Merge tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
Merge tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
Merge tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
Merge tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
Qiuxu Zhuo [Tue, 11 Mar 2025 08:09:40 +0000 (16:09 +0800)]
selftests/mincore: Allow read-ahead pages to reach the end of the file
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Ahmed Salem [Tue, 11 Feb 2025 23:16:17 +0000 (01:16 +0200)]
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Khaled Elnaggar [Sun, 26 Jan 2025 19:51:33 +0000 (21:51 +0200)]
selftests: tpm2: create a dedicated .gitignore
The tpm2 selftests produce two logs: SpaceTest.log and
AsyncTest.log. Only SpaceTest.log was listed in selftests/.gitignore,
while AsyncTest.log remained untracked.
This change creates a dedicated .gitignore in the tpm2/ directory to
manage these entries, keeping tpm2-specific patterns isolated from
parent .gitignore.
Fixed white-space errors during commit
Shuah Khan <skhan@linuxfoundation.org>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
Merge tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node should
be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint in
the module.
* tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Cleanup fprobe hash when module unloading
tracing: fprobe events: Fix possible UAF on modules
tracing: fprobe: Fix to lock module while registering fprobe
Merge tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Paolo Bonzini [Tue, 8 Apr 2025 09:49:31 +0000 (05:49 -0400)]
Merge tag 'kvmarm-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
Andy Shevchenko [Wed, 2 Apr 2025 12:20:01 +0000 (15:20 +0300)]
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Andy Shevchenko [Wed, 2 Apr 2025 12:20:00 +0000 (15:20 +0300)]
gpiolib: of: Fix the choice for Ingenic NAND quirk
The Ingenic NAND quirk has been added under CONFIG_LCD_HX8357 ifdeffery
which sounds quite wrong. Fix the choice for Ingenic NAND quirk
by wrapping it into own ifdeffery related to the respective driver.
gpio: TODO: track the removal of regulator-related workarounds
The GPIOD_FLAGS_BIT_NONEXCLUSIVE flag and devm_gpiod_unhinge() function
should be replaced with a better solution. The pwrseq subsystem is a good
candidate. GPIOs themselves should remain a unique resource. Add a task
for tracking the removal of these deprecated symbols.
MAINTAINERS: add more keywords for the GPIO subsystem entry
Add GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge as keywords to
the GPIO entry so that we get notified if anybody tries to use these
deprecated symbols. We'll drop them from here once we remove them from
the kernel.
This function was introduced as a workaround for an issue with resource
ownership in the regulator subsystem. Rather than passing the ownership
of a GPIO, we should make the regulator core be able to deal with
resources it didn't request. Deprecate this function so that we don't
get more users in the tree.
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
The non-exclusive GPIO request flag looks like a functional feature but
is in fact a workaround for a corner-case that got out of hand. It should
be removed so deprecate it officially so that nobody uses it anymore.
tracing: fprobe: Cleanup fprobe hash when module unloading
Cleanup fprobe address hash table on module unloading because the
target symbols will be disappeared when unloading module and not
sure the same symbol is mapped on the same address.
Note that this is at least disables the fprobes if a part of target
symbols on the unloaded modules. Unlike kprobes, fprobe does not
re-enable the probe point by itself. To do that, the caller should
take care register/unregister fprobe when loading/unloading modules.
This simplifies the fprobe state managememt related to the module
loading/unloading.
Will Deacon [Mon, 7 Apr 2025 15:27:55 +0000 (16:27 +0100)]
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
The pKVM FF-A proxy rejects FF-A requests other than FFA_VERSION until
version negotiation is complete, which is signalled by setting the
global 'has_version_negotiated' variable.
To avoid excessive locking, this variable is checked directly from
kvm_host_ffa_handler() in response to an FF-A call, but this can race
against another CPU performing the negotiation and potentially lead to
reading a torn value (incredibly unlikely for a 'bool') or problematic
re-ordering of the accesses to 'has_version_negotiated' and
'hyp_ffa_version' whereby a stale version number could be read by
__do_ffa_mem_xfer().
Use acquire/release primitives when writing 'has_version_negotiated'
with the version lock held and when reading without the lock held.
Cc: Sebastian Ene <sebastianene@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Quentin Perret <qperret@google.com> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Marc Zyngier <maz@kernel.org> Fixes: c9c012625e12 ("KVM: arm64: Trap FFA_VERSION host call in pKVM") Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250407152755.1041-1-will@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
__VA_OPT__ is a macro that is useful when some arguments can be present
or not to entirely skip some part of a definition. Unfortunately, it
is a too recent addition that some of the still supported old GCC
versions do not know about, and is anyway not part of C11 that is the
version used in the kernel.
Find a trick to remove this macro, typically '__VA_ARGS__ + 0' is a
workaround used in netlink.h which works very well here, as we either
expect:
- 0
- A positive value
- No value, which means the field should be 0.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503181330.YcDXGy7F-lkp@intel.com/ Fixes: 7ce0d16d5802 ("mtd: spinand: Add an optional frequency to read from cache macros") Cc: stable@vger.kernel.org Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.
mtd: inftlcore: Add error check for inftl_read_oob()
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.
Fixes: 8593fbc68b0d ("[MTD] Rework the out of band handling completely") Cc: stable@vger.kernel.org # v2.6+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Fix this by dropping the explicit test for a built-in
CONFIG_SPI_QPIC_SNAND completely. Kbuild handles multiple and mixed
obj-y/obj-m rules for the same object file fine.
Guixin Liu [Thu, 27 Mar 2025 03:23:49 +0000 (11:23 +0800)]
gpio: tegra186: fix resource handling in ACPI probe path
When the Tegra186 GPIO controller is probed through ACPI matching,
the driver emits two error messages during probing:
"tegra186-gpio NVDA0508:00: invalid resource (null)"
"tegra186-gpio NVDA0508:00: invalid resource (null)"
Fix this by getting resource first and then do the ioremap.
tools/include: make uapi/linux/types.h usable from assembly
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
Len Brown [Sun, 6 Apr 2025 18:49:20 +0000 (14:49 -0400)]
tools/power turbostat: v2025.05.06
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
KVM: arm64: selftests: Introduce and use hardware-definition macros
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Len Brown [Sun, 6 Apr 2025 15:18:39 +0000 (11:18 -0400)]
tools/power turbostat: report CoreThr per measurement interval
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
Justin Ernst [Wed, 19 Mar 2025 20:27:31 +0000 (15:27 -0500)]
tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f75256b ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
Uday Shankar [Mon, 31 Mar 2025 22:46:32 +0000 (16:46 -0600)]
kbuild: rpm-pkg: build a debuginfo RPM
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Daniel Gomez [Fri, 28 Mar 2025 14:28:37 +0000 (14:28 +0000)]
kconfig: merge_config: use an empty file as initfile
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sun, 22 Dec 2024 00:30:53 +0000 (09:30 +0900)]
nios2: migrate to the generic rule for built-in DTB
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Johan Korsnes [Sun, 23 Mar 2025 19:13:30 +0000 (20:13 +0100)]
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
This option was removed from Kconfig in 8c710f75256b ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Artur Rojek [Sun, 16 Feb 2025 17:55:44 +0000 (18:55 +0100)]
sh: Align .bss section padding to 8-byte boundary
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3c5 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Rob Landley <rob@landley.net> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
Nam Cao [Wed, 5 Feb 2025 10:55:20 +0000 (11:55 +0100)]
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:18 +0000 (11:55 +0100)]
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:17 +0000 (11:55 +0100)]
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Nam Cao [Wed, 5 Feb 2025 10:55:16 +0000 (11:55 +0100)]
hrtimers: Make callback function pointer private
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Nam Cao [Wed, 5 Feb 2025 10:55:11 +0000 (11:55 +0100)]
hrtimers: Switch to use __htimer_setup()
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Merge tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a race condition in the newly added eip93 driver"
* tag 'v6.15-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash
Merge tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix machine check handler _CIF_MCCK_GUEST bit setting by adding the
missing base register for relocated lowcore address
- Fix build failure on older linkers by conditionally adding the
-no-pie linker option only when it is supported
- Fix inaccurate kernel messages in vfio-ap by providing descriptive
error notifications for AP queue sharing violations
- Fix PCI isolation logic by ensuring non-VF devices correctly return
false in zpci_bus_is_isolated_vf()
- Fix PCI DMA range map setup by using dma_direct_set_offset() to add a
proper sentinel element, preventing potential overruns and
translation errors
- Cleanup header dependency problems with asm-offsets.c
- Add fault info for unexpected low-address protection faults in user
mode
- Add support for HOTPLUG_SMT, replacing the arch-specific "nosmt"
handling with common code handling
- Use bitop functions to implement CPU flag helper functions to ensure
that bits cannot get lost if modified in different contexts on a CPU
- Remove unused machine_flags for the lowcore
* tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Fix no AP queue sharing allowed message written to kernel log
s390/pci: Fix dev.dma_range_map missing sentinel element
s390/mm: Dump fault info in case of low address protection fault
s390/smp: Add support for HOTPLUG_SMT
s390: Fix linker error when -no-pie option is unavailable
s390/processor: Use bitop functions for cpu flag helper functions
s390/asm-offsets: Remove ASM_OFFSETS_C
s390/asm-offsets: Include ftrace_regs.h instead of ftrace.h
s390/kvm: Split kvm_host header file
s390/pci: Fix zpci_bus_is_isolated_vf() for non-VFs
s390/lowcore: Remove unused machine_flags
s390/entry: Fix setting _CIF_MCCK_GUEST with lowcore relocation
Merge tag '6.15-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- reconnect fixes: three for updating rsize/wsize and an SMB1 reconnect
fix
- RFC1001 fixes: fixing connections to nonstandard ports, and negprot
retries
- fix mfsymlinks to old servers
- make mapping of open flags for SMB1 more accurate
- permission fixes: adding retry on open for write, and one for stat to
workaround unexpected access denied
- add two new xattrs, one for retrieving SACL and one for retrieving
owner (without having to retrieve the whole ACL)
- fix mount parm validation for echo_interval
- minor cleanup (including removing now unneeded cifs_truncate_page)
* tag '6.15-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: Implement is_network_name_deleted for SMB1
cifs: Remove cifs_truncate_page() as it should be superfluous
cifs: Do not add FILE_READ_ATTRIBUTES when using GENERIC_READ/EXECUTE/ALL
cifs: Improve SMB2+ stat() to work also without FILE_READ_ATTRIBUTES
cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES
cifs: Fix querying and creating MF symlinks over SMB1
cifs: Fix access_flags_to_smbopen_mode
cifs: Fix negotiate retry functionality
cifs: Improve handling of NetBIOS packets
cifs: Allow to disable or force initialization of NetBIOS session
cifs: Add a new xattr system.smb3_ntsd_owner for getting or setting owner
cifs: Add a new xattr system.smb3_ntsd_sacl for getting or setting SACLs
smb: client: Update IO sizes after reconnection
smb: client: Store original IO parameters and prevent zero IO sizes
smb:client: smb: client: Add reverse mapping from tcon to superblocks
cifs: remove unreachable code in cifs_get_tcp_session()
cifs: fix integer overflow in match_server()
Merge tag 'ntb-6.15' of https://github.com/jonmason/ntb
Pull ntb fixes from Jon Mason:
"Bug fixes for NTB Switchtec driver mw negative shift, Intel NTB link
status db, ntb_perf double unmap (in error case), and MSI 64bit
arithmetic.
Also, add new AMD NTB PCI IDs, update AMD NTB maintainer, and pull in
patch to reduce the stack usage in IDT driver"
* tag 'ntb-6.15' of https://github.com/jonmason/ntb:
ntb_hw_amd: Add NTB PCI ID for new gen CPU
ntb: reduce stack usage in idt_scan_mws
ntb: use 64-bit arithmetic for the MSI doorbell mask
MAINTAINERS: Update AMD NTB maintainers
ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk()
ntb: intel: Fix using link status DB's
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
Eric Biggers [Tue, 1 Apr 2025 22:15:59 +0000 (15:15 -0700)]
lib/crc: document all the CRC library kconfig options
Previous commits removed all the original CRC kconfig help text, since
it was oriented towards people configuring the kernel, and the options
are no longer user-selectable. However, it's still useful for there to
be help text for kernel developers. Add this.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-7-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
Miroslav reported that the changes for handling the inconsistencies in the
coarse time getters result in a regression on the adjtimex() side.
There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
Userspace expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Revert the change, so that the established expectations of user space
implementations (ntpd, chronyd) are restored. The re-introduced
inconsistency of the coarse time getters will be addressed in a subsequent
fix.
Fixes: 757b000f7b93 ("timekeeping: Fix possible inconsistencies in _COARSE clockids") Reported-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/Z-qsg6iDGlcIJulJ@localhost
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
Merge tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the merge window,
everything is driver specific with nothing standing out particularly"
* tag 'spi-fix-v6.15-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835: Restore native CS probing when pinctrl-bcm2835 is absent
spi: bcm2835: Do not call gpiod_put() on invalid descriptor
spi: cadence-qspi: revert "Improve spi memory performance"
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
spi: fsl-qspi: use devm function instead of driver remove
spi: SPI_QPIC_SNAND should be tristate and depend on MTD
spi-rockchip: Fix register out of bounds access
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
Merge tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
Thomas Gleixner [Fri, 4 Apr 2025 14:51:19 +0000 (16:51 +0200)]
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
Frank reported, that the common irq_force_complete_move() breaks the out of
tree build of ia64. The reason is that ia64 uses the migration code, but
does not have hierarchical interrupt domains enabled.
This went unnoticed in mainline as both x86 and RISC-V have hierarchical
domains enabled. Not that it matters for mainline, but it's still
inconsistent.
Use irqd_get_parent_data() instead of accessing the parent_data field
directly. The helper returns NULL when hierarchical domains are disabled
otherwise it accesses the parent_data field of the domain.
No functional change.
Fixes: 751dc837dabd ("genirq: Introduce common irq_force_complete_move() implementation") Reported-by: Frank Scheiner <frank.scheiner@web.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frank Scheiner <frank.scheiner@web.de> Link: https://lore.kernel.org/all/87h634ugig.ffs@tglx
Jakub Kicinski [Thu, 3 Apr 2025 14:56:36 +0000 (07:56 -0700)]
selftests: net: amt: indicate progress in the stress test
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
It is confusing to see 'host' and 'domain' to be used as 'domain'. Given
this header is all about domains, switch the remaining 'host' uses to
'domain'.
Jakub Kicinski [Thu, 3 Apr 2025 01:37:06 +0000 (18:37 -0700)]
netlink: specs: rt_route: pull the ifa- prefix out of the names
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in route-attrs and metrics and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Jakub Kicinski [Thu, 3 Apr 2025 01:37:05 +0000 (18:37 -0700)]
netlink: specs: rt_addr: pull the ifa- prefix out of the names
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
====================
net: make memory provider install / close paths more common
We seem to be fixing bugs in config path for devmem which also exist
in the io_uring ZC path. Let's try to make the two paths more common,
otherwise this is bound to keep happening.
projects / thirdparty / linux.git / log
