INFO, NOTIFY, OPTIONS, REFER, and MESSAGE requests
were not checking the topmost Via to determine where
to send the response. Adding check_via calls to those
request handlers solves this.
When a SIP request or response arrives for a dialog with an associated Asterisk channel, and the lock on that channel cannot be obtained because it is held by another thread, instead of dropping the request/response, queue it for later processing when the channel lock becomes available.
Answer the channel if it has not already been answered and we've already found a valid profile for followme.
(closes issue #14140)
Reported by: dimas
Patches:
14140.patch uploaded by dimas
........
Update the queues.conf.sample documentation to mention that you need to preload chan_local.so as well if you plan on using Local channels for queue members, and you're preloading pbx_config.so.
Leif Madsen [Wed, 7 Jan 2009 14:33:38 +0000 (14:33 +0000)]
Merged revisions 167373 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r167373 | lmadsen | 2009-01-07 09:26:19 -0500 (Wed, 07 Jan 2009) | 1 line
Update the sip-friends.sql file to use the non-deprecated 'defaultname' instead of 'username' and remove an extra comma that would cause the script to fail as-is
........
A couple of changes to T.38 SDP attribute handling
There are some boolean attributes for T.38 such
as T38FaxFillBitRemoval, T38FaxTranscodingMMR, and
T38FaxTranscodingJBIG. By simply being present, we
should treat these as a "true" value. The current
code, however, was requiring a 1 or 0 as the value
of the attribute in order to parse it. This is due
to the fact that there are some T.38 endpoints and
gateways that also transmit this information
incorrectly. This patch follows the "be liberal in
what you accept and strict in what you send"
philosophy by accepting both the correctly- and
incorrectly-formatted attributes, but only sending
information as it is supposed to be sent.
It was also discovered that a particular type of
T.38 gateway sends some non-standard T.38 SDP
attributes. Instead of using T38FaxMaxDatagram
and T38MaxBitRate, it used T38MaxDatagram and
T38FaxMaxRate respectively. We now will properly
accept these attributes as well.
Note that there are a lot of patches cited in
the below commit message template. This is
because the person who submitted these patches is
an awesome person and wrote 1.4, 1.6.0, and 1.6.1
variants.
(closes issue #13976)
Reported by: linulin
Patches:
chan_sip.c.1.4-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.0-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.1-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.4-relaxedT38_update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.0-relaxedT38_update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.1-relaxedT38_update1.diff uploaded by arcivanov (license 648)
Tested by: arcivanov
More clearly explain that quote marks are no longer necessary.
(closes issue #13718)
Reported by: davidw
Patches:
20081020__bug13718.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
........
When parsing environment variable ASTERISK_PROMPT, make sure to proceed to the next character when a non format specifier is used (no %). Otherwise, the while loop looking for the null byte will never exit.
Update app_queue to deal with the removal of AST_PBX_KEEPALIVE
When placing a call to a queue which ran a gosub on the member's
channel, Asterisk would crash every time, stemming from the fact
that the member's channel was being hung up unexpectedly when the
Gosub completed. The necessary change was pretty much copied and
pasted from app_dial's similar changes made last week.
I also took the opportunity to change a LOG_DEBUG message in
app_dial to use ast_debug. I am guessing this was due to a direct
merge from 1.4 that was not corrected to use trunk's preferred
syntax.
There is no section 22.2.2 in rfc 3261. I believe 26.2.2 is what was meant:
Note that in the SIPS URI scheme, transport is independent of TLS,
and thus "sips:alice@atlanta.com;transport=tcp" and
"sips:alice@atlanta.com;transport=sctp" are both valid (although
note that UDP is not a valid transport for SIPS). The use of
"transport=tls" has consequently been deprecated, partly because
it was specific to a single hop of the request. This is a change
since RFC 2543.
........
Steve Murphy [Wed, 24 Dec 2008 00:52:12 +0000 (00:52 +0000)]
Merged revisions 166665 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
Due to non-symmetrical updating, I had some fairly
interesting conflicts to straighten out in this
release. The changes were such that I was compelled
to run thru all the same tests as trunk, which turned
up some problems, which I fixed.
Merged revisions 166093 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Fix a deadlock relating to channel locks and autoservice
It has been discovered that if a channel is locked prior
to a call to ast_autoservice_stop, then it is likely that
a deadlock will occur. The reason is that the call to
ast_autoservice_stop has a check built into it to be sure
that the thread running autoservice is not currently trying
to manipulate the channel we are about to pull out of
autoservice.
The autoservice thread, however, cannot advance beyond where
it currently is, though, because it is trying to acquire
the lock of the channel for which autoservice is attempting
to be stopped.
The gist of all this is that a channel MUST NOT be locked
when attempting to stop autoservice on the channel.
In this particular case, the channel was locked by a call
to ast_read. A call to ast_exists_extension led to autoservice
being started and stopped due to the existence of dialplan
switches.
It may be that there are future commits which handle the same
symptoms but in a different location, but based on my looks through
the code, it is very rare to see a construct such as this one.
Russell Bryant [Mon, 22 Dec 2008 17:14:18 +0000 (17:14 +0000)]
Merged revisions 166282 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r166282 | russell | 2008-12-22 11:09:36 -0600 (Mon, 22 Dec 2008) | 12 lines
Introduce ast_careful_fwrite() and use in AMI to prevent partial writes.
This patch introduces a function to do careful writes on a file stream which
will handle timeouts and partial writes. It is currently used in AMI to
address the issue that has been reported. However, there are probably a few
other places where this could be used.
(closes issue #13546)
Reported by: srt
Tested by: russell
http://reviewboard.digium.com/r/104/
Mark Michelson [Mon, 22 Dec 2008 16:30:25 +0000 (16:30 +0000)]
When merging the fix for issue #14118, I found that
the issue didn't affect 1.6.0, but in this case that's
not an especially good thing, because it means that
the fix for issue #13496 was not merged into 1.6.0 in
the first place. This commit kills two birds with one
stone by putting both fixes in the 1.6.0 branch
Mark Michelson [Mon, 22 Dec 2008 16:12:34 +0000 (16:12 +0000)]
Back these changes out for now. The initial refcounting
for filestreams didn't get merged into 1.6.0. I'll have
to get that in first and then put this change in
Fix a file playback crash and explicitly initialize values in func_timeout.c
A crash was brought up on the bugtracker. The first run through valgrind
was full of legitimate complaints of uninitialized values in func_timeout when
setting a response timeout. These were fixed but the crash persisted.
A second run through showed the real problem. The reference counting used
for filestreams was incorrect because there were some missing increments
when a frame was read from a format module.
Record the previous port in the temporary address structure so that the comparison does not treat the host as having changed even if it did not. This would have been uninitialized before and would have led to a baddddd port.
(closes issue #13628)
Reported by: pananix
Patches:
bug13628.patch uploaded by jpeeler (license 325)
Tested by: file, blitzrage
........
Russell Bryant [Mon, 22 Dec 2008 14:18:08 +0000 (14:18 +0000)]
Merged revisions 166258 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r166258 | russell | 2008-12-22 08:16:54 -0600 (Mon, 22 Dec 2008) | 26 lines
Remove AST_PBX_KEEPALIVE usage from res_agi.
This patch removes the usage of AST_PBX_KEEPALIVE from res_agi. The only usage
was for the AGI command, "asyncagi break". This patch removes this feature.
Normally, a feature would not be removed like this. However, this code is
broken and usage of it will result in a memory leak.
Usage of this feature will make the AGI code return a result of
AST_PBX_KEEPALIVE. The PBX handler assumes that another thread has assumed
ownership of the channel. The channel thread will exit without destroying the
channel. Unfortunately, _no_ thread has ownership of the channel at this
point. There are a couple of serious problems here:
1) The only way to recover the caller is to issue a channel redirect. This
will work, but this will be done with a masquerade, and the old ast_channel
structure will be lost.
2) Until the channel redirect happens, there is no code servicing the channel.
That means nothing is reading audio or handling events coming from the
channel. This is very bad.
The recommended way to get this same "break" functionality is to issue the
redirect while the channel is still being handled by the AGI code. That way,
there will be no memory leak, and there will be no period of time that the
channel is not being serviced.
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
Russell Bryant [Fri, 19 Dec 2008 14:43:13 +0000 (14:43 +0000)]
Blocked revisions 165883 via svnmerge
........
r165883 | russell | 2008-12-19 08:42:51 -0600 (Fri, 19 Dec 2008) | 8 lines
Introduce commit message formatting guidelines.
This documents the recommended outline to use for commit message. It also
covers information on special tags that can be used in commit messages, as well
as the template functionality that is available on bugs.digium.com.
Add mutexes around accesses to the IMAP library interface. This prevents
certain crashes, especially when shared mailboxes are used.
(closes issue #13653)
Reported by: howardwilkinson
Patches:
asterisk-1.4.21.2-appvoicemail-sharedimap-lock.patch uploaded by howardwilkinson (license 590)
Tested by: jpeeler
........
................
Russell Bryant [Thu, 18 Dec 2008 21:45:38 +0000 (21:45 +0000)]
Merged revisions 165801 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r165801 | russell | 2008-12-18 15:44:47 -0600 (Thu, 18 Dec 2008) | 19 lines
Merged revisions 165796 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165796 | russell | 2008-12-18 15:39:25 -0600 (Thu, 18 Dec 2008) | 11 lines
Make ast_carefulwrite() be more careful.
This patch handles some additional cases that could result in partial writes
to the file description. This was done to address complaints about partial
writes on AMI.
(issue #13546) (more changes needed to address potential problems in 1.6)
Reported by: srt
Tested by: russell
Review: http://reviewboard.digium.com/r/99/
Russell Bryant [Thu, 18 Dec 2008 19:40:14 +0000 (19:40 +0000)]
Merged revisions 165723 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r165723 | russell | 2008-12-18 13:33:42 -0600 (Thu, 18 Dec 2008) | 14 lines
Remove the need for AST_PBX_KEEPALIVE with the GoSub option from Dial.
This is part of an effort to completely remove AST_PBX_KEEPALIVE and other
similar return codes from the source. While this usage was perfectly safe,
there are others that are problematic. Since we know ahead of time that
we do not want to PBX to destroy the channel, the PBX API has been changed
so that information can be provided as an argument, instead, thus removing
the need for the KEEPALIVE return value.
Further changes to get rid of KEEPALIVE and related code is being done by
murf. There is a patch up for that on review 29.
Only care about a compatible codec for early bridging if we are actually bridging to another channel. If we are not we actually want to bring the audio back to us.
(closes issue #13545)
Reported by: davidw
........
................
Do not crash if we are not passed in a followme id.
(closes issue #14106)
Reported by: ys
Patches:
app_followme.c.2.diff uploaded by ys (license 281)
........
................
Remove duplicate code from the ast_str API. We now use __AST_STR_* to
access 'struct ast_str' members, but this must only be used inside the API implementation.
Reverse the fix from issue #6176 and add proper handling for that issue.
(Closes issue #13962, closes issue #13363)
Fixed by myself (license 14)
........
................
Polycom phones close the connection after reading a little bit of the firmware files, we should stop sending in that case. Also, make that case print out a debug statement instead of a scary WARNING.
........
Use the create_vm_state_from_user function in a place where
it was not being used before. Also, I've moved the urgent
folder check in messagecount() up a bit so that the flow is
a bit better.
This was something I noticed while taking a look at issue
#13973, although I don't think this is the underlying cause
of the issue.
A possibly "horrible fix" for a "horribly broken"
situation.
As stuff shifts around in the asterisk code, the
miscellaneous inclusions from the standalone stuff
gets broken. There's no easy fix for this situation.
I made sure that everything in utils builds without
problem ***AND*** that aelparse runs the regressions
correctly with the following make menuselect options
both on and off:
I think from now on, I'm going to #undef
all these features in the various utils native
files; I guess I could do the same for the
copied-in files, surrounded by STANDALONE ifdef.
A standalone isn't going to care about threads,
mutexes, etc.
After looking through SIP registration code most of the day, this
is one of the few things I could find that was just plain wrong.
Even though it probably isn't possible for it to happen, it seems weird
to have code that checks if a pointer is NULL and then immediately dereferences
that pointer if it was NULL.
Russell Bryant [Tue, 16 Dec 2008 21:13:18 +0000 (21:13 +0000)]
Merged revisions 164877 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r164877 | russell | 2008-12-16 15:12:49 -0600 (Tue, 16 Dec 2008) | 14 lines
Merged revisions 164876 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164876 | russell | 2008-12-16 15:10:44 -0600 (Tue, 16 Dec 2008) | 6 lines
Do not dereference the channel if AST_PBX_KEEPALIVE has been returned.
This is a bug I noticed while looking at the code for app_macro. This return code
means that another thread has assumed ownership of the channel and it can no longer
be touched. (I hate this return code with a passion, by the way.)
Russell Bryant [Tue, 16 Dec 2008 20:43:16 +0000 (20:43 +0000)]
Merged revisions 164807 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r164807 | russell | 2008-12-16 14:41:51 -0600 (Tue, 16 Dec 2008) | 17 lines
Merged revisions 164806 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164806 | russell | 2008-12-16 14:35:25 -0600 (Tue, 16 Dec 2008) | 9 lines
Add "restart gracefully" to the AMI blacklist of CLI commands.
"module unload" was already identified as a command that can not be used
from the AMI. "restart gracefully" effectively unloads all modules, and will
run in to the same problems.
Add configuration options for finer control over how Asterisk handles having to poke all peers at seemingly the same time.
(closes issue #13217)
Reported by: cervajs
........
introduce 'core show sysinfo' for systems that dont have the Linux-ish sysinfo stuff but do have sysctl.
(closes issue #13433)
Reported by: mvanbaak
Patches:
2008121300_sysinfosysctl.diff.txt uploaded by mvanbaak (license 7)
with two free calls replaced with ast_free based on feedback on reviewboard
Review:
http://reviewboard.digium.com/r/91/
........
OK, Well this issue has had its share of flip-flopping.
I found the following:
1. the code in question, in ext_cmp1 in pbx.c, would not
allow two extensions that vary only by any dashes contained
within them, to be defined in the same context.
2. for input dialstrings, dashes are NOT ignored.
So, skipping them when sorting patterns seemed a bit silly.
Thus, you might declare ext 891 in a context, but
if you try dialing 8-9-1, it will NOT match 891.
So, I proposed to remove the code from ext_cmp1 to
skip the spaces and dashes. Just kept us from
declaring 891 and 8-9-1 in the same context,
forcing users to generate otherwise uselessly
obfuscated dialplan code to get the same effect.
Then, I tried out 1.4, and found that:
1. you can declare 891 and 8-9-1 in the
same context!
2. You can't define 891, and have 8-9-1 match
it! Nor can you define 8-9-1, and have 891
match it!
So, it appears that my proposal simply restores
the pbx to behaving as it did in 1.4.
Russell Bryant [Tue, 16 Dec 2008 17:15:43 +0000 (17:15 +0000)]
Merged revisions 164737 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r164737 | russell | 2008-12-16 11:14:01 -0600 (Tue, 16 Dec 2008) | 22 lines
Merged revisions 164736 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164736 | russell | 2008-12-16 11:06:29 -0600 (Tue, 16 Dec 2008) | 14 lines
Fix memory leak and invalid reporting issues with DEBUG_THREADLOCALS.
One issue was that the ast_mutex_* API was being used within the context of the
thread local data destructors. We would go off and allocate more thread local data
while the pthread lib was in the middle of destroying it all. This led to a memory
leak.
Another issue was an invalid argument being provided to the the object_add
API call.
(closes issue #13678)
Reported by: ys
Tested by: Russell
Be more detailed about why the include did not get included.
(closes issue #14071)
Reported by: kshumard
Patches:
pbx_config.patch.improvederroroutput.txt uploaded by kshumard (license 92)
........
Russell Bryant [Tue, 16 Dec 2008 16:02:22 +0000 (16:02 +0000)]
Merged revisions 164675 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
................
r164675 | russell | 2008-12-16 10:00:29 -0600 (Tue, 16 Dec 2008) | 19 lines
Merged revisions 164672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164672 | russell | 2008-12-16 09:56:37 -0600 (Tue, 16 Dec 2008) | 11 lines
Fix a memory leak related to the use of the "setvar" configuration option.
The problem was that these variables were being appended to the list of vars
on the sip_pvt every time a re-registration or re-subscription came in.
Since it's just a waste of memory to put them there unless the request was an
INVITE, then the fix is to check the request type before copying the vars.
(closes issue #14037)
Reported by: marvinek
Tested by: russell
When using externhost make sure the port gets set to the bindaddr port if one was not specified in the externhost value itself.
(closes issue #13634)
Reported by: performer
........
I added a sentence to clarify why - and ' ' are ignored in patterns
as per bug 14076. Leif says he'll put some stuff about it in the
extensions.conf sample, etc.
projects / thirdparty / asterisk.git / log
