse point validation
- comment cleanup
* tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not convert delimiter when parsing NFS-style symlinks
cifs: Validate content of NFS reparse point buffer
cifs: Fix buffer overflow when parsing NFS reparse points
smb: client: Correct typos in multiple comments across various files
smb: client: use actual path when queryfs
cifs: Remove intermediate object of failed create reparse call
Revert "smb: client: make SHA-512 TFM ephemeral"
smb: Update comments about some reparse point tags
cifs: Check for UTF-16 null codepoint in SFU symlink target location
Paul Moore [Thu, 3 Oct 2024 20:43:39 +0000 (16:43 -0400)]
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
This patch reverts two TOMOYO patches that were merged into Linus' tree
during the v6.12 merge window:
8b985bbfabbe ("tomoyo: allow building as a loadable LSM module") 268225a1de1a ("tomoyo: preparation step for building as a loadable LSM module")
Together these two patches introduced the CONFIG_SECURITY_TOMOYO_LKM
Kconfig build option which enabled a TOMOYO specific dynamic LSM loading
mechanism (see the original commits for more details). Unfortunately,
this approach was widely rejected by the LSM community as well as some
members of the general kernel community. Objections included concerns
over setting a bad precedent regarding individual LSMs managing their
LSM callback registrations as well as general kernel symbol exporting
practices. With little to no support for the CONFIG_SECURITY_TOMOYO_LKM
approach outside of Tetsuo, and multiple objections, we need to revert
these changes.
arm64: Subscribe Microsoft Azure Cobalt 100 to erratum 3194386
Add the Microsoft Azure Cobalt 100 CPU to the list of CPUs suffering
from erratum 3194386 added in commit 75b3c43eab59 ("arm64: errata:
Expand speculative SSBS workaround")
CC: Mark Rutland <mark.rutland@arm.com> CC: James More <james.morse@arm.com> CC: Will Deacon <will@kernel.org> CC: stable@vger.kernel.org # 6.6+ Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20241003225239.321774-1-eahariha@linux.microsoft.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Takashi Iwai [Fri, 4 Oct 2024 08:25:58 +0000 (10:25 +0200)]
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
We received a regression report for System76 Pangolin (pang14) due to
the recent fix for Tuxedo Sirius devices to support the top speaker.
The reason was the conflicting PCI SSID, as often seen.
As a workaround, now the codec SSID is checked and the quirk is
applied conditionally only to Sirius devices.
Fixes: 4178d78cd7a8 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices") Reported-by: Christian Heusel <christian@heusel.eu> Reported-by: Jerry <jerryluo225@gmail.com> Closes: https://lore.kernel.org/c930b6a6-64e5-498f-b65a-1cd5e0a1d733@heusel.eu Link: https://patch.msgid.link/20241004082602.29016-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 4 Oct 2024 00:03:18 +0000 (17:03 -0700)]
Merge tag 'pull-fixes.ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs fix from Al Viro:
"Fix ufs_rename() braino introduced this cycle.
The 'folio_release_kmap(dir_folio, new_dir)' in ufs_rename() part of
folio conversion should've been getting a pointer to ufs directory
entry within the page, rather than a pointer to directory struct
inode..."
* tag 'pull-fixes.ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs_rename(): fix bogus argument of folio_release_kmap()
Johannes Weiner [Thu, 3 Oct 2024 11:29:05 +0000 (07:29 -0400)]
sched: psi: fix bogus pressure spikes from aggregation race
Brandon reports sporadic, non-sensical spikes in cumulative pressure
time (total=) when reading cpu.pressure at a high rate. This is due to
a race condition between reader aggregation and tasks changing states.
While it affects all states and all resources captured by PSI, in
practice it most likely triggers with CPU pressure, since scheduling
events are so frequent compared to other resource events.
The race context is the live snooping of ongoing stalls during a
pressure read. The read aggregates per-cpu records for stalls that
have concluded, but will also incorporate ad-hoc the duration of any
active state that hasn't been recorded yet. This is important to get
timely measurements of ongoing stalls. Those ad-hoc samples are
calculated on-the-fly up to the current time on that CPU; since the
stall hasn't concluded, it's expected that this is the minimum amount
of stall time that will enter the per-cpu records once it does.
The problem is that the path that concludes the state uses a CPU clock
read that is not synchronized against aggregators; the clock is read
outside of the seqlock protection. This allows aggregators to race and
snoop a stall with a longer duration than will actually be recorded.
With the recorded stall time being less than the last snapshot
remembered by the aggregator, a subsequent sample will underflow and
observe a bogus delta value, resulting in an erratic jump in pressure.
Fix this by moving the clock read of the state change into the seqlock
protection. This ensures no aggregation can snoop live stalls past the
time that's recorded when the state concludes.
Paolo Bonzini [Fri, 27 Sep 2024 10:25:35 +0000 (06:25 -0400)]
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
As was tried in commit 4e103134b862 ("KVM: x86/mmu: Zap only the relevant
pages when removing a memslot"), all shadow pages, i.e. non-leaf SPTEs,
need to be zapped. All of the accounting for a shadow page is tied to the
memslot, i.e. the shadow page holds a reference to the memslot, for all
intents and purposes. Deleting the memslot without removing all relevant
shadow pages, as is done when KVM_X86_QUIRK_SLOT_ZAP_ALL is disabled,
results in NULL pointer derefs when tearing down the VM.
Reintroduce from that commit the code that walks the whole memslot when
there are active shadow MMU pages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / thirdparty / linux.git / log
