Jie Zhang [Tue, 23 May 2006 03:58:33 +0000 (03:58 +0000)]
* elf32-bfin.c (bfin_check_relocs): Use __GLOBAL_OFFSET_TABLE_
instead of _GLOBAL_OFFSET_TABLE_.
(bfin_relocate_section): Ditto.
(_bfin_create_got_section): Ditto.
(elf32_bfinfdpic_create_dynamic_sections): Use
__PROCEDURE_LINKAGE_TABLE_ instead of _PROCEDURE_LINKAGE_TABLE_.
(bfin_finish_dynamic_symbol): Use __DYNAMIC instead of _DYNAMIC.
bfd/
* elflink.c (_bfd_elf_add_dynamic_entry): Remove DT_TEXTREL
check.
(bfd_elf_final_link): Add a late DT_TEXTREL check.
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): Define.
(mips_elf_create_dynamic_relocation): Set DF_TEXTREL.
(_bfd_mips_elf_check_relocs): Delete MIPS_READONLY_SECTION.
Use MIPS_ELF_READONLY_SECTION.
(_bfd_mips_elf_size_dynamic_sections): Clear DF_TEXTREL after
creating DT_TEXTREL.
(_bfd_mips_elf_finish_dynamic_sections): Clear textrel markers
if no text relocations were generated.
ld/testsuite/
* ld-mips-elf/textrel-1.d: Relax some patterns.
(check in missing file)
* win32-nat.c (cygwin_exceptions): New variable.
(handle_exception): Treat a cygwin exception like a normal exception if
cygwin_exceptions is true.
(_initialize_win32_nat): Add "set cygwin-exceptions" handler.
* win32-nat.c (cygwin_exceptions): New variable.
(handle_exception): Treat a cygwin exception like a normal exception if
cygwin_exceptions is true.
(_initialize_win32_nat): Add "set cygwin-exceptions" handler.
Thiemo Seufer [Fri, 19 May 2006 22:48:13 +0000 (22:48 +0000)]
* gas/mips/vxworks1-el.d, gas/mips/vxworks1-xgot-el.d: Add little
endian testcases.
* gas/mips/vxworks1.d, gas/mips/vxworks1-xgot.d: Build as big endian.
* gas/mips/mips.exp: Run new testcases.
Fred Fish [Fri, 19 May 2006 20:42:47 +0000 (20:42 +0000)]
Checked in under the 'obvious fix rule'
2006-05-19 Fred Fish <fnf@specifix.com>
* Makefile.in: Fix spelling of 'explicitly' and 'explicit'.
* dwarfread.c: Fix spelling of 'unexpected'.
* mips-tdep.c: Fix spelling of 'possible' and 'Determine'.
* stack.c: Fix spelling of 'RETURN_VALUE'.
Thiemo Seufer [Fri, 19 May 2006 13:03:06 +0000 (13:03 +0000)]
* config/tc-mipc.c (ISA_HAS_ODD_SINGLE_FPR): New define.
(mips_oddfpreg_ok): New function.
(mips_ip): Use it.
-------------------------------------------------------------------
Alan Modra [Fri, 19 May 2006 00:51:28 +0000 (00:51 +0000)]
* elf.c (elf_fake_sections): Formatting.
(assign_file_positions_for_load_sections): Only add SEC_ALLOC
sections to p_memsz. Remove hack for PT_NOTE sections. Allow
section alignment to increase p_align for PT_LOAD.
(assign_file_positions_for_non_load_sections): Remove ARM BPABI
hack for PT_DYNAMIC. Instead, set p_filesz for all segments
other than PT_LOAD, and PT_NOTE in core.
Fred Fish [Thu, 18 May 2006 19:34:01 +0000 (19:34 +0000)]
Reviewed and approved by Daniel Jacobowitz <drow@false.org>
2006-05-18 Fred Fish <fnf@specifix.com>
* gdb.base/a2-run.exp: Allow part of test to run when args aren't
required. Check for spurious output after program exits normally.
Joel Brobecker [Tue, 16 May 2006 19:43:57 +0000 (19:43 +0000)]
* version.in (version.in): Bump version number to 6.5.50 now
that the gdb-6.5 branch has been created.
* NEWS: Create a new section for changes that are included
since gdb-6.5. Name the "since gdb-6.4" section as the "in gdb-6.5"
section.
Jim Blandy [Tue, 16 May 2006 17:55:21 +0000 (17:55 +0000)]
gdb/ChangeLog:
2006-05-16 Jim Blandy <jimb@codesourcery.com>
* MAINTAINERS (Authorized Committers): Gaius Mulley has accepted
the Global Maintainers' invitation to be an authorized committer
for the Modula-2 support.
Bob Wilson [Mon, 15 May 2006 17:03:15 +0000 (17:03 +0000)]
bfd:
* elf32-xtensa.c (check_loop_aligned): Fix reversed check for
undefined opcode. Clean up assertions.
(narrow_instruction, widen_instruction): Remove "do_it" parameters.
Factor most of the code into separate functions....
(can_narrow_instruction, can_widen_instruction): New.
(prev_instr_is_a_loop): New.
(compute_ebb_proposed_actions): Combine error handling code for
decode errors. Replace call to insn_decode_len with inline code.
Use can_narrow_instruction and can_widen_instruction. Handle errors
from call to xtensa_opcode_is_loop.
(relax_section): Adjust calls to narrow_instruction and
widen_instruction.
gas:
* config/tc-xtensa.c (is_direct_call_opcode, is_branch_jmp_to_next,
xg_assemble_vliw_tokens, xtensa_mark_narrow_branches,
xtensa_fix_short_loop_frags, is_local_forward_loop, relax_frag_immed):
Handle errors from calls to xtensa_opcode_is_* functions.
Nick Roberts [Sun, 14 May 2006 22:27:26 +0000 (22:27 +0000)]
(gdbmi-send): Correct regexp for repeat commands.
(gdbmi): Use new variable name gdb-pc-address.
(gdbmi-frame-handler): Use new variable name gdb-pc-address.
Check that a match has been found.
Thiemo Seufer [Sun, 14 May 2006 15:35:22 +0000 (15:35 +0000)]
[ gas/ChangeLog ]
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
Gaius Mulley [Sat, 13 May 2006 15:46:38 +0000 (15:46 +0000)]
2006-05-13 Gaius Mulley <gaius@glam.ac.uk>
* gdb/m2-lang.h: added function extern prototypes for m2_is_long_set
and get_long_set_bounds.
* gm2/m2-typeprint.c: This file has been completely
replaced to reflect the Modula-2 syntax rather than call the
c_print_type function.
(m2_print_type): walk the Modula-2 type tree.
(m2_type_name): added.
(m2_range): added.
(m2_typedef): added.
(m2_array): added.
(m2_pointer): added.
(m2_ref): added.
(m2_unknown): added.
(m2_union): added.
(m2_procedure): added.
(m2_print_bounds): added.
(m2_short_set): added.
(m2_is_long_set): added.
(m2_get_discrete_bounds): added.
(m2_is_long_set_of_type): added.
(m2_long_set): added.
(m2_record_fields): added.
(m2_enum): added.
* gdb/dwarf2read.c: added ability to detect the language Modula-2
and handle SET and CHAR types.
(read_set_type): added.
(process_die): call read_set_type.
(read_base_type): modifed signed/unsigned char handling for Modula-2.
(set_cu_language): added Modula-2 case clause.
* gdb/m2-valprint.c: complete replacement so that Modula-2 values are
printed rather than call the C language routines.
(print_function_pointer_address): added.
(get_long_set_bounds): added.
(m2_print_long_set): added.
(print_unpacked_pointer): added.
(print_variable_at_address): added.
(m2_val_print): replaced.