Michal Wajdeczko [Thu, 12 Jun 2025 22:09:36 +0000 (00:09 +0200)]
drm/xe: Process deferred GGTT node removals on device unwind
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
Vinay Belgaumkar [Wed, 18 Jun 2025 18:50:01 +0000 (11:50 -0700)]
drm/xe/bmg: Update Wa_22019338487
Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e725 ("drm/xe/bmg: Apply Wa_22019338487") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Lucas De Marchi [Wed, 18 Jun 2025 18:50:00 +0000 (11:50 -0700)]
drm/xe: Split xe_device_td_flush()
xe_device_td_flush() has 2 possible implementations: an entire L2 flush
or a transient flush, depending on WA 16023588340. Make this clear by
splitting the function so it calls each of them.
Lucas De Marchi [Wed, 18 Jun 2025 18:49:59 +0000 (11:49 -0700)]
drm/xe/xe_guc_pc: Lock once to update stashed frequencies
pc_set_mert_freq_cap() currently lock()/unlock() the mutex multiple times
to stash the current frequencies. It's not a problem since
xe_guc_pc_restore_stashed_freq() is guaranteed to be called only later
in the init sequence. However, now that we have _locked() variants for
this functions, use them and avoid potential issues when called from
other places or using the same pattern.
While at it, prefer and early return for the WA check to reduce
indentation.
Lucas De Marchi [Wed, 18 Jun 2025 18:49:58 +0000 (11:49 -0700)]
drm/xe/guc_pc: Add _locked variant for min/max freq
There are places in which the getters/setters are called one after the
other causing a multiple lock()/unlock(). These are not currently a
problem since they are all happening from the same thread, but there's a
race possibility as calls are added outside of the early init when the
max/min and stashed values need to be correlated.
Reuven Abliyev [Tue, 17 Jun 2025 14:51:58 +0000 (17:51 +0300)]
drm/xe/nvm: add support for non-posted erase
Erase command is slow on discrete graphics storage
and may overshot PCI completion timeout.
BMG introduces the ability to have non-posted erase.
Add driver support for non-posted erase with polling
for erase completion.
Register the on-die nvm device with the mtd subsystem.
Refcount nvm object on _get and _put mtd callbacks.
For erase operation address and size should be 4K aligned.
For write operation address and size has to be 4bytes aligned.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com> CC: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Co-developed-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Tomas Winkler <tomasw@gmail.com> Co-developed-by: Vitaly Lubart <lubvital@gmail.com> Signed-off-by: Vitaly Lubart <lubvital@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250617145159.3803852-5-alexander.usyskin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Dave Airlie [Mon, 23 Jun 2025 00:49:25 +0000 (10:49 +1000)]
Merge tag 'drm-intel-next-2025-06-18' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Dave Airlie [Fri, 20 Jun 2025 01:33:41 +0000 (11:33 +1000)]
Merge tag 'drm-misc-next-2025-06-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
- Add Task Information for the wedge API
Cross-subsystem Changes:
Core Changes:
- Fix warnings related to export.h
- fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures
- fence: Fix UAF issues
- format-helper: Improve tests
Driver Changes:
- ivpu: Add turbo flag, Add Wildcat Lake Support
- rz-du: Improve MIPI-DSI Support
- vmwgfx: fence improvement
Dave Airlie [Thu, 19 Jun 2025 23:07:49 +0000 (09:07 +1000)]
Merge tag 'drm-xe-next-2025-06-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose media OA units (Ashutosh)
Merge:
- Restore GuC submit UAF fix around queue destruction
accidentally removed in a drm-xe-fixes merge (Auld)
Core Changes:
- drm/gpusvm: Introduce devmem_only flag for allocation (Himal)
- drm/gpusvm: Add timeslicing support to GPU SVM (Brost)
Driver Changes:
- Make gem shrinker drm managed (Thomas)
- SRIOV VF Post-migration recovery of GGTT nodes and CTB (Tomasz)
- Some W/A additions and updates (Aradhya, Shekhar, Vinay, Daniele)
- Prefetch Support for svm ranges (Himal, Brost)
- Don't allocate managed BO for each policy change (Michal)
- Simplify and fix diff calculation in GuC submit (Lucas)
- Track FAST_REQ GuC H2Gs to report where errors came from (John)
- SRIOV PF: Don't allow LMEM provisioning if LMTT isn't available (Piotr)
- Check if all domains awake for MOCS dump (Tejas)
- Make creation of SLPC debugfs files conditional (Aradhya)
- Default auto_link_downgrade status to false (Aradhya)
- Use xe_mmio_read32() to read mtcfg register (Shuicheng)
- Updates in PCI ID tables (Atwood, Shekhar)
- SRIOV VF: Fail migration recovery if fixups needed but not supported (Tomasz)
- Add missing documentation around freq and RPa (Rodrigo)
- Some other SVM related fixes (Himal, Auld, Brost, Maarten)
- Allow to trigger GT resets using debugfs writes (Michal)
- Optimise CCS case for WB pages (Auld)
- Create LRC BO without VM (Niranjana)
- Initialize MOCS index early (Bala)
- HWMON fixes for BMG (Karthik, Lucas)
- Drop redundant conversion to bool (Raag)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Auld)
- Small fixes and cleanups for PXP (Daniele)
- Convert some print messages to GT-oriented ones (Michal)
- Resend potentially lost GuC H2G MMIO request (Michal)
- Add configfs to load with fewer engines (Lucas)
- Remove unmatched xe_vm_unlock from __xe_exec_queue_init (Maciej)
- SRIOV VF: Small updates around GGTT handling (Michal)
- Make VMA tile_present, tile_invalidated access rules clear (Brost)
- Xe3 Tuning: Disable NULL query for Anyhit Shader (Nitin)
- Fixes for VF GuC version (Daniele)
- Don't store the xe device pointer inside xe_ttm_tt (Dave)
- Small improvements in topology code (Michal)
- Stop relying on GGTT internals (Maarten)
- GSM size should be constant on most platforms (Roper)
- Reorder 'Get pages failed' message (Brost)
- WA BB related fixes and improvements (Lucas, Brost)
- Fix early wedge on GuC load failure (Daniele)
- Add helper function to inject fault into ct_dead_capture (Satyanarayana)
- Determine ATS / PTA programming during early sw init (Roper)
- Consolidate PAT programming logic for pre-Xe2 and post-Xe2 (Roper)
- Fix kconfig prompt (Lucas)
- Convert xe_pci tests to parametrized tests (Michal)
- Do not kill VM in PT code on -ENODATA (Brost)
- Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset (Brost)
- Enable media OA (Ashutosh)
- GuC log level tuning (Lucas)
- Add xe_vm_has_valid_gpu_mapping helper (Brost)
- Opportunistically skip TLB invalidaion on unbind (Brost)
Matt Roper [Fri, 13 Jun 2025 19:31:43 +0000 (01:01 +0530)]
drm/xe: Add Wildcat Lake device IDs to PTL list
Introduce wildcat lake device Id.
Wildcat Lake uses slightly different graphics and media IP versions
than Panther Lake, but can still be treated as PTL for general driver
flows.
Karthik Poosa [Tue, 17 Jun 2025 12:00:30 +0000 (17:30 +0530)]
drm/xe/hwmon: Fix xe_hwmon_power_max_write
Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 7596d839f6228 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/format-helper: Move drm_fb_build_fourcc_list() to sysfb helpers
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
drm/tests: Test drm_fb_build_fourcc_list() in separate test suite
Only sysfb drivers use drm_fb_build_fourcc_list(). The helper will
be moved from format helpers to sysfb helpers. Moving the related
tests to their own test suite.
v3:
- rename tests according to filename (José)
v2:
- rename filename to match tested code (Maxime)
drm/tests: Do not use drm_fb_blit() in format-helper tests
Export additional helpers from the format-helper library and open-code
drm_fb_blit() in tests. Prepares for the removal of drm_fb_blit(). Only
sysfb drivers use drm_fb_blit(). The function will soon be removed from
format helpers and be refactored within sysfb helpers.
Ian Forbes [Tue, 29 Apr 2025 20:34:27 +0000 (15:34 -0500)]
drm/vmwgfx: Fix Host-Backed userspace on Guest-Backed kernel
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com
Ian Forbes [Fri, 30 May 2025 18:35:09 +0000 (13:35 -0500)]
drm/vmwgfx: Implement dma_fence_ops properly
vmwgfx's fencing predates dma_fence and as a result dma_fence_ops was never
properly implemented, especially with respect to enabling signaling.
Because of this dma_fence callbacks don't work properly. This change
implements enable_signaling properly so that dma_fence callbacks now
work as expected.
It also removes vmwgfx's custom implementation of fence callbacks
and removes vmwgfx's custom dma_fence_ops::wait function which is no
longer necessary now that enable_signaling works.
Ian Forbes [Fri, 30 May 2025 18:35:08 +0000 (13:35 -0500)]
drm/vmwgfx: Update last_read_seqno under the fence lock
There was a possible race in vmw_update_seqno. Because of this race it
was possible for last_read_seqno to go backwards. Remove this function
and replace it with vmw_update_fences which now sets and returns the
last_read_seqno while holding the fence lock. This serialization via the
fence lock ensures that last_read_seqno is monotonic again.
Matthew Brost [Mon, 16 Jun 2025 06:30:24 +0000 (23:30 -0700)]
drm/xe: Opportunistically skip TLB invalidaion on unbind
If a range or VMA is invalidated and scratch page is disabled, there
is no reason to issue a TLB invalidation on unbind, skip TLB
innvalidation is this condition is true. This is an opportunistic check
as it is done without the notifier lock, thus it possible for the range
to be invalidated after this check is performed.
This should improve performance of the SVM garbage collector, for
example, xe_exec_system_allocator --r many-stride-new-prefetch, went
~20s to ~9.5s on a BMG.
v2:
- Use helper for valid check (Thomas)
v3:
- Avoid skipping TLB invalidation if PTEs are removed at a higher
level than the range
- Never skip TLB invalidations for VMA
- Drop Himal's RB
Dave Airlie [Tue, 17 Jun 2025 22:09:27 +0000 (08:09 +1000)]
Merge tag 'drm-misc-next-2025-06-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.17:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic-helpers: Tune the enable / disable sequence
- bridge: Add destroy hook
- color management: Add helpers for hardware gamma LUT handling
- HDMI: Add CEC handling, YUV420 output support
- sched: tracing improvements
Driver Changes:
- hyperv: Move out of simple-kms, drm_panic support
- i915: drm_panel_follower support
- imx: Add IMX8qxq Display Controller Support
- lima: Add Rockchip RK3528 GPU Support
- nouveau: fence handling cleanup
- panfrost: Add BO labeling, 64-bit registers access
- qaic: Add RAS Support
- rz-du: Add RZ/V2H(P) Support, MIPI-DSI DCS Support
- sun4i: Add H616 Support
- tidss: Add TI AM62L Support
- vkms: YUV and R* formats support
- bridges:
- Switched to reference counted drm_bridge allocations
- panels:
- Switched to reference counted drm_panel allocations
- Add support for fwnode-based panel lookup
- himax-hx8394: Support for Huiling hl055fhv028c
- ilitek-ili9881c: Support for 7" Raspberry Pi 720x1280
- panel-edp: Support for KDC KD116N3730A05, N160JCE-ELL CMN,
- panel-simple: Support for AUO P238HAN01
- st7701: Support for Winstar wf40eswaa6mnn0
- visionox-rm69299: Support for rm69299-shift
- New panels: Renesas R61307, Renesas R69328
Note that this is a GSC WA and we don't load the GSC on BMG, so
extending the WA to BMG won't do anything right now. However, it helps
future-proof the driver so that if we ever turn the GSC on we won't have
to remember to extend this WA.
v2: don't use VERSION_RANGE from 2001 to 2004 (Matt)
Lucas De Marchi [Fri, 13 Jun 2025 20:00:37 +0000 (13:00 -0700)]
drm/xe/guc: Default log level to non-verbose
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:16 +0000 (12:26 -0700)]
drm/xe/oa: Assign hwe for OAM_SAG
Because OAM_SAG doesn't have an attached hwe, assign another hwe belonging
to the same gt (and different OAM unit) to OAM_SAG. A hwe is needed for
batch submissions to program OA HW.
v2: Assign an engine with a valid OA unit for OAM_SAG (Umesh)
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:15 +0000 (12:26 -0700)]
drm/xe/oa: Introduce stream->oa_unit
Previously, the oa_unit associated with an OA stream was derived from hwe
associated with the stream (stream->hwe->oa_unit). This breaks with OAM_SAG
since OAM_SAG does not have any attached hardware engines. Resolve this by
introducing stream->oa_unit and stop depending on stream->hwe.
Ashutosh Dixit [Fri, 6 Jun 2025 19:26:13 +0000 (12:26 -0700)]
drm/xe/oa/uapi: Expose media OA units
On Xe2+ platforms, media engines are attached to "SCMI" OA media (OAM)
units. One or more SCMI OAM units might be present on a platform. In
addition there is another OAM unit for global events, called
OAM-SAG. Performance metrics for media workloads can be obtained from these
OAM units, similar to OAG.
Expose these OAM units for userspace to use. OAM-SAG is exposed as an OA
unit without any attached engines.
Bspec: 70819, 67103, 63844, 72572, 74476, 61284
v2: Fix xe_gt_WARN_ON in __hwe_oam_unit for < 12.7 platforms
v3: Return XE_OA_UNIT_INVALID for < 12.7 to indicate no OAM units
v4: Move xe_oa_print_oa_units() to separate patch
v5: Introduce DRM_XE_OA_UNIT_TYPE_OAM_SAG
v6: Introduce DRM_XE_OA_CAPS_OAM
Ville Syrjälä [Thu, 12 Jun 2025 14:50:18 +0000 (17:50 +0300)]
drm/i915/dsb: Disable the GOSUB interrupt
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:17 +0000 (17:50 +0300)]
drm/i915/dsb: Move the DSB_PMCTRL* reset out of intel_dsb_finish()
When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:16 +0000 (17:50 +0300)]
drm/i915/dsb: Garbage collect the MMIO DEwake stuff
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:15 +0000 (17:50 +0300)]
drm/i915/dsb: Introduce intel_dsb_exec_time_us()
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Ville Syrjälä [Thu, 12 Jun 2025 14:50:13 +0000 (17:50 +0300)]
drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Matthew Brost [Thu, 12 Jun 2025 17:28:50 +0000 (10:28 -0700)]
drm/xe: Move LRC_ENGINE_ID_PPHWSP_OFFSET outside of parallel offset
The parallel scratch layout spans 2k and LRC_ENGINE_ID_PPHWSP_OFFSET
lands within than space. This happens to be ok as the offset lands in
reserved part of guc_sched_wq_desc, but for future safety move
LRC_ENGINE_ID_PPHWSP_OFFSET to the unused offset of 1024 below parallel
scratch layout.
André Almeida [Tue, 17 Jun 2025 12:49:49 +0000 (09:49 -0300)]
drm/amdgpu: Make use of drm_wedge_task_info
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
André Almeida [Tue, 17 Jun 2025 12:49:47 +0000 (09:49 -0300)]
drm/doc: Add a section about "Task information" for the wedge API
Add a section about "Task information" for the wedge API.
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-5-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
André Almeida [Tue, 17 Jun 2025 12:49:46 +0000 (09:49 -0300)]
drm: Create a task info option for wedge events
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
Michal Wajdeczko [Sat, 14 Jun 2025 18:24:46 +0000 (20:24 +0200)]
drm/xe/tests: Convert xe_pci tests to parametrized tests
Instead of looping over known IP descriptors within single test
case, without any diagnostics which IP descriptor is eventually
broken, define kunit parameter generators with IP descriptors,
and make existing xe_pci tests fully parametrized:
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250614182446.2024-1-michal.wajdeczko@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Lucas De Marchi [Wed, 11 Jun 2025 19:38:37 +0000 (12:38 -0700)]
drm/xe: Fix kconfig prompt
The xe driver is the official driver for Intel Xe2 and later, while
maintaining experimental support for earlier GPUs. Reword the help
message accordingly.
Matt Roper [Fri, 13 Jun 2025 21:47:53 +0000 (14:47 -0700)]
drm/xe/pat: Consolidate PAT programming logic for pre-Xe2 and post-Xe2
Now that the PAT settings for the new special entries introduced by Xe2
are decided during early software init and left NULL on platforms they
don't apply to, there's no need to keep separate programming functions
for pre-Xe2 and post-Xe2 platforms. Consolidate down to a single pair
of programming functions (mcr and non-mcr) that can be used on any
platform.
Matt Roper [Fri, 13 Jun 2025 21:47:52 +0000 (14:47 -0700)]
drm/xe/pat: Determine ATS / PTA programming during early sw init
Decide whether programming of the special ATS and PTA PAT entries is
necessary (and which entries should be programmed) during early software
initialization rather than hardcoding this into the 'program' functions.
Future platforms may want to re-use the same functions but utilize
different special entry values. Consolidating all of the decisions
into one place keeps things simple.
accel/ivpu: Add turbo flag to the DRM_IVPU_CMDQ_CREATE ioctl
Introduce a new parameter to the DRM_IVPU_CMDQ_CREATE ioctl,
enabling turbo mode for jobs submitted via the command queue.
Turbo mode allows jobs to run at higher frequencies,
potentially improving performance for demanding workloads.
Also adds the IVPU_TEST_MODE_TURBO_DISABLE flag to allow test
mode to explicitly disable turbo mode requested by the application.
The IVPU_TEST_MODE_TURBO mode has been renamed to
IVPU_TEST_MODE_TURBO_ENABLE for clarity and consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250605162001.1237789-1-maciej.falkowski@linux.intel.com
Add support for Wildcat Lake (WCL) CPUs.
Wildcat Lake contains NPU5 just like Panther Lake
hence the initial support is very simple and adds
only PCI IDs.
video: Make global edid_info depend on CONFIG_FIRMWARE_EDID
Protect global edid_info behind CONFIG_FIRMWARE_EDID and remove
the config tests for CONFIG_X86. Makes edid_info available iff
its option has been enabled.
video: Make CONFIG_FIRMWARE_EDID generally available
DRM drivers such as efidrm and vesadrm can export firmware EDID
data to userspace. Make the related option CONFIG_FIRMWARE_EDID
available without CONFIG_FB. Make it depend on X86, which is
currently the only architecture providing EDID information.
drivers/video/fbdev/via/via-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/via/via_i2c.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sis/sis_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used outside of their module. Some of
the symbols are not used anywhere, so remove the functions entirely.
Also remove the related, but unused, define SISFB_HAVE_MALLOC_NEW.
drivers/video/fbdev/omap2/omapfb/dss/dpi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/sdi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/apply.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/display.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/output.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/overlay.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/venc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/vrfb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcd_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcdc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/omapfb_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/g450_pll.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_DAC1064.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_Ti3026.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_accel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_base.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_g450.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_misc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_iplan2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_planar.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbcopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_ddc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_defio.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_io_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_sys_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcmap.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbmon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/modedb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/svgalib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/syscopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/macmodes.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sbuslib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/wmt_ge_rops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_mock_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_agp_backend.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_backup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_vm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_device.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_execbuf_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_pool.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_range_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_resource.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_tt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-10-tzimmermann@suse.de
drivers/gpu/drm/scheduler/sched_entity.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_fence.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-9-tzimmermann@suse.de
drivers/gpu/drm/drm_panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_backlight_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_orientation_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-8-tzimmermann@suse.de
drivers/gpu/drm/drm_gem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_framebuffer_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_ttm_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_vram_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-7-tzimmermann@suse.de
drivers/gpu/drm/display/drm_bridge_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_aux_bus.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_cec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_mst_topology.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_tunnel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dsc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_audio_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_notifier_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_scdc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-6-tzimmermann@suse.de
drivers/gpu/drm/clients/drm_client_setup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_event.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_modeset.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_shmem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_ttm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-5-tzimmermann@suse.de
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
drivers/gpu/drm/drm_atomic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_uapi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_auth.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_buddy.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_color_mgmt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_damage_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_debugfs_crc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_drv.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_edid.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_exec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_dma_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_file.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_flip_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_format_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpusvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpuvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_managed.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dbi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mode_config.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_lock.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_print.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_privacy_screen.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_self_refresh_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_simple_kms_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_suballoc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_syncobj.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vblank_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vma_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_writeback.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/lib/drm_random.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/tests/drm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-3-tzimmermann@suse.de
Linus Torvalds [Sun, 15 Jun 2025 16:14:27 +0000 (09:14 -0700)]
Merge tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
Sami Tolvanen [Sat, 14 Jun 2025 00:55:33 +0000 (00:55 +0000)]
gendwarfksyms: Fix structure type overrides
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7b9
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7b9 ("gendwarfksyms: Add a kABI rule to override type strings") Reported-by: Giuliano Procida <gprocida@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 14 Jun 2025 16:25:22 +0000 (09:25 -0700)]
Merge tag 'block-6.16-20250614' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
Linus Torvalds [Sat, 14 Jun 2025 15:44:54 +0000 (08:44 -0700)]
Merge tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
projects / thirdparty / kernel / linux.git / log
